- 26 Sep, 2020 3 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== bonding/team: basic dev->needed_headroom support Both bonding and team drivers support non-ethernet devices, but missed proper dev->needed_headroom initializations. syzbot found a crash caused by bonding, I mirrored the fix in team as well. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Some devices set needed_headroom. If we ignore it, we might end up crashing in various skb_push() for example in ipgre_header() since some layers assume enough headroom has been reserved. Fixes: 1d76efe1 ("team: add support for non-ethernet devices") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
syzbot managed to crash a host by creating a bond with a GRE device. For non Ethernet device, bonding calls bond_setup_by_slave() instead of ether_setup(), and unfortunately dev->needed_headroom was not copied from the new added member. [ 171.243095] skbuff: skb_under_panic: text:ffffffffa184b9ea len:116 put:20 head:ffff883f84012dc0 data:ffff883f84012dbc tail:0x70 end:0xd00 dev:bond0 [ 171.243111] ------------[ cut here ]------------ [ 171.243112] kernel BUG at net/core/skbuff.c:112! [ 171.243117] invalid opcode: 0000 [#1] SMP KASAN PTI [ 171.243469] gsmi: Log Shutdown Reason 0x03 [ 171.243505] Call Trace: [ 171.243506] <IRQ> [ 171.243512] [<ffffffffa171be59>] skb_push+0x49/0x50 [ 171.243516] [<ffffffffa184b9ea>] ipgre_header+0x2a/0xf0 [ 171.243520] [<ffffffffa17452d7>] neigh_connected_output+0xb7/0x100 [ 171.243524] [<ffffffffa186f1d3>] ip6_finish_output2+0x383/0x490 [ 171.243528] [<ffffffffa186ede2>] __ip6_finish_output+0xa2/0x110 [ 171.243531] [<ffffffffa186acbc>] ip6_finish_output+0x2c/0xa0 [ 171.243534] [<ffffffffa186abe9>] ip6_output+0x69/0x110 [ 171.243537] [<ffffffffa186ac90>] ? ip6_output+0x110/0x110 [ 171.243541] [<ffffffffa189d952>] mld_sendpack+0x1b2/0x2d0 [ 171.243544] [<ffffffffa189d290>] ? mld_send_report+0xf0/0xf0 [ 171.243548] [<ffffffffa189c797>] mld_ifc_timer_expire+0x2d7/0x3b0 [ 171.243551] [<ffffffffa189c4c0>] ? mld_gq_timer_expire+0x50/0x50 [ 171.243556] [<ffffffffa0fea270>] call_timer_fn+0x30/0x130 [ 171.243559] [<ffffffffa0fea17c>] expire_timers+0x4c/0x110 [ 171.243563] [<ffffffffa0fea0e3>] __run_timers+0x213/0x260 [ 171.243566] [<ffffffffa0fecb7d>] ? ktime_get+0x3d/0xa0 [ 171.243570] [<ffffffffa0ff9c4e>] ? clockevents_program_event+0x7e/0xe0 [ 171.243574] [<ffffffffa0f7e5d5>] ? sched_clock_cpu+0x15/0x190 [ 171.243577] [<ffffffffa0fe973d>] run_timer_softirq+0x1d/0x40 [ 171.243581] [<ffffffffa1c00152>] __do_softirq+0x152/0x2f0 [ 171.243585] [<ffffffffa0f44e1f>] irq_exit+0x9f/0xb0 [ 171.243588] [<ffffffffa1a02e1d>] smp_apic_timer_interrupt+0xfd/0x1a0 [ 171.243591] [<ffffffffa1a01ea6>] apic_timer_interrupt+0x86/0x90 Fixes: f5184d26 ("net: Allow netdevices to specify needed head/tailroom") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
- 25 Sep, 2020 22 commits
-
-
Ivan Khoronzhuk authored
To start also "phy state machine", with UP state as it should be, the phy_start() has to be used, in another case machine even is not triggered. After this change negotiation is supposed to be triggered by SM workqueue. It's not correct usage, but it appears after the following patch, so add it as a fix. Fixes: 74a992b3 ("net: phy: add phy_check_link_status") Signed-off-by:
Ivan Khoronzhuk <ikhoronz@cisco.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Wong Vee Khee authored
While unloading the dwmac-intel driver, clk_disable_unprepare() is being called twice in stmmac_dvr_remove() and intel_eth_pci_remove(). This causes kernel panic on the second call. Removing the second call of clk_disable_unprepare() in intel_eth_pci_remove(). Fixes: 09f012e6 ("stmmac: intel: Fix clock handling on error and remove paths") Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
Wong Vee Khee <vee.khee.wong@intel.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Ronak Doshi authored
Commit dacce2be ("vmxnet3: add geneve and vxlan tunnel offload support") added support for encapsulation offload. However, the inner offload capability is to be restrictued to UDP tunnels. This patch fixes the issue for non-udp tunnels by adding features check capability and filtering appropriate features for non-udp tunnels. Fixes: dacce2be ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by:
Ronak Doshi <doshir@vmware.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-09-25 This series contains updates to the iavf and ice driver. Sylwester fixes a crash with iavf resume due to getting the wrong pointers. Ani fixes a call trace in ice resume by calling pci_save_state(). Jakes fixes memory leaks in case of register_netdev() failure or ice_cfg_vsi_lan() failure for the ice driver. v2: Rebased; no other changes ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'wireless-drivers-2020-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.9 Second, and last, set of fixes for v5.9. Only one important regression fix for mt76. mt76 * fix a regression in aggregation which appeared after mac80211 changes ==================== Signed-off-by:
-
Jacob Keller authored
During ice_vsi_setup, if ice_cfg_vsi_lan fails, it does not properly release memory associated with the VSI rings. If we had used devres allocations for the rings, this would be ok. However, we use kzalloc and kfree_rcu for these ring structures. Using the correct label to cleanup the rings during ice_vsi_setup highlights an issue in the ice_vsi_clear_rings function: it can leave behind stale ring pointers in the q_vectors structure. When releasing rings, we must also ensure that no q_vector associated with the VSI will point to this ring again. To resolve this, loop over all q_vectors and release their ring mapping. Because we are about to free all rings, no q_vector should remain pointing to any of the rings in this VSI. Fixes: 5513b920 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
The ice_setup_pf_sw function can cause a memory leak if register_netdev fails, due to accidentally failing to free the VSI rings. Fix the memory leak by using ice_vsi_release, ensuring we actually go through the full teardown process. This should be safe even if the netdevice is not registered because we will have set the netdev pointer to NULL, ensuring ice_vsi_release won't call unregister_netdev. An alternative fix would be moving management of the PF VSI netdev into the main VSI setup code. This is complicated and likely requires significant refactor in how we manage VSIs Fixes: 3a858ba3 ("ice: Add support for VSI allocation and deallocation") Signed-off-by:
-
Anirudh Venkataramanan authored
It appears that the ice_suspend flow is missing a call to pci_save_state and this is triggering the message "State of device not saved by ice_suspend" and a call trace. Fix it. Fixes: 769c500d ("ice: Add advanced power mgmt for WoL") Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
-
Sylwester Dziedziuch authored
When calling iavf_resume there was a crash because wrong function was used to get iavf_adapter and net_device pointers. Changed how iavf_resume is getting iavf_adapter and net_device pointers from pci_dev. Fixes: 5eae00c5 ("i40evf: main driver core") Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Reviewed-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by:
-
Priyaranjan Jha authored
Currently, we use length of DSACKed range to compute number of delivered packets. And if sequence range in DSACK is corrupted, we can get bogus dsacked/acked count, and bogus cwnd. This patch put bounds on DSACKed range to skip update of data delivery and spurious retransmission information, if the DSACK is unlikely caused by sender's action: - DSACKed range shouldn't be greater than maximum advertised rwnd. - Total no. of DSACKed segments shouldn't be greater than total no. of retransmitted segs. Unlike spurious retransmits, network duplicates or corrupted DSACKs shouldn't be counted as delivery. Signed-off-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Jamie Iles authored
MDIO reads can happen during PHY probing, and printing an error with dev_err can result in a large number of error messages during device probe. On a platform with a serial console this can result in excessively long boot times in a way that looks like an infinite loop when multiple busses are present. Since 0f183fd1 (net/fsl: enable extended scanning in xgmac_mdio) we perform more scanning so there are potentially more failures. Reduce the logging level to dev_dbg which is consistent with the Freescale enetc driver. Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
Jamie Iles <jamie@nuviainc.com> Reviewed-by:
-
Helmut Grohne authored
The previous implementation failed to account for the "ports" node. The actual port nodes are not child nodes of the switch node, but a "ports" node sits in between. Fixes: edecfa98 ("net: dsa: microchip: look for phy-mode in port nodes") Signed-off-by:
Helmut Grohne <helmut.grohne@intenta.de> Signed-off-by:
-
Rohit Maheshwari authored
BUG: kernel NULL pointer dereference, address: 00000000000000b8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000008b6fef067 P4D 80000008b6fef067 PUD 8b6fe6067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 12 PID: 23871 Comm: kworker/12:80 Kdump: loaded Tainted: G S 5.9.0-rc3+ #1 Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.1 03/29/2018 Workqueue: events tx_work_handler [tls] RIP: 0010:tx_work_handler+0x1b/0x70 [tls] Code: dc fe ff ff e8 16 d4 a3 f6 66 0f 1f 44 00 00 0f 1f 44 00 00 55 53 48 8b 6f 58 48 8b bd a0 04 00 00 48 85 ff 74 1c 48 8b 47 28 <48> 8b 90 b8 00 00 00 83 e2 02 75 0c f0 48 0f ba b0 b8 00 00 00 00 RSP: 0018:ffffa44ace61fe88 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff91da9e45cc30 RCX: dead000000000122 RDX: 0000000000000001 RSI: ffff91da9e45cc38 RDI: ffff91d95efac200 RBP: ffff91da133fd780 R08: 0000000000000000 R09: 000073746e657665 R10: 8080808080808080 R11: 0000000000000000 R12: ffff91dad7d30700 R13: ffff91dab6561080 R14: 0ffff91dad7d3070 R15: ffff91da9e45cc38 FS: 0000000000000000(0000) GS:ffff91dad7d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b8 CR3: 0000000906478003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: process_one_work+0x1a7/0x370 worker_thread+0x30/0x370 ? process_one_work+0x370/0x370 kthread+0x114/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 tls_sw_release_resources_tx() waits for encrypt_pending, which can have race, so we need similar changes as in commit 0cada332 here as well. Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Wang Qing authored
Modify the comment typo: "compliment" -> "complement". Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Xiaoliang Yang authored
INIT_IPS and GATE_ENABLE fields have a wrong offset in SG_CONFIG_REG_3. This register is used by stream gate control of PSFP, and it has not been used before, because PSFP is not implemented in ocelot driver. Signed-off-by:
Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by:
-
Xiaoliang Yang authored
state->speed holds a value of 10, 100, 1000 or 2500, but QSYS_TAG_CONFIG_LINK_SPEED expects a value of 0, 1, 2, 3. So convert the speed to a proper value. Fixes: de143c0e ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Luo bin authored
It should also be regarded as an error when hw return status=4 for PF's setting mac cmd. Only if PF return status=4 to VF should this cmd be taken special treatment. Fixes: 7dd29ee1 ("hinic: add sriov feature support") Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Xie He authored
1. Move the lapb_register/lapb_unregister calls into the ndo_open/ndo_stop functions. This makes the LAPB protocol start/stop when the network interface starts/stops. When the network interface is down, the LAPB protocol shouldn't be running and the LAPB module shoudn't be generating control frames. 2. Move netif_start_queue/netif_stop_queue into the ndo_open/ndo_stop functions. This makes the TX queue start/stop when the network interface starts/stops. (netif_stop_queue was originally in the ndo_stop function. But to make the code look better, I created a new function to use as ndo_stop, and made it call the original ndo_stop function. I moved netif_stop_queue from the original ndo_stop function to the new ndo_stop function.) Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
Maciej Żenczykowski authored
Documentation/networking/ip-sysctl.txt:46 says: ip_forward_use_pmtu - BOOLEAN By default we don't trust protocol path MTUs while forwarding because they could be easily forged and can lead to unwanted fragmentation by the router. You only need to enable this if you have user-space software which tries to discover path mtus by itself and depends on the kernel honoring this information. This is normally not the case. Default: 0 (disabled) Possible values: 0 - disabled 1 - enabled Which makes it pretty clear that setting it to 1 is a potential security/safety/DoS issue, and yet it is entirely reasonable to want forwarded traffic to honour explicitly administrator configured route mtus (instead of defaulting to device mtu). Indeed, I can't think of a single reason why you wouldn't want to. Since you configured a route mtu you probably know better... It is pretty common to have a higher device mtu to allow receiving large (jumbo) frames, while having some routes via that interface (potentially including the default route to the internet) specify a lower mtu. Note that ipv6 forwarding uses device mtu unless the route is locked (in which case it will use the route mtu). This approach is not usable for IPv4 where an 'mtu lock' on a route also has the side effect of disabling TCP path mtu discovery via disabling the IPv4 DF (don't frag) bit on all outgoing frames. I'm not aware of a way to lock a route from an IPv6 RA, so that also potentially seems wrong. Signed-off-by:Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Sunmeet Gill (Sunny) <sgill@quicinc.com> Cc: Vinay Paradkar <vparadka@qti.qualcomm.com> Cc: Tyler Wear <twear@quicinc.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by:
-
David S. Miller authored
Cong Wang says: ==================== net_sched: fix a UAF in tcf_action_init() This patchset fixes a use-after-free triggered by syzbot. Please find more details in each patch description. ==================== Signed-off-by: -
Cong Wang authored
syzbot is able to trigger a failure case inside the loop in tcf_action_init(), and when this happens we clean up with tcf_action_destroy(). But, as these actions are already inserted into the global IDR, other parallel process could free them before tcf_action_destroy(), then we will trigger a use-after-free. Fix this by deferring the insertions even later, after the loop, and committing all the insertions in a separate loop, so we will never fail in the middle of the insertions any more. One side effect is that the window between alloction and final insertion becomes larger, now it is more likely that the loop in tcf_del_walker() sees the placeholder -EBUSY pointer. So we have to check for error pointer in tcf_del_walker(). Reported-and-tested-by: syzbot+2287853d392e4b42374a@syzkaller.appspotmail.com Fixes: 0190c1d4 ("net: sched: atomically check-allocate action") Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cong Wang authored
All TC actions call tcf_idr_insert() for new action at the end of their ->init(), so we can actually move it to a central place in tcf_action_init_1(). And once the action is inserted into the global IDR, other parallel process could free it immediately as its refcnt is still 1, so we can not fail after this, we need to move it after the goto action validation to avoid handling the failure case after insertion. This is found during code review, is not directly triggered by syzbot. And this prepares for the next patch. Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
- 24 Sep, 2020 6 commits
-
-
Felix Fietkau authored
After fixing mac80211 to allow larger A-MSDUs in some cases, there have been reports of performance regressions and packet loss with some clients. It appears that the issue occurs when the hardware is transmitting A-MSDUs bigger than 8k. Limit the local VHT MPDU size capability to 7991, matching the value used for MT7915 as well. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200923052442.24141-1-nbd@nbd.name
-
Voon Weifeng authored
EEE should be only be enabled during stmmac_mac_link_up() when the link are up and being set up properly. set_eee should only do settings configuration and disabling the eee. Without this fix, turning on EEE using ethtool will return "Operation not supported". This is due to the driver is in a dead loop waiting for eee to be advertised in the for eee to be activated but the driver will only configure the EEE advertisement after the eee is activated. Ethtool should only return "Operation not supported" if there is no EEE capbility in the MAC controller. Fixes: 8a7493e5 ("net: stmmac: Fix a race in EEE enable callback") Signed-off-by:
Mark Gross <mgross@linux.intel.com> Signed-off-by:
-
Hauke Mehrtens authored
The TX DMA channel data is accessed by the xrx200_start_xmit() and the xrx200_tx_housekeeping() function from different threads. Make sure the accesses are synchronized by acquiring the netif_tx_lock() in the xrx200_tx_housekeeping() function too. This lock is acquired by the kernel before calling xrx200_start_xmit(). Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Tian Tao authored
Update kernel-doc line comments to fix warnings reported by make W=1. net/switchdev/switchdev.c:413: warning: Function parameter or member 'extack' not described in 'call_switchdev_notifiers' Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 1838d6c6. This commit moved the ravb_mdio_init() call (and thus the of_mdiobus_register() call) from the ravb_probe() to the ravb_open() call. This causes a regression during system resume (s2idle/s2ram), as new PHY devices cannot be bound while suspended. During boot, the Micrel PHY is detected like this: Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=228) ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off During system suspend, (A) defer_all_probes is set to true, and (B) usermodehelper_disabled is set to UMH_DISABLED, to avoid drivers being probed while suspended. A. If CONFIG_MODULES=n, phy_device_register() calling device_add() merely adds the device, but does not probe it yet, as really_probe() returns early due to defer_all_probes being set: dpm_resume+0x128/0x4f8 device_resume+0xcc/0x1b0 dpm_run_callback+0x74/0x340 ravb_resume+0x190/0x1b8 ravb_open+0x84/0x770 of_mdiobus_register+0x1e0/0x468 of_mdiobus_register_phy+0x1b8/0x250 of_mdiobus_phy_device_register+0x178/0x1e8 phy_device_register+0x114/0x1b8 device_add+0x3d4/0x798 bus_probe_device+0x98/0xa0 device_initial_probe+0x10/0x18 __device_attach+0xe4/0x140 bus_for_each_drv+0x64/0xc8 __device_attach_driver+0xb8/0xe0 driver_probe_device.part.11+0xc4/0xd8 really_probe+0x32c/0x3b8 Later, phy_attach_direct() notices no PHY driver has been bound, and falls back to the Generic PHY, leading to degraded operation: Generic PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=POLL) ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off B. If CONFIG_MODULES=y, request_module() returns early with -EBUSY due to UMH_DISABLED, and MDIO initialization fails completely: mdio_bus e6800000.ethernet-ffffffff:00: error -16 loading PHY driver module for ID 0x00221622 ravb e6800000.ethernet eth0: failed to initialize MDIO PM: dpm_run_callback(): ravb_resume+0x0/0x1b8 returns -16 PM: Device e6800000.ethernet failed to resume: error -16 Ignoring -EBUSY in phy_request_driver_module(), like was done for -ENOENT in commit 21e19442 ("net: phy: fix issue with loading PHY driver w/o initramfs"), would makes it fall back to the Generic PHY, like in the CONFIG_MODULES=n case. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
Mat Martineau authored
When receiving a DATA_FIN MPTCP option on a TCP FIN packet, the DATA_FIN information would be stored but the MPTCP worker did not get scheduled. In turn, the MPTCP socket state would remain in TCP_ESTABLISHED and no blocked operations would be awakened. TCP FIN packets are seen by the MPTCP socket when moving skbs out of the subflow receive queues, so schedule the MPTCP worker when a skb with DATA_FIN but no data payload is moved from a subflow queue. Other cases (DATA_FIN on a bare TCP ACK or on a packet with data payload) are already handled. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/84 Fixes: 43b54c6e ("mptcp: Use full MPTCP-level disconnect state machine") Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
- 22 Sep, 2020 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "No common topic, just assorted fixes" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse: fix the ->direct_IO() treatment of iov_iter fs: fix cast in fsparam_u32hex() macro vboxsf: Fix the check for the old binary mount-arguments struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: - fix failure to add bond interfaces to a bridge, the offload-handling code was too defensive there and recent refactoring unearthed that. Users complained (Ido) - fix unnecessarily reflecting ECN bits within TOS values / QoS marking in TCP ACK and reset packets (Wei) - fix a deadlock with bpf iterator. Hopefully we're in the clear on this front now... (Yonghong) - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel) - fix AQL on mt76 devices with FW rate control and add a couple of AQL issues in mac80211 code (Felix) - fix authentication issue with mwifiex (Maximilian) - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro) - fix exception handling for multipath routes via same device (David Ahern) - revert back to a BH spin lock flavor for nsid_lock: there are paths which do require the BH context protection (Taehee) - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke) - fix ife module load deadlock (Cong) - make an adjustment to netlink reply message type for code added in this release (the sole change touching uAPI here) (Michal) - a number of fixes for small NXP and Microchip switches (Vladimir) [ Pull request acked by David: "you can expect more of this in the future as I try to delegate more things to Jakub" ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits) net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU net: Update MAINTAINERS for MediaTek switch driver net/mlx5e: mlx5e_fec_in_caps() returns a boolean net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock net/mlx5e: kTLS, Fix leak on resync error flow net/mlx5e: kTLS, Add missing dma_unmap in RX resync net/mlx5e: kTLS, Fix napi sync and possible use-after-free net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats() net/mlx5e: Fix multicast counter not up-to-date in "ip -s" net/mlx5e: Fix endianness when calculating pedit mask first bit net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported net/mlx5e: CT: Fix freeing ct_label mapping net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready net/mlx5e: Use synchronize_rcu to sync with NAPI net/mlx5e: Use RCU to protect rq->xdp_prog ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few fixes - most of them regression fixes from this cycle, but also a few stable heading fixes, and a build fix for the included demo tool since some systems now actually have gettid() available" * tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block: io_uring: fix openat/openat2 unified prep handling io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL tools/io_uring: fix compile breakage io_uring: don't use retry based buffered reads for non-async bdev io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there io_uring: don't run task work on an exiting task io_uring: drop 'ctx' ref on task work cancelation io_uring: grab any needed state during defer prep
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few NVMe fixes, and a dasd write zero fix" * tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block: nvmet: get transport reference for passthru ctrl nvme-core: get/put ctrl and transport module in nvme_dev_open/release() nvme-tcp: fix kconfig dependency warning when !CRYPTO nvme-pci: disable the write zeros command for Intel 600P/P3100 s390/dasd: Fix zero write for FBA devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Check kprobe is enabled before unregistering from ftrace as it isn't registered when disabled. - Remove kprobes enabled via command-line that is on init text when freed. - Add missing RCU synchronization for ftrace trampoline symbols removed from kallsyms. - Free trampoline on error path if ftrace_startup() fails. - Give more space for the longer PID numbers in trace output. - Fix a possible double free in the histogram code. - A couple of fixes that were discovered by sparse. * tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: init: make xbc_namebuf static kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot tracing: fix double free ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer tracing: Make the space reserved for the pid wider ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms ftrace: Free the trampoline when ftrace_startup() fails kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
-
David S. Miller authored
Vladimir Oltean says: ==================== Fix broken tc-flower rules for mscc_ocelot switches All 3 switch drivers from the Ocelot family have the same bug in the VCAP IS2 key offsets, which is that some keys are in the incorrect order. ==================== Signed-off-by: -
Vladimir Oltean authored
The IS2 IP4_TCP_UDP key offsets do not correspond to the VSC7514 datasheet. Whether they work or not is unknown to me. On VSC9959 and VSC9953, with the same mistake and same discrepancy from the documentation, tc-flower src_port and dst_port rules did not work, so I am assuming the same is true here. Signed-off-by:
-
Vladimir Oltean authored
Since these were copied from the Felix VCAP IS2 code, and only the offsets were adjusted, the order of the bit fields is still wrong. Fix it. Signed-off-by:
-
Xiaoliang Yang authored
Some of the IS2 IP4_TCP_UDP keys are not correct, like L4_DPORT, L4_SPORT and other L4 keys. This prevents offloaded tc-flower rules from matching on src_port and dst_port for TCP and UDP packets. Signed-off-by:
-
