- 15 Aug, 2017 13 commits
-
-
Jim Bride authored
Some fixed resolution panels actually support more than one mode, with the only thing different being the refresh rate. Having this alternate mode available to us is desirable, because it allows us to test PSR on panels whose setup time at the preferred mode is too long. With this patch we allow the use of the alternate mode if it's available and it was specifically requested. v2 and v3: Rebase v4: * Fix up some leaky mode stuff (Chris) * Rebase v5: * Fix a NULL pointer derefrence (David Weinehall) v6: * Whitespace / spelling / checkpatch clean-up; no functional change. (David) * Rebase Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502308133-26892-1-git-send-email-jim.bride@linux.intel.com
-
Jason Ekstrand authored
This commit adds support for waiting on or signaling DRM syncobjs as part of execbuf. It does so by hijacking the currently unused cliprects pointer to instead point to an array of i915_gem_exec_fence structs which containe a DRM syncobj and a flags parameter which specifies whether to wait on it or to signal it. This implementation theoretically allows for both flags to be set in which case it waits on the dma_fence that was in the syncobj and then immediately replaces it with the dma_fence from the current execbuf. v2: - Rebase on new syncobj API v3: - Pull everything out into helpers - Do all allocation in gem_execbuffer2 - Pack the flags in the bottom 2 bits of the drm_syncobj* v4: - Prevent a potential race on syncobj->fence Testcase: igt/gem_exec_fence/syncobj* Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/1499289202-25441-1-git-send-email-jason.ekstrand@intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170815145733.4562-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The wait-ioctl is optionally supplied a timeout with nanosecond precision in a s64 field. We use nsecs_to_jiffies64() to convert that into the jiffies consumed by the scheduler, but internally nsecs_to_jiffies64() does not guard against overflow (as it's purpose is for use by the scheduler and not drivers!). So we must guard against the overflow ourselves, and in the process note that we may then return much earlier than the timeout selected by the user, so don't report ETIME unless we do hit the timeout. (Woe betold us though if the user waits for a year (32bit) and the request is still not complete!) v2: Refine overflow detection (to not include an overffow itself) Reported-by: Jason Ekstrand <jason.ekstrand@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170811105731.9482-1-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Another month, another story in the cache coherency saga. This time, we come to the realisation that i915_gem_object_is_coherent() has been reporting whether we can read from the target without requiring a cache invalidate; but we were using it in places for testing whether we could write into the object without requiring a cache flush. So split the tracking into two, one to decide before reads, one after writes. See commit e27ab73d ("drm/i915: Mark CPU cache as dirty on every transition for CPU writes") for the previous entry in this saga. v2: Be verbose v3: Remove unused function (i915_gem_object_is_coherent) v4: Fix inverted coherency check prior to execbuf (from v2) v5: Add comment for nasty code where we are optimising on gcc's behalf. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101109 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101555 Testcase: igt/kms_mmap_write_crc Testcase: igt/kms_pwrite_crc Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811111116.10373-1-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Imre Deak authored
Future platforms increase the number of power wells which require additional control registers. A convenient way to select the correct register is to use the high bits of the power well ID as index. This patch only prepares for this, while upcoming platform enabling patches will add the actual new power well IDs and corresponding power well control registers. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rakshmi Bhatia <rakshmi.bhatia@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Rakshmi Bhatia <rakshmi.bhatia@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170814151530.24154-2-imre.deak@intel.com
-
Imre Deak authored
GCC 4.4 can't cope with anonymous union initializers which seems to be a bug in that version (see the Reference) and is fixed since GCC version 4.6. A workaround which is also used elsewhere in the kernel for the same purpose is to wrap the initialization in curly braces, so do the same here. Fixes: b5565a2e ("drm/i915/bxt, glk: Give a proper name to the power well struct phy field") Reference: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170814151530.24154-1-imre.deak@intel.com
-
https://github.com/01org/gvt-linuxDaniel Vetter authored
gvt-next-2017-08-15 gvt update for 4.14 - MMIO save/restore optimization (Changbin) - Split workload scan vs. dispatch for more parallel exec (Ping) - vGPU full 48bit ppgtt support (Joonas, Tina) - vGPU hw id expose for perf (Zhenyu) - other misc cleanup and fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170815023940.skhjfcsyrao7axqi@zhen-hp.sh.intel.com
-
Balasubramaniam, Hari Chand authored
variable 'data' may be used uninitialized in this function. thus, 'function dcs_get_backlight' will return unwanted value/fail. Thus, adding NULL initialized to 'data' variable will solve the return failure happening. v2: Change commit message to reflect upstream with proper message Fixes: 90198355 ("drm/i915/dsi: Add DCS control for Panel PWM") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Cc: Deepak M <m.deepak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Balasubramaniam, Hari Chand <hari.chand.balasubramaniam@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502762746-191826-1-git-send-email-hari.chand.balasubramaniam@intel.com
-
Manasi Navare authored
Validate the compliance test link parameters when the compliance test dpcd registers are read. Also validate them in compute_config before using them since the max values might have been reduced due to link training fallback. If either the link rate or lane count is invalid, we still bail from using the test parameters since the combination would not work and instead use the fallback values. v2: * Added commit message to explain why we still bail when either of of the params is invalid (Ville Syrjala) * Add reason for validating in the comment (Jani Nikula) * Also check if index >= 0 after validating (Jani Nikula) Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1496954463-18038-2-git-send-email-manasi.d.navare@intel.com
-
Manasi Navare authored
This function now takes the link rate and lane ocunt to be validated as an argument so that this can be used for validating even the compliance test link parameters. Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1496954463-18038-1-git-send-email-manasi.d.navare@intel.com
-
Tina Zhang authored
Guest i915 full ppgtt functionality was blocking by an issue, which would lead to gpu hardware hang. Guest i915 driver may update the ppgtt table just before this workload is going to be submitted to the hardware by device model. This case wasn't handled well by device model before, due to the small time window between removing old ppgtt entry and adding the new one. Errors occur when the workload is executed by hardware during that small time window. This patch is to remove this time window by adding the new ppgtt entry first and then remove the old one. Changes in v2: - Move VGT_CAPS_FULL_PPGTT introduction to patch 2/4. (Joonas) Changes since v2: - Divide the whole patch set into two separate patch series, with one patch in i915 side to check guest i915 full ppgtt capability and enable it when this capability is supported by the device model, and the other one in gvt side which fixs the blocking issue and enables the device model to provide the capability to guest. And this patch focuses on gvt side. (Joonas) - Change the title from "reorder the shadow ppgtt update process by adding entry first" to "Fix guest i915 full ppgtt blocking issue". (Tina) Changes since v3: - Rebase to the latest branch. Changes since v4: - Tested by Tina Zhang. Changes since v5: - Rebase to the latest branch. v6: - Update full 48bit ppgtt definition Cc: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
-
Tina Zhang authored
Enable the guest i915 full ppgtt functionality when host can provide this capability. vgt_caps is introduced to guest i915 driver to get the vgpu capabilities from the device model. VGT_CPAS_FULL_PPGTT is one of the capabilities type to let guest i915 dirver know that the guest i915 full ppgtt is supported by device model. Notice that the minor version of pvinfo isn't bumped because of this vgt_caps introduction, due to older guest would be broken by simply increasing the pvinfo version. Although the pvinfo minor version doesn't increase, the compatibility won't be blocked. The compatibility is ensured by checking the value of caps field in pvinfo. Zero means no full ppgtt support and BIT(2) means this feature is provided. Changes since v1: - Use u32 instead of uint32_t (Joonas) - Move VGT_CAPS_FULL_PPGTT introduction to this patch and use #define instead of enum (Joonas) - Rewrite the vgpu full ppgtt capability checking logic. (Joonas) - Some coding style refine. (Joonas) Changes since v2: - Divide the whole patch set into two separate patch series, with one patch in i915 side to check guest i915 full ppgtt capability and enable it when this capability is supported by the device model, and the other one in gvt side which fixs the blocking issue and enables the device model to provide the capability to guest. And this patch focuses on guest i915 side. (Joonas) - Change the title from "introduce vgt_caps to pvinfo" to "Enable guest i915 full ppgtt functionality". (Tina) Change since v3: - Add some comments about pvinfo caps and version. (Joonas) Change since v4: - Tested by Tina Zhang. Change since v5: - Add limitation about supporting 32bit full ppgtt. Change since v6: - Change the fallback to 48bit full ppgtt if i915.ppgtt_enable=2. (Zhenyu) Change in v9: - Remove the fixme comment due to no plan for 32bit full ppgtt support. (Zhenyu) - Reorder the patch-set to fix compiling issue with git-bisect. (Zhenyu) - Add print log when forcing guest 48bit full ppgtt. (Zhenyu) v10: - Update against Joonas's has_full_ppgtt and has_full_48bit_ppgtt disconnect change. (Zhenyu) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> # in v2 Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
-
Joonas Lahtinen authored
Configurations like virtualized environments may support only 48 bit ppGTT without supporting 32 bit ppGTT. Support this by disconnecting the relationship of the two feature bits. Cc: Tina Zhang <tina.zhang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 14 Aug, 2017 4 commits
-
-
Daniel Vetter authored
There's no reason to entirely wedge the gpu, for the minimal deadlock bugfix we only need to unbreak/decouple the atomic commit from the gpu reset. The simplest way to fix that is by replacing the unconditional fence wait a the top of commit_tail by a wait which completes either when the fences are done (normal case, or when a reset doesn't need to touch the display state). Or when the gpu reset needs to force-unblock all pending modeset states. The lesser source of deadlocks is when we try to pin a new framebuffer and run into a stall. There's a bunch of places this can happen, like eviction, changing the caching mode, acquiring a fence on older platforms. And we can't just break the depency loop and keep going, the only way would be to break out and restart. But the problem with that approach is that we must stall for the reset to complete before we grab any locks, and with the atomic infrastructure that's a bit tricky. The only place is the ioctl code, and we don't want to insert code into e.g. the BUSY ioctl. Hence for that problem just create a critical section, and if any code is in there, wedge the GPU. For the steady-state this should never be a problem. Note that in both cases TDR itself keeps working, so from a userspace pov this trickery isn't observable. Users themselvs might spot a short glitch while the rendering is catching up again, but that's still better than pre-TDR where we've thrown away all the rendering, including innocent batches. Also, this fixes the regression TDR introduced of making gpu resets deadlock-prone when we do need to touch the display. One thing I noticed is that gpu_error.flags seems to use both our own wait-queue in gpu_error.wait_queue, and the generic wait_on_bit facilities. Not entirely sure why this inconsistency exists, I just picked one style. A possible future avenue could be to insert the gpu reset in-between ongoing modeset changes, which would avoid the momentary glitch. But that's a lot more work to implement in the atomic commit machinery, and given that we only need this for pre-g4x hw, of questionable utility just for the sake of polishing gpu reset even more on those old boxes. It might be useful for other features though. v2: Rebase onto 4.13 with a s/wait_queue_t/struct wait_queue_entry/. v3: Really emabarrassing fixup, I checked the wrong bit and broke the unbreak/wakeup logic. v4: Also handle deadlocks in pin_to_display. v5: Review from Michel: - Fixup the BUILD_BUG_ON - Don't forget about the overlay Cc: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Cc: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-3-daniel.vetter@ffwll.chReviewed-by: Michel Thierry <michel.thierry@intel.com>
-
Daniel Vetter authored
Blocking in a worker is ok, that's what the unbound_wq is for. And it unifies the paths between the blocking and nonblocking commit, giving me just one path where I have to implement the deadlock avoidance trickery in the next patch. I first tried to implement the following patch without this rework, but force-completing i915_sw_fence creates some serious challenges around properly cleaning things up. So wasn't a feasible short-term approach. Another approach would be to simple keep track of all pending atomic commit work items and manually queue them from the reset code. With the caveat that double-queue in case we race with the i915_sw_fence must be avoided. Given all that, taking the cost of a double schedule in atomic for the short-term fix is the best approach, but can be changed in the future of course. v2: Amend commit message (Chris). v3: Add comment explaining why we do nothing in the sw_fence complete callback (Michel). Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-2-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
... using the biggest hammer we have. This is essentially a weaponized version of the timeout-based wedging Chris added in commit 36703e79 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Jun 22 11:56:25 2017 +0100 drm/i915: Break modeset deadlocks on reset Because defense-in-depth is good it's good to still have both. Also note that with the locking change we can now restrict this a lot (old gpus and special testing only), so this doesn't kill the TDR benefits on at least anything remotely modern. And futuremore with a few tricks it should be possible to make a much more educated guess about whether an atomic commit is stuck waiting on the gpu (atomic_t counting the pending i915_sw_fence used by the atomic modeset code should do it), so we can improve this. But for now just start with something that is guaranteed to recover faster, for much better CI througput. This defacto reverts TDR on these platforms, but there's not really a single commit to specify as the sole offender. v2: Add a debug message to explain what's going on. We can't DRM_ERROR because that spams CI. And the timeout based fallback still prints a DRM_ERROR, in case something goes wrong. v3: Fix comment layout (Michel) Fixes: 4680816b ("drm/i915: Wait first for submission, before waiting for request completion") Fixes: 221fe799 ("drm/i915: Perform a direct reset of the GPU from the waiter") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-1-daniel.vetter@ffwll.ch
-
Mika Kuoppala authored
Update gen9 renderstate to account the, long overdue, changes for igt commit 5c07135b7bd2 ("tools/null_state/gen9: Send all components in VF state"). Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170810110451.31635-1-mika.kuoppala@intel.com
-
- 12 Aug, 2017 3 commits
-
-
Michal Wajdeczko authored
We should emphasize that irq raising function depends on Gen. v2: use yet another better name (Chris) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170809212603.28780-1-michal.wajdeczko@intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
When switching between contexts using the aliasing_ppgtt, the VM is shared. We don't need to reload the PD registers unless they are dirty. Martin Peres reported an issue that looks like corruption between Haswell context switches, bisecting to commit f9326be5 ("drm/i915: Rearrange switch_context to load the aliasing ppgtt on first use"). Switching between the same mm (the aliasing_ppgtt is used for all contexts in this case) should be a nop, but appears to trigger some side-effects in the context switch. However, as we know the switch is redundant in this case, we can skip it and continue to ignore the issue until somebody feels strong enough to investigate full-ppgtt on gen7 again! Except.. Martin was using full-ppgtt which is not supported as it doesn't work correctly yet. So whilst the bisect did yield valuable information about the failures, the fix should not have any user impact under default settings, with the exception of a slightly lower throughput on xcs as the VM would always be reloaded. v2: Also remember to set the legacy_active_context following the switch on xcs (commit e8a9c58f ("drm/i915: Unify active context tracking between legacy/execlists/guc")) Fixes: f9326be5 ("drm/i915: Rearrange switch_context to load the aliasing ppgtt on first use") Fixes: e8a9c58f ("drm/i915: Unify active context tracking between legacy/execlists/guc") Reported-by: Martin Peres <martin.peres@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170812152724.6883-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since we do use the SW_SYNC in igt for validating dma-fence and sync_file, and wish to expand usage to cover driver independent portions of syncobj interaction, ensure SW_SYNC is included in our testing Kconfig. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jason Ekstrand <jason.ekstrand@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170810094036.4307-1-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 11 Aug, 2017 7 commits
-
-
Rodrigo Vivi authored
The idea is to have an unique place to decide the pin-port per platform. So let's create this function now without any functional change. Just adding together code from hdmi and dp together. v2: Add missing pin for port A. v3: Fix typo on subject. Avoid behaviour change so add WARN_ON and return if port A on HDMI. (by DK). Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811182650.14327-2-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
We will soon need to make that pin port association per platform, so let's try to simplify it beforehand. Also we are moving the backwards port to pin here as well so let's use a standardized way. One extra possibility here would be to add a MISSING_CASE along with PORT_NONE, but I don't want to change this behaviour for now. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811182650.14327-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Different from SKL we don't need ctrl1 and cfgcr2, but we need to dump cfgcr0 and cfgcr1 instead. v2: rebase and commit message Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170810224525.18278-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
"Frequencies over 5.4 GHz only supported on certain DDI ports and SKUs, and requires Vccio >= 0.95V." More specifically, for current CNL SKUs available (CNL-U and CNL-Y) we have: DDI A - 5.4G eDP DDI B - 8.1G DP DDI C - 8.1G DP DDI D - 5.4G DP v2: Rebase on top of source_rates changes. v3: Address the max 5.4 x 8.1 per DDI and also consider vccio. Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170810224008.15571-1-rodrigo.vivi@intel.com
-
Matthias Kaehlcke authored
For 0.85V cnl_get_buf_trans_edp() returns the DP table, instead of EDP. Use the correct table. The error was pointed out by this clang warning: drivers/gpu/drm/i915/intel_ddi.c:392:39: warning: variable 'cnl_ddi_translations_edp_0_85V' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = { Fixes: cf54ca8b ("drm/i915/cnl: Implement voltage swing sequence.") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170717195854.192139-1-mka@chromium.org
-
Colin Ian King authored
The structure intel_sprite_plane_funcs is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'intel_sprite_plane_funcs' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170811134938.4183-1-colin.king@canonical.com
-
Daniel Vetter authored
In our snb farm in CI we have plenty of underruns, but not enough stolen memory to enable fbc. Which means every time there's an underrun the no_fbc_reason swichtes to something that makes kms_frontbuffer_tracking fail instead of skip, adding massive amounts of additional noise to igt test runs. Make sure we don't try to disable fbc when it's off already. v2: Squash in additional WARN_ON suggestion from Chris. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811072327.4335-1-daniel.vetter@ffwll.ch
-
- 10 Aug, 2017 13 commits
-
-
Rodrigo Vivi authored
A missing part to EU slice power gating is the debugfs interface. This patch actually should have been squashed to the initial EU slice power gating one. v2: Initial patch was merged without this part. Fixes: c7ae7e9a ("drm/i915/cnl: Configure EU slice power gating.") Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170809200702.11236-1-rodrigo.vivi@intel.com
-
Paulo Zanoni authored
Gen 10 is just like Gen 9, so let's consider that all the future platforms are going to be like gen 9 instead of being like gen8-. Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-4-rodrigo.vivi@intel.com
-
Paulo Zanoni authored
A previous commit added CNL to intel_has_sagv(), but forgot to adjust the SAGV block time to gen 10 platforms. Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-3-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
For now inherit from previous platforms. v2: Rebase on top of CFL. Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-2-rodrigo.vivi@intel.com
-
Paulo Zanoni authored
Gen 10 should use the exact same code as Gen 9, so change the check to take this into consideration, and also assume that future platforms will run this code. Also add a MISSING_CASE(), just in case we do something wrong, instead of silently failing. Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
I'm not sure if this is really the case and I don't believe this is the real fix for the bug mentioned here, but since I don't see a reliable path when mst_port is set and when mode_valid is requested I believe it is worth to have this protection here. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102022 Cc: Elizabeth <elizabethx.de.la.torre.mena@intel.com> Cc: Stefan Assmann <sassmann@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170810145043.24047-1-rodrigo.vivi@intel.com
-
Chris Wilson authored
As we cannot have an exclusive stream set if the perf has not been initialized, we only need to check for that exclusive stream. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-3-chris@chris-wilson.co.ukReviewed-by: Matthew Auld <matthew.auld@intel.com>
-
Chris Wilson authored
This is called from execlist context init which we need to be unlocked. Commit f89823c2 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface") added a lockdep assert to this path for unclear reasons, remove it again! Fixes: f89823c2 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-2-chris@chris-wilson.co.ukReviewed-by: Matthew Auld <matthew.auld@intel.com>
-
Chris Wilson authored
Another case where we need to call sysfs_attr_init() to setup the internal lockdep class prior to use: [ 9.325229] BUG: key ffff880168bc7bb0 not in .data! [ 9.325240] DEBUG_LOCKS_WARN_ON(1) [ 9.325250] ------------[ cut here ]------------ [ 9.325280] WARNING: CPU: 1 PID: 275 at kernel/locking/lockdep.c:3156 lockdep_init_map+0x1b2/0x1c0 [ 9.325301] Modules linked in: intel_powerclamp(+) coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915(+) snd_hda_intel snd_hda_codec snd_hwdep r8169 mii snd_hda_core snd_pcm prime_numbers i2c_hid pinctrl_geminilake pinctrl_intel [ 9.325375] CPU: 1 PID: 275 Comm: modprobe Not tainted 4.13.0-rc4-CI-Trybot_1040+ #1 [ 9.325395] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0045.B51.1704281422 04/28/2017 [ 9.325422] task: ffff8801721a4ec0 task.stack: ffffc900001dc000 [ 9.325440] RIP: 0010:lockdep_init_map+0x1b2/0x1c0 [ 9.325456] RSP: 0018:ffffc900001dfa10 EFLAGS: 00010282 [ 9.325473] RAX: 0000000000000016 RBX: ffff880168d54b80 RCX: 0000000000000000 [ 9.325488] RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0800 [ 9.325505] RBP: ffffc900001dfa30 R08: 0000000000000001 R09: 0000000000000000 [ 9.325521] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880168bc7bb0 [ 9.325537] R13: 0000000000000000 R14: ffff880168bc7b98 R15: ffffffff81a263a0 [ 9.325554] FS: 00007fb60c3fd700(0000) GS:ffff88017fc80000(0000) knlGS:0000000000000000 [ 9.325574] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.325588] CR2: 0000006582777d80 CR3: 000000016d818000 CR4: 00000000003406e0 [ 9.325604] Call Trace: [ 9.325618] __kernfs_create_file+0x76/0xe0 [ 9.325632] sysfs_add_file_mode_ns+0x8a/0x1a0 [ 9.325646] internal_create_group+0xea/0x2c0 [ 9.325660] sysfs_create_group+0x13/0x20 [ 9.325737] i915_perf_register+0xde/0x220 [i915] [ 9.325800] i915_driver_load+0xa77/0x16c0 [i915] [ 9.325863] i915_pci_probe+0x37/0x90 [i915] [ 9.325880] pci_device_probe+0xa8/0x130 [ 9.325894] driver_probe_device+0x29c/0x450 [ 9.325908] __driver_attach+0xe3/0xf0 [ 9.325922] ? driver_probe_device+0x450/0x450 [ 9.325935] bus_for_each_dev+0x62/0xa0 [ 9.325948] driver_attach+0x1e/0x20 [ 9.325960] bus_add_driver+0x173/0x270 [ 9.325974] driver_register+0x60/0xe0 [ 9.325986] __pci_register_driver+0x60/0x70 [ 9.326044] i915_init+0x6f/0x78 [i915] [ 9.326066] ? 0xffffffffa024e000 [ 9.326079] do_one_initcall+0x43/0x170 [ 9.326094] ? rcu_read_lock_sched_held+0x7a/0x90 [ 9.326109] ? kmem_cache_alloc_trace+0x261/0x2d0 [ 9.326124] do_init_module+0x5f/0x206 [ 9.326137] load_module+0x2561/0x2da0 [ 9.326150] ? show_coresize+0x30/0x30 [ 9.326165] ? kernel_read_file+0x105/0x190 [ 9.326180] SyS_finit_module+0xc1/0x100 [ 9.326192] ? SyS_finit_module+0xc1/0x100 [ 9.326210] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 9.326223] RIP: 0033:0x7fb60bf359f9 [ 9.326234] RSP: 002b:00007fff92b47c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 9.326255] RAX: ffffffffffffffda RBX: ffffffff814898a3 RCX: 00007fb60bf359f9 [ 9.326271] RDX: 0000000000000000 RSI: 00000028a9ceef8b RDI: 0000000000000000 [ 9.326287] RBP: ffffc900001dff88 R08: 0000000000000000 R09: 0000000000000000 [ 9.326303] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000040000 [ 9.326319] R13: 00000028aaef2a70 R14: 0000000000000000 R15: 00000028aaeee5d0 [ 9.326339] ? __this_cpu_preempt_check+0x13/0x20 [ 9.326353] Code: f1 39 00 85 c0 0f 84 38 ff ff ff 83 3d 9f 44 ce 01 00 0f 85 2b ff ff ff 48 c7 c6 b2 a2 c7 81 48 c7 c7 53 40 c5 81 e8 3f 82 01 00 <0f> ff e9 11 ff ff ff 0f 1f 80 00 00 00 00 55 31 c9 31 d2 31 f6 Fixes: 701f8231 ("drm/i915/perf: prune OA configs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-1-chris@chris-wilson.co.ukReviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
-
Jani Nikula authored
This is not to try to force a new style; this is my interpretation of what the most common existing style is. With hopes I don't need to answer so many questions about style going forward. Start a new style section in the i915 document to bolt the register style guide into. v2: vertical alignment, incorporate to kernel-doc, and more Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9de4a5b1bea4e76461c70a1dd66751581de0124f.1502368010.git.jani.nikula@intel.com
-
Jani Nikula authored
Revert to a normal comment, as the enum isn't properly documented anyway. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f2c44a0aa00ea7d9b71e7a3183a7507f98811146.1502368010.git.jani.nikula@intel.com
-
Jani Nikula authored
Remove old warning about docproc directive that's not supported in the Sphinx toolchain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7fc8a110b78a9dc9a585dce643b68b4200b7e793.1502368010.git.jani.nikula@intel.com
-
Ben Widawsky authored
This was based on a patch originally by Kristian. It has been modified pretty heavily to use the new callbacks from the previous patch. v2: - Add LINEAR and Yf modifiers to list (Ville) - Combine i8xx and i965 into one list of formats (Ville) - Allow 1010102 formats for Y/Yf tiled (Ville) v3: - Handle cursor formats (Ville) - Put handling for LINEAR in the mod_support functions (Ville) v4: - List each modifier explicitly in supported modifiers (Ville) - Handle the CURSOR plane (Ville) v5: - Split out cursor and sprite handling (Ville) v6: - Actually use the sprite funcs (Emil) - Use unreachable (Emil) v7: - Only allow Intel modifiers and LINEAR (Ben) v8 - Fix spite assert introduced in v6 (Daniel) v9 - Change vendor check logic to avoid magic 56 (Emil) - Reorder skl_mod_support (Ville) - make intel_plane_funcs static, could be done as of v5 (Ville) - rename local variable intel_format_modifiers to modifiers (Ville) - actually use sprite modifiers - split out modifier/formats by platform (Ville) v10: - Undo vendor check from v9 v11: - Squash CCS advertisement into this patch (daniels) - Don't advertise CCS on higher sprite planes (daniels) v12: - Don't advertise Y-tiled or CCS on any sprite planes, since we don't allocate enough DDB space for it to work. (daniels) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v8) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Stone <daniels@collabora.com>
-