- 17 Nov, 2015 40 commits
-
-
Antonio Ospite authored
v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[<ffffffffa079bd62>] [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev] [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev] [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev] [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev] [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0 [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90 [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680 [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev] [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480 [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80 [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7> 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP <ffff880095c4fce8> ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by:Antonio Ospite <ao2@ao2.it> Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Terry Heo authored
The current cx231xx driver doesn't work with bulk transfer mode. This patch makes it possible to use bulk transfer mode. Signed-off-by:
Terry Heo <terryheo@google.com> Signed-off-by:
-
Julia Lawall authored
The radio_tea5777_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Move constants to the right of binary operators. Generated by: scripts/coccinelle/misc/compare_const_fl.cocci CC: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Ricardo Ribalda authored
Vidioc-g-ext-ctrls can now be used to get the default value of the controls. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Ricardo Ribalda authored
This driver does not use the control infrastructure. Add support for the new field which on structure v4l2_ext_controls Acked-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Ricardo Ribalda authored
This driver does not use the control infrastructure. Add support for the new field which on structure v4l2_ext_controls Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Ricardo Ribalda authored
Support for new field which on v4l2_ext_controls, used to get the default value of one or more controls. Signed-off-by:
-
Ricardo Ribalda authored
Replace the obsolete field ctrl_class with "which". Make sure it not used in future modules by commenting out the field with ifndef __KERNEL_ . The field cannot be simply removed because that would be change on the kenel API to the userspace (and we don't like that). Signed-off-by:
-
Ricardo Ribalda authored
So it can be used to get the default value of a control. Without this change it is not possible to get the default value of array controls. Signed-off-by:
-
Hans Verkuil authored
The quantization bits are in bits 7-6, not 7-4, so shift by 6 instead of 4. This bug is caused by a typo in the adv7511 datasheet. Signed-off-by:
-
Mats Randgaard authored
hsync and hbackporch must also be compared Signed-off-by:
Mats Randgaard <matrandg@cisco.com> Signed-off-by:
-
Ricardo Ribalda authored
If modify_range is called but no range is changed, do not send the CH_RANGE event. Reported-by:
Dimitrios Katsaros <patcherwork@gmail.com> Signed-off-by:
-
Dan Carpenter authored
"len" comes from dvb_video_ioctl() and there is a possibility that it is zero. We do a divide by len later in the function so that's not ok. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The issue here is that we there is a static checker warning because we have a user controlled volume setting and we cap the upper bound but we allow negative numbers. Negative volumes don't make sense, so let's make these variables unsigned. Signed-off-by:
-
Hans Verkuil authored
In the 3.17 kernel the poll() behavior changed for output streams: as long as not all buffers were queued up poll() would return that userspace can write. This is fine for the write() call, but when using stream I/O this changed the behavior since the expectation was that it would wait for buffers to become available for dequeuing. This patch only enables the check whether you can queue buffers for file I/O only, and skips it for stream I/O. Signed-off-by:
-
Hans Verkuil authored
If vivid is loaded with the no_error_inj=1 option, then v4l2-compliance will fail for the video and vbi output nodes because the vivid control class has no controls. Don't add the control class for video and vbi output if no_error_inj is true. Signed-off-by:
-
Hans Verkuil authored
The wrong flags field was tested for the GO7007_BOARD_HAS_AUDIO flag: that flag is in board->main_info.flags, not in board->flags. Reported-by:
-
Hans Verkuil authored
The term "input stream" is confusing since it is not clear whether this is an input stream from the point of view of the application or from the point of view of the hardware. So replace it with the more standard term "capture stream". Signed-off-by:
-
Andrzej Hajda authored
The variable can take negative values. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Junsu Shin authored
This is a patch to the dm365_ipipe.c that fixes over 80 characters warning detected. Signed-off-by:
Junsu Shin <jjunes0@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
This driver can only be built when VIDEO_V4L2_SUBDEV_API and VIDEO_DAVINCI_VPBE_DISPLAY are also provided by the kernel. drivers/staging/media/davinci_vpfe/dm365_isif.c: In function '__isif_get_format': drivers/staging/media/davinci_vpfe/dm365_isif.c:1410:3: error: implicit declaration of function 'v4l2_subdev_get_try_format' [-Werror=implicit-function-declaration] return v4l2_subdev_get_try_format(fh, pad); ^ Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Nicholas Mc Guire authored
As the if and else branch body are identical the condition has no effect and can be dropped. Signed-off-by:
Nicholas Mc Guire <der.herr@hofr.at> Acked-by:
-
Julia Lawall authored
[media] drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c: use correct structure type name in sizeof Correct typo in the name of the type given to sizeof. Because it is the size of a pointer that is wanted, the typo has no impact on compilation or execution. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). The semantic patch used can be found in message 0 of this patch series. [Replace sizeof(type) by sizeof(variable)]] Signed-off-by:
-
Mauro Carvalho Chehab authored
Let's not mix platform_data headers with the core headers. Instead, let's create a subdir at linux/platform_data and move the headers to that common place, adding it to MAINTAINERS. The headers were moved with: mkdir include/linux/platform_data/media/; git mv include/media/gpio-ir-recv.h include/media/ir-rx51.h include/media/mmp-camera.h include/media/omap1_camera.h include/media/omap4iss.h include/media/s5p_hdmi.h include/media/si4713.h include/media/sii9234.h include/media/smiapp.h include/media/soc_camera.h include/media/soc_camera_platform.h include/media/timb_radio.h include/media/timb_video.h include/linux/platform_data/media/ And the references fixed with this script: MAIN_DIR="linux/platform_data/" PREV_DIR="media/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by:Lee Jones <lee.jones@linaro.org> Acked-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com>
-
Mauro Carvalho Chehab authored
Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: -
Alec Leamas authored
The file include/media/lirc.h describes a public interface and should thus be a public header. See kernel bug https://bugzilla.kernel.org/show_bug.cgi?id=75751 which has a manpage describing the interface + an acknowledgment that this info belongs to uapi. Signed-off-by:
-
Graham Whaley authored
Commit 5240f4e6 ("[media] DocBook/media/Makefile: Avoid make htmldocs to fail") introduced a mkdir which is always called through install_media_images from the Documentation/DocBook/Makefile htmldocs rule. If you run 'make htmldocs' more than once you get: mkdir: cannot create directory ‘./Documentation/DocBook//media_api’: File exists Add -p to the mkdir to continue no matter if the dir already exists. Signed-off-by:
Graham Whaley <graham.whaley@linux.intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Improve the comments at the header, removing kernel-doc tag from where it doesn't belong, grouping the legacy tuner functions, and improving the text. No functional changes. Signed-off-by: -
Mauro Carvalho Chehab authored
The get_state()/set_state and the corresponding data types (struct tuner_state and enum tuner_param) are old DVB interfaces that came from the DVBv3 time. Nowadays, set_params() provide a better way to set the tuner and demod parameters. So, no need to keep those legacy stuff, as all drivers that were using it got converted. With this patch, all kABI elements at dvb_frontend.h are now documented. Signed-off-by: -
Mauro Carvalho Chehab authored
It is tricky to get rid of those ops here, as the stv0299 driver wants to set frequency in separate from setting the bandwidth. So, we use a small trick: we temporarely fill the cache with 0 for either frequency or bandwidth and add some logic at set_params to only change the property(ies) that aren't zero. Signed-off-by: -
Mauro Carvalho Chehab authored
Those ops aren't used by any driver, with is weird. I suspect that mantis_vb3030 driver were not working properly... Anyway, now that the driver uses the set_parms, the DVB frontend core should do the right thing. Signed-off-by: -
Mauro Carvalho Chehab authored
Those callbacks are meant to be used only on some very specific cases. There's absolutely no need to do that at tda8261, as the only parameter that it allows to be set/get is the frequency. So, use the standard get_params() and get_frequency() kABI ops. There's no need to touch at any bridge driver, as all interactions are done via the macros at tda8261_cfg.h. Signed-off-by: -
Mauro Carvalho Chehab authored
Those two callbacks are the ones that should be used by normal DVB frontend drivers. Add support for them. Signed-off-by: -
Mauro Carvalho Chehab authored
On tda665x, set_state only sets frequency. As the kABI for set_state is meant to be used only on special cases, split the function into two, in order to allow it to be latter used by a DVBv5 cache params logic. Signed-off-by: -
Mauro Carvalho Chehab authored
The stb6100 driver has a struct tuner_state on its state struct, that it is used only to store the bandwidth. Even so, this struct is not really used, as every time the bandwidth is get or set, it goes through the hardware. So, get rid of that. Signed-off-by: -
Mauro Carvalho Chehab authored
There are several tuner_param values that aren't by any driver or core: DVBFE_TUNER_TUNERSTEP DVBFE_TUNER_IFFREQ DVBFE_TUNER_REFCLOCK DVBFE_TUNER_IQSENSE DVBFE_TUNER_DUMMY Several of those correspond to the values at the tuner_state struct with is also only initialized by not used anyware: u32 tunerstep; u32 ifreq; u32 refclock; It doesn't make sense to keep anything at the kABI that it is not used. So, get rid of them. Signed-off-by: -
Mauro Carvalho Chehab authored
Those functions should be implemented on all drivers. So, document them. Signed-off-by: -
Mauro Carvalho Chehab authored
As SEC tone and voltage could have changed during suspend(), restore them to their previous values at resume(). Signed-off-by:
-
