- 13 Nov, 2018 31 commits
-
-
John David Anglin authored
commit 1138b671 upstream. Helge noticed that the address of the os_hpmc handler was not being correctly calculated in the hpmc macro. As a result, PDCE_CHECK would fail to call os_hpmc: <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu2> 37000f7302e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> f600105e02e00000 fffffff0f0c00000 CC_MC_HPMC_MONARCH_SELECTED <Cpu2> 140003b202e00000 000000000000000b CC_ERR_HPMC_STATE_ENTRY <Cpu2> 5600100b02e00000 00000000000001a0 CC_MC_OS_HPMC_LEN_ERR <Cpu2> 5600106402e00000 fffffff0f0438e70 CC_MC_BR_TO_OS_HPMC_FAILED <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu2> 37000f7302e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> 4000109f02e00000 0000000000000000 CC_MC_HPMC_INITIATED <Cpu2> 4000101902e00000 0000000000000000 CC_MC_MULTIPLE_HPMCS <Cpu2> 030010d502e00000 0000000000000000 CC_CPU_STOP The address problem can be seen by dumping the fault vector: 0000000040159000 <fault_vector_20>: 40159000: 63 6f 77 73 stb r15,-2447(dp) 40159004: 20 63 61 6e ldil L%b747000,r3 40159008: 20 66 6c 79 ldil L%-1c3b3000,r3 ... 40159020: 08 00 02 40 nop 40159024: 20 6e 60 02 ldil L%15d000,r3 40159028: 34 63 00 00 ldo 0(r3),r3 4015902c: e8 60 c0 02 bv,n r0(r3) 40159030: 08 00 02 40 nop 40159034: 00 00 00 00 break 0,0 40159038: c0 00 70 00 bb,*< r0,sar,40159840 <fault_vector_20+0x840> 4015903c: 00 00 00 00 break 0,0 Location 40159038 should contain the physical address of os_hpmc: 000000004015d000 <os_hpmc>: 4015d000: 08 1a 02 43 copy r26,r3 4015d004: 01 c0 08 a4 mfctl iva,r4 4015d008: 48 85 00 68 ldw 34(r4),r5 This patch moves the address setup into initialize_ivt to resolve the above problem. I tested the change by dumping the HPMC entry after setup: 0000000040209020: 8000240 0000000040209024: 206a2004 0000000040209028: 34630ac0 000000004020902c: e860c002 0000000040209030: 8000240 0000000040209034: 1bdddce6 0000000040209038: 15d000 000000004020903c: 1a0 Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Arcari authored
commit afd0b1fb upstream. acpi_pcc_probe() calls acpi_table_parse_entries_array() but fails to check for an error return. This in turn can result in calling kcalloc() with a negative count as well as emitting the following misleading erorr message: [ 2.642015] Could not allocate space for PCC mbox channels Fixes: 8f8027c5 (mailbox: PCC: erroneous error message when parsing ACPI PCCT) Signed-off-by:
David Arcari <darcari@redhat.com> Reviewed-by:
Al Stone <ahs3@redhat.com> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jan Glauber authored
commit 0711e8c1 upstream. Please note that below oops is from an older kernel, but the same race seems to be present in the upstream kernel too. ---8<--- The following panic was encountered during removing the ipmi_ssif module: [ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090 [ 526.360464] Mem abort info: [ 526.363257] ESR = 0x86000007 [ 526.366304] Exception class = IABT (current EL), IL = 32 bits [ 526.372221] SET = 0, FnV = 0 [ 526.375269] EA = 0, S1PTW = 0 [ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416 [ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000 [ 526.396141] Internal error: Oops: 86000007 [#1] SMP [ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif] [ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1 [ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018 [ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO) [ 526.489713] pc : 0xffff000006923090 [ 526.493198] lr : call_timer_fn+0x34/0x178 [ 526.497194] sp : ffff000009b0bdd0 [ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082 [ 526.505796] x27: 0000000000000002 x26: ffff000009515188 [ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018 [ 526.516396] x23: ffff000009519660 x22: dead000000000200 [ 526.521696] x21: ffff000006923090 x20: 0000000000000100 [ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000 [ 526.532295] x17: 000000000000000e x16: 0000000000000007 [ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c [ 526.542894] x13: 0000000000000000 x12: 0000000000000000 [ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88 [ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005 [ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020 [ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20 [ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40 [ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40 [ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc) [ 526.586854] Call trace: [ 526.589289] 0xffff000006923090 [ 526.592419] expire_timers+0xc8/0x130 [ 526.596070] run_timer_softirq+0xec/0x1b0 [ 526.600070] __do_softirq+0x134/0x328 [ 526.603726] irq_exit+0xc8/0xe0 [ 526.606857] __handle_domain_irq+0x6c/0xc0 [ 526.610941] gic_handle_irq+0x84/0x188 [ 526.614679] el1_irq+0xe8/0x180 [ 526.617822] cpuidle_enter_state+0xa0/0x328 [ 526.621993] cpuidle_enter+0x34/0x48 [ 526.625564] call_cpuidle+0x44/0x70 [ 526.629040] do_idle+0x1b8/0x1f0 [ 526.632256] cpu_startup_entry+0x2c/0x30 [ 526.636174] secondary_start_kernel+0x11c/0x130 [ 526.640694] Code: bad PC value [ 526.643800] ---[ end trace d020b0b8417c2498 ]--- [ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt [ 526.654778] SMP: stopping secondary CPUs [ 526.658734] Kernel Offset: disabled [ 526.662211] CPU features: 0x5800c38 [ 526.665688] Memory Limit: none [ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Prevent mod_timer from arming a timer that was already removed by del_timer during module unload. Signed-off-by:
Jan Glauber <jglauber@cavium.com> Cc: <stable@vger.kernel.org> # 3.19 Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Masami Hiramatsu authored
commit 2e62024c upstream. The following commit: a19b2e3d ("kprobes/x86: Remove IRQ disabling from ftrace-based/optimized kprobes”) removed local_irq_save/restore() from optimized_callback(), the handler might be interrupted by the rescheduling interrupt and might be rescheduled - so we must not use the preempt_enable_no_resched() macro. Use preempt_enable() instead, to not lose preemption events. [ mingo: Improved the changelog. ] Reported-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dwmw@amazon.co.uk Fixes: a19b2e3d ("kprobes/x86: Remove IRQ disabling from ftrace-based/optimized kprobes”) Link: http://lkml.kernel.org/r/154002887331.7627.10194920925792947001.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dan Williams authored
commit d3abaf43 upstream. The Address Range Scrub implementation tried to skip running scrubs against ranges that were already scrubbed by the BIOS. Unfortunately that support also resulted in early scrub completions as evidenced by this debug output from nfit_test: nd_region region9: ARS: range 1 short complete nd_region region3: ARS: range 1 short complete nd_region region4: ARS: range 2 ARS start (0) nd_region region4: ARS: range 2 short complete ...i.e. completions without any indications that the scrub was started. This state of affairs was hard to see in the code due to the proliferation of state bits and mistakenly trying to track done state per-range when the completion is a global property of the bus. So, kill the four ARS state bits (ARS_REQ, ARS_REQ_REDO, ARS_DONE, and ARS_SHORT), and replace them with just 2 request flags ARS_REQ_SHORT and ARS_REQ_LONG. The implementation will still complete and reap the results of BIOS initiated ARS, but it will not attempt to use that information to affect the completion status of scrubbing the ranges from a Linux perspective. Instead, try to synchronously run a short ARS per range at init time and schedule a long scrub in the background. If ARS is busy with an ARS request, schedule both a short and a long scrub for when ARS returns to idle. This logic also satisfies the intent of what ARS_REQ_REDO was trying to achieve. The new rule is that the REQ flag stays set until the next successful ars_start() for that range. With the new policy that the REQ flags are not cleared until the next start, the implementation no longer loses requests as can be seen from the following log: nd_region region3: ARS: range 1 ARS start short (0) nd_region region9: ARS: range 1 ARS start short (0) nd_region region3: ARS: range 1 complete nd_region region4: ARS: range 2 ARS start short (0) nd_region region9: ARS: range 1 complete nd_region region9: ARS: range 1 ARS start long (0) nd_region region4: ARS: range 2 complete nd_region region3: ARS: range 1 ARS start long (0) nd_region region9: ARS: range 1 complete nd_region region3: ARS: range 1 complete nd_region region4: ARS: range 2 ARS start long (0) nd_region region4: ARS: range 2 complete ...note that the nfit_test emulated driver provides 2 buses, that is why some of the range indices are duplicated. Notice that each range now successfully completes a short and long scrub. Cc: <stable@vger.kernel.org> Fixes: 14c73f99 ("nfit, address-range-scrub: introduce nfit_spa->ars_state") Fixes: cc3d3458 ("acpi/nfit: queue issuing of ars when an uc error...") Reported-by:
Jacek Zloch <jacek.zloch@intel.com> Reported-by:
Krzysztof Rusocki <krzysztof.rusocki@intel.com> Reviewed-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Erik Schmauss authored
commit c64baa3a upstream. AML opcodes come in two lengths: 1-byte opcodes and 2-byte, extended opcodes. If an error occurs due to illegal opcodes during table load, the AML parser needs to continue loading the table. In order to do this, it needs to skip parsing of the offending opcode and operands associated with that opcode. This change fixes the AML parse loop to correctly skip parsing of incorrect extended opcodes. Previously, only the short opcodes were skipped correctly. Signed-off-by:
Erik Schmauss <erik.schmauss@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Erik Schmauss authored
commit 4abb951b upstream. The table load process omitted adding the operation region address range to the global list. This omission is problematic because the OS queries the global list to check for address range conflicts before deciding which drivers to load. This commit may result in warning messages that look like the following: [ 7.871761] ACPI Warning: system_IO range 0x00000428-0x0000042F conflicts with op_region 0x00000400-0x0000047F (\PMIO) (20180531/utaddress-213) [ 7.871769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver However, these messages do not signify regressions. It is a result of properly adding address ranges within the global address list. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011Tested-by:
Jean-Marc Lenoir <archlinux@jihemel.com> Signed-off-by:
-
Bart Van Assche authored
commit 83b2348e upstream. Since acpi_os_get_timer() may be called after the timer subsystem has been suspended, use the jiffies counter instead of ktime_get(). This patch avoids that the following warning is reported during hibernation: WARNING: CPU: 0 PID: 612 at kernel/time/timekeeping.c:751 ktime_get+0x116/0x120 RIP: 0010:ktime_get+0x116/0x120 Call Trace: acpi_os_get_timer+0xe/0x30 acpi_ds_exec_begin_control_op+0x175/0x1de acpi_ds_exec_begin_op+0x2c7/0x39a acpi_ps_create_op+0x573/0x5e4 acpi_ps_parse_loop+0x349/0x1220 acpi_ps_parse_aml+0x25b/0x6da acpi_ps_execute_method+0x327/0x41b acpi_ns_evaluate+0x4e9/0x6f5 acpi_ut_evaluate_object+0xd9/0x2f2 acpi_rs_get_method_data+0x8f/0x114 acpi_walk_resources+0x122/0x1b6 acpi_pci_link_get_current.isra.2+0x157/0x280 acpi_pci_link_set+0x32f/0x4a0 irqrouter_resume+0x58/0x80 syscore_resume+0x84/0x380 hibernation_snapshot+0x20c/0x4f0 hibernate+0x22d/0x3a6 state_store+0x99/0xa0 kobj_attr_store+0x37/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x1a5/0x240 __vfs_write+0xd2/0x410 vfs_write+0x101/0x250 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 164a08ce (ACPICA: Dispatcher: Introduce timeout mechanism for infinite loop detection) Reported-by:
Fengguang Wu <fengguang.wu@intel.com> References: https://lists.01.org/pipermail/lkp/2018-April/008406.htmlSigned-off-by:
Bart Van Assche <bvanassche@acm.org> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by:
-
Maciej S. Szmigiero authored
commit 95691e3e upstream. Currently, "disable_clkrun" yenta_socket module parameter is only implemented for TI CardBus bridges. Add also an implementation for Ricoh bridges that have the necessary setting documented in publicly available datasheets. Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work correctly unless the CLKRUN protocol is disabled. Let's also make it clear in its description that the "disable_clkrun" module parameter only works on these two previously mentioned brands of CardBus bridges. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Cc: stable@vger.kernel.org Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
He Zhe authored
commit a3ceed87 upstream. early_cma does not check input argument before passing it to simple_strtoull. The argument would be a NULL pointer if "cma", without its value, is set in command line and thus causes the following panic. PANIC: early exception 0xe3 IP 10:ffffffffa3e9db8d error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-yocto-standard+ #7 [ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70 ... [ 0.000000] Call Trace: [ 0.000000] simple_strtoull+0x29/0x70 [ 0.000000] memparse+0x26/0x90 [ 0.000000] early_cma+0x17/0x6a [ 0.000000] do_early_param+0x57/0x8e [ 0.000000] parse_args+0x208/0x320 [ 0.000000] ? rdinit_setup+0x30/0x30 [ 0.000000] parse_early_options+0x29/0x2d [ 0.000000] ? rdinit_setup+0x30/0x30 [ 0.000000] parse_early_param+0x36/0x4d [ 0.000000] setup_arch+0x336/0x99e [ 0.000000] start_kernel+0x6f/0x4e6 [ 0.000000] x86_64_start_reservations+0x24/0x26 [ 0.000000] x86_64_start_kernel+0x6f/0x72 [ 0.000000] secondary_startup_64+0xa4/0xb0 This patch adds a check to prevent the panic. Signed-off-by:
He Zhe <zhe.he@windriver.com> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Cc: stable@vger.kernel.org Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Rafael J. Wysocki authored
commit da5e79bc upstream. If the policy limits change between invocations of cs_dbs_update(), the requested frequency value stored in dbs_info may not be updated and the function may use a stale value of it next time. Moreover, if idle periods are takem into account by cs_dbs_update(), the requested frequency value stored in dbs_info may be below the min policy limit, which is incorrect. To fix these problems, always update the requested frequency value in dbs_info along with the local copy of it when the previous requested frequency is beyond the policy limits and avoid decreasing the requested frequency below the min policy limit when taking idle periods into account. Fixes: abb66279 (cpufreq: conservative: Fix next frequency selection) Fixes: 00bfe058 (cpufreq: conservative: Decrease frequency faster for deferred updates) Reported-by:
Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Ming Lei authored
commit 34ffec60 upstream. Obviously the created writesame bio has to be aligned with logical block size, and use bio_allowed_max_sectors() to retrieve this number. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: b49a0871 ("block: remove split code in blkdev_issue_{discard,write_same}") Tested-by:
Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ming Lei authored
commit 1adfc5e4 upstream. Obviously the created discard bio has to be aligned with logical block size. This patch introduces the helper of bio_allowed_max_sectors() for this purpose. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: 744889b7 ("block: don't deal with discard limit in blkdev_issue_discard()") Fixes: a22c4d7e ("block: re-add discard_granularity and alignment checks") Reported-by:
-
Jens Axboe authored
commit 52990a5f upstream. We're only setting up the bounce bio sets if we happen to need bouncing for regular HIGHMEM, not if we only need it for ISA devices. Protect the ISA bounce setup with a mutex, since it's being invoked from driver init functions and can thus be called in parallel. Cc: stable@vger.kernel.org Reported-by:
Ondrej Zary <linux@rainbow-software.org> Tested-by:
-
Hou Tao authored
commit 92e2921f upstream. When an invalid mount option is passed to jffs2, jffs2_parse_options() will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will be used (use-after-free) and freeed (double-free) in jffs2_kill_sb(). Fix it by removing the buggy invocation of kfree() when getting invalid mount options. Fixes: 92abc475 ("jffs2: implement mount option parsing and compression overriding") Cc: stable@kernel.org Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Dmitry Bazhenov authored
commit e7c6a556 upstream. Devices with compatible="pmbus" field have zero initial page count, and pmbus_clear_faults() being called before the page count auto- detection does not actually clear faults because it depends on the page count. Non-cleared faults in its turn may fail the subsequent page count auto-detection. This patch fixes this problem by calling pmbus_clear_fault_page() for currently set page and calling pmbus_clear_faults() after the page count was detected. Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Bazhenov <bazhenov.dn@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Tang Junhui authored
commit 2d6cb6ed upstream. refill->end record the last key of writeback, for example, at the first time, keys (1,128K) to (1,1024K) are flush to the backend device, but the end key (1,1024K) is not included, since the bellow code: if (bkey_cmp(k, refill->end) >= 0) { ret = MAP_DONE; goto out; } And in the next time when we refill writeback keybuf again, we searched key start from (1,1024K), and got a key bigger than it, so the key (1,1024K) missed. This patch modify the above code, and let the end key to be included to the writeback key buffer. Signed-off-by:
Tang Junhui <tang.junhui.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Tang Junhui authored
commit 2e17a262 upstream. When bcache device is clean, dirty keys may still exist after journal replay, so we need to count these dirty keys even device in clean status, otherwise after writeback, the amount of dirty data would be incorrect. Signed-off-by:
-
Tang Junhui authored
commit dd0c9179 upstream. When doing ioctl in flash device, it will call ioctl_dev() in super.c, then we should not to get cached device since flash only device has no backend device. This patch just move the jugement dc->io_disable to cached_dev_ioctl() to make ioctl in flash device correctly. Fixes: 0f0709e6 ("bcache: stop bcache device when backing device is offline") Signed-off-by:
-
Tang Junhui authored
commit 502b2915 upstream. Missed reading IOs are identified by s->cache_missed, not the s->cache_miss, so in trace_bcache_read() using trace_bcache_read to identify whether the IO is missed or not. Signed-off-by:
-
Rafał Miłecki authored
commit 0976eda7 upstream. During implementation of the new API bcm_qspi_bspi_set_flex_mode() has been modified breaking calculation of address length. An unnecessary multiplication was added breaking flash reads. Fixes: 5f195ee7 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Rafał Miłecki authored
commit 940ec770 upstream. Fixing/optimizing bcm_qspi_bspi_read() performance introduced two changes: 1) It added a loop to read all requested data using multiple BSPI ops. 2) It bumped max size of a single BSPI block request from 256 to 512 B. The later change resulted in occasional BSPI timeouts causing a regression. For some unknown reason hardware doesn't always handle reads as expected when using 512 B chunks. In such cases it may happen that BSPI returns amount of requested bytes without the last 1-3 ones. It provides the remaining bytes later but doesn't raise an interrupt until another LR start. Switching back to 256 B reads fixes that problem and regression. Fixes: 345309fa ("spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance") Signed-off-by:
-
Chuanhua Han authored
commit e757996c upstream. We need that to adjust the len of the 2nd transfer (called data in spi-mem) if it's too long to fit in a SPI message or SPI transfer. Fixes: c36ff266 ("spi: Extend the core to ease integration of SPI memory controllers") Cc: <stable@vger.kernel.org> Signed-off-by:
Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by:
-
Ahmad Fatoum authored
commit 00041227 upstream. fsl_qspi_get_seqid() may return -EINVAL, but fsl_qspi_init_ahb_read() doesn't check for error codes with the result that -EINVAL could find itself signalled over the bus. In conjunction with the LS1046A SoC's A-009283 errata ("Illegal accesses to SPI flash memory can result in a system hang") this illegal access to SPI flash memory results in a system hang if userspace attempts reading later on. Avoid this by always checking fsl_qspi_get_seqid()'s return value and bail out otherwise. Fixes: e46ecda7 ("mtd: spi-nor: Add Freescale QuadSPI driver") Cc: stable@vger.kernel.org Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
-
Mika Westerberg authored
commit 42460c31 upstream. Intel Ice Lake exposes the SPI serial flash controller as a PCI device in the same way than Intel Denverton. Add Ice Lake SPI serial flash PCI ID to the driver list of supported devices. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Marek Vasut <marek.vasut@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Liu Xiang authored
commit 41fe2429 upstream. If the size of spi-nor flash is larger than 16MB, the read_opcode is set to SPINOR_OP_READ_1_1_4_4B, and fsl_qspi_get_seqid() will return -EINVAL when cmd is SPINOR_OP_READ_1_1_4_4B. This can cause read operation fail. Fixes: e46ecda7 ("mtd: spi-nor: Add Freescale QuadSPI driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 6c925b33 upstream. We should only iomap the area of the chip that is memory mapped. Otherwise we could be mapping devices beyond the memory space or that belong to other devices. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Fixes: ebd71e3a ("mtd: maps: gpio-addr-flash: fix warnings and make more portable") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Miquel Raynal authored
commit 53c83b59 upstream. With the current implementation, the complete() in the IRQ handler is supposed to be called only if the register status has one or the other RDY bit set. Other events might trigger an interrupt as well if enabled, but should not end-up with a complete() call. For this purpose, the code was checking if the other bits were set, in this case complete() was not called. This is wrong as two events might happen in a very tight time-frame and if the NDSR status read reports two bits set (eg. RDY(0) and RDDREQ) at the same time, complete() was not called. This logic would lead to timeouts in marvell_nfc_wait_op() and has been observed on PXA boards (NFCv1) in the Hamming write path. Fixes: 02f26ecf ("mtd: nand: add reworked Marvell NAND controller driver") Cc: stable@vger.kernel.org Reported-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Tested-by:
-
Linus Walleij authored
[ Upstream commit 833eacc7 ] The MXS driver was calling back into the GPIO API from its irqchip. This is not very elegant, as we are a driver, let's just shortcut back into the gpio_chip .get() function instead. This is a tricky case since the .get() callback is not in this file, instead assigned by bgpio_init(). Calling the function direcly in the gpio_chip is however the lesser evil. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Huacai Chen authored
[ Upstream commit c61c7def ] Commit ea7e0480 ("MIPS: VDSO: Always map near top of user memory") set VDSO_RANDOMIZE_SIZE to 256MB for 64bit kernel. But take a look at arch/mips/mm/mmap.c we can see that MIN_GAP is 128MB, which means the mmap_base may be at (user_address_top - 128MB). This make the stack be surrounded by mmaped areas, then stack expanding fails and causes a segmentation fault. Therefore, VDSO_RANDOMIZE_SIZE should be less than MIN_GAP and this patch reduce it to 64MB. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: ea7e0480 ("MIPS: VDSO: Always map near top of user memory") Patchwork: https://patchwork.linux-mips.org/patch/20910/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com> Cc: stable@vger.kernel.org # 4.19 Signed-off-by:
-
Daniel Borkmann authored
commit 0962590e upstream. ALU operations on pointers such as scalar_reg += map_value_ptr are handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr and range in the register state share a union, so transferring state through dst_reg->range = ptr_reg->range is just buggy as any new map_ptr in the dst_reg is then truncated (or null) for subsequent checks. Fix this by adding a raw member and use it for copying state over to dst_reg. Fixes: f1174f77 ("bpf/verifier: rework value tracking") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Edward Cree <ecree@solarflare.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
- 04 Nov, 2018 9 commits
-
-
Greg Kroah-Hartman authored
-
Nikolay Aleksandrov authored
commit 0fe5119e upstream. Recently a check was added which prevents marking of routers with zero source address, but for IPv6 that cannot happen as the relevant RFCs actually forbid such packets: RFC 2710 (MLDv1): "To be valid, the Query message MUST come from a link-local IPv6 Source Address, be at least 24 octets long, and have a correct MLD checksum." Same goes for RFC 3810. And also it can be seen as a requirement in ipv6_mc_check_mld_query() which is used by the bridge to validate the message before processing it. Thus any queries with :: source address won't be processed anyway. So just remove the check for zero IPv6 source address from the query processing function. Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 1f2b5b8e ] Fixes: 8b30ca73 ("sparc: Add all necessary direct socket system calls.") Reported-by:
Joseph Myers <joseph@codesourcery.com> Signed-off-by:
-
David Miller authored
[ Upstream commit 5b4fc388 ] Right now if we get a corrupted user stack frame we do a do_exit(SIGILL) which is not helpful. If under a debugger, this behavior causes the inferior process to exit. So the register and other state cannot be examined at the time of the event. Instead, conditionally log a rate limited kernel log message and then force a SIGSEGV. With bits and ideas borrowed (as usual) from powerpc. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 2b4792ea ] Some drivers reference it via node_distance(), for example the NVME host driver core. ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 Signed-off-by:
-
Xin Long authored
[ Upstream commit 71335836 ] When getting pr_assocstatus and pr_streamstatus by sctp_getsockopt, it doesn't correctly process the case when policy is set with SCTP_PR_SCTP_ALL | SCTP_PR_SCTP_MASK. It even causes a slab-out-of-bounds in sctp_getsockopt_pr_streamstatus(). This patch fixes it by return -EINVAL for this case. Fixes: 0ac1077e ("sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL") Reported-by: syzbot+5da0d0a72a9e7d791748@syzkaller.appspotmail.com Suggested-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit 5ef79151 ] The mentioned commit needs to be reverted because we cannot pass string allocated on stack to request_irq(). This function stores uses this pointer for later use (e.g. /proc/interrupts) so we need to keep this string persistently. Fixes: d6d9704a ("be2net: remove desc field from be_eq_obj") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 649f0837 ] It was reported that WoL from S5 is broken (WoL from S3 works) and the analysis showed that during system shutdown the network interface was brought down already when the actual kernel shutdown started. Therefore netif_running() returned false and as a consequence the PHY was suspended. Obviously WoL wasn't working then. To fix this the original patch needs to be effectively reverted. A side effect is that when normally bringing down the interface and WoL is enabled the PHY will remain powered on (like it was before the original patch). Fixes: fe87bef0 ("r8169: don't check WoL when powering down PHY and interface is down") Reported-by:
Neil MacLeod <neil@nmacleod.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commti ece23711 ] Just like with normal GRO processing, we have to initialize skb->next to NULL when we unlink overflow packets from the GRO hash lists. Fixes: d4546c25 ("net: Convert GRO SKB handling to list_head.") Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by:
-
