1. 25 Aug, 2014 3 commits
    • Linus Torvalds's avatar
      Merge tag 'renesas-sh-drivers-for-v3.17' of... · dd5957b7
      Linus Torvalds authored
      Merge tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas
      
      Pull SH driver fix from Simon Horman:
       "Confine SH_INTC to platforms that need it"
      
      * tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        sh: intc: Confine SH_INTC to platforms that need it
      dd5957b7
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 497c01dd
      Linus Torvalds authored
      Pull MIPS fixes from Ralf Baechle:
       "Pretty much all across the field so with this we should be in
        reasonable shape for the upcoming -rc2"
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: OCTEON: make get_system_type() thread-safe
        MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores
        MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'
        MIPS: EVA: Add new EVA header
        MIPS: scall64-o32: Fix indirect syscall detection
        MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64
        MIPS: Loongson: Fix COP2 usage for preemptible kernel
        MIPS: NL: Fix nlm_xlp_defconfig build error
        MIPS: Remove race window in page fault handling
        MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G
        MIPS: Alchemy: Fix db1200 PSC clock enablement
        MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785
        MIPS: Remove duplicated include from numa.c
        MIPS: Add common plat_irq_dispatch declaration
        MIPS: MSP71xx: remove unused plat_irq_dispatch() argument
        MIPS: GIC: Remove useless parens from GICBIS().
        MIPS: perf: Mark pmu interupt IRQF_NO_THREAD
      497c01dd
    • Linus Torvalds's avatar
      Merge tag 'trace-fixes-v3.17-rc1' of... · 01e9982a
      Linus Torvalds authored
      Merge tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
      
      Pull fix for ftrace function tracer/profiler conflict from Steven Rostedt:
       "The rewrite of the ftrace code that makes it possible to allow for
        separate trampolines had a design flaw with the interaction between
        the function and function_graph tracers.
      
        The main flaw was the simplification of the use of multiple tracers
        having the same filter (like function and function_graph, that use the
        set_ftrace_filter file to filter their code).  The design assumed that
        the two tracers could never run simultaneously as only one tracer can
        be used at a time.  The problem with this assumption was that the
        function profiler could be implemented on top of the function graph
        tracer, and the function profiler could run at the same time as the
        function tracer.  This caused the assumption to be broken and when
        ftrace detected this failed assumpiton it would spit out a nasty
        warning and shut itself down.
      
        Instead of using a single ftrace_ops that switches between the
        function and function_graph callbacks, the two tracers can again use
        their own ftrace_ops.  But instead of having a complex hierarchy of
        ftrace_ops, the filter fields are placed in its own structure and the
        ftrace_ops can carefully use the same filter.  This change took a bit
        to be able to allow for this and currently only the global_ops can
        share the same filter, but this new design can easily be modified to
        allow for any ftrace_ops to share its filter with another ftrace_ops.
      
        The first four patches deal with the change of allowing the ftrace_ops
        to share the filter (and this needs to go to 3.16 as well).
      
        The fifth patch fixes a bug that was also caused by the new changes
        but only for archs other than x86, and only if those archs implement a
        direct call to the function_graph tracer which they do not do yet but
        will in the future.  It does not need to go to stable, but needs to be
        fixed before the other archs update their code to allow direct calls
        to the function_graph trampoline"
      
      * tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
        ftrace: Use current addr when converting to nop in __ftrace_replace_code()
        ftrace: Fix function_profiler and function tracer together
        ftrace: Fix up trampoline accounting with looping on hash ops
        ftrace: Update all ftrace_ops for a ftrace_hash_ops update
        ftrace: Allow ftrace_ops to use the hashes from other ops
      01e9982a
  2. 24 Aug, 2014 12 commits
  3. 23 Aug, 2014 5 commits
    • Heiko Stuebner's avatar
      MAINTAINERS: add new Rockchip SoC list · 00250b52
      Heiko Stuebner authored
      Add the new list that Rockchip-specific patches should also be directed to.
      Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
      00250b52
    • Heiko Stuebner's avatar
      ARM: dts: rockchip: readd missing mmc0 pinctrl settings · 1302d32c
      Heiko Stuebner authored
      During the restructuring of the Rockchip Cortex-A9 dtsi files it seems
      like the pinctrl settings vanished at some point from the mmc0 support.
      
      This of course renders them unusable, so readd the necessary pinctrl
      properties.
      Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
      1302d32c
    • Olof Johansson's avatar
      Merge tag 'sunxi-dt-for-3.17-2' of... · 2136edf3
      Olof Johansson authored
      Merge tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
      
      Merge "Allwinner DT changes, take 2" from Maxime Ripard:
      
      Only a single patch in here that fixes a DTC warning.
      
      * tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
        ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      2136edf3
    • Steven Rostedt (Red Hat)'s avatar
      ftrace: Use current addr when converting to nop in __ftrace_replace_code() · 39b5552c
      Steven Rostedt (Red Hat) authored
      In __ftrace_replace_code(), when converting the call to a nop in a function
      it needs to compare against the "curr" (current) value of the ftrace ops, and
      not the "new" one. It currently does not affect x86 which is the only arch
      to do the trampolines with function graph tracer, but when other archs that do
      depend on this code implement the function graph trampoline, it can crash.
      
      Here's an example when ARM uses the trampolines (in the future):
      
       ------------[ cut here ]------------
       WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4()
       Modules linked in: omap_rng rng_core ipv6
       CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28-dirty #52
       [<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24)
       [<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94)
       [<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c)
       [<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34)
       [<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4)
       [<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c)
       [<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164)
       [<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c)
       [<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134)
       [<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130)
       [<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc)
       [<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc)
       [<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20)
       ---[ end trace dc9ce72c5b617d8f ]---
      [   65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c
      [   65.054070]  actual: 85:1b:00:eb
      
      Fixes: 7413af1f "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global"
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      39b5552c
    • Steven Rostedt (Red Hat)'s avatar
      ftrace: Fix function_profiler and function tracer together · 5f151b24
      Steven Rostedt (Red Hat) authored
      The latest rewrite of ftrace removed the separate ftrace_ops of
      the function tracer and the function graph tracer and had them
      share the same ftrace_ops. This simplified the accounting by removing
      the multiple layers of functions called, where the global_ops func
      would call a special list that would iterate over the other ops that
      were registered within it (like function and function graph), which
      itself was registered to the ftrace ops list of all functions
      currently active. If that sounds confusing, the code that implemented
      it was also confusing and its removal is a good thing.
      
      The problem with this change was that it assumed that the function
      and function graph tracer can never be used at the same time.
      This is mostly true, but there is an exception. That is when the
      function profiler uses the function graph tracer to profile.
      The function profiler can be activated the same time as the function
      tracer, and this breaks the assumption and the result is that ftrace
      will crash (it detects the error and shuts itself down, it does not
      cause a kernel oops).
      
      To solve this issue, a previous change allowed the hash tables
      for the functions traced by a ftrace_ops to be a pointer and let
      multiple ftrace_ops share the same hash. This allows the function
      and function_graph tracer to have separate ftrace_ops, but still
      share the hash, which is what is done.
      
      Now the function and function graph tracers have separate ftrace_ops
      again, and the function tracer can be run while the function_profile
      is active.
      
      Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      5f151b24
  4. 22 Aug, 2014 20 commits
    • Linus Torvalds's avatar
      Merge tag 'pwm/for-3.17-rc2' of... · 451fd722
      Linus Torvalds authored
      Merge tag 'pwm/for-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
      
      Pull pwm fix from Thierry Reding:
       "Just one bugfix for the PWM lookup table code that would cause a PWM
        channel to be set to the wrong period and polarity for non-perfect
        matches"
      
      * tag 'pwm/for-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
        pwm: Fix period and polarity in pwm_get() for non-perfect matches
      451fd722
    • Michal Kazior's avatar
      mac80211: fix channel switch for chanctx-based drivers · 47e4df94
      Michal Kazior authored
      The new_ctx pointer is set only for non-chanctx drivers.  This yielded a
      crash for chanctx-based drivers during channel switch finalization:
      
        BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
        IP: ieee80211_vif_use_reserved_switch+0x71c/0xb00 [mac80211]
      
      Use an adequate chanctx pointer to fix this.
      Reported-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      47e4df94
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 433ab34d
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Here are some bug fixes that have piled up during ksummit/linuxcon.
      
         1) Fix endian problems in ibmveth, from Anton Blanchard.
      
         2) IPV6 routing code does GFP_KERNEL allocation in atomic, fix from
            Benjamin Block.
      
         3) SCTP association fixes from Daniel Borkmann.
      
         4) When multiple VLAN headers are present we have to make sure the
            second and subsequent ones are pullable in the SKB otherwise we
            blindly dereference garbage.  From Jiri Benc.
      
         5) The argument adjustment of the signature of hlist_add_after*()
            introduced a regression in the batman-adv code, fix from Sven
            Eckelmann.
      
         6) Fix TX hang handling to avoid a panic in i40e, from Anjali Singhai
            Jain.
      
         7) PTP flag test is inverted in i40e driver, from Jesse Brandeburg.
      
         8) ATM LEC driver needs to hold RTNL mutex over MTU changes, from
            Chas Williams.
      
         9) Truncate packets larger then the TPACKET_V3 format configured
            buffers, otherwise we overwrite past the end of said buffers.
            From Eric Dumazet.
      
        10) Fix endianness bugs in qlcnic firmware handling, from Rajesh
            Borundia and Shahed Shaikh.
      
        11) CXGB4 sometimes doesn't get all of the TX completion events it
            should resulting in SKBs getting stuck in the TX queue, from
            Hariprasad Shenai.
      
        12) When the FEC chip's PTP clock is disabled, you can't access the
            register.  Add necessary checks to avoid the resulting hang, from
            Fugang Duan"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits)
        drivers: isdn: eicon: xdi_msg.h: Fix typo in #ifndef
        net: sctp: fix suboptimal edge-case on non-active active/retrans path selection
        net: sctp: spare unnecessary comparison in sctp_trans_elect_best
        net: ethernet: broadcom: bnx2x: Remove redundant #ifdef
        ibmveth: Fix endian issues with rx_no_buffer statistic
        net: xgene: fix possible NULL dereference in xgene_enet_free_desc_rings()
        openvswitch: fix panic with multiple vlan headers
        net: ipv6: fib: don't sleep inside atomic lock
        net: fec: ptp: avoid register access when ipg clock is disabled
        cxgb4: Free completed tx skbs promptly
        cxgb4: Fix race condition in cleanup
        sctp: not send SCTP_PEER_ADDR_CHANGE notifications with failed probe
        bnx2x: Revert UNDI flushing mechanism
        qlcnic: Fix endianess issue in firmware load from file operation
        qlcnic: Fix endianess issue in FW dump template header
        qlcnic: Fix flash access interface to application
        MAINTAINERS: Add section for MRF24J40 IEEE 802.15.4 radio driver
        macvlan: Allow setting multicast filter on all macvlan types
        packet: handle too big packets for PACKET_V3
        MAINTAINERS: add entry for ec_bhf driver
        ...
      433ab34d
    • Steven Rostedt (Red Hat)'s avatar
      ftrace: Fix up trampoline accounting with looping on hash ops · bce0b6c5
      Steven Rostedt (Red Hat) authored
      Now that a ftrace_hash can be shared by multiple ftrace_ops, they can dec
      the rec->flags by more than once (one per those that share the ftrace_hash).
      This means that the tramp_hash may not have a hash item when it was added.
      
      For example, if two ftrace_ops share a hash for a ftrace record, and the
      first ops has a trampoline, when it adds itself it will set the rec->flags
      TRAMP flag and increments its nr_trampolines counter. When the second ops
      is added, it must clear that tramp flag but also decrement the other ops
      that shares its hash. As the update to the function callbacks has not yet
      been performed, the other ops will not have the tramp hash set yet and it
      can not be used to know to decrement its nr_trampolines.
      
      Luckily, the tramp_hash does not need to be used. As the ftrace_mutex is
      held, a ops with a trampoline to a record during an update of another ops
      that shares the record will have its func_hash pointing to it. Since a
      trampoline can only be set for a record if only one ops is attached to it,
      we can just check if the record has a trampoline (the FTRACE_FL_TRAMP flag
      is set) and then find the ops that has this record in its hashes.
      
      Also added some output to help debug when things go wrong.
      
      Cc: stable@vger.kernel.org # 3.16+ (apply after 3.17-rc4 is out)
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      bce0b6c5
    • Rasmus Villemoes's avatar
      drivers: isdn: eicon: xdi_msg.h: Fix typo in #ifndef · faaa5524
      Rasmus Villemoes authored
      Test for definedness of the macro which is actually defined (the
      change is hard to see: it is s/SSS/SSA/).
      Signed-off-by: default avatarRasmus Villemoes <linux@rasmusvillemoes.dk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      faaa5524
    • Daniel Borkmann's avatar
      net: sctp: fix suboptimal edge-case on non-active active/retrans path selection · aa4a83ee
      Daniel Borkmann authored
      In SCTP, selection of active (T.ACT) and retransmission (T.RET)
      transports is being done whenever transport control operations
      (UP, DOWN, PF, ...) are engaged through sctp_assoc_control_transport().
      
      Commits 4c47af4d ("net: sctp: rework multihoming retransmission
      path selection to rfc4960") and a7288c4d ("net: sctp: improve
      sctp_select_active_and_retran_path selection") have both improved
      it towards a more fine-grained and optimal path selection.
      
      Currently, the selection algorithm for T.ACT and T.RET is as follows:
      
      1) Elect the two most recently used ACTIVE transports T1, T2 for
         T.ACT, T.RET, where T.ACT<-T1 and T1 is most recently used
      2) In case primary path T.PRI not in {T1, T2} but ACTIVE, set
         T.ACT<-T.PRI and T.RET<-T1
      3) If only T1 is ACTIVE from the set, set T.ACT<-T1 and T.RET<-T1
      4) If none is ACTIVE, set T.ACT<-best(T.PRI, T.RET, T3) where
         T3 is the most recently used (if avail) in PF, set T.RET<-T.PRI
      
      Prior to above commits, 4) was simply a camp on T.ACT<-T.PRI and
      T.RET<-T.PRI, ignoring possible paths in PF. Camping on T.PRI is
      still slightly suboptimal as it can lead to the following scenario:
      
      Setup:
              <A>                                <B>
          T1: p1p1 (10.0.10.10) <==>  .'`)  <==> p1p1 (10.0.10.12)  <= T.PRI
          T2: p1p2 (10.0.10.20) <==> (_ . ) <==> p1p2 (10.0.10.22)
      
          net.sctp.rto_min = 1000
          net.sctp.path_max_retrans = 2
          net.sctp.pf_retrans = 0
          net.sctp.hb_interval = 1000
      
      T.PRI is permanently down, T2 is put briefly into PF state (e.g. due to
      link flapping). Here, the first time transmission is sent over PF path
      T2 as it's the only non-INACTIVE path, but the retransmitted data-chunks
      are sent over the INACTIVE path T1 (T.PRI), which is not good.
      
      After the patch, it's choosing better transports in both cases by
      modifying step 4):
      
      4) If none is ACTIVE, set T.ACT_new<-best(T.ACT_old, T3) where T3 is
         the most recently used (if avail) in PF, set T.RET<-T.ACT_new
      
      This will still select a best possible path in PF if available (which
      can also include T.PRI/T.RET), and set both T.ACT/T.RET to it.
      
      In case sctp_assoc_control_transport() *just* put T.ACT_old into INACTIVE
      as it transitioned from ACTIVE->PF->INACTIVE and stays in INACTIVE just
      for a very short while before going back ACTIVE, it will guarantee that
      this path will be reselected for T.ACT/T.RET since T3 (PF) is not
      available.
      
      Previously, this was not possible, as we would only select between T.PRI
      and T.RET, and a possible T3 would be NULL due to the fact that we have
      just transitioned T3 in sctp_assoc_control_transport() from PF->INACTIVE
      and would select a suboptimal path when T.PRI/T.RET have worse properties.
      
      In the case that T.ACT_old permanently went to INACTIVE during this
      transition and there's no PF path available, plus T.PRI and T.RET are
      INACTIVE as well, we would now camp on T.ACT_old, but if everything is
      being INACTIVE there's really not much we can do except hoping for a
      successful HB to bring one of the transports back up again and, thus
      cause a new selection through sctp_assoc_control_transport().
      
      Now both tests work fine:
      
      Case 1:
      
       1. T1 S(ACTIVE) T.ACT
          T2 S(ACTIVE) T.RET
      
       2. T1 S(ACTIVE) T.ACT, T.RET
          T2 S(PF)
      
       3. T1 S(ACTIVE) T.ACT, T.RET
          T2 S(INACTIVE)
      
       5. T1 S(PF) T.ACT, T.RET
          T2 S(INACTIVE)
      
      [ 5.1 T1 S(INACTIVE) T.ACT, T.RET
            T2 S(INACTIVE) ]
      
       6. T1 S(ACTIVE) T.ACT, T.RET
          T2 S(INACTIVE)
      
       7. T1 S(ACTIVE) T.ACT
          T2 S(ACTIVE) T.RET
      
      Case 2:
      
       1. T1 S(ACTIVE) T.ACT
          T2 S(ACTIVE) T.RET
      
       2. T1 S(PF)
          T2 S(ACTIVE) T.ACT, T.RET
      
       3. T1 S(INACTIVE)
          T2 S(ACTIVE) T.ACT, T.RET
      
       5. T1 S(INACTIVE)
          T2 S(PF) T.ACT, T.RET
      
      [ 5.1 T1 S(INACTIVE)
            T2 S(INACTIVE) T.ACT, T.RET ]
      
       6. T1 S(INACTIVE)
          T2 S(ACTIVE) T.ACT, T.RET
      
       7. T1 S(ACTIVE) T.ACT
          T2 S(ACTIVE) T.RET
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Acked-by: default avatarVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aa4a83ee
    • Daniel Borkmann's avatar
      net: sctp: spare unnecessary comparison in sctp_trans_elect_best · ea4f19c1
      Daniel Borkmann authored
      When both transports are the same, we don't have to go down that
      road only to realize that we will return the very same transport.
      We are guaranteed that curr is always non-NULL. Therefore, just
      short-circuit this special case.
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Acked-by: default avatarVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ea4f19c1
    • Rasmus Villemoes's avatar
      net: ethernet: broadcom: bnx2x: Remove redundant #ifdef · 7d149c52
      Rasmus Villemoes authored
      Nothing defines _ASM_GENERIC_INT_L64_H, it is a weird way to check for
      64 bit longs, and u64 should be printed using %llx anyway.
      Signed-off-by: default avatarRasmus Villemoes <linux@rasmusvillemoes.dk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d149c52
    • Anton Blanchard's avatar
      ibmveth: Fix endian issues with rx_no_buffer statistic · cbd52281
      Anton Blanchard authored
      Hidden away in the last 8 bytes of the buffer_list page is a solitary
      statistic. It needs to be byte swapped or else ethtool -S will
      produce numbers that terrify the user.
      
      Since we do this in multiple places, create a helper function with a
      comment explaining what is going on.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cbd52281
    • Iyappan Subramanian's avatar
      net: xgene: fix possible NULL dereference in xgene_enet_free_desc_rings() · c10e4caf
      Iyappan Subramanian authored
      A NULL pointer dereference is possible for the argument ring->buf_pool
      which is passed to xgene_enet_free_desc_ring(), as ring could be NULL.
      
      And now since NULL pointers are being checked for before the calls to
      xgene_enet_free_desc_ring(), might as well take advantage of them and
      not call the function if the argument would be NULL.
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarIyappan Subramanian <isubramanian@apm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c10e4caf
    • Jiri Benc's avatar
      openvswitch: fix panic with multiple vlan headers · 2ba5af42
      Jiri Benc authored
      When there are multiple vlan headers present in a received frame, the first
      one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the
      skb beyond the VLAN TPID may be still non-linear, including the inner TCI
      and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it
      does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is
      executed, __pop_vlan_tci pulls the next vlan header into vlan_tci.
      
      This leads to two things:
      
      1. Part of the resulting ethernet header is in the non-linear part of the
         skb. When eth_type_trans is called later as the result of
         OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci
         is in fact accessing random data when it reads past the TPID.
      
      2. network_header points into the ethernet header instead of behind it.
         mac_len is set to a wrong value (10), too.
      Reported-by: default avatarYulong Pei <ypei@redhat.com>
      Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2ba5af42
    • Benjamin Block's avatar
      net: ipv6: fib: don't sleep inside atomic lock · 793c3b40
      Benjamin Block authored
      The function fib6_commit_metrics() allocates a piece of memory in mode
      GFP_KERNEL while holding an atomic lock from higher up in the stack, in
      the function __ip6_ins_rt(). This produces the following BUG:
      
      > BUG: sleeping function called from invalid context at mm/slub.c:1250
      > in_atomic(): 1, irqs_disabled(): 0, pid: 2909, name: dhcpcd
      > 2 locks held by dhcpcd/2909:
      >  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81978e67>] rtnl_lock+0x17/0x20
      >  #1:  (&tb->tb6_lock){++--+.}, at: [<ffffffff81a6951a>] ip6_route_add+0x65a/0x800
      > CPU: 1 PID: 2909 Comm: dhcpcd Not tainted 3.17.0-rc1 #1
      > Hardware name: ASUS All Series/Q87T, BIOS 0216 10/16/2013
      >  0000000000000008 ffff8800c8f13858 ffffffff81af135a 0000000000000000
      >  ffff880212202430 ffff8800c8f13878 ffffffff810f8d3a ffff880212202c98
      >  0000000000000010 ffff8800c8f138c8 ffffffff8121ad0e 0000000000000001
      > Call Trace:
      >  [<ffffffff81af135a>] dump_stack+0x4e/0x68
      >  [<ffffffff810f8d3a>] __might_sleep+0x10a/0x120
      >  [<ffffffff8121ad0e>] kmem_cache_alloc_trace+0x4e/0x190
      >  [<ffffffff81a6bcd6>] ? fib6_commit_metrics+0x66/0x110
      >  [<ffffffff81a6bcd6>] fib6_commit_metrics+0x66/0x110
      >  [<ffffffff81a6cbf3>] fib6_add+0x883/0xa80
      >  [<ffffffff81a6951a>] ? ip6_route_add+0x65a/0x800
      >  [<ffffffff81a69535>] ip6_route_add+0x675/0x800
      >  [<ffffffff81a68f2a>] ? ip6_route_add+0x6a/0x800
      >  [<ffffffff81a6990c>] inet6_rtm_newroute+0x5c/0x80
      >  [<ffffffff8197cf01>] rtnetlink_rcv_msg+0x211/0x260
      >  [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20
      >  [<ffffffff81119708>] ? lock_release_holdtime+0x28/0x180
      >  [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20
      >  [<ffffffff8197ccf0>] ? __rtnl_unlock+0x20/0x20
      >  [<ffffffff819a989e>] netlink_rcv_skb+0x6e/0xd0
      >  [<ffffffff81978ee5>] rtnetlink_rcv+0x25/0x40
      >  [<ffffffff819a8e59>] netlink_unicast+0xd9/0x180
      >  [<ffffffff819a9600>] netlink_sendmsg+0x700/0x770
      >  [<ffffffff81103735>] ? local_clock+0x25/0x30
      >  [<ffffffff8194e83c>] sock_sendmsg+0x6c/0x90
      >  [<ffffffff811f98e3>] ? might_fault+0xa3/0xb0
      >  [<ffffffff8195ca6d>] ? verify_iovec+0x7d/0xf0
      >  [<ffffffff8194ec3e>] ___sys_sendmsg+0x37e/0x3b0
      >  [<ffffffff8111ef15>] ? trace_hardirqs_on_caller+0x185/0x220
      >  [<ffffffff81af979e>] ? mutex_unlock+0xe/0x10
      >  [<ffffffff819a55ec>] ? netlink_insert+0xbc/0xe0
      >  [<ffffffff819a65e5>] ? netlink_autobind.isra.30+0x125/0x150
      >  [<ffffffff819a6520>] ? netlink_autobind.isra.30+0x60/0x150
      >  [<ffffffff819a84f9>] ? netlink_bind+0x159/0x230
      >  [<ffffffff811f989a>] ? might_fault+0x5a/0xb0
      >  [<ffffffff8194f25e>] ? SYSC_bind+0x7e/0xd0
      >  [<ffffffff8194f8cd>] __sys_sendmsg+0x4d/0x80
      >  [<ffffffff8194f912>] SyS_sendmsg+0x12/0x20
      >  [<ffffffff81afc692>] system_call_fastpath+0x16/0x1b
      
      Fixing this by replacing the mode GFP_KERNEL with GFP_ATOMIC.
      Signed-off-by: default avatarBenjamin Block <bebl@mageta.org>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      793c3b40
    • Nimrod Andy's avatar
      net: fec: ptp: avoid register access when ipg clock is disabled · 91c0d987
      Nimrod Andy authored
      The current kernel hang on i.MX6SX with rootfs mount from MMC.
      The root cause is that ptp uses a periodic timer to access enet register
      even if ipg clock is disabled.
      
      FEC ptp driver start one period timer to read 1588 counter register in the
      ptp init function that is called after FEC driver is probed.
      
      To save power, after FEC probe finish, FEC driver disable all clocks including
      ipg clock that is needed for register access.
      
      i.MX5x, i.MX6q/dl/sl FEC register access don't cause system hang when ipg clock
      is disabled, just return zero value. But for i.MX6sx SOC, it cause system hang.
      
      To avoid the issue, we need to check ptp clock status before ptp timer count access.
      Signed-off-by: default avatarFugang Duan <B38611@freescale.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91c0d987
    • Steven Rostedt (Red Hat)'s avatar
      ftrace: Update all ftrace_ops for a ftrace_hash_ops update · 84261912
      Steven Rostedt (Red Hat) authored
      When updating what an ftrace_ops traces, if it is registered (that is,
      actively tracing), and that ftrace_ops uses the shared global_ops
      local_hash, then we need to update all tracers that are active and
      also share the global_ops' ftrace_hash_ops.
      
      Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      84261912
    • Steven Rostedt (Red Hat)'s avatar
      ftrace: Allow ftrace_ops to use the hashes from other ops · 33b7f99c
      Steven Rostedt (Red Hat) authored
      Currently the top level debug file system function tracer shares its
      ftrace_ops with the function graph tracer. This was thought to be fine
      because the tracers are not used together, as one can only enable
      function or function_graph tracer in the current_tracer file.
      
      But that assumption proved to be incorrect. The function profiler
      can use the function graph tracer when function tracing is enabled.
      Since all function graph users uses the function tracing ftrace_ops
      this causes a conflict and when a user enables both function profiling
      as well as the function tracer it will crash ftrace and disable it.
      
      The quick solution so far is to move them as separate ftrace_ops like
      it was earlier. The problem though is to synchronize the functions that
      are traced because both function and function_graph tracer are limited
      by the selections made in the set_ftrace_filter and set_ftrace_notrace
      files.
      
      To handle this, a new structure is made called ftrace_ops_hash. This
      structure will now hold the filter_hash and notrace_hash, and the
      ftrace_ops will point to this structure. That will allow two ftrace_ops
      to share the same hashes.
      
      Since most ftrace_ops do not share the hashes, and to keep allocation
      simple, the ftrace_ops structure will include both a pointer to the
      ftrace_ops_hash called func_hash, as well as the structure itself,
      called local_hash. When the ops are registered, the func_hash pointer
      will be initialized to point to the local_hash within the ftrace_ops
      structure. Some of the ftrace internal ftrace_ops will be initialized
      statically. This will allow for the function and function_graph tracer
      to have separate ops but still share the same hash tables that determine
      what functions they trace.
      
      Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      33b7f99c
    • Linus Torvalds's avatar
      Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux · 26d189b8
      Linus Torvalds authored
      Pull arm64 fixes from Will Deacon:
       "This small set of fixes addresses a few issues introduced during the
        merge window, including:
      
         - fix typo in I-cache detection that was causing us to treat all
           I-caches as aliasing
         - hook up memfd_create and getrandom syscalls for native and compat
         - revert a temporary hack for defconfig builds in -next (the audit
           tree changes didn't make it in this merge window)
         - a couple of UEFI fixes for TEXT_OFFSET fuzzing and /memreserve/
         - a simple sparsemem fix for 48-bit physical addressing
         - small defconfig updates to get autotesters working with X-gene"
      
      * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
        Revert "arm64: Do not invoke audit_syscall_* functions if !CONFIG_AUDIT_SYSCALL"
        arm64: mm: update max pa bits to 48
        arm64: ignore DT memreserve entries when booting in UEFI mode
        arm64: configs: Enable X-Gene SATA and ethernet in defconfig
        arm64: align randomized TEXT_OFFSET on 4 kB boundary
        asm-generic: add memfd_create system call to unistd.h
        arm64: compat: wire up memfd_create and getrandom syscalls for aarch32
        arm64: fix typo in I-cache policy detection
      26d189b8
    • Linus Torvalds's avatar
      Merge tag 'iommu-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu · 1ae45cf0
      Linus Torvalds authored
      Pull IOMMU fixes from Joerg Roedel:
       "The fixes include:
      
         - fix a crash in the VT-d driver when devices with a driver attached
           are hot-unplugged
      
         - fix a AMD IOMMU driver crash with device assignment of 32 bit PCI
           devices to KVM guests
      
         - fix for a copy&paste error in generic IOMMU code.  Now the right
           function pointer is checked before calling"
      
      * tag 'iommu-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
        iommu/core: Check for the right function pointer in iommu_map()
        iommu/amd: Fix cleanup_domain for mass device removal
        iommu/vt-d: Defer domain removal if device is assigned to a driver
      1ae45cf0
    • Alex Deucher's avatar
      drm/radeon: add additional SI pci ids · 37dbeab7
      Alex Deucher authored
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Cc: stable@vger.kernel.org
      37dbeab7
    • Alex Deucher's avatar
      drm/radeon: add new bonaire pci ids · 5fc540ed
      Alex Deucher authored
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Cc: stable@vger.kernel.org
      5fc540ed
    • Alex Deucher's avatar
      drm/radeon: add new KV pci id · 6dc14baf
      Alex Deucher authored
      bug:
      https://bugs.freedesktop.org/show_bug.cgi?id=82912Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Cc: stable@vger.kernel.org
      6dc14baf