- 16 Jan, 2018 1 commit
-
-
Arnd Bergmann authored
Some older compilers (gcc-4.4 through 4.6 in particular) struggle with the way that blkg_rwstat_read() returns a structure, leading to excessive stack usage and rather inefficient code: block/blk-cgroup.c: In function 'blkg_destroy': block/blk-cgroup.c:354:1: error: the frame size of 1296 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] block/cfq-iosched.c: In function 'cfqg_stats_add_aux': block/cfq-iosched.c:753:1: error: the frame size of 1928 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] block/bfq-cgroup.c: In function 'bfqg_stats_add_aux': block/bfq-cgroup.c:299:1: error: the frame size of 1928 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] I also notice that there is no point in using atomic accesses for the local variables, so storing the temporaries in simple 'u64' variables not only avoids the stack usage on older compilers but also improves the object code on modern versions. Fixes: e6269c44 ("blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it") Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 15 Jan, 2018 5 commits
-
-
Mike Snitzer authored
DM is no longer prone to having its request_queue be improperly initialized. Summary of changes: - defer DM's blk_register_queue() from add_disk()-time until dm_setup_md_queue() by using add_disk_no_queue_reg() in alloc_dev(). - dm_setup_md_queue() is updated to fully initialize DM's request_queue (_after_ all table loads have occurred and the request_queue's type, features and limits are known). A very welcome side-effect of these changes is DM no longer needs to: 1) backfill the "mq" sysfs entry (because historically DM didn't initialize the request_queue to use blk-mq until _after_ blk_register_queue() was called via add_disk()). 2) call elv_register_queue() to get .request_fn request-based DM device's "iosched" exposed in syfs. In addition, blk-mq debugfs support is now made available because request-based DM's blk-mq request_queue is now properly initialized before dm_setup_md_queue() calls blk_register_queue(). These changes also stave off the need to introduce new DM-specific workarounds in block core, e.g. this proposal: https://patchwork.kernel.org/patch/10067961/ In the end DM devices should be less unicorn in nature (relative to initialization and availability of block core infrastructure provided by the request_queue). Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Douglas Gilbert authored
During stress tests by syzkaller on the sg driver the block layer infrequently returns EINVAL. Closer inspection shows the block layer was trying to return ENOMEM (which is much more understandable) but for some reason overroad that useful error. Patch below does not show this (unchanged) line: ret =__blk_rq_map_user_iov(rq, map_data, &i, gfp_mask, copy); That 'ret' was being overridden when that function failed. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Mike Snitzer authored
Since I can remember DM has forced the block layer to allow the allocation and initialization of the request_queue to be distinct operations. Reason for this is block/genhd.c:add_disk() has requires that the request_queue (and associated bdi) be tied to the gendisk before add_disk() is called -- because add_disk() also deals with exposing the request_queue via blk_register_queue(). DM's dynamic creation of arbitrary device types (and associated request_queue types) requires the DM device's gendisk be available so that DM table loads can establish a master/slave relationship with subordinate devices that are referenced by loaded DM tables -- using bd_link_disk_holder(). But until these DM tables, and their associated subordinate devices, are known DM cannot know what type of request_queue it needs -- nor what its queue_limits should be. This chicken and egg scenario has created all manner of problems for DM and, at times, the block layer. Summary of changes: - Add device_add_disk_no_queue_reg() and add_disk_no_queue_reg() variant that drivers may use to add a disk without also calling blk_register_queue(). Driver must call blk_register_queue() once its request_queue is fully initialized. - Return early from blk_unregister_queue() if QUEUE_FLAG_REGISTERED is not set. It won't be set if driver used add_disk_no_queue_reg() but driver encounters an error and must del_gendisk() before calling blk_register_queue(). - Export blk_register_queue(). These changes allow DM to use add_disk_no_queue_reg() to anchor its gendisk as the "master" for master/slave relationships DM must establish with subordinate devices referenced in DM tables that get loaded. Once all "slave" devices for a DM device are known its request_queue can be properly initialized and then advertised via sysfs -- important improvement being that no request_queue resource initialization performed by blk_register_queue() is missed for DM devices anymore. Signed-off-by:
-
Mike Snitzer authored
The original commit e9a823fb (block: fix warning when I/O elevator is changed as request_queue is being removed) is pretty conflated. "conflated" because the resource being protected by q->sysfs_lock isn't the queue_flags (it is the 'queue' kobj). q->sysfs_lock serializes __elevator_change() (via elv_iosched_store) from racing with blk_unregister_queue(): 1) By holding q->sysfs_lock first, __elevator_change() can complete before a racing blk_unregister_queue(). 2) Conversely, __elevator_change() is testing for QUEUE_FLAG_REGISTERED in case elv_iosched_store() loses the race with blk_unregister_queue(), it needs a way to know the 'queue' kobj isn't there. Expand the scope of blk_unregister_queue()'s q->sysfs_lock use so it is held until after the 'queue' kobj is removed. To do so blk_mq_unregister_dev() must not also take q->sysfs_lock. So rename __blk_mq_unregister_dev() to blk_mq_unregister_dev(). Also, blk_unregister_queue() should use q->queue_lock to protect against any concurrent writes to q->queue_flags -- even though chances are the queue is being cleaned up so no concurrent writes are likely. Fixes: e9a823fb ("block: fix warning when I/O elevator is changed as request_queue is being removed") Signed-off-by:
-
Mike Snitzer authored
device_add_disk() will only call bdi_register_owner() if !GENHD_FL_HIDDEN, so it follows that del_gendisk() should only call bdi_unregister() if !GENHD_FL_HIDDEN. Found with code inspection. bdi_unregister() won't do any harm if bdi_register_owner() wasn't used but best to avoid the unnecessary call to bdi_unregister(). Fixes: 8ddcd653 ("block: introduce GENHD_FL_HIDDEN") Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
- 14 Jan, 2018 1 commit
-
-
Jens Axboe authored
A previous commit moved the clearing of rq->rq_flags later, but we may have already set RQF_MQ_INFLIGHT when that happens. Ensure that we correctly initialize rq->rq_flags to the right value. This is based on an original fix by Ming, just rewritten to not require a conditional. Fixes: 7c3fb70f ("block: rearrange a few request fields for better cache layout") Reviewed-by:
-
- 12 Jan, 2018 3 commits
-
-
Jens Axboe authored
Looking at debug output, we see: ./000000009ddfa913/requeue_list:000000009646711c {.op=READ, .state=idle, gen=0x1 18, abort_gen=0x0, .cmd_flags=, .rq_flags=SORTED|1|SOFTBARRIER|IO_STAT, complete =0, .tag=-1, .internal_tag=217} Note the '1' between SORTED and SOFTBARRIER - that's because no name as defined for RQF_STARTED. Fixed that. Signed-off-by: -
Christoph Hellwig authored
The previous patch assigns interrupt vectors to all possible CPUs, so now hctx can be mapped to possible CPUs, this patch applies this fact to simplify queue mapping & schedule so that we don't need to handle CPU hotplug for dealing with physical CPU plug & unplug. With this simplication, we can work well on physical CPU plug & unplug, which is a normal use case for VM at least. Make sure we allocate blk_mq_ctx structures for all possible CPUs, and set hctx->numa_node for possible CPUs which are mapped to this hctx. And only choose the online CPUs for schedule. Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Tested-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Fixes: 4b855ad3 ("blk-mq: Create hctx for each present CPU") (merged the three into one because any single one may not work, and fix selecting online CPUs for scheduler) Signed-off-by:
-
Christoph Hellwig authored
Currently we assign managed interrupt vectors to all present CPUs. This works fine for systems were we only online/offline CPUs. But in case of systems that support physical CPU hotplug (or the virtualized version of it) this means the additional CPUs covered for in the ACPI tables or on the command line are not catered for. To fix this we'd either need to introduce new hotplug CPU states just for this case, or we can start assining vectors to possible but not present CPUs. Reported-by:
-
- 11 Jan, 2018 2 commits
-
-
Bart Van Assche authored
This patch does not change any functionality but makes the blk_mq_mark_tag_wait() code slightly easier to read. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Arnd Bergmann authored
Selecting FAULT_INJECTION causes a Kconfig warning when CONFIG_DEBUG_KERNEL is not set: warning: (BLK_DEV_NULL_BLK && DRM_I915_SELFTEST) selects FAULT_INJECTION which has unmet direct dependencies (DEBUG_KERNEL) The other drivers that use FAULT_INJECTION tend to have a separate Kconfig symbol for turning on that feature, so let's do the same thing here. This may add a bit more complexity than we like, but it avoids the warning and is more consistent with the rest of the kernel. Fixes: 93b57046 ("null_blk: add option for managing IO timeouts") Signed-off-by:
-
- 10 Jan, 2018 17 commits
-
-
Bart Van Assche authored
This patch avoids that sparse reports the following: block/blk-mq.c:637:33: warning: context imbalance in 'hctx_unlock' - unexpected unlock block/blk-mq.c:642:9: warning: context imbalance in 'hctx_lock' - wrong count at exit Signed-off-by:
-
Paolo Bonzini authored
After the first few months, the message has not led to many bug reports. It's been almost five years now, and in practice the main source of it seems to be MTIOCGET that someone is using to detect tape devices. While we could whitelist it just like CDROM_GET_CAPABILITY, this patch just removes the message altogether. The patch also removes the "safe but not very useful" ioctl whitelist, as suggested by Christoph. I doubt anything is using most of those ioctls _in general_, let alone on a partition. Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jens Axboe authored
Move completion related items (like the call single data) near the end of the struct, instead of mixing them in with the initial queueing related fields. Move queuelist below the bio structures. Then we have all queueing related bits in the first cache line. This yields a 1.5-2% increase in IOPS for a null_blk test, both for sync and for high thread count access. Sync test goes form 975K to 992K, 32-thread case from 20.8M to 21.2M IOPS. Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Jens Axboe authored
We only have one atomic flag left. Instead of using an entire unsigned long for that, steal the bottom bit of the deadline field that we already reserved. Remove ->atomic_flags, since it's now unused. Reviewed-by:
-
Jens Axboe authored
We reduce the resolution of request expiry, but since we're already using jiffies for this where resolution depends on the kernel configuration and since the timeout resolution is coarse anyway, that should be fine. Reviewed-by:
-
Jens Axboe authored
We don't need this to be an atomic flag, it can be a regular flag. We either end up on the same CPU for the polling, in which case the state is sane, or we did the sleep which would imply the needed barrier to ensure we see the right state. Reviewed-by:
-
Jens Axboe authored
We are missing ZONE_WRITE_LOCKED and MQ_TIMEOUT_EXPIRED, add them so the debugfs bits can decode them. Signed-off-by: -
Keith Busch authored
Uses common code for determining if an error should be retried on alternate path. Acked-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
Keith Busch authored
Uses common code for determining if an error should be retried on alternate path. Acked-by:
-
Keith Busch authored
This patch provides a common decoder for block status path related errors that may be retried so various entities wishing to consult this do not have to duplicate this decision. Acked-by:
-
Keith Busch authored
This removes nvme multipath's specific status decoding to see if failover is needed, using the generic blk_status_t that was decoded earlier. This abstraction from the raw NVMe status means all status decoding exists in one place. Acked-by:
-
Keith Busch authored
This adds more NVMe status code translations to blk_status_t values, and captures all the current status codes NVMe multipath uses. Acked-by:
-
Bart Van Assche authored
It is nontrivial to derive from the blk-mq source code when blk_mq_tags.active_queues is decremented. Hence add a comment that explains this. Signed-off-by:
-
Richard Narron authored
UFS partitions from newer versions of FreeBSD 10 and 11 use relative addressing for their subpartitions. But older versions of FreeBSD still use absolute addressing just like OpenBSD and NetBSD. Instead of simply testing for a FreeBSD partition, the code needs to also test if the starting offset of the C subpartition is zero. https://bugzilla.kernel.org/show_bug.cgi?id=197733Signed-off-by:
Richard Narron <comet.berkeley@gmail.com> Signed-off-by:
-
Jens Axboe authored
Use the fault injection framework to provide a way for null_blk to configure timeouts. This only works for queue_mode 1 and 2, since the bio mode doesn't have code for tracking timeouts. Let's say you want to have a 10% chance of timing out every 100,000 requests, and for 5 total timeouts, you could do: modprobe null_blk timeout="100000,10,0,5" This is useful for adding blktests to test that IO timeouts are handled appropriately. Signed-off-by: -
Chiara Bruschi authored
Commit '7b9e9361' ("blk-mq-sched: unify request finished methods") changed the old name of current bfq_finish_request method, but left it unchanged elsewhere in the code (related comments, part of function name bfq_put_rq_priv_body). This commit fixes all occurrences of the old name of this method by changing them into the current name. Fixes: 7b9e9361 ("blk-mq-sched: unify request finished methods") Reviewed-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Federico Motta <federico@willer.it> Signed-off-by:
Chiara Bruschi <bruschi.chiara@outlook.it> Signed-off-by:
-
Ming Lei authored
This reverts commit a2d37968. If max segment size isn't 512-aligned, this patch won't work well. Also once multipage bvec is enabled, adjacent bvecs won't be physically contiguous if page is added via bio_add_page(), so we don't need this kind of complicated logic. Reported-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
- 09 Jan, 2018 11 commits
-
-
Jens Axboe authored
This is needed to ensure that we actually handle timeouts. Without it, the queue_mode=1 path will never call blk_add_timer(), and the queue_mode=2 path will continually just return EH_RESET_TIMER and we never actually complete the offending request. This was used to test the new timeout code, and the changes around killing off REQ_ATOM_COMPLETE. Signed-off-by: -
Jens Axboe authored
It's not available if we don't have group io scheduling set, and there's no need to call it. Fixes: 0d52af59 ("block, bfq: release oom-queue ref to root group on exit") Signed-off-by:
-
Michael Lyle authored
Otherwise, architectures that do negated adds of atomics (e.g. s390) to do atomic_sub fail in closure_set_stopped. Signed-off-by:
Michael Lyle <mlyle@lyle.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Bart Van Assche authored
Commit 3a025e1d ("Add optional check for bad kernel-doc comments") causes W=1 the kernel-doc script to be run and thereby causes several new warnings to appear when building the kernel with W=1. Fix the block layer kernel-doc headers such that the block layer again builds cleanly with W=1. Signed-off-by:
-
Bart Van Assche authored
Change "nedeing" into "needing" and "caes" into "cases". Fixes: commit f906a6a0 ("blk-mq: improve tag waiting setup for non-shared tags") Signed-off-by:
-
Jens Axboe authored
In some stupider versions of gcc, it complains: block/blk-mq.c: In function ‘blk_mq_complete_request’: ./include/linux/srcu.h:175:2: warning: ‘srcu_idx’ may be used uninitialized in this function [-Wmaybe-uninitialized] __srcu_read_unlock(sp, idx); ^ block/blk-mq.c:620:6: note: ‘srcu_idx’ was declared here int srcu_idx; ^ which is completely bogus, since we only use srcu_idx when hctx->flags & BLK_MQ_F_BLOCKING is set, and that's the case where hctx_lock() has initialized it. Just set it to '0' in the normal path in hctx_lock() to silence this annoying warning. Fixes: 04ced159 ("blk-mq: move hctx lock/unlock into a helper") Fixes: 5197c05e ("blk-mq: protect completion path with RCU") Signed-off-by: -
Tejun Heo authored
The RCU protection has been expanded to cover both queueing and completion paths making ->queue_rq_srcu a misnomer. Rename it to ->srcu as suggested by Bart. Signed-off-by:
-
Tejun Heo authored
After the recent updates to use generation number and state based synchronization, we can easily replace REQ_ATOM_STARTED usages by adding an extra state to distinguish completed but not yet freed state. Add MQ_RQ_COMPLETE and replace REQ_ATOM_STARTED usages with blk_mq_rq_state() tests. REQ_ATOM_STARTED no longer has any users left and is removed. Signed-off-by:
-
Tejun Heo authored
After the recent updates to use generation number and state based synchronization, blk-mq no longer depends on REQ_ATOM_COMPLETE except to avoid firing the same timeout multiple times. Remove all REQ_ATOM_COMPLETE usages and use a new rq_flags flag RQF_MQ_TIMEOUT_EXPIRED to avoid firing the same timeout multiple times. This removes atomic bitops from hot paths too. v2: Removed blk_clear_rq_complete() from blk_mq_rq_timed_out(). v3: Added RQF_MQ_TIMEOUT_EXPIRED flag. Signed-off-by:
-
Tejun Heo authored
With issue/complete and timeout paths now using the generation number and state based synchronization, blk_abort_request() is the only one which depends on REQ_ATOM_COMPLETE for arbitrating completion. There's no reason for blk_abort_request() to be a completely separate path. This patch makes blk_abort_request() piggyback on the timeout path instead of trying to terminate the request directly. This removes the last dependency on REQ_ATOM_COMPLETE in blk-mq. Note that this makes blk_abort_request() asynchronous - it initiates abortion but the actual termination will happen after a short while, even when the caller owns the request. AFAICS, SCSI and ATA should be fine with that and I think mtip32xx and dasd should be safe but not completely sure. It'd be great if people who know the drivers take a look. v2: - Add comment explaining the lack of synchronization around ->deadline update as requested by Bart. Signed-off-by: -
Tejun Heo authored
blk_mq_check_inflight() and blk_mq_poll_hybrid_sleep() test REQ_ATOM_COMPLETE to determine the request state. Both uses are speculative and we can test REQ_ATOM_STARTED and blk_mq_rq_state() for equivalent results. Replace the tests. This will allow removing REQ_ATOM_COMPLETE usages from blk-mq. Signed-off-by:
-
