- 22 Oct, 2016 40 commits
-
-
Eric Whitney authored
commit 14fbd4aa upstream. Online defragging of encrypted files is not currently implemented. However, the move extent ioctl can still return successfully when called. For example, this occurs when xfstest ext4/020 is run on an encrypted file system, resulting in a corrupted test file and a corresponding test failure. Until the proper functionality is implemented, fail the move extent ioctl if either the original or donor file is encrypted. Signed-off-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit e03a9976 upstream. Thomas has reported a lockdep splat hitting in add_transaction_credits(). The problem is that that function calls jbd2_might_wait_for_commit() while holding j_state_lock which is wrong (we do not really wait for transaction commit while holding that lock). Fix the problem by moving jbd2_might_wait_for_commit() into places where we are ready to wait for transaction commit and thus j_state_lock is unlocked. Fixes: 1eaa566dReported-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Wei Fang authored
commit c2a9737f upstream. We triggered a deadloop in truncate_inode_pages_range() on 32 bits architecture with the test case bellow: ... fd = open(); write(fd, buf, 4096); preadv64(fd, &iovec, 1, 0xffffffff000); ftruncate(fd, 0); ... Then ftruncate() will not return forever. The filesystem used in this case is ubifs, but it can be triggered on many other filesystems. When preadv64() is called with offset=0xffffffff000, a page with index=0xffffffff will be added to the radix tree of ->mapping. Then this page can be found in ->mapping with pagevec_lookup(). After that, truncate_inode_pages_range(), which is called in ftruncate(), will fall into an infinite loop: - find a page with index=0xffffffff, since index>=end, this page won't be truncated - index++, and index become 0 - the page with index=0xffffffff will be found again The data type of index is unsigned long, so index won't overflow to 0 on 64 bits architecture in this case, and the dead loop won't happen. Since truncate_inode_pages_range() is executed with holding lock of inode->i_rwsem, any operation related with this lock will be blocked, and a hung task will happen, e.g.: INFO: task truncate_test:3364 blocked for more than 120 seconds. ... call_rwsem_down_write_failed+0x17/0x30 generic_file_write_iter+0x32/0x1c0 ubifs_write_iter+0xcc/0x170 __vfs_write+0xc4/0x120 vfs_write+0xb2/0x1b0 SyS_write+0x46/0xa0 The page with index=0xffffffff added to ->mapping is useless. Fix this by checking the read position before allocating pages. Link: http://lkml.kernel.org/r/1475151010-40166-1-git-send-email-fangwei1@huawei.comSigned-off-by:
Wei Fang <fangwei1@huawei.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Gerald Schaefer authored
commit 2247bb33 upstream. Patch series "mm/hugetlb: memory offline issues with hugepages", v4. This addresses several issues with hugepages and memory offline. While the first patch fixes a panic, and is therefore rather important, the last patch is just a performance optimization. The second patch fixes a theoretical issue with reserved hugepages, while still leaving some ugly usability issue, see description. This patch (of 3): dissolve_free_huge_pages() will either run into the VM_BUG_ON() or a list corruption and addressing exception when trying to set a memory block offline that is part (but not the first part) of a "gigantic" hugetlb page with a size > memory block size. When no other smaller hugetlb page sizes are present, the VM_BUG_ON() will trigger directly. In the other case we will run into an addressing exception later, because dissolve_free_huge_page() will not work on the head page of the compound hugetlb page which will result in a NULL hstate from page_hstate(). To fix this, first remove the VM_BUG_ON() because it is wrong, and then use the compound head page in dissolve_free_huge_page(). This means that an unused pre-allocated gigantic page that has any part of itself inside the memory block that is going offline will be dissolved completely. Losing an unused gigantic hugepage is preferable to failing the memory offline, for example in the situation where a (possibly faulty) memory DIMM needs to go offline. Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Link: http://lkml.kernel.org/r/20160926172811.94033-2-gerald.schaefer@de.ibm.comSigned-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rui Teng <rui.teng@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Manfred Spraul authored
commit 5864a2fd upstream. Commit 6d07b68c ("ipc/sem.c: optimize sem_lock()") introduced a race: sem_lock has a fast path that allows parallel simple operations. There are two reasons why a simple operation cannot run in parallel: - a non-simple operations is ongoing (sma->sem_perm.lock held) - a complex operation is sleeping (sma->complex_count != 0) As both facts are stored independently, a thread can bypass the current checks by sleeping in the right positions. See below for more details (or kernel bugzilla 105651). The patch fixes that by creating one variable (complex_mode) that tracks both reasons why parallel operations are not possible. The patch also updates stale documentation regarding the locking. With regards to stable kernels: The patch is required for all kernels that include the commit 6d07b68c ("ipc/sem.c: optimize sem_lock()") (3.10?) The alternative is to revert the patch that introduced the race. The patch is safe for backporting, i.e. it makes no assumptions about memory barriers in spin_unlock_wait(). Background: Here is the race of the current implementation: Thread A: (simple op) - does the first "sma->complex_count == 0" test Thread B: (complex op) - does sem_lock(): This includes an array scan. But the scan can't find Thread A, because Thread A does not own sem->lock yet. - the thread does the operation, increases complex_count, drops sem_lock, sleeps Thread A: - spin_lock(&sem->lock), spin_is_locked(sma->sem_perm.lock) - sleeps before the complex_count test Thread C: (complex op) - does sem_lock (no array scan, complex_count==1) - wakes up Thread B. - decrements complex_count Thread A: - does the complex_count test Bug: Now both thread A and thread C operate on the same array, without any synchronization. Fixes: 6d07b68c ("ipc/sem.c: optimize sem_lock()") Link: http://lkml.kernel.org/r/1469123695-5661-1-git-send-email-manfred@colorfullife.com Reported-by: <felixh@informatik.uni-bremen.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: <1vier1@web.de> Signed-off-by:
-
Brian King authored
commit 07d0e9a8 upstream. If a VFC port gets unmapped in the VIOS, it may not respond with a CRQ init complete following H_REG_CRQ. If this occurs, we can end up having called scsi_block_requests and not a resulting unblock until the init complete happens, which may never occur, and we end up hanging I/O requests. This patch ensures the host action stay set to IBMVFC_HOST_ACTION_TGT_DEL so we move all rports into devloss state and unblock unless we receive an init complete. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Borislav Petkov authored
commit 4bd173c3 upstream. Do the user_len check first and then the ver_addr allocation so that we can save us the kfree() on the error path when user_len is > ARCMSR_API_DATA_BUFLEN. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Marco Grassi <marco.gra@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Tomas Henzl <thenzl@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit 7bc2b55a upstream. We need to put an upper bound on "user_len" so the memcpy() doesn't overflow. Reported-by:
Marco Grassi <marco.gra@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Eric W. Biederman authored
commit 069d5ac9 upstream. Seth Forshee reports that in 4.8-rcN some automounts are failing because the requesting the automount changed. The relevant call path is: follow_automount() ->d_automount autofs4_d_automount autofs4_mount_wait autofs4_wait In autofs4_wait wq_uid and wq_gid are set to current_uid() and current_gid respectively. With follow_automount now overriding creds uid that we export to userspace changes and that breaks existing setups. To remove the regression set wq_uid and wq_gid from current_real_cred()->uid and current_real_cred()->gid respectively. This restores the current behavior as current->real_cred is identical to current->cred except when override creds are used. Fixes: aeaa4a79 ("fs: Call d_automount with the filesystems creds") Reported-by:
Seth Forshee <seth.forshee@canonical.com> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Justin Maggard authored
commit c8475090 upstream. Add missing dmaengine_unmap_put(), so we don't OOM during RAID6 sync. Fixes: 1786b943 ("async_pq_val: convert to dmaengine_unmap_data") Signed-off-by:
Justin Maggard <jmaggard@netgear.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Mike Galbraith authored
commit 420902c9 upstream. If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can deadlock our own worker - mount blocks kworker/3:2, sleeps forever more. crash> ps|grep UN 715 2 3 ffff880220734d30 UN 0.0 0 0 [kworker/3:2] 9369 9341 2 ffff88021ffb7560 UN 1.3 493404 123184 Xorg 9665 9664 3 ffff880225b92ab0 UN 0.0 47368 812 udisks-daemon 10635 10403 3 ffff880222f22c70 UN 0.0 14904 936 mount crash> bt ffff880220734d30 PID: 715 TASK: ffff880220734d30 CPU: 3 COMMAND: "kworker/3:2" #0 [ffff8802244c3c20] schedule at ffffffff8144584b #1 [ffff8802244c3cc8] __rt_mutex_slowlock at ffffffff814472b3 #2 [ffff8802244c3d28] rt_mutex_slowlock at ffffffff814473f5 #3 [ffff8802244c3dc8] reiserfs_write_lock at ffffffffa05f28fd [reiserfs] #4 [ffff8802244c3de8] flush_async_commits at ffffffffa05ec91d [reiserfs] #5 [ffff8802244c3e08] process_one_work at ffffffff81073726 #6 [ffff8802244c3e68] worker_thread at ffffffff81073eba #7 [ffff8802244c3ec8] kthread at ffffffff810782e0 #8 [ffff8802244c3f48] kernel_thread_helper at ffffffff81450064 crash> rd ffff8802244c3cc8 10 ffff8802244c3cc8: ffffffff814472b3 ffff880222f23250 .rD.....P2.".... ffff8802244c3cd8: 0000000000000000 0000000000000286 ................ ffff8802244c3ce8: ffff8802244c3d30 ffff880220734d80 0=L$.....Ms .... ffff8802244c3cf8: ffff880222e8f628 0000000000000000 (.."............ ffff8802244c3d08: 0000000000000000 0000000000000002 ................ crash> struct rt_mutex ffff880222e8f628 struct rt_mutex { wait_lock = { raw_lock = { slock = 65537 } }, wait_list = { node_list = { next = 0xffff8802244c3d48, prev = 0xffff8802244c3d48 } }, owner = 0xffff880222f22c71, save_state = 0 } crash> bt 0xffff880222f22c70 PID: 10635 TASK: ffff880222f22c70 CPU: 3 COMMAND: "mount" #0 [ffff8802216a9868] schedule at ffffffff8144584b #1 [ffff8802216a9910] schedule_timeout at ffffffff81446865 #2 [ffff8802216a99a0] wait_for_common at ffffffff81445f74 #3 [ffff8802216a9a30] flush_work at ffffffff810712d3 #4 [ffff8802216a9ab0] schedule_on_each_cpu at ffffffff81074463 #5 [ffff8802216a9ae0] invalidate_bdev at ffffffff81178aba #6 [ffff8802216a9af0] vfs_load_quota_inode at ffffffff811a3632 #7 [ffff8802216a9b50] dquot_quota_on_mount at ffffffff811a375c #8 [ffff8802216a9b80] finish_unfinished at ffffffffa05dd8b0 [reiserfs] #9 [ffff8802216a9cc0] reiserfs_fill_super at ffffffffa05de825 [reiserfs] RIP: 00007f7b9303997a RSP: 00007ffff443c7a8 RFLAGS: 00010202 RAX: 00000000000000a5 RBX: ffffffff8144ef12 RCX: 00007f7b932e9ee0 RDX: 00007f7b93d9a400 RSI: 00007f7b93d9a3e0 RDI: 00007f7b93d9a3c0 RBP: 00007f7b93d9a2c0 R8: 00007f7b93d9a550 R9: 0000000000000001 R10: ffffffffc0ed040e R11: 0000000000000202 R12: 000000000000040e R13: 0000000000000000 R14: 00000000c0ed040e R15: 00007ffff443ca20 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b Signed-off-by:
Mike Galbraith <efault@gmx.de> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
Mike Galbraith <mgalbraith@suse.de> Signed-off-by:
-
Nicolas Iooss authored
commit 61ab0d40 upstream. In sst_prepare_and_post_msg(), when a response is received in "block", the following code gets executed: *data = kzalloc(block->size, GFP_KERNEL); memcpy(data, (void *) block->data, block->size); The memcpy() call overwrites the content of the *data pointer instead of filling the newly-allocated memory (which pointer is hold by *data). Fix this by merging kzalloc+memcpy into a single kmemdup() call. Thanks Joe Perches for suggesting using kmemdup() Fixes: 60dc8dba ("ASoC: Intel: sst: Add some helper functions") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
John Hsu authored
commit a8961cae upstream. In the FLL parameter calculation, the FVCO should choose the maximum one. The patch is to fix the bug about the wrong FVCO chosen. Signed-off-by:
John Hsu <KCHSU0@nuvoton.com> Signed-off-by:
-
Rafał Miłecki authored
commit 7f00ee2b upstream. Flowrings contain skbs waiting for transmission that were passed to us by netif. It means we checked every one of them looking for 802.1x Ethernet type. When deleting flowring we have to use freeing function that will check for 802.1x type as well. Freeing skbs without a proper check was leading to counter not being properly decreased. This was triggering a WARNING every time brcmf_netdev_wait_pend8021x was called. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Rafał Miłecki authored
commit 23e9c128 upstream. This function is called from get_station callback which means that every time user space was getting/dumping station(s) we were leaking 2 KiB. Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Nicolas Iooss authored
commit 7703773e upstream. The struct cfg80211_pmksa defines its bssid field as: const u8 *bssid; contrary to struct brcmf_pmksa, which uses: u8 bssid[ETH_ALEN]; Therefore in brcmf_cfg80211_del_pmksa(), &pmksa->bssid takes the address of this field (of type u8**), not the one of its content (which would be u8*). Remove the & operator to make brcmf_dbg("%pM") and memcmp() behave as expected. This bug have been found using a custom static checker (which checks the usage of %p... attributes at build time). It has been introduced in commit 6c404f34 ("brcmfmac: Cleanup pmksa cache handling code"), which replaced pmksa->bssid by &pmksa->bssid while refactoring the code, without modifying struct cfg80211_pmksa definition. Replace &pmk[i].bssid with pmk[i].bssid too to make the code clearer, this change does not affect the semantic. Fixes: 6c404f34 ("brcmfmac: Cleanup pmksa cache handling code") Signed-off-by:
-
Johannes Weiner authored
commit d3798ae8 upstream. When the underflow checks were added to workingset_node_shadow_dec(), they triggered immediately: kernel BUG at ./include/linux/swap.h:276! invalid opcode: 0000 [#1] SMP Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6 soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60b #1 Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016 task: ffff8faa93ecd940 task.stack: ffff8faa7f478000 RIP: page_cache_tree_insert+0xf1/0x100 Call Trace: __add_to_page_cache_locked+0x12e/0x270 add_to_page_cache_lru+0x4e/0xe0 mpage_readpages+0x112/0x1d0 blkdev_readpages+0x1d/0x20 __do_page_cache_readahead+0x1ad/0x290 force_page_cache_readahead+0xaa/0x100 page_cache_sync_readahead+0x3f/0x50 generic_file_read_iter+0x5af/0x740 blkdev_read_iter+0x35/0x40 __vfs_read+0xe1/0x130 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x13/0x8f Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00 RIP page_cache_tree_insert+0xf1/0x100 This is a long-standing bug in the way shadow entries are accounted in the radix tree nodes. The shrinker needs to know when radix tree nodes contain only shadow entries, no pages, so node->count is split in half to count shadows in the upper bits and pages in the lower bits. Unfortunately, the radix tree implementation doesn't know of this and assumes all entries are in node->count. When there is a shadow entry directly in root->rnode and the tree is later extended, the radix tree implementation will copy that entry into the new node and and bump its node->count, i.e. increases the page count bits. Once the shadow gets removed and we subtract from the upper counter, node->count underflows and triggers the warning. Afterwards, without node->count reaching 0 again, the radix tree node is leaked. Limit shadow entries to when we have actual radix tree nodes and can count them properly. That means we lose the ability to detect refaults from files that had only the first page faulted in at eviction time. Fixes: 449dd698 ("mm: keep page cache radix tree nodes in check") Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-and-tested-by:
-
Dave Chinner authored
commit 541d48f0 upstream. oss.sgi.com is going away, move contact details over to vger. Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Guilherme G Piccoli authored
commit edfc23ee upstream. Although rare, it's possible to hit PCI error early on device probe, meaning possibly some structs are not entirely initialized, and some might even be completely uninitialized, leading to NULL pointer dereference. The i40e driver currently presents a "bad" behavior if device hits such early PCI error: firstly, the struct i40e_pf might not be attached to pci_dev yet, leading to a NULL pointer dereference on access to pf->state. Even checking if the struct is NULL and avoiding the access in that case isn't enough, since the driver cannot recover from PCI error that early; in our experiments we saw multiple failures on kernel log, like: [549.664] i40e 0007:01:00.1: Initial pf_reset failed: -15 [549.664] i40e: probe of 0007:01:00.1 failed with error -15 [...] [871.644] i40e 0007:01:00.1: The driver for the device stopped because the device firmware failed to init. Try updating your NVM image. [871.644] i40e: probe of 0007:01:00.1 failed with error -32 [...] [872.516] i40e 0007:01:00.0: ARQ: Unknown event 0x0000 ignored Between the first probe failure (error -15) and the second (error -32) another PCI error happened due to the first bad probe. Also, driver started to flood console with those ARQ event messages. This patch will prevent these issues by allowing error recovery mechanism to remove the failed device from the system instead of trying to recover from early PCI errors during device probe. Signed-off-by:
Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Johannes Weiner authored
commit 3ddf40e8 upstream. Commit 22f2ac51 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()") switched replace_page_cache() from raw radix tree operations to page_cache_tree_insert() but didn't take into account that the latter function, unlike the raw radix tree op, handles mapping->nrpages. As a result, that counter is bumped for each page replacement rather than balanced out even. The mapping->nrpages counter is used to skip needless radix tree walks when invalidating, truncating, syncing inodes without pages, as well as statistics for userspace. Since the error is positive, we'll do more page cache tree walks than necessary; we won't miss a necessary one. And we'll report more buffer pages to userspace than there are. The error is limited to fuse inodes. Fixes: 22f2ac51 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()") Signed-off-by:
-
Miklos Szeredi authored
commit a09f99ed upstream. Fuse allowed VFS to set mode in setattr in order to clear suid/sgid on chown and truncate, and (since writeback_cache) write. The problem with this is that it'll potentially restore a stale mode. The poper fix would be to let the filesystems do the suid/sgid clearing on the relevant operations. Possibly some are already doing it but there's no way we can detect this. So fix this by refreshing and recalculating the mode. Do this only if ATTR_KILL_S[UG]ID is set to not destroy performance for writes. This is still racy but the size of the window is reduced. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 5e2b8828 upstream. Without "default_permissions" the userspace filesystem's lookup operation needs to perform the check for search permission on the directory. If directory does not allow search for everyone (this is quite rare) then userspace filesystem has to set entry timeout to zero to make sure permissions are always performed. Changing the mode bits of the directory should also invalidate the (previously cached) dentry to make sure the next lookup will have a chance of updating the timeout, if needed. Reported-by:
Jean-Pierre André <jean-pierre.andre@wanadoo.fr> Signed-off-by:
-
Miklos Szeredi authored
commit cb3ae6d2 upstream. Make sure userspace filesystem is returning a well formed list of xattr names (zero or more nonzero length, null terminated strings). [Michael Theall: only verify in the nonzero size case] Signed-off-by:
-
Marcin Wojtas authored
commit a0245eb7 upstream. Original commit, which added support for Armada CP110 system controller used global variables for storing all clock information. It worked fine for Armada 7k SoC, with single CP110 block. After dual-CP110 Armada 8k was introduced, the data got overwritten and corrupted. This patch fixes the issue by allocating resources dynamically in the driver probe and storing it as platform drvdata. Fixes: d3da3eae ("clk: mvebu: new driver for Armada CP110 system ...") Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Reviewed-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Marcin Wojtas authored
commit ad715b26 upstream. Armada CP110 system controller comprises its own routine responsble for registering gate clocks. Among others 'flags' field in struct clk_init_data was not set, using a random values, which may cause an unpredicted behavior. This patch fixes the problem by resetting all fields of clk_init_data before assigning values for all gated clocks of Armada 7k/8k SoCs family. Fixes: d3da3eae ("clk: mvebu: new driver for Armada CP110 system ...") Signed-off-by:
-
Mike Marciniszyn authored
commit 72f53af2 upstream. There is a a bug in defered ack stuff that causes a race with the destroy of a QP. A packet causes a defered ack to be pended by putting the QP into an rcd queue. A return from the driver interrupt processing will process that rcd queue of QPs and attempt to do a direct send of the ack. At this point no locks are held and the above QP could now be put in the reset state in the qp destroy logic. A refcount protects the QP while it is in the rcd queue so it isn't going anywhere yet. If the direct send fails to allocate a pio buffer, hfi1_schedule_send() is called to trigger sending an ack from the send engine. There is no state test in that code path. The refcount is then dropped from the driver.c caller potentially allowing the qp destroy to continue from its refcount wait in parallel with the workqueue scheduling of the qp. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Peng Fan authored
commit 85714108 upstream. When dma_common_free_remap, the input parameter 'size' may not be page aligned. And, met kernel warning when doing iommu dma for usb on i.MX8 platform: " WARNING: CPU: 0 PID: 869 at mm/vmalloc.c:70 vunmap_page_range+0x1cc/0x1d0() Modules linked in: CPU: 0 PID: 869 Comm: kworker/u8:2 Not tainted 4.1.12-00444-gc5f9d1d-dirty #147 Hardware name: Freescale i.MX8DV Sabreauto (DT) Workqueue: ci_otg ci_otg_work Call trace: [<ffffffc000089920>] dump_backtrace+0x0/0x124 [<ffffffc000089a54>] show_stack+0x10/0x1c [<ffffffc0006d1e6c>] dump_stack+0x84/0xc8 [<ffffffc0000b4568>] warn_slowpath_common+0x98/0xd0 [<ffffffc0000b4664>] warn_slowpath_null+0x14/0x20 [<ffffffc000170348>] vunmap_page_range+0x1c8/0x1d0 [<ffffffc000170388>] unmap_kernel_range+0x20/0x88 [<ffffffc000460ad0>] dma_common_free_remap+0x74/0x84 [<ffffffc0000940d8>] __iommu_free_attrs+0x9c/0x178 [<ffffffc0005032bc>] ehci_mem_cleanup+0x140/0x194 [<ffffffc000503548>] ehci_stop+0x8c/0xdc [<ffffffc0004e8258>] usb_remove_hcd+0xf0/0x1cc [<ffffffc000516bc0>] host_stop+0x1c/0x58 [<ffffffc000514240>] ci_otg_work+0xdc/0x120 [<ffffffc0000c9c34>] process_one_work+0x134/0x33c [<ffffffc0000c9f78>] worker_thread+0x13c/0x47c [<ffffffc0000cf43c>] kthread+0xd8/0xf0 " For dma_common_pages_remap: dma_common_pages_remap |->get_vm_area_caller |->__get_vm_area_node |->size = PAGE_ALIGN(size); Round up to page aligned So, in dma_common_free_remap, we also need a page aligned size, pass 'PAGE_ALIGN(size)' to unmap_kernel_range. Signed-off-by:
Peng Fan <van.freenix@gmail.com> Signed-off-by:
-
Alexander Usyskin authored
commit e728ae27 upstream. The device lock was unnecessary obtained in bus rescan work before the amthif client search. That causes incorrect lock ordering and task hang: ... [88004.613213] INFO: task kworker/1:14:21832 blocked for more than 120 seconds. ... [88004.645934] Workqueue: events mei_cl_bus_rescan_work ... The correct lock order is cl_bus_lock device_lock me_clients_rwsem Move device_lock into amthif init function that called after me_clients_rwsem is released. This fixes regression introduced by commit: commit 025fb792 ("mei: split amthif client init from end of clients enumeration") Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Junjie Mao authored
commit 14155caf upstream. Fixes: 4246a0b6 ("block: add a bi_error field to struct bio") Signed-off-by:
Junjie Mao <junjie.mao@enight.me> Acked-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Omar Sandoval authored
commit 6675df31 upstream. There are two separate issues that can lead to corrupted free space trees. 1. The free space tree bitmaps had an endianness issue on big-endian systems which is fixed by an earlier patch in this series. 2. btrfs-progs before v4.7.3 modified filesystems without updating the free space tree. To catch both of these issues at once, we need to force the free space tree to be rebuilt. To do so, add a FREE_SPACE_TREE_VALID compat_ro bit. If the bit isn't set, we know that it was either produced by a broken big-endian kernel or may have been corrupted by btrfs-progs. This also provides us with a way to add rudimentary read-write support for the free space tree to btrfs-progs: it can just clear this bit and have the kernel rebuild the free space tree. Tested-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Omar Sandoval authored
commit f8d468a1 upstream. We moved the code for creating the free space tree the first time that it's enabled, but didn't move the clearing code along with it. This breaks my (undocumented) intention that `mount -o clear_cache,space_cache=v2` would clear the free space tree and then recreate it. Fixes: 511711af ("btrfs: don't run delayed references while we are creating the free space tree") Tested-by:
-
Omar Sandoval authored
commit 2fe1d551 upstream. In convert_free_space_to_{bitmaps,extents}(), we buffer the free space bitmaps in memory and copy them directly to/from the extent buffers with {read,write}_extent_buffer(). The extent buffer bitmap helpers use byte granularity, which is equivalent to a little-endian bitmap. This means that on big-endian systems, the in-memory bitmaps will be written to disk byte-swapped. To fix this, use byte-granularity for the bitmaps in memory. Fixes: a5ed9182 ("Btrfs: implement the free space B-tree") Tested-by:
-
Christian Lamparter authored
commit 6ee6d1cb upstream. Ben Greear reported: > I see lots of instability as soon as I load up the carl9710 NIC. > My application is going to be poking at it's debugfs files... > > BUG: KASAN: slab-out-of-bounds in carl9170_debugfs_read+0xd5/0x2a0 > [carl9170] at addr 0xffff8801bc1208b0 > Read of size 8 by task btserver/5888 > ======================================================================= > BUG kmalloc-256 (Tainted: G W ): kasan: bad access detected > ----------------------------------------------------------------------- > > INFO: Allocated in seq_open+0x50/0x100 age=2690 cpu=2 pid=772 >... This breakage was caused by the introduction of intermediate fops in debugfs by commit 9fd4dcec ("debugfs: prevent access to possibly dead file_operations at file open") Thankfully, the original/real fops are still available in d_fsdata. Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Christian Lamparter authored
commit 9c4a45b1 upstream. This patch fixes a crash that happens because b43legacy's debugfs code expects file->f_op to be a pointer to its own b43legacy_debugfs_fops struct. This is no longer the case since commit 9fd4dcec ("debugfs: prevent access to possibly dead file_operations at file open") Reviewed-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
-
Christian Lamparter authored
commit 51b275a6 upstream. This patch fixes a crash that happens because b43's debugfs code expects file->f_op to be a pointer to its own b43_debugfs_fops struct. This is no longer the case since commit 9fd4dcec ("debugfs: prevent access to possibly dead file_operations at file open") Reviewed-by:
-
Christian Lamparter authored
commit 86f0e067 upstream. This patch introduces an accessor which can be used by the users of debugfs (drivers, fs, ...) to get the original file_operations struct. It also removes the REAL_FOPS_DEREF macro in file.c and converts the code to use the public version. Previously, REAL_FOPS_DEREF was only available within the file.c of debugfs. But having a public getter available for debugfs users is important as some drivers (carl9170 and b43) use the pointer of the original file_operations in conjunction with container_of() within their debugfs implementations. Reviewed-by:
-
Vineet Gupta authored
commit cd5d38b0 upstream. Commit d9676fa1 ("ARCv2: Enable LOCKDEP"), changed local_save_flags() to not return raw STATUS32 but encoded in the form such that it could be fed directly to CLRI/SETI instructions. However the STATUS32.E[] was not captured correctly as it corresponds to bits [4:1] in the register and not [3:0] Fixes: d9676fa1 ("ARCv2: Enable LOCKDEP") Cc: Evgeny Voevodin <evgeny.voevodin@intel.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Yuriy Kolerov authored
commit bc0c7ece upstream. In the end of "arc_init_IRQ" STATUS32.IE flag is going to be affected by "flag" instruction but "flag" never touches IE flag on ARCv2. So "kflag" instruction must be used instead of "flag". Signed-off-by:
Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by:
-
Andy Shevchenko authored
commit b3965767 upstream. There are calls to serial8250_rpm_{get|put}() in __do_stop_tx_rs485() that are certainly placed in a wrong location. I dunno how it had been tested with runtime PM enabled because it is obvious "sleep in atomic context" error. Besides that serial8250_rpm_get() is called immediately after an IO just happened. It implies that the device is already powered on, see implementation of serial8250_em485_rts_after_send() and serial8250_clear_fifos() for the details. There is no bug have been seen due to, as I can guess, use of auto suspend mode when scheduled transaction to suspend is invoked quite lately than it's needed for a few writes to the port. It might be possible to trigger a warning if stop_tx_timer fires when device is suspended. Refactor the code to use runtime PM only in case of timer function. Fixes: 0c66940d ("tty/serial/8250: fix RS485 half-duplex RX") Cc: "Matwey V. Kornilov" <matwey@sai.msu.ru> Tested-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Kefeng Wang authored
commit e16b46f1 upstream. It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4("serial: 8250_dw: Add support for deferred probing") Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
-
