- 22 Oct, 2016 4 commits
-
-
Andy Shevchenko authored
commit b3965767 upstream. There are calls to serial8250_rpm_{get|put}() in __do_stop_tx_rs485() that are certainly placed in a wrong location. I dunno how it had been tested with runtime PM enabled because it is obvious "sleep in atomic context" error. Besides that serial8250_rpm_get() is called immediately after an IO just happened. It implies that the device is already powered on, see implementation of serial8250_em485_rts_after_send() and serial8250_clear_fifos() for the details. There is no bug have been seen due to, as I can guess, use of auto suspend mode when scheduled transaction to suspend is invoked quite lately than it's needed for a few writes to the port. It might be possible to trigger a warning if stop_tx_timer fires when device is suspended. Refactor the code to use runtime PM only in case of timer function. Fixes: 0c66940d ("tty/serial/8250: fix RS485 half-duplex RX") Cc: "Matwey V. Kornilov" <matwey@sai.msu.ru> Tested-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kefeng Wang authored
commit e16b46f1 upstream. It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4("serial: 8250_dw: Add support for deferred probing") Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
-
Richard Genoud authored
commit 0ae9fdef upstream. Since commit 18dfef9c ("serial: atmel: convert to irq handling provided mctrl-gpio"), interrupts from GPIOs are not disabled any more when the serial port is closed, leading to an oops when the one of the input pin is toggled (CTS/DSR/DCD/RNG). This is only the case if those pins are used as GPIOs, i.e. declared like that: usart1: serial@f8020000 { /* CTS and DTS will be handled by GPIO */ status = "okay"; rts-gpios = <&pioB 17 GPIO_ACTIVE_LOW>; cts-gpios = <&pioB 16 GPIO_ACTIVE_LOW>; dtr-gpios = <&pioB 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&pioC 31 GPIO_ACTIVE_LOW>; rng-gpios = <&pioB 12 GPIO_ACTIVE_LOW>; dcd-gpios = <&pioB 15 GPIO_ACTIVE_LOW>; }; That's because modem interrupts used to be freed in atmel_shutdown(). After commit 18dfef9c ("serial: atmel: convert to irq handling provided mctrl-gpio"), this code was just removed. Calling atmel_disable_ms() disables the interrupts and everything works fine again. Tested on at91sam9g35-cm (This patch doesn't apply on -stable kernels, fixes for 4.4 and 4.7 will be sent after this one is applied.) Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Fixes: 18dfef9c ("serial: atmel: convert to irq handling provided mctrl-gpio") Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Sascha Hauer authored
commit 4b75f800 upstream. The USR2_DCDIN bit is tested for in register usr1. As the name suggests the usr2 register should be used instead. This fixes reading the Carrier detect status. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Fixes: 90ebc483 ("serial: imx: repair and complete handshaking") Acked-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
- 20 Oct, 2016 5 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit 19be0eaf upstream. This is an ancient bug that was actually attempted to be fixed once (badly) by me eleven years ago in commit 4ceb5db9 ("Fix get_user_pages() race for write access") but that was then undone due to problems on s390 by commit f33ea7f4 ("fix get_user_pages bug"). In the meantime, the s390 situation has long been fixed, and we can now fix it by checking the pte_dirty() bit properly (and do it better). The s390 dirty bit was implemented in abf09bed ("s390/mm: implement software dirty bits") which made it into v3.9. Earlier kernels will have to look at the page state itself. Also, the VM has become more scalable, and what used a purely theoretical race back then has become easier to trigger. To fix it, we introduce a new internal FOLL_COW flag to mark the "yes, we already did a COW" rather than play racy games with FOLL_WRITE that is very fundamental, and then use the pte dirty flag to validate that the FOLL_COW flag is still valid. Reported-and-tested-by:
Phil "not Paul" Oester <kernel@linuxace.com> Acked-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Nick Piggin <npiggin@gmail.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Artem Savkov authored
commit 791cc43b upstream. Commit 2a6fba6d "xfs: only return -errno or success from attr ->put_listent" changes the returnvalue of __xfs_xattr_put_listen to 0 in case when there is insufficient space in the buffer assuming that setting context->count to -1 would be enough, but all of the ->put_listent callers only check seen_enough. This results in a failed assertion: XFS: Assertion failed: context->count >= 0, file: fs/xfs/xfs_xattr.c, line: 175 in insufficient buffer size case. This is only reproducible with at least 2 xattrs and only when the buffer gets depleted before the last one. Furthermore if buffersize is such that it is enough to hold the last xattr's name, but not enough to hold the sum of preceeding xattr names listxattr won't fail with ERANGE, but will suceed returning last xattr's name without the first character. The first character end's up overwriting data stored at (context->alist - 1). Signed-off-by:
Artem Savkov <asavkov@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Cc: Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Heiner Kallweit authored
commit 0d5644b7 upstream. Runtime PM should be configured already once we call device_add. See also the description in this mail thread https://lists.linuxfoundation.org/pipermail/linux-pm/2009-November/023198.html or the order of calls e.g. in usb_new_device. The changed order also helps to avoid scenarios where runtime pm for &shost->shost_gendev is activated whilst the parent is suspended, resulting in error message "runtime PM trying to activate child device hostx but parent yyy is not active". In addition properly reverse the runtime pm calls in the error path. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Laurent Pinchart authored
commit fd44aa9a upstream. The rcar_fcp_enable() function immediately returns successfully when the FCP device pointer is NULL to avoid forcing the users to check the FCP device manually before every call. However, the stub version of the function used when the FCP driver is disabled returns -ENOSYS unconditionally, resulting in a different API contract for the two versions of the function. As a user that requires FCP support will fail at probe time when calling rcar_fcp_get() if the FCP driver is disabled, the stub version of the rcar_fcp_enable() function will only be called with a NULL FCP device. We can thus return 0 unconditionally to align the behaviour with the normal version of the function. Reported-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
- 16 Oct, 2016 31 commits
-
-
Greg Kroah-Hartman authored
-
Jarkko Sakkinen authored
commit 72fd50e1 upstream. The req_canceled() callback is used by tpm_transmit() periodically to check whether the request has been canceled while it is receiving a response from the TPM. The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel callback, which has two consequences: * Cancel might not happen. * req_canceled() always returns zero. A better place to clear the register is when starting to send a new command. The behavior of TPM_CRB_CTRL_CANCEL is described in the section 5.5.3.6 of the PTP specification. Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Jarkko Sakkinen authored
commit d4816edf upstream. Unseal and load operations should be done as an atomic operation. This commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted() can do the locking by itself. Fixes: 0fe54803 ("keys, trusted: seal/unseal with TPM 2.0 chips") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Miklos Szeredi authored
commit e71b9dff upstream. Ima tries to call ->setxattr() on overlayfs dentry after having locked underlying inode, which results in a deadlock. Reported-by:
Krisztian Litkey <kli@iki.fi> Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Dmitry Tunin authored
commit 1144a4ee upstream. BugLink: https://bugs.launchpad.net/bugs/1535802 T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3011 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Christophe Jaillet authored
commit af48d7bc upstream. We know that 'ret = 0' because it has been tested a few lines above. So, if 'kzalloc' fails, 0 will be returned instead of an error code. Return -ENOMEM instead. Fixes: a0d46a3d ("ARM: cpuidle: Register per cpuidle device") Signed-off-by:
Christophe Jaillet <christophe.jaillet@wanadoo.fr> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Linus Walleij authored
commit dcf5907e upstream. The Qualcomm SPMI GPIO and MPP lines are problematic: the are fetched from the main MFD driver with platform_get_irq() which means that at this point they will all be assigned the flags set up for the interrupts in the device tree. That is problematic since these are flagged as rising edge and an this point the interrupt descriptor is assigned a rising edge, while the only thing the GPIO/MPP drivers really do is issue irq_get_irqchip_state() on the line to read it out and to provide a .to_irq() helper for *other* IRQ consumers. If another device tree node tries to flag the same IRQ for use as something else than rising edge, the kernel irqdomain core will protest like this: type mismatch, failed to map hwirq-NN for <FOO>! Which is what happens when the device tree defines two contradictory flags for the same interrupt line. To work around this and alleviate the problem, assign 0 as flag for the interrupts taken by the PM GPIO and MPP drivers. This will lead to the flag being unset, and a second consumer requesting rising, falling, both or level interrupts will be respected. This is what the qcom-pm*.dtsi files already do. Switched to using the symbolic name IRQ_TYPE_NONE so that we get this more readable. This misconfiguration was caused by a copy/pasting the APQ8064 set-up, the latter has been fixed in a separate patch. Tested with one of the SPMI GPIOs: after this I can successfully request one of these GPIOs as falling edge from the device tree. Fixes: 0840ea9e ("ARM: dts: add GPIO and MPP to MSM8660 PMIC") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Linus Walleij authored
commit ca88696e upstream. The Qualcomm PMIC GPIO and MPP lines are problematic: the are fetched from the main MFD driver with platform_get_irq() which means that at this point they will all be assigned the flags set up for the interrupts in the device tree. That is problematic since these are flagged as rising edge and an this point the interrupt descriptor is assigned a rising edge, while the only thing the GPIO/MPP drivers really do is issue irq_get_irqchip_state() on the line to read it out and to provide a .to_irq() helper for *other* IRQ consumers. If another device tree node tries to flag the same IRQ for use as something else than rising edge, the kernel irqdomain core will protest like this: type mismatch, failed to map hwirq-NN for <FOO>! Which is what happens when the device tree defines two contradictory flags for the same interrupt line. To work around this and alleviate the problem, assign 0 as flag for the interrupts taken by the PM GPIO and MPP drivers. This will lead to the flag being unset, and a second consumer requesting rising, falling, both or level interrupts will be respected. This is what the qcom-pm*.dtsi files already do. Switched to using the symbolic name IRQ_TYPE_NONE so that we get this more readable. Fixes: bce36046 ("ARM: dts: apq8064: add pm8921 mpp support") Fixes: 874443fe ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Grzegorz Jaszczyk authored
commit 061492cf upstream. The armada-390.dtsi was broken since the first patch which adds Device Tree files for Armada 39x SoC was introduced. Signed-off-by:
Grzegorz Jaszczyk <jaz@semihalf.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes 538da83d ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board") Signed-off-by:
-
Russell King authored
commit fb833b1f upstream. Commit 215e362d ("ARM: 8306/1: loop_udelay: remove bogomips value limitation") tried to increase the bogomips limitation, but in doing so messed up udelay such that it always gives about a 5% error in the delay, even if we use a timer. The calculation is: loops = UDELAY_MULT * us_delay * ticks_per_jiffy >> UDELAY_SHIFT Originally, UDELAY_MULT was ((UL(2199023) * HZ) >> 11) and UDELAY_SHIFT 30. Assuming HZ=100, us_delay of 1000 and ticks_per_jiffy of 1660000 (eg, 166MHz timer, 1ms delay) this would calculate: ((UL(2199023) * HZ) >> 11) * 1000 * 1660000 >> 30 => 165999 With the new values of 2047 * HZ + 483648 * HZ / 1000000 and 31, we get: (2047 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31 => 158269 which is incorrect. This is due to a typo - correcting it gives: (2147 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31 => 165999 i.o.w, the original value. Fixes: 215e362d ("ARM: 8306/1: loop_udelay: remove bogomips value limitation") Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Josh Poimboeuf authored
commit 72b4f6a5 upstream. On x86_32, when an interrupt happens from kernel space, SS and SP aren't pushed and the existing stack is used. So pt_regs is effectively two words shorter, and the previous stack pointer is normally the memory after the shortened pt_regs, aka '®s->sp'. But in the rare case where the interrupt hits right after the stack pointer has been changed to point to an empty stack, like for example when call_on_stack() is used, the address immediately after the shortened pt_regs is no longer on the stack. In that case, instead of '®s->sp', the previous stack pointer should be retrieved from the beginning of the current stack page. kernel_stack_pointer() wants to do that, but it forgets to dereference the pointer. So instead of returning a pointer to the previous stack, it returns a pointer to the beginning of the current stack. Note that it's probably outside of kernel_stack_pointer()'s scope to be switching stacks at all. The x86_64 version of this function doesn't do it, and it would be better for the caller to do it if necessary. But that's a patch for another day. This just fixes the original intent. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 0788aa6a ("x86: Prepare removal of previous_esp from i386 thread_info structure") Link: http://lkml.kernel.org/r/472453d6e9f6a2d4ab16aaed4935f43117111566.1471535549.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Nicolas Iooss authored
commit ba6d018e upstream. __show_regs() fails to dump the PKRU state when the debug registers are in their default state because there is a return statement on the debug register state. Change the logic to report PKRU value even when debug registers are in their default state. Fixes:c0b17b5b ("x86/mm/pkeys: Dump PKRU with other kernel registers") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by:
Dave Hansen <dave.hansen@linux.intel.com> Link: http://lkml.kernel.org/r/20160910183045.4618-1-nicolas.iooss_linux@m4x.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Prarit Bhargava authored
commit 2a51fe08 upstream. When a CPU is physically added to a system then the MADT table is not updated. If subsequently a kdump kernel is started on that physically added CPU then the ACPI enumeration fails to provide the information for this CPU which is now the boot CPU of the kdump kernel. As a consequence, generic_processor_info() is not invoked for that CPU so the number of enumerated processors is 0 and none of the initializations, including the logical package id management, are performed. We have code which relies on the correctness of the logical package map and other information which is initialized via generic_processor_info(). Executing such code will result in undefined behaviour or kernel crashes. This problem applies only to the kdump kernel because a normal kexec will switch to the original boot CPU, which is enumerated in MADT, before jumping into the kexec kernel. The boot code already has a check for num_processors equal 0 in prefill_possible_map(). We can use that check as an indicator that the enumeration of the boot CPU did not happen and invoke generic_processor_info() for it. That initializes the relevant data for the boot CPU and therefore prevents subsequent failure. [ tglx: Refined the code and rewrote the changelog ] Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Fixes: 1f12e32f ("x86/topology: Create logical package id") Cc: Peter Zijlstra <peterz@infradead.org> Cc: Len Brown <len.brown@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: dyoung@redhat.com Cc: Eric Biederman <ebiederm@xmission.com> Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1475514432-27682-1-git-send-email-prarit@redhat.comSigned-off-by:
-
Denys Vlasenko authored
commit cff9ab2b upstream. The array has a size of MAX_LOCAL_APIC, which can be as large as 32k, so it can consume up to 128k. The array has been there forever and was never used for anything useful other than a version mismatch check which was introduced in 2009. There is no reason to store the version in an array. The kernel is not prepared to handle different APIC versions anyway, so the real important part is to detect a version mismatch and warn about it, which can be done with a single variable as well. [ tglx: Massaged changelog ] Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Borislav Petkov <bp@alien8.de> CC: Brian Gerst <brgerst@gmail.com> CC: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20160913181232.30815-1-dvlasenk@redhat.comSigned-off-by:
-
Andy Shevchenko authored
commit f43ea76c upstream. On Penwell SRAM has to be powered on, otherwise it prevents booting. Signed-off-by:
-
Andy Shevchenko authored
commit 8e522e1d upstream. Commit: ca22312d ("x86/platform/intel-mid: Extend PWRMU to support Penwell") ... enabled the PWRMU driver on platforms based on Intel Penwell, but unfortunately this is not enough. Add Intel Penwell ID to pci-mid.c driver as well. To avoid confusion in the future add a comment to both drivers. Signed-off-by:
-
Andy Shevchenko authored
commit f5fbf848 upstream. Merrifield2 is actually Moorefield. Rename it accordingly and drop tail digit from Merrifield1. Signed-off-by:
-
Dave Hansen authored
commit d4b05923 upstream. Our XSAVE features are divided into two categories: those that generate FPU exceptions, and those that do not. MPX and pkeys do not generate FPU exceptions and thus can not be used lazily. We disable them when lazy mode is forced on. We have a pair of masks to collect these two sets of features, but XFEATURE_MASK_PKRU was added to the wrong mask: XFEATURE_MASK_LAZY. Fix it by moving the feature to XFEATURE_MASK_EAGER. Note: this only causes problem if you boot with lazy FPU mode (eagerfpu=off) which is *not* the default. It also only affects hardware which is not currently publicly available. It looks like eager mode is going away, but we still need this patch applied to any kernel that has protection keys and lazy mode, which is 4.6 through 4.8 at this point, and 4.9 if the lazy removal isn't sent to Linus for 4.9. Fixes: c8df4009 ("x86/fpu, x86/mm/pkeys: Add PKRU xsave fields and data structures") Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20161007162342.28A49813@viggo.jf.intel.comSigned-off-by:
-
Mika Westerberg authored
commit db91aa79 upstream. When a CPU is about to be offlined we call fixup_irqs() that resets IRQ affinities related to the CPU in question. The same thing is also done when the system is suspended to S-states like S3 (mem). For each IRQ we try to complete any on-going move regardless whether the IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch its chip_data, assume it is of type struct apic_chip_data and manipulate it by clearing old_domain mask etc. For irq_chips that are not part of the x86_vector_domain, like those created by various GPIO drivers, will find their chip_data being changed unexpectly. Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets corrupted after resume: # cat /sys/kernel/debug/gpio gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00: gpio-511 ( |sysfs ) in hi # rtcwake -s10 -mmem <10 seconds passes> # cat /sys/kernel/debug/gpio gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00: gpio-511 ( |sysfs ) in ? Note '?' in the output. It means the struct gpio_chip ->get function is NULL whereas before suspend it was there. Fix this by first checking that the IRQ belongs to x86_vector_domain before we try to use the chip_data as struct apic_chip_data. Reported-and-tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Link: http://lkml.kernel.org/r/20161003101708.34795-1-mika.westerberg@linux.intel.comSigned-off-by:
-
Dan Williams authored
commit 917db484 upstream. In commit: ec776ef6 ("x86/mm: Add support for the non-standard protected e820 type") Christoph references the original patch I wrote implementing pmem support. The intent of the 'max_pfn' changes in that commit were to enable persistent memory ranges to be covered by the struct page memmap by default. However, that approach was abandoned when Christoph ported the patches [1], and that functionality has since been replaced by devm_memremap_pages(). In the meantime, this max_pfn manipulation is confusing kdump [2] that assumes that everything covered by the max_pfn is "System RAM". This results in kdump hanging or crashing. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-March/000348.html [2]: https://bugzilla.redhat.com/show_bug.cgi?id=1351098 So fix it. Reported-by:
Zhang Yi <yizhan@redhat.com> Reported-by:
Jeff Moyer <jmoyer@redhat.com> Tested-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
Mark Rutland authored
commit b5e7307d upstream. In some places, dump_backtrace() is called with a NULL tsk parameter, e.g. in bug_handler() in arch/arm64, or indirectly via show_stack() in core code. The expectation is that this is treated as if current were passed instead of NULL. Similar is true of unwind_frame(). Commit a80a0eb7 ("arm64: make irq_stack_ptr more robust") didn't take this into account. In dump_backtrace() it compares tsk against current *before* we check if tsk is NULL, and in unwind_frame() we never set tsk if it is NULL. Due to this, we won't initialise irq_stack_ptr in either function. In dump_backtrace() this results in calling dump_mem() for memory immediately above the IRQ stack range, rather than for the relevant range on the task stack. In unwind_frame we'll reject unwinding frames on the IRQ stack. In either case this results in incomplete or misleading backtrace information, but is not otherwise problematic. The initial percpu areas (including the IRQ stacks) are allocated in the linear map, and dump_mem uses __get_user(), so we shouldn't access anything with side-effects, and will handle holes safely. This patch fixes the issue by having both functions handle the NULL tsk case before doing anything else with tsk. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Fixes: a80a0eb7 ("arm64: make irq_stack_ptr more robust") Acked-by:
James Morse <james.morse@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yang Shi <yang.shi@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Dan Carpenter authored
commit ac0e89bb upstream. We use logical negate where bitwise negate was intended. It means that we never return -EINVAL here. Fixes: ce11e48b ('KVM: PPC: E500: Add userspace debug stub support') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Christoffer Dall authored
commit 0099b770 upstream. If the vgic hasn't been created and initialized, we shouldn't attempt to look at its data structures or flush/sync anything to the GIC hardware. This fixes an issue reported by Alexander Graf when using a userspace irqchip. Fixes: 0919e84c ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework") Reported-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 6fe407f2 upstream. If userspace creates a PMU for the VCPU, but doesn't create an in-kernel irqchip, then we end up in a nasty path where we try to take an uninitialized spinlock, which can lead to all sorts of breakages. Luckily, QEMU always creates the VGIC before the PMU, so we can establish this as ABI and check for the VGIC in the PMU init stage. This can be relaxed at a later time if we want to support PMU with a userspace irqchip. Cc: Shannon Zhao <shannon.zhao@linaro.org> Acked-by:
-
James Hogan authored
commit 91e4f1b6 upstream. When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate TLB entries on the local CPU. This doesn't work correctly on an SMP host when the guest is migrated to a different physical CPU, as it could pick up stale TLB mappings from the last time the vCPU ran on that physical CPU. Therefore invalidate both user and kernel host ASIDs on other CPUs, which will cause new ASIDs to be generated when it next runs on those CPUs. We're careful only to do this if the TLB entry was already valid, and only for the kernel ASID where the virtual address it mapped is outside of the guest user address range. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
-
Thomas Huth authored
commit fa73c3b2 upstream. The MMCR2 register is available twice, one time with number 785 (privileged access), and one time with number 769 (unprivileged, but it can be disabled completely). In former times, the Linux kernel was using the unprivileged register 769 only, but since commit 8dd75ccb ("powerpc: Use privileged SPR number for MMCR2"), it uses the privileged register 785 instead. The KVM-PR code then of course also switched to use the SPR 785, but this is causing older guest kernels to crash, since these kernels still access 769 instead. So to support older kernels with KVM-PR again, we have to support register 769 in KVM-PR, too. Fixes: 8dd75ccbSigned-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Boris Ostrovsky authored
commit a6a198bc upstream. Early during boot topology_update_package_map() computes logical_pkg_ids for all present processors. Later, when processors are brought up, identify_cpu() updates these values based on phys_pkg_id which is a function of initial_apicid. On PV guests the latter may point to a non-existing node, causing logical_pkg_ids to be set to -1. Intel's RAPL uses logical_pkg_id (as topology_logical_package_id()) to index its arrays and therefore in this case will point to index 65535 (since logical_pkg_id is a u16). This could lead to either a crash or may actually access random memory location. As a workaround, we recompute topology during CPU bringup to reset logical_pkg_id to a valid value. (The reason for initial_apicid being bogus is because it is initial_apicid of the processor from which the guest is launched. This value is CPUID(1).EBX[31:24]) Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 88003fb1 upstream. This fixes a compile failure: drivers/built-in.o: In function `wm8350_i2c_probe': core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c' Makefile:953: recipe for target 'vmlinux' failed Fixes: 52b461b8 ("mfd: Add regmap cache support for wm8350") Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit 9a6dc644 upstream. set_bit() and clear_bit() take the bit number so this code is really doing "1 << (1 << irq)" which is a double shift bug. It's done consistently so it won't cause a problem unless "irq" is more than 4. Fixes: 70c6cce0 ('mfd: Support 88pm80x in 80x driver') Signed-off-by:
-
Boris Brezillon authored
commit 2c2469bc upstream. readl_poll_timeout() calls usleep_range(), but regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap spinlock held). Replace the readl_poll_timeout() call by readl_poll_timeout_atomic(). Fixes: ea31c0cf ("mfd: atmel-hlcdc: Implement config synchronization") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Lu Baolu authored
commit 8dcc5ff8 upstream. Member "status" of struct usb_sg_request is managed by usb core. A spin lock is used to serialize the change of it. The driver could check the value of req->status, but should avoid changing it without the hold of the spinlock. Otherwise, it could cause race or error in usb core. This patch could be backported to stable kernels with version later than v3.14. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
