1. 11 Aug, 2020 8 commits
    • Linus Torvalds's avatar
      Merge tag 'rpmsg-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc · dded87af
      Linus Torvalds authored
      Pull rpmsg update from Bjorn Andersson:
       "This ensures that rpmsg uses little-endian, per the VirtIO 1.0
        specification"
      
      * tag 'rpmsg-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
        rpmsg: virtio: add endianness conversions
      dded87af
    • Linus Torvalds's avatar
      Merge tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm · 4bf5e361
      Linus Torvalds authored
      Pull libnvdimm updayes from Vishal Verma:
       "You'd normally receive this pull request from Dan Williams, but he's
        busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
        this cycle.
      
        This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
        and a few small cleanups and fixes in libnvdimm and DAX. I'd
        originally intended to make separate topic-based pull requests - one
        for libnvdimm, and one for DAX, but some of the DAX material fell out
        since it wasn't quite ready.
      
        Summary:
      
         - add 'Runtime Firmware Activation' support for NVDIMMs that
           advertise the relevant capability
      
         - misc libnvdimm and DAX cleanups"
      
      * tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
        libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
        libnvdimm/security: the 'security' attr never show 'overwrite' state
        libnvdimm/security: fix a typo
        ACPI: NFIT: Fix ARS zero-sized allocation
        dax: Fix incorrect argument passed to xas_set_err()
        ACPI: NFIT: Add runtime firmware activate support
        PM, libnvdimm: Add runtime firmware activation support
        libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
        drivers/dax: Expand lock scope to cover the use of addresses
        fs/dax: Remove unused size parameter
        dax: print error message by pr_info() in __generic_fsdax_supported()
        driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
        tools/testing/nvdimm: Emulate firmware activation commands
        tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
        tools/testing/nvdimm: Add command debug messages
        tools/testing/nvdimm: Cleanup dimm index passing
        ACPI: NFIT: Define runtime firmware activation commands
        ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
        libnvdimm: Validate command family indices
      4bf5e361
    • Linus Torvalds's avatar
      Merge tag 'perf-tools-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux · 00e4db51
      Linus Torvalds authored
      Pull perf tools updates from Arnaldo Carvalho de Melo:
       "New features:
      
         - Introduce controlling how 'perf stat' and 'perf record' works via a
           control file descriptor, allowing starting with events configured
           but disabled until commands are received via the control file
           descriptor. This allows, for instance for tools such as Intel VTune
           to make further use of perf as its Linux platform driver.
      
         - Improve 'perf record' to to register in a perf.data file header the
           clockid used to help later correlate things like syslog files and
           perf events recorded.
      
         - Add basic syscall and find_next_bit benchmarks to 'perf bench'.
      
         - Allow using computed metrics in calculating other metrics. For
           instance:
      
      	  {
      	    .metric_expr    = "l2_rqsts.demand_data_rd_hit + l2_rqsts.pf_hit + l2_rqsts.rfo_hit",
      	    .metric_name    = "DCache_L2_All_Hits",
      	  },
      	  {
      	    .metric_expr    = "max(l2_rqsts.all_demand_data_rd - l2_rqsts.demand_data_rd_hit, 0) + l2_rqsts.pf_miss + l2_rqsts.rfo_miss",
      	    .metric_name    = "DCache_L2_All_Miss",
      	  },
      	  {
      	     .metric_expr    = "dcache_l2_all_hits + dcache_l2_all_miss",
      	     .metric_name    = "DCache_L2_All",
      	  }
      
         - Add suport for 'd_ratio', '>' and '<' operators to the expression
           resolver used in calculating metrics in 'perf stat'.
      
        Support for new kernel features:
      
         - Support TEXT_POKE and KSYMBOL_TYPE_OOL perf metadata events to cope
           with things like ftrace, trampolines, i.e. changes in the kernel
           text that gets in the way of properly decoding Intel PT hardware
           traces, for instance.
      
        Intel PT:
      
         - Add various knobs to reduce the volume of Intel PT traces by
           reducing the level of details such as decoding just some types of
           packets (e.g., FUP/TIP, PSB+), also filtering by time range.
      
         - Add new itrace options (log flags to the 'd' option, error flags to
           the 'e' one, etc), controlling how Intel PT is transformed into
           perf events, document some missing options (e.g., how to synthesize
           callchains).
      
        BPF:
      
         - Properly report BPF errors when parsing events.
      
         - Do not setup side-band events if LIBBPF is not linked, fixing a
           segfault.
      
        Libraries:
      
         - Improvements to the libtraceevent plugin mechanism.
      
         - Improve libtracevent support for KVM trace events SVM exit reasons.
      
         - Add a libtracevent plugins for decoding syscalls/sys_enter_futex
           and for tlb_flush.
      
         - Ensure sample_period is set libpfm4 events in 'perf test'.
      
         - Fixup libperf namespacing, to make sure what is in libperf has the
           perf_ namespace while what is now only in tools/perf/ doesn't use
           that prefix.
      
        Arch specific:
      
         - Improve the testing of vendor events and metrics in 'perf test'.
      
         - Allow no ARM CoreSight hardware tracer sink to be specified on
           command line.
      
         - Fix arm_spe_x recording when mixed with other perf events.
      
         - Add s390 idle functions 'psw_idle' and 'psw_idle_exit' to list of
           idle symbols.
      
         - List kernel supplied event aliases for arm64 in 'perf list'.
      
         - Add support for extended register capability in PowerPC 9 and 10.
      
         - Added nest IMC power9 metric events.
      
        Miscellaneous:
      
         - No need to setup sample_regs_intr/sample_regs_user for dummy
           events.
      
         - Update various copies of kernel headers, some causing perf to
           handle new syscalls, MSRs, etc.
      
         - Improve usage of flex and yacc, enabling warnings and addressing
           the fallout.
      
         - Add missing '--output' option to 'perf kmem' so that it can pass it
           along to 'perf record'.
      
         - 'perf probe' fixes related to adding multiple probes on the same
           address for the same event.
      
         - Make 'perf probe' warn if the target function is a GNU indirect
           function.
      
         - Remove //anon mmap events from 'perf inject jit' to fix supporting
           both using ELF files for generated functions and the perf-PID.map
           approaches"
      
      * tag 'perf-tools-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (144 commits)
        perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set
        perf tools powerpc: Add support for extended regs in power10
        perf tools powerpc: Add support for extended register capability
        tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
        tools arch x86: Sync asm/cpufeatures.h with the kernel sources
        tools arch x86: Sync the msr-index.h copy with the kernel sources
        tools headers UAPI: update linux/in.h copy
        tools headers API: Update close_range affected files
        perf script: Add 'tod' field to display time of day
        perf script: Change the 'enum perf_output_field' enumerators to be 64 bits
        perf data: Add support to store time of day in CTF data conversion
        perf tools: Move clockid_res_ns under clock struct
        perf header: Store clock references for -k/--clockid option
        perf tools: Add clockid_name function
        perf clockid: Move parse_clockid() to new clockid object
        tools lib traceevent: Handle possible strdup() error in tep_add_plugin_path() API
        libtraceevent: Fixed description of tep_add_plugin_path() API
        libtraceevent: Fixed type in PRINT_FMT_STING
        libtraceevent: Fixed broken indentation in parse_ip4_print_args()
        libtraceevent: Improve error handling of tep_plugin_add_option() API
        ...
      00e4db51
    • Linus Torvalds's avatar
      Merge tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest · ed3854ff
      Linus Torvalds authored
      Pull ktest updates from Steven Rostedt:
      
       - Have config-bisect save the good/bad configs at each step.
      
       - Show log file location even on success
      
       - Add PRE_TEST_DIE to kill test if the PRE_TEST fails
      
       - Add a NOT operator for conditionals in config file
      
       - Add the log output of the last test when emailing on failure.
      
       - Other minor clean ups and small fixes.
      
      * tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
        ktest.pl: Fix spelling mistake "Cant" -> "Can't"
        ktest.pl: Change the logic to control the size of the log file emailed
        ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed
        ktest.pl: Add the log of last test in email on failure
        ktest.pl: Turn off buffering to the log file
        ktest.pl: Just open up the log file once
        ktest.pl: Add a NOT operator
        ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails
        ktest.pl: Always show log file location if defined even on success
        ktest.pl: Have config-bisect save each config used in the bisect
      ed3854ff
    • Linus Torvalds's avatar
      Merge tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 97d052ea
      Linus Torvalds authored
      Pull locking updates from Thomas Gleixner:
       "A set of locking fixes and updates:
      
         - Untangle the header spaghetti which causes build failures in
           various situations caused by the lockdep additions to seqcount to
           validate that the write side critical sections are non-preemptible.
      
         - The seqcount associated lock debug addons which were blocked by the
           above fallout.
      
           seqcount writers contrary to seqlock writers must be externally
           serialized, which usually happens via locking - except for strict
           per CPU seqcounts. As the lock is not part of the seqcount, lockdep
           cannot validate that the lock is held.
      
           This new debug mechanism adds the concept of associated locks.
           sequence count has now lock type variants and corresponding
           initializers which take a pointer to the associated lock used for
           writer serialization. If lockdep is enabled the pointer is stored
           and write_seqcount_begin() has a lockdep assertion to validate that
           the lock is held.
      
           Aside of the type and the initializer no other code changes are
           required at the seqcount usage sites. The rest of the seqcount API
           is unchanged and determines the type at compile time with the help
           of _Generic which is possible now that the minimal GCC version has
           been moved up.
      
           Adding this lockdep coverage unearthed a handful of seqcount bugs
           which have been addressed already independent of this.
      
           While generally useful this comes with a Trojan Horse twist: On RT
           kernels the write side critical section can become preemtible if
           the writers are serialized by an associated lock, which leads to
           the well known reader preempts writer livelock. RT prevents this by
           storing the associated lock pointer independent of lockdep in the
           seqcount and changing the reader side to block on the lock when a
           reader detects that a writer is in the write side critical section.
      
         - Conversion of seqcount usage sites to associated types and
           initializers"
      
      * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
        locking/seqlock, headers: Untangle the spaghetti monster
        locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
        x86/headers: Remove APIC headers from <asm/smp.h>
        seqcount: More consistent seqprop names
        seqcount: Compress SEQCNT_LOCKNAME_ZERO()
        seqlock: Fold seqcount_LOCKNAME_init() definition
        seqlock: Fold seqcount_LOCKNAME_t definition
        seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
        hrtimer: Use sequence counter with associated raw spinlock
        kvm/eventfd: Use sequence counter with associated spinlock
        userfaultfd: Use sequence counter with associated spinlock
        NFSv4: Use sequence counter with associated spinlock
        iocost: Use sequence counter with associated spinlock
        raid5: Use sequence counter with associated spinlock
        vfs: Use sequence counter with associated spinlock
        timekeeping: Use sequence counter with associated raw spinlock
        xfrm: policy: Use sequence counters with associated lock
        netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
        netfilter: conntrack: Use sequence counter with associated spinlock
        sched: tasks: Use sequence counter with associated spinlock
        ...
      97d052ea
    • Linus Torvalds's avatar
      Merge tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs · 086ba2ec
      Linus Torvalds authored
      Pull f2fs updates from Jaegeuk Kim:
       "In this round, we've added two small interfaces: (a) GC_URGENT_LOW
        mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for
        security.
      
        The new GC mode allows Android to run some lower priority GCs in
        background, while new ioctl discards user information without race
        condition when the account is removed.
      
        In addition, some patches were merged to address latency-related
        issues. We've fixed some compression-related bug fixes as well as edge
        race conditions.
      
        Enhancements:
         - add GC_URGENT_LOW mode in gc_urgent
         - introduce F2FS_IOC_SEC_TRIM_FILE ioctl
         - bypass racy readahead to improve read latencies
         - shrink node_write lock coverage to avoid long latency
      
        Bug fixes:
         - fix missing compression flag control, i_size, and mount option
         - fix deadlock between quota writes and checkpoint
         - remove inode eviction path in synchronous path to avoid deadlock
         - fix to wait GCed compressed page writeback
         - fix a kernel panic in f2fs_is_compressed_page
         - check page dirty status before writeback
         - wait page writeback before update in node page write flow
         - fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry
      
        We've added some minor sanity checks and refactored trivial code
        blocks for better readability and debugging information"
      
      * tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
        f2fs: prepare a waiter before entering io_schedule
        f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive
        f2fs: replace test_and_set/clear_bit() with set/clear_bit()
        f2fs: make file immutable even if releasing zero compression block
        f2fs: compress: disable compression mount option if compression is off
        f2fs: compress: add sanity check during compressed cluster read
        f2fs: use macro instead of f2fs verity version
        f2fs: fix deadlock between quota writes and checkpoint
        f2fs: correct comment of f2fs_exist_written_data
        f2fs: compress: delay temp page allocation
        f2fs: compress: fix to update isize when overwriting compressed file
        f2fs: space related cleanup
        f2fs: fix use-after-free issue
        f2fs: Change the type of f2fs_flush_inline_data() to void
        f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl
        f2fs: should avoid inode eviction in synchronous path
        f2fs: segment.h: delete a duplicated word
        f2fs: compress: fix to avoid memory leak on cc->cpages
        f2fs: use generic names for generic ioctls
        f2fs: don't keep meta inode pages used for compressed block migration
        ...
      086ba2ec
    • Linus Torvalds's avatar
      Merge tag 'gfs2-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 · 8c2618a6
      Linus Torvalds authored
      Pull gfs2 updates from Andreas Gruenbacher:
      
       - Make sure transactions won't be started recursively in
         gfs2_block_zero_range (bug introduced in 5.4 when switching to
         iomap_zero_range)
      
       - Fix a glock holder refcount leak introduced in the iopen glock
         locking scheme rework merged in 5.8.
      
       - A few other small improvements (debugging, stack usage, comment
         fixes).
      
      * tag 'gfs2-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
        gfs2: When gfs2_dirty_inode gets a glock error, dump the glock
        gfs2: Never call gfs2_block_zero_range with an open transaction
        gfs2: print details on transactions that aren't properly ended
        gfs2: Fix inaccurate comment
        fs: Fix typo in comment
        gfs2: Fix refcount leak in gfs2_glock_poke
        gfs2: Pass glock holder to gfs2_file_direct_{read,write}
        gfs2: Add some flags missing from glock output
      8c2618a6
    • Linus Torvalds's avatar
      Merge tag 'for-linus-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs · 163c3e3d
      Linus Torvalds authored
      Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
       "JFFS2:
         - Fix for a corner case while mounting
         - Fix for an use-after-free issue
      
        UBI:
         - Fix for a memory load while attaching
         - Don't produce an anchor PEB with fastmap being disabled
      
        UBIFS:
         - Fix for orphan inode logic
         - Spelling fixes
         - New mount option to specify filesystem version"
      
      * tag 'for-linus-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
        jffs2: fix UAF problem
        jffs2: fix jffs2 mounting failure
        ubifs: Fix wrong orphan node deletion in ubifs_jnl_update|rename
        ubi: fastmap: Free fastmap next anchor peb during detach
        ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabled
        ubifs: misc.h: delete a duplicated word
        ubifs: add option to specify version for new file systems
      163c3e3d
  2. 10 Aug, 2020 8 commits
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 4bcf69e5
      Linus Torvalds authored
      Pull input updates from Dmitry Torokhov:
      
       - an update to Elan touchpad controller driver supporting newer ICs
         with enhanced precision reports and a new firmware update process
      
       - an update to EXC3000 touch controller supporting additional parts
      
       - assorted driver fixups
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits)
        Input: exc3000 - add support to query model and fw_version
        Input: exc3000 - add reset gpio support
        Input: exc3000 - add EXC80H60 and EXC80H84 support
        dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
        Input: sentelic - fix error return when fsp_reg_write fails
        Input: alps - remove redundant assignment to variable ret
        Input: ims-pcu - return error code rather than -ENOMEM
        Input: elan_i2c - add ic type 0x15
        Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
        Input: uinput - fix typo in function name documentation
        Input: ati_remote2 - add missing newlines when printing module parameters
        Input: psmouse - add a newline when printing 'proto' by sysfs
        Input: synaptics-rmi4 - drop a duplicated word
        Input: elan_i2c - add support for high resolution reports
        Input: elan_i2c - do not constantly re-query pattern ID
        Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14
        Input: elan_i2c - handle firmware updated on newer ICs
        Input: elan_i2c - add support for different firmware page sizes
        Input: elan_i2c - fix detecting IAP version on older controllers
        Input: elan_i2c - handle devices with patterns above 1
        ...
      4bcf69e5
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid · b7b8e368
      Linus Torvalds authored
      Pull HID updates from Jiri Kosina:
      
       - fix for some modern devices that return multi-byte battery report,
         from Grant Likely
      
       - fix for devices with Resolution Multiplier, from Peter Hutterer
      
       - device probing speed increase, from Dmitry Torokhov
      
       - ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
      
       - other small assorted fixes and device ID additions
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
        HID: quirks: add NOGET quirk for Logitech GROUP
        HID: Replace HTTP links with HTTPS ones
        HID: udraw-ps3: Replace HTTP links with HTTPS ones
        HID: mcp2221: Replace HTTP links with HTTPS ones
        HID: input: Fix devices that return multiple bytes in battery report
        HID: lenovo: Fix spurious F23 key press report during resume from suspend
        HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard fn_lock support
        HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support
        HID: lenovo: Rename fn_lock sysfs attr handlers to make them generic
        HID: lenovo: Factor out generic parts of the LED code
        HID: lenovo: Merge tpkbd and cptkbd data structures
        HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state
        HID: Wiimote: Treat the d-pad as an analogue stick
        HID: input: do not run GET_REPORT unless there's a Resolution Multiplier
        HID: usbhid: remove redundant assignment to variable retval
        HID: usbhid: do not sleep when opening device
      b7b8e368
    • Colin Ian King's avatar
      ff131eff
    • Steven Rostedt (VMware)'s avatar
      ktest.pl: Change the logic to control the size of the log file emailed · 855d8abd
      Steven Rostedt (VMware) authored
      If the log file for a given test is larger than the max size given then use
      set the seek from the end of the log file instead of from the start of the
      test.
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      855d8abd
    • Jiri Kosina's avatar
      e6b6e19a
    • Jiri Kosina's avatar
      Merge branch 'for-5.9/lenovo' into for-linus · ccac9cec
      Jiri Kosina authored
      - ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
      ccac9cec
    • Jiri Kosina's avatar
      cd6cad55
    • Jiri Kosina's avatar
      Merge branch 'for-5.9/core-v2' into for-linus · a66eebd7
      Jiri Kosina authored
      - fix for some modern devices that return multi-byte battery report, from
        Grant Likely
      - fix for devices with Resolution Multiplier, from Peter Hutterer
      - device probing speed increase, from Dmitry Torokhov
      a66eebd7
  3. 09 Aug, 2020 16 commits
    • Linus Torvalds's avatar
      Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · fc80c51f
      Linus Torvalds authored
      Pull Kbuild updates from Masahiro Yamada:
      
       - run the checker (e.g. sparse) after the compiler
      
       - remove unneeded cc-option tests for old compiler flags
      
       - fix tar-pkg to install dtbs
      
       - introduce ccflags-remove-y and asflags-remove-y syntax
      
       - allow to trace functions in sub-directories of lib/
      
       - introduce hostprogs-always-y and userprogs-always-y syntax
      
       - various Makefile cleanups
      
      * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
        kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
        kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
        kbuild: introduce hostprogs-always-y and userprogs-always-y
        kbuild: sort hostprogs before passing it to ifneq
        kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
        kbuild: Replace HTTP links with HTTPS ones
        kbuild: trace functions in subdirectories of lib/
        kbuild: introduce ccflags-remove-y and asflags-remove-y
        kbuild: do not export LDFLAGS_vmlinux
        kbuild: always create directories of targets
        powerpc/boot: add DTB to 'targets'
        kbuild: buildtar: add dtbs support
        kbuild: remove cc-option test of -ffreestanding
        kbuild: remove cc-option test of -fno-stack-protector
        Revert "kbuild: Create directory for target DTB"
        kbuild: run the checker after the compiler
      fc80c51f
    • Linus Torvalds's avatar
      Merge tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6 · 7a6b6044
      Linus Torvalds authored
      Pull NFS server updates from Chuck Lever:
       "Highlights:
         - Support for user extended attributes on NFS (RFC 8276)
         - Further reduce unnecessary NFSv4 delegation recalls
      
        Notable fixes:
         - Fix recent krb5p regression
         - Address a few resource leaks and a rare NULL dereference
      
        Other:
         - De-duplicate RPC/RDMA error handling and other utility functions
         - Replace storage and display of kernel memory addresses by tracepoints"
      
      * tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6: (38 commits)
        svcrdma: CM event handler clean up
        svcrdma: Remove transport reference counting
        svcrdma: Fix another Receive buffer leak
        SUNRPC: Refresh the show_rqstp_flags() macro
        nfsd: netns.h: delete a duplicated word
        SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()")
        nfsd: avoid a NULL dereference in __cld_pipe_upcall()
        nfsd4: a client's own opens needn't prevent delegations
        nfsd: Use seq_putc() in two functions
        svcrdma: Display chunk completion ID when posting a rw_ctxt
        svcrdma: Record send_ctxt completion ID in trace_svcrdma_post_send()
        svcrdma: Introduce Send completion IDs
        svcrdma: Record Receive completion ID in svc_rdma_decode_rqst
        svcrdma: Introduce Receive completion IDs
        svcrdma: Introduce infrastructure to support completion IDs
        svcrdma: Add common XDR encoders for RDMA and Read segments
        svcrdma: Add common XDR decoders for RDMA and Read segments
        SUNRPC: Add helpers for decoding list discriminators symbolically
        svcrdma: Remove declarations for functions long removed
        svcrdma: Clean up trace_svcrdma_send_failed() tracepoint
        ...
      7a6b6044
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 8d3e09b4
      Linus Torvalds authored
      Pull regset conversion fix from Al Viro:
       "Fix a regression from an unnoticed bisect hazard in the regset series.
      
        A bunch of old (aout, originally) primitives used by coredumps became
        dead code after fdpic conversion to regsets. Removal of that dead code
        had been the first commit in the followups to regset series;
        unfortunately, it happened to hide the bisect hazard on sh (extern for
        fpregs_get() had not been updated in the main series when it should
        have been; followup simply made fpregs_get() static). And without that
        followup commit this bisect hazard became breakage in the mainline"
      Tested-by: default avatarJohn Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
      
      * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        kill unused dump_fpu() instances
      8d3e09b4
    • Linus Torvalds's avatar
      Merge tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl · 9420f1ce
      Linus Torvalds authored
      Pull pin control updates from Linus Walleij:
       "This is the bulk of the pin control changes for the v5.9 kernel
        series:
      
        Core changes:
      
         - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range()
           macro" was put in an immutable branch and merged into the pinctrl
           tree as well. We see these changes also here.
      
         - Improved debug output for pins used as GPIO.
      
        New drivers:
      
         - Ocelot Sparx5 SoC driver.
      
         - Intel Emmitsburg SoC subdriver.
      
         - Intel Tiger Lake-H SoC subdriver.
      
         - Qualcomm PM660 SoC subdriver.
      
         - Renesas SH-PFC R8A774E1 subdriver.
      
        Driver improvements:
      
         - Linear improvement and cleanups of the Intel drivers for
           Cherryview, Lynxpoint, Baytrail etc. Improved locking among other
           things.
      
         - Renesas SH-PFC has added support for RPC pins, groups, and
           functions to r8a77970 and r8a77980.
      
         - The newere Freescale (now NXP) i.MX8 pin controllers have been
           modularized. This is driven by the Google Android GKI initiative I
           think.
      
         - Open drain support for pins on the Qualcomm IPQ4019.
      
         - The Ingenic driver can handle both edges IRQ detection.
      
         - A big slew of documentation fixes all over the place.
      
         - A few irqchip template conversions by yours truly.
      
      * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
        dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
        pinctrl: stmfx: Use irqchip template
        pinctrl: amd: Use irqchip template
        pinctrl: mediatek: fix build for tristate changes
        pinctrl: samsung: Use bank name as irqchip name
        pinctrl: core: print gpio in pins debugfs file
        pinctrl: mediatek: add mt6779 eint support
        pinctrl: mediatek: add pinctrl support for MT6779 SoC
        pinctrl: mediatek: avoid virtual gpio trying to set reg
        pinctrl: mediatek: update pinmux definitions for mt6779
        pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
        pinctrl: mcp23s08: Use irqchip template
        pinctrl: sx150x: Use irqchip template
        dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes
        pinctrl: intel: Add Intel Emmitsburg pin controller support
        pinctl: ti: iodelay: Replace HTTP links with HTTPS ones
        Revert "gpio: omap: handle pin config bias flags"
        pinctrl: single: Use fallthrough pseudo-keyword
        pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword
        pinctrl: baytrail: Use fallthrough pseudo-keyword
        ...
      9420f1ce
    • Linus Torvalds's avatar
      Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux · dec1fbbc
      Linus Torvalds authored
      Pull mtd updates from Miquel Raynal:
       "MTD core changes:
         - Spelling
         - http to https updates
      
        NAND core changes:
         - Drop useless 'depends on' in Kconfig
         - Add an extra level in the Kconfig hierarchy
         - Trivial spellings
         - Dynamic allocation of the interface configurations
         - Dropping the default ONFI timing mode
         - Various cleanup (types, structures, naming, comments)
         - Hide the chip->data_interface indirection
         - Add the generic rb-gpios property
         - Add the ->choose_interface_config() hook
         - Introduce nand_choose_best_sdr_timings()
         - Use default values for tPROG_max and tBERS_max
         - Avoid redefining tR_max and tCCS_min
         - Add a helper to find the closest ONFI mode
         - bcm63xx MTD parsers: simplify CFE detection
      
        Raw NAND controller drivers changes:
         - fsl-upm: Deprecation of specific DT properties
         - fsl_upm: Driver rework and cleanup in favor of ->exec_op()
         - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
         - brcmnand: ECC error handling on EDU transfers
         - brcmnand: Don't default to EDU transfers
         - qcom: Set BAM mode only if not set already
         - qcom: Avoid write to unavailable register
         - gpio: Driver rework in favor of ->exec_op()
         - tango: ->exec_op() conversion
         - mtk: ->exec_op() conversion
      
        Raw NAND chip drivers changes:
         - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
           TC58NVG0S3E, and TC58TEG5DCLTA00
         - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
      
        SPI NOR core changes:
         - Disable Quad Mode in spi_nor_restore().
         - Don't abort BFPT parsing when QER reserved value is used.
         - Add support/update capabilities for few flashes.
         - Drop s70fl01gs flash: it does not support RDSR(05h) which is
           critical for erase/write.
         - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
           the release cycle.
      
        SPI NOR controller drivers changes:
         - Move the cadence-quadspi driver to spi-mem. The series was taken
           through the SPI tree. Merge it also in spi-nor/next to avoid
           conflicts during the release cycle.
         - intel-spi:
            - Add new PCI IDs.
            - Ignore the Write Disable command, the controller doesn't support
              it.
            - Fix performance regression"
      
      * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
        MTD: pfow.h: drop a duplicated word
        MTD: mtd-abi.h: drop a duplicated word
        mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
        mtd: Replace HTTP links with HTTPS ones
        mtd: hyperbus: Replace HTTP links with HTTPS ones
        mtd: revert "spi-nor: intel: provide a range for poll_timout"
        mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
        mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
        mtd: spi-nor: macronix: Add support for mx66u2g45g
        mtd: spi-nor: intel-spi: Simulate WRDI command
        mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
        mtd: spi-nor: Add capability to disable flash quad mode
        mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
        mtd: spi-nor: sfdp: do not make invalid quad enable fatal
        dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
        mtd: rawnand: stm32_fmc2: get resources from parent node
        mtd: rawnand: stm32_fmc2: use regmap APIs
        memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
        dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
        dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
        ...
      dec1fbbc
    • Stephen Rothwell's avatar
    • Masahiro Yamada's avatar
      kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base · 132305b3
      Masahiro Yamada authored
      Commit d26e9414 ("kbuild: no gcc-plugins during cc-option tests")
      was neeeded because scripts/Makefile.gcc-plugins was too early.
      
      This is unneeded by including scripts/Makefile.gcc-plugins last,
      and being careful to not add cc-option tests after it.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      132305b3
    • Masahiro Yamada's avatar
      kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled · e0fe0bbe
      Masahiro Yamada authored
      Currently, the top Makefile includes all of scripts/Makefile.<feature>
      even if the associated CONFIG option is disabled.
      
      Do not include unneeded Makefiles in order to slightly optimize the
      parse stage.
      
      Include $(include-y), and ignore $(include-).
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      e0fe0bbe
    • Masahiro Yamada's avatar
      kbuild: introduce hostprogs-always-y and userprogs-always-y · faabed29
      Masahiro Yamada authored
      To build host programs, you need to add the program names to 'hostprogs'
      to use the necessary build rule, but it is not enough to build them
      because there is no dependency.
      
      There are two types of host programs: built as the prerequisite of
      another (e.g. gen_crc32table in lib/Makefile), or always built when
      Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile).
      
      The latter is typical in Makefiles under scripts/, which contains host
      programs globally used during the kernel build. To build them, you need
      to add them to both 'hostprogs' and 'always-y'.
      
      This commit adds hostprogs-always-y as a shorthand.
      
      The same applies to user programs. net/bpfilter/Makefile builds
      bpfilter_umh on demand, hence always-y is unneeded. In contrast,
      programs under samples/ are added to both 'userprogs' and 'always-y'
      so they are always built when Kbuild visits the Makefiles.
      
      userprogs-always-y works as a shorthand.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      Acked-by: default avatarMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
      faabed29
    • Masahiro Yamada's avatar
      kbuild: sort hostprogs before passing it to ifneq · 85569d19
      Masahiro Yamada authored
      The conditional:
      
        ifneq ($(hostprogs),)
      
      ... is evaluated to true if $(hostprogs) does not contain any word but
      whitespace characters.
      
        ifneq ($(strip $(hostprogs)),)
      
      ... is a safe way to avoid interpreting whitespace as a non-empty value,
      but I'd rather want to use the side-effect of $(sort ...) to do the
      equivalent.
      
      $(sort ...) is used in scripts/Makefile.host in order to drop duplication
      in $(hostprogs). It is also useful to strip excessive spaces.
      
      Move $(sort ...) before evaluating the ifneq.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      85569d19
    • Masahiro Yamada's avatar
      kbuild: move host .so build rules to scripts/gcc-plugins/Makefile · 42640b13
      Masahiro Yamada authored
      The host shared library rules are currently implemented in
      scripts/Makefile.host, but actually GCC-plugin is the only user of
      them. (The VDSO .so files are built for the target by different
      build rules) Hence, they do not need to be treewide available.
      
      Move all the relevant build rules to scripts/gcc-plugins/Makefile.
      
      I also optimized the build steps so *.so is directly built from .c
      because every upstream plugin is compiled from a single source file.
      
      I am still keeping the multi-file plugin support, which Kees Cook
      mentioned might be needed by out-of-tree plugins.
      (https://lkml.org/lkml/2019/1/11/1107)
      
      If the plugin, foo.so, is compiled from two files foo.c and foo2.c,
      then you can do like follows:
      
        foo-objs := foo.o foo2.o
      
      Single-file plugins do not need the *-objs notation.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      Acked-by: default avatarKees Cook <keescook@chromium.org>
      42640b13
    • Alexander A. Klimov's avatar
      kbuild: Replace HTTP links with HTTPS ones · 16a122c7
      Alexander A. Klimov authored
      Rationale:
      Reduces attack surface on kernel devs opening the links for MITM
      as HTTPS traffic is much harder to manipulate.
      
      Deterministic algorithm:
      For each file:
        If not .svg:
          For each line:
            If doesn't contain `\bxmlns\b`:
              For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
      	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
                  If both the HTTP and HTTPS versions
                  return 200 OK and serve the same content:
                    Replace HTTP with HTTPS.
      Signed-off-by: default avatarAlexander A. Klimov <grandmaster@al2klimov.de>
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      16a122c7
    • Masahiro Yamada's avatar
      kbuild: trace functions in subdirectories of lib/ · b16838c6
      Masahiro Yamada authored
      ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE)
      
      exists here in sub-directories of lib/ to keep the behavior of
      commit 2464a609 ("ftrace: do not trace library functions").
      
      Since that commit, not only the objects in lib/ but also the ones in
      the sub-directories are excluded from ftrace (although the commit
      description did not explicitly mention this).
      
      However, most of library functions in sub-directories are not so hot.
      Re-add them to ftrace.
      
      Going forward, only the objects right under lib/ will be excluded.
      
      Cc: Ingo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      Acked-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      b16838c6
    • Masahiro Yamada's avatar
      kbuild: introduce ccflags-remove-y and asflags-remove-y · 15d5761a
      Masahiro Yamada authored
      CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
      object, but there is no convenient way to do that for every object in
      a directory.
      
      Add ccflags-remove-y and asflags-remove-y to make it easily.
      
      Use ccflags-remove-y to clean up some Makefiles.
      
      The add/remove order works as follows:
      
       [1] KBUILD_CFLAGS specifies compiler flags used globally
      
       [2] ccflags-y adds compiler flags for all objects in the
           current Makefile
      
       [3] ccflags-remove-y removes compiler flags for all objects in the
           current Makefile (New feature)
      
       [4] CFLAGS_<file> adds compiler flags per file.
      
       [5] CFLAGS_REMOVE_<file> removes compiler flags per file.
      
      Having [3] before [4] allows us to remove flags from most (but not all)
      objects in the current Makefile.
      
      For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
      from all objects in the directory, then adds it back to
      trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o
      
      The same applies to lib/livepatch/Makefile.
      
      Please note ccflags-remove-y has no effect to the sub-directories.
      In contrast, the previous notation got rid of compiler flags also from
      all the sub-directories.
      
      The following are not affected because they have no sub-directories:
      
        arch/arm/boot/compressed/
        arch/powerpc/xmon/
        arch/sh/
        kernel/trace/
      
      However, lib/ has several sub-directories.
      
      To keep the behavior, I added ccflags-remove-y to all Makefiles
      in subdirectories of lib/, except the following:
      
        lib/vdso/Makefile        - Kbuild does not descend into this Makefile
        lib/raid/test/Makefile   - This is not used for the kernel build
      
      I think commit 2464a609 ("ftrace: do not trace library functions")
      excluded too much. In the next commit, I will remove ccflags-remove-y
      from the sub-directories of lib/.
      Suggested-by: default avatarSami Tolvanen <samitolvanen@google.com>
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      Acked-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
      Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit)
      Tested-by: default avatarAnders Roxell <anders.roxell@linaro.org>
      15d5761a
    • Masahiro Yamada's avatar
      kbuild: do not export LDFLAGS_vmlinux · 3ec8a5b3
      Masahiro Yamada authored
      When you clean the build tree for ARCH=arm, you may see the following
      error message from 'nm' command:
      
      $ make -j24 ARCH=arm clean
        CLEAN   arch/arm/crypto
        CLEAN   arch/arm/kernel
        CLEAN   arch/arm/mach-at91
        CLEAN   arch/arm/mach-omap2
        CLEAN   arch/arm/vdso
        CLEAN   certs
        CLEAN   lib
        CLEAN   usr
        CLEAN   net/wireless
        CLEAN   drivers/firmware/efi/libstub
      nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
      /bin/sh: 1: arithmetic expression: expecting primary: " "
        CLEAN   arch/arm/boot/compressed
        CLEAN   drivers/scsi
        CLEAN   drivers/tty/vt
        CLEAN   arch/arm/boot
        CLEAN   vmlinux.symvers modules.builtin modules.builtin.modinfo
      
      Even if you rerun the same command, the error message will not be
      shown despite vmlinux is already gone.
      
      To reproduce it, the parallel option -j is needed. Single thread
      cleaning always executes 'archclean', 'vmlinuxclean' in this order,
      so vmlinux still exists when arch/arm/boot/compressed/ is cleaned.
      
      Looking at arch/arm/boot/compressed/Makefile does not help understand
      the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are
      assigned with '=' operator, hence, they are not expanded unless used.
      Obviously, 'make clean' does not use them.
      
      In fact, the root cause exists in the top Makefile:
      
        export LDFLAGS_vmlinux
      
      Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in
      arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean
      has a command to execute. This is why the error message shows up only
      when there exist build artifacts in arch/arm/boot/compressed/.
      
      Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile
      will fix it as far as ARCH=arm is concerned, but I think the proper fix
      is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile.
      
      LDFLAGS_vmlinux in the top Makefile contains linker flags for the top
      vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for
      arch/arm/boot/compressed/vmlinux. They just happen to have the same
      variable name, but are used for different purposes. Stop shadowing
      LDFLAGS_vmlinux.
      
      This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a
      command line parameter instead of via an environment variable. LD and
      KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway,
      they must be included in cmd_link-vmlinux to allow if_changed to detect
      the changes in LD or KBUILD_LDFLAGS.
      
      The following Makefiles are not affected:
      
        arch/arm/boot/compressed/Makefile
        arch/h8300/boot/compressed/Makefile
        arch/nios2/boot/compressed/Makefile
        arch/parisc/boot/compressed/Makefile
        arch/s390/boot/compressed/Makefile
        arch/sh/boot/compressed/Makefile
        arch/sh/boot/romimage/Makefile
        arch/x86/boot/compressed/Makefile
      
      They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the
      top Makefile.
      
      We need to take a closer look at the impact to unicore32 and xtensa.
      
      arch/unicore32/boot/compressed/Makefile only uses '+=' operator for
      LDFLAGS_vmlinux. So, the decompressor previously inherited the linker
      flags from the top Makefile.
      
      However, commit 70fac51f ("unicore32 additional architecture files:
      boot process") was merged before commit 1f2bfbd0 ("kbuild: link of
      vmlinux moved to a script"). So, I rather consider this is a bug fix of
      1f2bfbd0.
      
      arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also
      considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux
      when commit 4bedea94 ("[PATCH] xtensa: Architecture support for
      Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux),
      which is now empty.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      Reviewed-by: default avatarNick Desaulniers <ndesaulniers@google.com>
      Tested-by: default avatarNick Desaulniers <ndesaulniers@google.com>
      3ec8a5b3
    • Masahiro Yamada's avatar
      kbuild: always create directories of targets · cc8a51ca
      Masahiro Yamada authored
      Currently, the directories of objects are automatically created
      only for O= builds.
      
      It should not hurt to cater to this for in-tree builds too.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      cc8a51ca
  4. 08 Aug, 2020 8 commits
    • Linus Torvalds's avatar
      Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux · 06a81c1c
      Linus Torvalds authored
      Pull arm64 fixes from Catalin Marinas:
      
       - Fix tegra194-cpufreq module build failure caused by __cpu_logical_map
         not being exported.
      
       - Improve fixed_addresses comment regarding the fixmap buffer sizes.
      
      * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
        arm64: Fix __cpu_logical_map undefined issue
        arm64/fixmap: make notes of fixed_addresses more precisely
      06a81c1c
    • Kefeng Wang's avatar
      arm64: Fix __cpu_logical_map undefined issue · eaecca9e
      Kefeng Wang authored
      The __cpu_logical_map undefined issue occued when the new
      tegra194-cpufreq drvier building as a module.
      
      ERROR: modpost: "__cpu_logical_map" [drivers/cpufreq/tegra194-cpufreq.ko] undefined!
      
      The driver using cpu_logical_map() macro which will expand to
      __cpu_logical_map, we can't access it in a drvier. Let's turn
      cpu_logical_map() into a C wrapper and export it to fix the
      build issue.
      
      Also create a function set_cpu_logical_map(cpu, hwid) when assign
      a value to cpu_logical_map(cpu).
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Signed-off-by: default avatarKefeng Wang <wangkefeng.wang@huawei.com>
      Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      eaecca9e
    • Pingfan Liu's avatar
      arm64/fixmap: make notes of fixed_addresses more precisely · 489577d7
      Pingfan Liu authored
      These 'compile-time allocated' memory buffers can occupy more than one
      page and each enum increment is page-sized. So improve the note about it.
      Signed-off-by: default avatarPingfan Liu <kernelfans@gmail.com>
      Cc: Will Deacon <will@kernel.org>
      Link: https://lore.kernel.org/r/1596460720-19243-1-git-send-email-kernelfans@gmail.com
      To: linux-arm-kernel@lists.infradead.org
      Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      489577d7
    • Linus Torvalds's avatar
      Merge tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmi · 11030fe9
      Linus Torvalds authored
      Pull IPMI updates from Corey Minyard:
       "Minor cleanups to the IPMI driver for 5.9
      
        Nothing of any major consequence. Duplicate code, some missing \n's in
        sysfs files, some documentation and comment changes"
      
      * tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmi:
        ipmi/watchdog: add missing newlines when printing parameters by sysfs
        ipmi: remve duplicate code in __ipmi_bmc_register()
        ipmi: ssif: Remove finished TODO comment about SMBus alert
        Doc: driver-api: ipmi: Add description of alerts_broken module param
      11030fe9
    • Linus Torvalds's avatar
      Merge tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply · 449dc8c9
      Linus Torvalds authored
      Pull power supply and reset updates from Sebastian Reichel:
       "Power-supply core:
         - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification
         - convert simple-battery DT binding to YAML
         - add long-life charging mode
      
       Battery/charger drivers:
         - bq25150: new charger driver
         - bq27xxx: add support for BQ27z561 and BQ28z610
         - max17040: support CAPACITY_ALERT_MIN
         - sbs-battery: add PEC support
         - wilco-ec: support long-life charging mode
         - bq25890: fix DT binding
         - misc. fixes and cleanups
      
       Reset drivers:
         - linkstation: new reset driver"
      
      * tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
        power: supply: wilco_ec: Add long life charging mode
        power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor
        dt-bindings: power: Add BQ28z610 compatible
        power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor
        dt-bindings: power: Add BQ27Z561 compatible
        power: supply: test_power: Fix battery_current initial value
        power: supply: Fix kerneldoc of power_supply_temp2resist_simple()
        power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated()
        dt-bindings: power: Convert battery.txt to battery.yaml
        power: supply: rt5033_battery: Fix error code in rt5033_battery_probe()
        power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN
        power: supply: check if calc_soc succeeded in pm860x_init_battery
        power: supply: bq2xxxx: Replace HTTP links with HTTPS ones
        power: reset: add driver for LinkStation power off
        power: supply: sc27xx: prevent adc * 1000 from overflow
        math64: New DIV_S64_ROUND_CLOSEST helper
        power: fix duplicated words in bq2415x_charger.h
        power: Convert to DEFINE_SHOW_ATTRIBUTE
        power: reset: keystone-reset: Replace HTTP links with HTTPS ones
        power: supply: bq25150 introduce the bq25150
        ...
      449dc8c9
    • Linus Torvalds's avatar
      Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · b79675e1
      Linus Torvalds authored
      Pull misc vfs updates from Al Viro:
       "No common topic whatsoever in those, sorry"
      
      * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        fs: define inode flags using bit numbers
        iov_iter: Move unnecessary inclusion of crypto/hash.h
        dlmfs: clean up dlmfs_file_{read,write}() a bit
      b79675e1
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · d57b2b5b
      Linus Torvalds authored
      Pull mount leak fix from Al Viro:
       "Regression fix for the syscalls-for-init series - fix a leak of a 'struct path'"
      
      * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        fs: fix a struct path leak in path_umount
      d57b2b5b
    • Linus Torvalds's avatar
      Merge tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · 049eb096
      Linus Torvalds authored
      Pull PCI updates from Bjorn Helgaas:
       "Enumeration:
         - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas)
         - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
           Saheed)
         - Align PCIe capability and PCI accessor return values (Bolarinwa
           Olayemi Saheed)
         - Fix pci_create_slot() reference count leak (Qiushi Wu)
         - Announce device after early fixups (Tiezhu Yang)
      
        PCI device hotplug:
         - Make rpadlpar functions static (Wei Yongjun)
      
        Driver binding:
         - Add device even if driver attach failed (Rajat Jain)
      
        Virtualization:
         - xen: Remove redundant initialization of irq (Colin Ian King)
      
        IOMMU:
         - Add pci_pri_supported() to check device or associated PF (Ashok Raj)
         - Release IVRS table in AMD ACS quirk (Hanjun Guo)
         - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng)
         - Treat "external-facing" devices themselves as internal (Rajat Jain)
      
        MSI:
         - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr
           Stankiewicz)
      
        Error handling:
         - Clear PCIe Device Status errors only if OS owns AER (Jonathan
           Cameron)
         - Log correctable errors as warning, not error (Matt Jolly)
         - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc
           Van Oostenryck)
      
        Peer-to-peer DMA:
         - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe)
      
        ASPM:
         - Add missing newline in sysfs 'policy' (Xiongfeng Wang)
      
        Native PCIe controllers:
         - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng)
         - Convert to devm_platform_ioremap_resource() (Dejin Zheng)
         - Remove duplicate error message from devm_pci_remap_cfg_resource()
           callers (Dejin Zheng)
         - Fix runtime PM imbalance on error (Dinghao Liu)
         - Remove dev_err() when handing an error from platform_get_irq()
           (Krzysztof Wilczyński)
         - Use pci_host_bridge.windows list directly instead of splicing in a
           temporary list for cadence, mvebu, host-common (Rob Herring)
         - Use pci_host_probe() instead of open-coding all the pieces for
           altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3,
           versatile, xgene, xilinx, xilinx-nwl (Rob Herring)
         - Default host bridge parent device to the platform device (Rob
           Herring)
         - Use pci_is_root_bus() instead of tracking root bus number
           separately in aardvark, designware (imx6, keystone,
           designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob
           Herring)
         - Set host bridge bus number in pci_scan_root_bus_bridge() instead of
           each driver for aardvark, designware-host, host-common, mediatek,
           rcar, tegra, v3-semi (Rob Herring)
         - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob
           Herring)
         - Set bridge map_irq and swizzle_irq to default functions; drivers
           that don't support legacy IRQs (iproc) need to undo this (Rob
           Herring)
      
        ARM Versatile PCIe controller driver:
         - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring)
      
        Cadence PCIe controller driver:
         - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
           (Kishon Vijay Abraham I)
         - Remove "mem" from reg binding (Kishon Vijay Abraham I)
         - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I)
         - Convert all r/w accessors to perform only 32-bit accesses (Kishon
           Vijay Abraham I)
         - Add support to start link and verify link status (Kishon Vijay
           Abraham I)
         - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I)
         - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I)
         - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon
           Vijay Abraham I)
         - Use bridge resources for outbound window setup (Rob Herring)
         - Remove private bus number and range storage (Rob Herring)
      
        Cadence PCIe endpoint driver:
         - Add MSI-X support (Alan Douglas)
      
        HiSilicon PCIe controller driver:
         - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)
      
        Intel VMD host bridge driver:
         - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick)
      
        Loongson PCIe controller driver:
         - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang)
      
        Marvell Aardvark PCIe controller driver:
         - Indicate error in 'val' when config read fails (Pali Rohár)
         - Don't touch PCIe registers if no card connected (Pali Rohár)
      
        Marvell MVEBU PCIe controller driver:
         - Setup BAR0 in order to fix MSI (Shmuel Hazan)
      
        Microsoft Hyper-V host bridge driver:
         - Fix a timing issue which causes kdump to fail occasionally (Wei Hu)
         - Make some functions static (Wei Yongjun)
      
        NVIDIA Tegra PCIe controller driver:
         - Revert tegra124 raw_violation_fixup (Nicolas Chauvet)
         - Remove PLL power supplies (Thierry Reding)
      
        Qualcomm PCIe controller driver:
         - Change duplicate PCI reset to phy reset (Abhishek Sahu)
         - Add missing ipq806x clocks in PCIe driver (Ansuel Smith)
         - Add missing reset for ipq806x (Ansuel Smith)
         - Add ext reset (Ansuel Smith)
         - Use bulk clk API and assert on error (Ansuel Smith)
         - Add support for tx term offset for rev 2.1.0 (Ansuel Smith)
         - Define some PARF params needed for ipq8064 SoC (Ansuel Smith)
         - Add ipq8064 rev2 variant (Ansuel Smith)
         - Support PCI speed set for ipq806x (Sham Muthayyan)
      
        Renesas R-Car PCIe controller driver:
         - Use devm_pci_alloc_host_bridge() (Rob Herring)
         - Use struct pci_host_bridge.windows list directly (Rob Herring)
         - Convert rcar-gen2 to use modern host bridge probe functions (Rob
           Herring)
      
        TI J721E PCIe driver:
         - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I)
      
        Xilinx Versal CPM PCIe controller driver:
         - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar
           Gogada)
      
        MicroSemi Switchtec management driver:
         - Add missing __iomem and __user tags to fix sparse warnings (Logan
           Gunthorpe)
      
        Miscellaneous:
         - Replace http:// links with https:// (Alexander A. Klimov)
         - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn
           Helgaas)
         - Remove unused pci_lost_interrupt() (Heiner Kallweit)
         - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
         - Fix kerneldoc warnings (Krzysztof Kozlowski)"
      
      * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
        PCI: Fix kerneldoc warnings
        PCI: xilinx-cpm: Add Versal CPM Root Port driver
        PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port
        PCI: Set bridge map_irq and swizzle_irq to default functions
        PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
        PCI: rcar-gen2: Convert to use modern host bridge probe functions
        PCI: Remove dev_err() when handing an error from platform_get_irq()
        MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
        misc: pci_endpoint_test: Add J721E in pci_device_id table
        PCI: j721e: Add TI J721E PCIe driver
        PCI: switchtec: Add missing __iomem tag to fix sparse warnings
        PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
        PCI: rpadlpar: Make functions static
        PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
        PCI: Release IVRS table in AMD ACS quirk
        PCI: Announce device after early fixups
        PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
        PCI: Remove unused pci_lost_interrupt()
        dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
        dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
        ...
      049eb096