- 24 Mar, 2011 40 commits
-
-
Johannes Weiner authored
It is one logical function, no need to have it split up. Also, get rid of some checks from the inner function that ensured the sanity of the outer function. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
Instead of passing a whole struct page_cgroup to this function, let it take only what it really needs from it: the struct mem_cgroup and the page. This has the advantage that reading pc->mem_cgroup is now done at the same place where the ordering rules for this pointer are enforced and explained. It is also in preparation for removing the pc->page backpointer. Signed-off-by:
-
Johannes Weiner authored
This patch series removes the direct page pointer from struct page_cgroup, which saves 20% of per-page memcg memory overhead (Fedora and Ubuntu enable memcg per default, openSUSE apparently too). The node id or section number is encoded in the remaining free bits of pc->flags which allows calculating the corresponding page without the extra pointer. I ran, what I think is, a worst-case microbenchmark that just cats a large sparse file to /dev/null, because it means that walking the LRU list on behalf of per-cgroup reclaim and looking up pages from page_cgroups is happening constantly and at a high rate. But it made no measurable difference. A profile reported a 0.11% share of the new lookup_cgroup_page() function in this benchmark. This patch: All callsites check PCG_USED before passing pc->mem_cgroup, so the latter is never NULL. Signed-off-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
-
Daisuke Nishimura authored
Add checks at allocating or freeing a page whether the page is used (iow, charged) from the view point of memcg. This check may be useful in debugging a problem and we did similar checks before the commit 52d4b9ac(memcg: allocate all page_cgroup at boot). This patch adds some overheads at allocating or freeing memory, so it's enabled only when CONFIG_DEBUG_VM is enabled. Signed-off-by:
-
Johannes Weiner authored
The page_cgroup array is set up before even fork is initialized. I seriously doubt that this code executes before the array is alloc'd. Signed-off-by:
-
Johannes Weiner authored
No callsite ever passes a NULL pointer for a struct mem_cgroup * to the committing function. There is no need to check for it. Signed-off-by:
-
Johannes Weiner authored
These definitions have been unused since '4b3bde4c memcg: remove the overhead associated with the root cgroup'. Signed-off-by:
-
Johannes Weiner authored
Since transparent huge pages, checking whether memory cgroups are below their limits is no longer enough, but the actual amount of chargeable space is important. To not have more than one limit-checking interface, replace memory_cgroup_check_under_limit() and memory_cgroup_check_margin() with a single memory_cgroup_margin() that returns the chargeable space and leaves the comparison to the callsite. Soft limits are now checked the other way round, by using the already existing function that returns the amount by which soft limits are exceeded: res_counter_soft_limit_excess(). Also remove all the corresponding functions on the res_counter side that are now no longer used. Signed-off-by:
-
Johannes Weiner authored
Soft limit reclaim continues until the usage is below the current soft limit, but the documented semantics are actually that soft limit reclaim will push usage back until the soft limits are met again. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Remove initialization of vaiable in caller of memory cgroup function. Actually, it's return value of memcg function but it's initialized in caller. Some memory cgroup uses following style to bring the result of start function to the end function for avoiding races. mem_cgroup_start_A(&(*ptr)) /* Something very complicated can happen here. */ mem_cgroup_end_A(*ptr) In some calls, *ptr should be initialized to NULL be caller. But it's ugly. This patch fixes that *ptr is initialized by _start function. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
res_counter_read_u64 reads u64 value without lock. It's dangerous in a 32bit environment. Add locking. Signed-off-by:
-
Akinobu Mita authored
minix bit operations are only used by minix filesystem and useless by other modules. Because byte order of inode and block bitmaps is different on each architecture like below: m68k: big-endian 16bit indexed bitmaps h8300, microblaze, s390, sparc, m68knommu: big-endian 32 or 64bit indexed bitmaps m32r, mips, sh, xtensa: big-endian 32 or 64bit indexed bitmaps for big-endian mode little-endian bitmaps for little-endian mode Others: little-endian bitmaps In order to move minix bit operations from asm/bitops.h to architecture independent code in minix filesystem, this provides two config options. CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k. CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu, m32r, mips, sh, xtensa). The architectures which always use little-endian bitmaps do not select these options. Finally, we can remove minix bit operations from asm/bitops.h for all architectures. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Greg Ungerer <gerg@uclinux.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hirokazu Takata <takata@linux-m32r.org> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Acked-by:
Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Akinobu Mita authored
As a preparation for moving minix bit operations from asm/bitops.h to architecture independent code in minix filesystem, this removes inline asm from minix_find_first_zero_bit() for m68k. Signed-off-by:
-
Akinobu Mita authored
As the result of conversions, there are no users of ext2 non-atomic bit operations except for ext2 filesystem itself. Now we can put them into architecture independent code in ext2 filesystem, and remove from asm/bitops.h for all architectures. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
Joel Becker <joel.becker@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations to the big-endian architectures which do not have native little-endian bit operations and the little-endian architectures. (alpha, avr32, blackfin, cris, frv, h8300, ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa) These architectures can just include generic implementation (asm-generic/bitops/le.h). Signed-off-by:
Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by:
"H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations by renaming native ext2 bit operations. The ext2 bit operations are kept as wrapper macros using little-endian bit operations to maintain bisectability until the conversions are finished. Signed-off-by:
-
Akinobu Mita authored
This introduces CONFIG_GENERIC_FIND_BIT_LE to tell whether to use generic implementation of find_*_bit_le() in lib/find_next_bit.c or not. For now we select CONFIG_GENERIC_FIND_BIT_LE for all architectures which enable CONFIG_GENERIC_FIND_NEXT_BIT. But m68knommu wants to define own faster find_next_zero_bit_le() and continues using generic find_next_{,zero_}bit(). (CONFIG_GENERIC_FIND_NEXT_BIT and !CONFIG_GENERIC_FIND_BIT_LE) Signed-off-by: -
Akinobu Mita authored
Introduce little-endian bit operations by renaming native ext2 bit operations and changing find_*_bit_le() to take a "void *". The ext2 bit operations are kept as wrapper macros using little-endian bit operations to maintain bisectability until the conversions are finished. Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations by renaming native ext2 bit operations. The ext2 and minix bit operations are kept as wrapper macros using little-endian bit operations to maintain bisectability until the conversions are finished. Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations by renaming native ext2 bit operations. The ext2 bit operations are kept as wrapper macros using little-endian bit operations to maintain bisectability until the conversions are finished. Signed-off-by:
-
Akinobu Mita authored
Introduce little-endian bit operations by renaming existing powerpc native little-endian bit operations and changing them to take any pointer types. Signed-off-by:
-
Akinobu Mita authored
This makes the little-endian bitops take any pointer types by changing the prototypes and adding casts in the preprocessor macros. That would seem to at least make all the filesystem code happier, and they can continue to do just something like #define ext2_set_bit __test_and_set_bit_le (or whatever the exact sequence ends up being). Signed-off-by:
-
Akinobu Mita authored
As a preparation for providing little-endian bitops for all architectures, This renames generic implementation of little-endian bitops. (remove "generic_" prefix and postfix "_le") s/generic_find_next_le_bit/find_next_bit_le/ s/generic_find_next_zero_le_bit/find_next_zero_bit_le/ s/generic_find_first_zero_le_bit/find_first_zero_bit_le/ s/generic___test_and_set_le_bit/__test_and_set_bit_le/ s/generic___test_and_clear_le_bit/__test_and_clear_bit_le/ s/generic_test_le_bit/test_bit_le/ s/generic___set_le_bit/__set_bit_le/ s/generic___clear_le_bit/__clear_bit_le/ s/generic_test_and_set_le_bit/test_and_set_bit_le/ s/generic_test_and_clear_le_bit/test_and_clear_bit_le/ Signed-off-by:
-
Akinobu Mita authored
This patch series introduces little-endian bit operations in asm/bitops.h for all architectures and converts all ext2 non-atomic and minix bit operations to use little-endian bit operations. It enables us to remove ext2 non-atomic and minix bit operations from asm/bitops.h. The reason they should be removed from asm/bitops.h is as follows: For ext2 non-atomic bit operations, they are used for little-endian byte order bitmap access by some filesystems and modules. But using ext2_*() functions on a module other than ext2 filesystem makes some feel strange. For minix bit operations, they are only used by minix filesystem and are useless by other modules. Because byte order of inode and block bitmap is This patch: In order to make the forthcoming changes smaller, this merges macro definisions in asm-generic/bitops/le.h for big-endian and little-endian as much as possible. This also removes unused BITOP_WORD macro. Signed-off-by:
-
Akinobu Mita authored
asm-generic/bitops/le.h is only intended to be included directly from asm-generic/bitops/ext2-non-atomic.h or asm-generic/bitops/minix-le.h which implements generic ext2 or minix bit operations. This stops including asm-generic/bitops/le.h directly and use ext2 non-atomic bit operations instead. It seems odd to use ext2_*_bit() on rds, but it will replaced with __{set,clear,test}_bit_le() after introducing little endian bit operations for all architectures. This indirect step is necessary to maintain bisectability for some architectures which have their own little-endian bit operations. Signed-off-by: -
Akinobu Mita authored
asm-generic/bitops/le.h is only intended to be included directly from asm-generic/bitops/ext2-non-atomic.h or asm-generic/bitops/minix-le.h which implements generic ext2 or minix bit operations. This stops including asm-generic/bitops/le.h directly and use ext2 non-atomic bit operations instead. It seems odd to use ext2_set_bit() on kvm, but it will replaced with __set_bit_le() after introducing little endian bit operations for all architectures. This indirect step is necessary to maintain bisectability for some architectures which have their own little-endian bit operations. Signed-off-by:
-
Andrew Morton authored
fs/adfs/adfs.h: In function 'append_filetype_suffix': fs/adfs/adfs.h:115: warning: comparison is always false due to limited range of data type Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stuart Swales <stuart.swales.croftnuisk@gmail.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Luck, Tony authored
In commit 504f52b5 mm: NUMA aware alloc_task_struct_node() Eric Dumazet forgot a "\". Add it. Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
