- 16 Jan, 2020 17 commits
-
-
Manivannan Sadhasivam authored
Remove fixed clock and source common clock for UART controllers. Link: https://lore.kernel.org/r/20200114040311.6599-3-manivannan.sadhasivam@linaro.orgSigned-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Manivannan Sadhasivam authored
Add clock controller support for Bitmain BM1880 SoC. Link: https://lore.kernel.org/r/20200114040311.6599-2-manivannan.sadhasivam@linaro.orgSigned-off-by:
-
Olof Johansson authored
Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.6 - add DDR clock controller - GPU OPP updates * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP ARM: dts: meson8b: fix the clock controller compatible string ARM: dts: meson8b: add the DDR clock controller ARM: dts: meson8: add the DDR clock controller ARM: dts: meson: provide the XTAL clock using a fixed-clock dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding Link: https://lore.kernel.org/r/7hwo9udi7m.fsf@baylibre.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.6 - new boards: libretech-pc (S912 and S905D versions) - new board: Videostrong KII Pro - A1: add reset controller * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add audio fifo depths arm64: dts: meson: add libretech-pc boards support dt-bindings: arm: amlogic: add libretech-pc bindings arm64: dts: meson: gxl: add i2c C pins arm64: dts: meson-sm1: add video decoder compatible arm64: dts: meson-g12-common: add video decoder node arm64: dts: meson-gxbb: add support for Videostrong KII Pro dt-bindings: arm: amlogic: add Videostrong KII Pro bindings dt-bindings: Add vendor prefix for Videostrong arm64: dts: meson: a1: add pinctrl controller support arm64: dts: meson: add reset controller for Meson-A1 SoC Link: https://lore.kernel.org/r/7hsgkidi3k.fsf@baylibre.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'qcom-dts-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.6 * Add SAW L2 nodes to boot secondary cpus on IPQ40xx * Fix remaining IRQ_TYPE_NONE on APQ8084 * Update tsens node to new style * Add modem remoteproc node to MSM8974 * Move ADSP SMD edge into ADSP remoteproc node for MSM8974 * Add and enable wireless communication subsystem on MSM8974 and Fairphone 2 * Add MSM8974 interconnect provider nodes * Add MSM8974 OCMEM node * tag 'qcom-dts-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx ARM: dts: qcom: apq8084: Remove all instances of IRQ_TYPE_NONE ARM: dts: qcom: apq8084: Change tsens definition to new style ARM: dts: msm8974: Move ADSP smd edge to ADSP PIL ARM: dts: msm8974: Add modem remoteproc node ARM: dts: msm8974-FP2: Introduce the wcnss remoteproc node ARM: dts: msm8974: Introduce the wcnss remoteproc node ARM: dts: qcom: msm8974: add interconnect nodes ARM: dts: qcom: msm8974: add ocmem node Link: https://lore.kernel.org/r/20200113204448.GE3325@yogaSigned-off-by:
-
Olof Johansson authored
Merge tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.6 * Align SDM845 firmware paths with linux-firmware * Make WiFi work on Dragonboard845c * Wire up wakeup controller for SDM845 * Critical thermal interrupt support for SDM845, MSM8996 and MSM8998 * Enable UFS for SM8150 * Add remoteproc enablers and nodes for SM8150 * Add CPUfreq for SM8150 * Add RPMH power-domain node for SM8150 * Cleanup and refactor MSM8996 dts structure * Add initial Inforce Computing IFC6640 dts * Increase MSM8996 core voltage * Fix MSM8996 USB phy settings * Add missing alias for BLSP UART in MSM8998 MTP * Add remoteproc nodes for ADSP, modem and sensor core for MSM8998 * Enable WiFI for MSM8998 * Introduce the SC7180 platform and the IDP development board * Add CPUfreq, QUPs, USB, remoteproc etc for SC7180 * Enable USB OTG for Dragonboard 410c * Add vibrator motor node for PM8916 * Properly specify APCS clocks for MSM8916 * Add CPR and HFPLL for QCS404 * Enable full CPUfreq (with AVS) for QCS404 * tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (88 commits) arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts arm64: dts: qcom: sm8150: Hard code rpmhpd constants arm64: dts: apq8096-db820c: Fix VDD core voltage arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3 arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180 arm64: dts: qcom: msm8996: Fix venus iommu nodename error arm64: dts: qcom: sdm845: add the ufs reset arm64: dts: qcom: sm8150: Fix UFS phy register size arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset arm64: dts: qcom: qcs404: Add CPR and populate OPP table arm64: dts: qcom: qcs404: Add DVFS support arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider arm64: dts: qcom: qcs404: Add HFPLL node arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider arm64: dts: qcom: sc7180: Add rpmh power-domain node arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids arm64: dts: msm8998: thermal: Add critical interrupt support arm64: dts: msm8996: thermal: Add critical interrupt support arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845 ... Link: https://lore.kernel.org/r/20200113204225.GB3325@yogaSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxOlof Johansson authored
AT91 DT for 5.6 - Fix sama5d3 peripheral clock rate range - New boards: Overkiz Smartikz and Kizbox Mini, Microchip SAMA5D27 wlsom1-ek - sama5d2 sdmcc fixes * tag 'at91-5.6-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d3: define clock rate range for tcb1 ARM: dts: at91: sama5d3: fix maximum peripheral clock rates ARM: dts: at91: nattis 2: remove unnecessary include ARM: dts: at91: add smartkiz support and a common kizboxmini dtsi file dt-bindings: arm: at91: Document Kizboxmini and Smartkiz boards binding ARM: dts: at91: rearrange kizbox dts using aliases nodes ARM: dts: at91: sama5d27_som1_ek: add the microchip,sdcal-inverted on sdmmc0 ARM: dts: at91: Reenable UART TX pull-ups ARM: dts: at91: sama5d2: set the sdmmc gclk frequency ARM: dts: at91: sama5d27_som1_ek: add i2c filters properties ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek dt-bindings: ARM: at91: Document SAMA5D27 WLSOM1 and Evaluation Kit ARM: dts: at91: sama5d2: mark secumod as a GPIO controller ARM: dts: at91: sama5d2: disable pwm0 by default Link: https://lore.kernel.org/r/20200113155423.GA1357189@piout.netSigned-off-by:
-
Olof Johansson authored
Merge tag 'v5.5-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - add dynamic power coefficient to the cpu clusters - add jpeg decoder node mt8183: - add node for the Global Command Engine (gce) - add reset cells to the infracfg node * tag 'v5.5-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8183: add reset-cells in infracfg arm64: dts: mt8173: add Mediatek JPEG Codec arm64: dts: add gce node for mt8183 arm64: dts: mt8173: Add dynamic power node. Link: https://lore.kernel.org/r/46c1a244-3f74-8069-6600-8ced02775677@gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt This is our usual set of DT patches for the Allwinner SoCs. It's fairly big this time, but the highlights are: - Enable cpufreq and CPU thermal throttling on the A64 - CLK_CPUX macro usage removed (changed from first pull request) - CSI0 support on the R40 - CSI1 support on the A10 and A20 - SPI support on the R40 - PMU support on the H3, H5, H6 and R40 - MIPI-DSI support on the A64 - PWM support on the H6 - Thermal sensor on the A64, A83t, H3, H5, H6 and R40 - More DT schemas fixes and conversions - New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5, Pine64 H64 Model B, Neutis N5H3 * tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (52 commits) arm64: dts: allwinner: a64: enable DVFS arm64: dts: allwinner: a64: add dtsi with CPU operating points arm64: dts: allwinner: a64: add cooling maps and thermal tripping points arm64: dts: allwinner: a64: add CPU clock to CPU0-3 nodes arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks ARM: dts: sunxi: Use macros for references to CCU clocks arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes arm64: dts: allwinner: a64: pinebook: Fix lid wakeup ARM: dts: sun8i: r40: Add device node for CSI0 ARM: dts: sun7i: Add CSI1 controller and pinmux options ARM: dts: sun4i: Add CSI1 controller and pinmux options ARM: dts: sunxi: Add missing LVDS resets and clocks ARM: dts: sun8i: r40: Use tcon top clock index macros ARM: dts: sun8i: R40: Add PMU node ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K arm64: dts: allwinner: h6: Add thermal sensor and thermal zones ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board arm64: dts: allwinner: a64: Add MIPI DSI pipeline arm64: dts: allwinner: a64: Add thermal sensors and thermal zones ... Link: https://lore.kernel.org/r/20200113095555.GA29848@wens.csie.orgSigned-off-by:
-
Olof Johansson authored
Merge tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree update for 5.6: - New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell board, LX2160A based Solidrun Clearfog CX and Honeycomb boards. - Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC. - Add Crypto CAAM support for i.MX8MM and i.MX8MN. - Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN. - Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus" compatibles from i.MX8M SoCs. - Add DDR controller nodes for i.MX8M devices. - Add EEPROM description for imx8mq-hummingboard-pulse and imx8mq-sr-som boards. - Enable USB1 and TypeC support for imx8mn-evk board. - Add FlexSPI and QSPI support for a few Layerscape SoCs and boards. - Add External MDIO1 node and the two RGMII PHYs connected on LX2160A. - Add missing SAI devices and set SAIs into async mode on LS1028A. - Other random device additions and enhancement for various platforms. * tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits) arm64: dts: imx8mn: Memory node should be in board DT arm64: dts: imx8mm: Memory node should be in board DT arm64: dts: imx8mn: add crypto node arm64: dts: imx8mq-hummingboard-pulse: add eeprom description arm64: dts: imx8mq-sr-som: add eeprom description arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB arm64: dts: freescale: Add devicetree support for Thor96 board arm64: dts: imx8mq-librem5-devkit: add accelerometer and gyro sensor arm64: dts: imx8mm: Add Crypto CAAM support arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell arm64: dts: ls1028a-rdb: enable emmc hs400 mode arm64: dts: ls1028a: Update edma compatible to fit eDMA driver arm64: dts: imx8m: drop "fsl,aips-bus" and "fsl,imx8mq-aips-bus" arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals arm64: dts: lx2160a: add dts for CEX7 platforms arm64: dts: lx2160a: add emdio2 node arm64: dts: ls1028a: put SAIs into async mode arm64: dts: ls1028a: add missing sai nodes arm64: dts: imx8mn-evk: enable usb1 and typec support arm64: dts: imx8mn: Remove setting for IMX8MN_CLK_USB_CORE_REF ... Link: https://lore.kernel.org/r/20200113034006.17430-5-shawnguo@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxOlof Johansson authored
i.MX device tree update for 5.6: - New board support: i.MX6SL based Tolino Shine 3 eBook reader, i.MX7ULP Embedded Artists COM Board, i.MX6Q/DL based Gateworks Ventana Boards. - A couple of series from Andrey Smirnov to enhance i.MX6 RDU2 and VF610 ZII boards. - Add revision in board compatible string for imx6sx-sdb-reva and imx7d-sdb-reva board. - A fixup on imx6sl-tolino-shine3 board to remove incorrect power supply assignment. - Set initial buck regulator modes explicitly for phycore-imx6 board, so that a wrong initial mode set by bootloader does not interfere. - Add Add LCD support for imx7d-pico board. - A couple of patches from Michael Grzeschik to enhance USB Host support on i.MX25. - A couple of patches from Michael Trimarchi to remove duplicate Ethernet PHY reset properties on imx6qdl-icore and switch to phy-handle. - A couple of changes to add extirq node support on LS1021A SoC and make use of it on the LS1021A-TSN board. - A few random device additions and improvements on various boards. * tag 'imx-dt-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (33 commits) ARM: dts: imx: Add GW5912 board support ARM: dts: imx: Add GW5913 board support ARM: dts: imx: Add GW5910 board support ARM: dts: imx: Add GW5907 board support ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property ARM: dts: imx6sl-tolino-shine3: Remove incorrect power supply assignment ARM: dts: imx7d-pico: Add LCD support ARM: dts: imx6qdl-icore: Add fec phy-handle ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods ARM: dts: imx7: Unify temp-grade and speed-grade nodes ARM: dts: imx6: phycore-som: add pmic onkey device ARM: dts: imx51-babbage: Fix the DVI output description ARM: dts: imx6qdl-apalis: mux HDMI CEC pin ARM: dts: imx6sll: add PXP module ARM: dts: colibri-imx6ull: correct wrong pinmuxing and add comments ARM: dts: vf610-zii-scu4-aib: Add node for switch watchdog ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes ARM: dts: vf610-zii-dev-rev-b: Drop redundant I2C properties ARM: dts: phycore-imx6: set buck regulator modes explicitly ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed ... Link: https://lore.kernel.org/r/20200113034006.17430-4-shawnguo@kernel.orgSigned-off-by:
-
Olof Johansson authored
Merge tag 'imx-bindings-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.6: - Add compatibles for boards: i.MX6 SoloX SDB Rev-A Board i.MX7 SabreSD Rev-A Board i.MX6SL based Tolino Shine 3 eBook reader i.MX7ULP Embedded Artists COM Board i.MX8MQ Thor96 Board i.MX8MQ based Google Coral Edge TPU i.MX6Q/DL based Gateworks Ventana Boards LX2160A based QDS and RDB Boards - Add missing imx6sll into fsl-pxp bindings. - Add i.MX8MQ LCDIF compatible into mxsfb bindings. * tag 'imx-bindings-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add Gateworks Ventana i.MX6DL/Q compatibles dt-bindings: arm: Add devicetree binding for Thor96 Board dt-bindings: arm: Add Google Coral Edge TPU entry bindings: fsl: document compatibles of lx2160a boards media: dt-bindings: media: fsl-pxp: add missing imx6sll dt-bindings: arm: fsl: Document i.MX7ULP Embedded Artists COM board dt-bindings: mxsfb: Add compatible for iMX8MQ dt-bindings: arm: fsl: add compatible string for Tolino Shine 3 dt-bindings: arm: imx: Add the i.MX7D-SDB Rev-A board dt-bindings: arm: imx: Add the i.MX6SX-SDB Rev-A board Link: https://lore.kernel.org/r/20200113034006.17430-3-shawnguo@kernel.orgSigned-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt64 for 5.6 (part 1) micro-DPU (uDPU) board changes (Armada 3270 based board): - Fix broken ethernet - Remove i2c-fast-mode property - Indicate that SFP cages support 3W modules SolidRun Clearfog GT 8K (Armada 8040 base board): - Fix switch cpu port node * tag 'mvebu-dt64-5.6-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node arm64: dts: uDPU: SFP cages support 3W modules arm64: dts: uDPU: remove i2c-fast-mode arm64: dts: uDPU: fix broken ethernet Link: https://lore.kernel.org/r/871rs53nu5.fsf@FE-laptopSigned-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt for 5.6 (part 1) - Add support for SolidRun Clearfog GTR (Armada 385 based board) - Move i2c0 to the SoliRrun Microsom dtsi (Armada 38x based) - Add EEPROM node on SoliRrun Microsom (rev 2.1) - Add EEPROM node on SoliRrun ClearFog Pro * tag 'mvebu-dt-5.6-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-388-clearfog: add eeprom ARM: dts: armada-38x-solidrun-microsom: add eeprom ARM: armada-38x-solidrun-microsom: move i2c0 to SOM DT ARM: dts: mvebu: add support for SolidRun Clearfog GTR Link: https://lore.kernel.org/r/874kx13nvh.fsf@FE-laptopSigned-off-by:
-
Olof Johansson authored
Merge tag 'tegra-for-5.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.6-rc1 These patches do some cleanup to existing nodes, add the memory subsystem on Tegra186 and Tegra194 as well as the FUSE and APB MISC nodes on Tegra194. There are also a few additions to the Jetson Nano device tree to enable additional features and the force recovery button on the Jetson AGX Xavier now produces a key code that is actually valid. Finally, an alias is added for the Ethernet card on Jetson TX2 to allow firmware to find it and pass a MAC address via device tree. * tag 'tegra-for-5.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Allow bootloader to configure Ethernet MAC on Jetson TX2 arm64: tegra: Redefine force recovery key on Jetson AGX Xavier arm64: tegra: Enable SDIO on Jetson Nano M.2 Key E arm64: tegra: Enable PWM fan on Jetson Nano arm64: tegra: Add fuse/apbmisc node on Tegra194 arm64: tegra: Make XUSB node consistent with the rest arm64: tegra: Add the memory subsystem on Tegra194 arm64: tegra: Add external memory controller on Tegra186 arm64: tegra: Add interrupt for memory controller on Tegra186 arm64: tegra: Rename EMC on Tegra132 arm64: tegra: Let the EMC hardware use the EMC clock Link: https://lore.kernel.org/r/20200111003553.2411874-7-thierry.reding@gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'tegra-for-5.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.6-rc1 This adds memory timings for the PAZ100 and does some minor cleanup for the external memory controller device tree node on Tegra124. * tag 'tegra-for-5.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: dts: tegra20: paz00: Add memory timings ARM: tegra: Rename EMC on Tegra124 ARM: tegra: Let the EMC hardware use the EMC clock Link: https://lore.kernel.org/r/20200111003553.2411874-6-thierry.reding@gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'tegra-for-5.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.6-rc1 This contains a conversion of the Tegra124 EMC bindings to json-schema as well as the addition of the bindings for the memory subsystem found on Tegra186 and Tegra194. * tag 'tegra-for-5.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: Add Tegra186 memory subsystem dt-bindings: memory: Add Tegra194 memory controller header dt-bindings: memory: Add Tegra186 memory client IDs dt-bindings: memory-controller: Convert Tegra124 EMC to json-schema Link: https://lore.kernel.org/r/20200111003553.2411874-1-thierry.reding@gmail.comSigned-off-by:
-
- 13 Jan, 2020 7 commits
-
-
Rob Clark authored
We want to specify per-device firmware-name, so move the zap node into the .dts file for individual boards/devices. This lets us get rid of the /delete-node/ for cheza, which does not use zap. Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200112195405.1132288-5-robdclark@gmail.comSigned-off-by:
-
Bjorn Andersson authored
I missed the fact that these constants was not yet available, so hard code their values in the dts to make the branch compile on its own. Signed-off-by: -
yong.liang authored
Include mt8183-reset.h and add reset-cells in infracfg in dtsi file Signed-off-by:
yong.liang <yong.liang@mediatek.com> Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com>
-
Vasily Khoruzhick authored
Add CPU regulator and operating points for all the A64-based boards that are currently supported to enable DVFS. Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech>
-
Vasily Khoruzhick authored
Add operating points for A64. These are taken from FEX file from BSP for A64. Signed-off-by:
-
Vasily Khoruzhick authored
Add cooling maps and thermal tripping points to prevent CPU overheating when running at the highest frequency. Tripping points are taken from A33 dts since A64 user manual doesn't mention when we should start throttling. Signed-off-by:
-
Vasily Khoruzhick authored
Add CPU clock to the CPU nodes since it is a prerequisite for enabling DVFS. Signed-off-by:
Chen-Yu Tsai <wens@csie.org>
-
- 12 Jan, 2020 5 commits
-
-
Robert Jones authored
The Gateworks GW5912 is an IMX6 SoC based single board computer with: - IMX6Q or IMX6DL - 32bit DDR3 DRAM - GbE RJ45 front-panel - 4x miniPCIe socket with PCI Gen2, USB2 - 1x miniPCIe socket with PCI Gen2, USB2, mSATA - 1x miniPCIe socket with PCI Gen2, USB2, mezzanine - 10V to 60V DC input barrel jack - 3axis accelerometer (lis2de12) - GPS (ublox ZOE-M8Q) - bi-color front-panel LED - 256MB NAND boot device - nanoSIM/microSD socket (with UHS-I support) - user pushbutton - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - CAN Bus transceiver (mcp2562) - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - off-board SPI connector (1x chip-select) Signed-off-by:
Robert Jones <rjones@gateworks.com> Reviewed-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Robert Jones authored
The Gateworks GW5913 is an IMX6 SoC based single board computer with: - IMX6Q or IMX6DL - 32bit DDR3 DRAM - FEC GbE RJ45 front-panel - 1x miniPCIe socket with PCI Gen2, USB2 - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - 6V to 60V DC input connector - GPS (ublox ZOE-M8Q) - bi-color front-panel LED - 256MB NAND boot device - nanoSIM socket - user pushbutton - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) Signed-off-by:
-
Tim Harvey authored
The Gateworks GW5910 is an IMX6 SoC based single board computer with: - IMX6Q or IMX6DL - 32bit DDR3 DRAM - FEC GbE RJ45 front-panel - 1x miniPCIe socket with PCI Gen2, USB2 - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - 5V to 60V DC input barrel jack - 3axis accelerometer (lis2de12) - GPS (ublox ZOE-M8Q) - bi-color front-panel LED - 256MB NAND boot device - microSD socket (with UHS-I support) - user pushbutton - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6) - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6) - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - off-board SPI connector (1x chip-select) Signed-off-by:
-
Robert Jones authored
The Gateworks GW5907 is an IMX6 SoC based single board computer with: - IMX6Q or IMX6DL - 32bit DDR3 DRAM - FEC GbE Phy - bi-color front-panel LED - 256MB NAND boot device - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - Digital IO expander (pca9555) - Joystick 12bit adc (ads1015) Signed-off-by:
-
Robert Jones authored
Add the compatible enum entries for Gateworks Ventana boards. Signed-off-by:
-
- 11 Jan, 2020 8 commits
-
-
Olof Johansson authored
Merge tag 'samsung-dt-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.6 1. Couple ARM and wcore bus regulators on Exynos542x so higher frequencies could be used with dynamic voltage and frequency scaling. Enable this higher frequencies. 2. Correct the polarity of USB3503 hub GPIOs. 3. Adjust the bus frequencies (scaled with devfreq framework) on Exynos5422 Odroid boards to match values possible to obtain from root PLLs. 4. Add display to Tiny4412 board. 5. Cleanups and minor improvements. * tag 'samsung-dt-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Enable FIMD node and add proper panel node to Tiny4412 ARM: dts: samsung: Rename Samsung and Exynos to lowercase ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids ARM: dts: exynos: Move Exynos5420 bus related OPPs to the Odroid boards DTS ARM: dts: exynos: Correct USB3503 GPIOs polarity ARM: dts: exynos: Add missing CPU frequencies for Exynos5422/5800 ARM: dts: exynos: Add initial data for coupled regulators for Exynos5422/5800 ARM: dts: exynos: Remove syscon compatible from chipid node on Exynos5 Link: https://lore.kernel.org/r/20200110172334.4767-3-krzk@kernel.orgSigned-off-by:
-
Chunyan Zhang authored
We've created a vendor directory for sprd, so move the board bindings to there. Link: https://lore.kernel.org/r/20200110063755.19804-2-zhang.lyra@gmail.comSigned-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Olof Johansson authored
Merge tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards are the Radxa Rock Pi N10 using the VMARC SOM and Dalang carrier board, separate versions for the two rockpro64 hardware revisions which switched a pin between revisions. The rockpro64 also got bluetooth support now. The px30 got a lot of attention with dsi, gpu and thermal support. Similarly the rk3399-roc-pc board also got attention with mtd flash, sdr104 mode, hdmi sound, gpu and a lot of other smaller improvements. Other than that there is a new gpu-cooling device for rk3399 a cpu idle-state for rk3328 and more small improvements across a number of boards. * tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (37 commits) arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc arm64: dts: rockchip: rk3399-hugsun-x99: remove supports-sd and supports-emmc options arm64: dts: rockchip: rk3399-firefly: remove num-slots from &sdio0 node arm64: dts: rockchip: Add PX30 LVDS arm64: dts: rockchip: add dsi controller for px30 arm64: dts: rockchip: Add PX30 DSI DPHY arm64: dts: rockchip: Add RK3328 idle state arm64: dts: rockchip: remove identical &uart0 node from rk3368-lion-haikou arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support ARM: dts: rockchip: Add Radxa Dalang Carrier board arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support dt-bindings: arm: rockchip: Add Rock Pi N10 binding arm64: dts: rockchip: hook up bluetooth at uart0 on rockpro64 arm64: dts: rockchip: enable wifi module at sdio0 on rockpro64 arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards arm64: dts: rockchip: enable the gpu on px30-evb arm64: dts: rockchip: add the gpu for px30 dt-bindings: gpu: mali-bifrost: Add Rockchip PX30 arm64: dts: rockchip: Add GPU cooling device for RK3399 arm64: dts: rockchip: Add regulators for PCIe for Radxa Rock Pi 4 board ... Link: https://lore.kernel.org/r/5115625.yBEeHQkg2z@philSigned-off-by:
-
Olof Johansson authored
Merge tag 'v5.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Pin-name corrections for Veyron-Fievel, bluetooth for a number of veyron boards and additional operating points for rk3288-tinker. * tag 'v5.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Use ABI name for recovery mode pin on veyron fievel/tiger ARM: dts: rockchip: Use ABI name for write protect pin on veyron fievel/tiger ARM: dts: rockchip: Add missing cpu operating points for rk3288-tinker ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron Link: https://lore.kernel.org/r/8215452.dU6eVM2tAM@philSigned-off-by:
-
Amelie Delaunay authored
This enables the driver for STM32 PWR regulators found on stm32mp1. Link: https://lore.kernel.org/r/20200109125531.13610-1-alexandre.torgue@st.comSigned-off-by:
Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by:
Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Olof Johansson authored
Merge tag 'stm32-dt-for-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.6, round 1 Highlights: ---------- MPU part: -Add PWM support on DK2 board. -Add counter support to STM32 timers. -Add support of SDMMC 2&3 instances based on "arm,pl18x". SDMMC2 is connected to eMMC on ED1 board. SDMMC3 is connected to the GPIO extension connector on EV1 & DKx boards. -Add ADC support on ED1 board. -Update devicetree files split to better fit to STM32MP15 SOC & boards diversity. -Fix issues seen during YAML validation. -Enable Ethernet (MAC) TX clock gating during low-power mode. -Enable USB OTG HS support on DKx boards. -Enable USB Host EHCI on DKx boards. MCU part: -Fix issues seen during YAML validation. * tag 'stm32-dt-for-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (37 commits) ARM: dts: stm32: Add power-supply for RGB panel on stm32429i-eval ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco ARM: dts: stm32: change nvmem node name on stm32mp1 ARM: dts: stm32: change nvmem node name on stm32f429 ARM: dts: stm32: update mlahb node according to the bindings on stm32mp15 ARM: dts: stm32: fix dma controller node name on stm32mp157c ARM: dts: stm32: fix dma controller node name on stm32f743 ARM: dts: stm32: fix dma controller node name on stm32f746 ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1 ARM: dts: stm32: enable USB OTG HS on stm32mp15 DKx boards ARM: dts: stm32: enable USB Host (USBH) EHCI controller on stm32mp15 DKx ARM: dts: stm32: enable USBPHYC on stm32mp15 DKx boards ARM: dts: stm32: remove useless clock-names from RTC node on stm32f746 ARM: dts: stm32: remove useless clock-names from RTC node on stm32f429 ARM: dts: stm32: Enable MAC TX clock gating during TX low-power mode on stm32mp15 ARM: dts: stm32: adjust slew rate for Ethernet on stm32mp15 ARM: dts: stm32: remove syscfg clock on stm32mp15 ethernet ARM: dts: stm32: remove "@" and "_" from stm32f7 pinmux groups ARM: dts: stm32: remove "@" and "_" from stm32f4 pinmux groups ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 DT diversity ... Link: https://lore.kernel.org/r/39df1dee-3c9f-cd35-bc55-a71223e07100@st.comSigned-off-by:
-
git://github.com/hisilicon/linux-hisiOlof Johansson authored
ARM64: DT: Hisilicon SoCs DT updates for 5.6 - Add remote control map name of the IR device for the hi3798cv200 poplar board - Correct the PCIe bus range setting for the hi3798cv200 * tag 'hisi-arm64-dt-for-5.6' of git://github.com/hisilicon/linux-hisi: arm64: dts: hi3798cv200: correct PCIe 'bus-range' setting arm64: dts: hi3798cv200-poplar: add linux,rc-map-name for IR Link: https://lore.kernel.org/r/5E169EDE.8020809@hisilicon.comSigned-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.6, please pull the following: - Stephan adds support for the HWRNG on 2711 (Raspberry Pi 4) which is different than the previous Pi chips - Florian switches the BCM956265HR board to use the hardware I2C controllers for interfacing with the SFPs * tag 'arm-soc/for-5.6/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711: Enable HWRNG support ARM: dts: bcm2835: Move rng definition to common location ARM: dts: NSP: Use hardware I2C for BCM958625HR Link: https://lore.kernel.org/r/20200108191114.15987-1-f.fainelli@gmail.comSigned-off-by:
-
- 10 Jan, 2020 3 commits
-
-
Alexandre Belloni authored
The clock rate range for the TCB1 clock is missing. define it in the device tree. Reported-by:
Karl Rudbæk Olsen <karl@micro-technic.com> Fixes: d2e8190b ("ARM: at91/dt: define sama5d3 clocks") Link: https://lore.kernel.org/r/20200110172007.1253659-2-alexandre.belloni@bootlin.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Alexandre Belloni authored
Currently the maximum rate for peripheral clock is calculated based on a typical 133MHz MCK. The maximum frequency is defined in the datasheet as a ratio to MCK. Some sama5d3 platforms are using a 166MHz MCK. Update the device trees to match the maximum rate based on 166MHz. Reported-by:
-
Alexandre Belloni authored
sama5d3_lcd.dtsi is already included by sama5d31.dtsi, itself included by at91-linea.dtsi. Link: https://lore.kernel.org/r/20191229203503.336593-1-alexandre.belloni@bootlin.comSigned-off-by:
-
