Add core functionality required to support police action in the policy
engine.

The utilized hardware policers are stored in a hash table keyed by the
flow action index. This allows to support policer sharing between
multiple ACL rules.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the policy engine, each ACL rule points to an action block where the
ACL actions are stored. Each action block consists of one or more action
sets. Each action set holds one or more individual actions, up to a
maximum queried from the device. For example:

                        Action set #1               Action set #2

+----------+          +--------------+            +--------------+
| ACL rule +---------->  Action #1   |      +----->  Action #4   |
+----------+          +--------------+      |     +--------------+
                      |  Action #2   |      |     |  Action #5   |
                      +--------------+      |     +--------------+
                      |  Action #3   +------+     |              |
                      +--------------+            +--------------+

                      <---------+ Action block +----------------->

The hardware has a limitation that prevents a policing action
(MLXSW_AFA_POLCNT_CODE when used with a policer, not a counter) from
being configured in the same action set with a trap action (i.e.,
MLXSW_AFA_TRAP_CODE or MLXSW_AFA_TRAPWU_CODE). Note that the latter used
to implement multiple actions: 'trap', 'mirred', 'drop'.

Work around this limitation by teaching mlxsw_afa_block_append_action()
to create a new action set not only when there is no more room left in
the current set, but also when there is a conflict between previously
mentioned actions.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Expose via devlink-resource the maximum number of single-rate policers
and their current occupancy. Example:

$ devlink resource show pci/0000:01:00.0
...
  name global_policers size 1000 unit entry dpipe_tables none
    resources:
      name single_rate_policers size 968 occ 0 unit entry dpipe_tables none
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add common code to handle all policer-related functionality in mlxsw.
Currently, only policer for policy engines are supported, but it in the
future more policer families will be added such as CPU (trap) policers
and storm control policers.

The API allows different modules to add / delete policers and read their
drop counter.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a resource identifier for maximum global policers so that it could
be later used to query the information from firmware.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add policer bandwidth limits for both rate and burst size so that they
could be enforced by a later patch.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

add support to update firmware by the devlink flashing API
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove the unnecessary label from dn_dev_ioctl() and make its error
handling simpler to read.
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The concept of timestamping DSA switches / Ethernet PHYs is becoming
more and more popular, however the Linux kernel timestamping code has
evolved quite organically and there's layers upon layers of new and old
code that need to work together for things to behave as expected.

Add this chapter to explain what the overall goals are.

Loosely based upon this email discussion plus some more info:
https://lkml.org/lkml/2020/7/6/481Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

commit d565b0a1 ("net: Add Generic Receive Offload infrastructure")
left behind this, remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 263e1201 ("mptcp: consolidate synack processing.")
left behind this, remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not used since commit 09c75704 ("xfrm: remove flow cache")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

They are not used any more since commit b1edeb10 ("netlabel: Replace
protocol/NetLabel linking with refrerence counts")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
udp_tunnel: NIC RX port offload infrastructure

This set of patches converts further drivers to use the new
infrastructure to UDP tunnel port offload merged in
commit 0ea46047 ("Merge branch 'udp_tunnel-add-NIC-RX-port-offload-infrastructure'").

v3:
 - fix a W=1 build warning in qede.
v2:
 - fix a W=1 build warning in xgbe,
 - expand the size of tables for lio.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Straightforward conversion to new infra, 1 VxLAN port, handler
may sleep.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Covert to new infra. Looks like this driver was not doing
ref counting, and sleeping in the callback.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Straightforward conversion to new infra. Driver restores info
after close/open cycle by calling its internal restore function
so just use that, no need for udp_tunnel_nic_reset_ntf() here.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Carbon copy of the previous change.

This driver is just a super thin FW interface, but Derek let us
know the table has 1024 entries.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver is just a super thin FW interface, but Derek let us
know the table has 1024 entries.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to new infra, now the refcounting will be correct,
and driver gets port replay of other ports when offloaded
port gets removed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to new infra, this driver is very simple. The check of
adapter->rawf_cnt in cxgb_udp_tunnel_unset_port() is kept from
the old port deletion function but it's dodgy since nothing ever
updates that member once its set during init. Also .set_port
callback always adds the raw mac filter..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fairly straightforward conversion - no need to keep track
of the use count, and replay when ports get removed, also
callbacks can just sleep.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use of the new udp_tunnel_nic infra. Don't clear the features
when VxLAN port is not present to make all drivers behave the same.
Driver will now (until we address the problem in the core) leave
the RX UDP tunnel feature always on, since this is what most drivers
do.

Remove the list of VxLAN ports, just program the one core told us to.

The driver seem to want to clear the VxLAN ports on close but it
doesn't seem to flush the port list properly so it'd get wrong
use counts after close/open. Again since it calls its own open
handler we need the reset notification hack.

v2:
 - fix kbuild warning
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of looping though the list of ports just check
if the geometry of the packet is correct for VxLAN.
HW most likely doesn't care about the exact port, anyway,
since only first port is actually offloaded, and this way
we won't have to maintain the port list at all.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert be2net to new udp_tunnel_nic infra. NIC only takes one VxLAN
port. Remove the port tracking using a list. The warning in
be_work_del_vxlan_port() looked suspicious - like the driver expected
ports to be removed in order of addition.

be2net unregisters ports when going down and re-registers them (for
skyhawk) when coming up, but it never checks if the device is up
in the add_port / del_port callbacks. Make it use
UDP_TUNNEL_NIC_INFO_OPEN_ONLY. Sadly this driver calls its own
open/close functions directly so the udp_tunnel_nic_reset_ntf()
workaround is needed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFP conversion is pretty straightforward. We want to be able
to sleep, and only get callbacks when the device is open.

NFP did not ask for port replay when ports were removed, now
new infra will provide this feature for free.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-07-14

The following pull-request contains BPF updates for your *net-next* tree.

We've added 21 non-merge commits during the last 1 day(s) which contain
a total of 20 files changed, 308 insertions(+), 279 deletions(-).

The main changes are:

1) Fix selftests/bpf build, from Alexei.

2) Fix resolve_btfids build issues, from Jiri.

3) Pull usermode-driver-cleanup set, from Eric.

4) Two minor fixes to bpfilter, from Alexei and Masahiro.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'ksz_alloc_desc()', GFP_KERNEL can be used
because a few lines below, GFP_KERNEL is also used in the
'ksz_alloc_soft_desc()' calls.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: add support for RTL8125B

This series adds support for RTL8125B rev.b.
Tested with a Delock 89564 PCIe card.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for RTL8125B rev.b. In my tests 2.5Gbps worked well
w/o firmware, however for a stable link at 1Gbps firmware revision
0.0.2 is needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Realtek assigned a new PHY ID for the RTL8125B-internal PHY.
It's however compatible with the RTL8125A-internal PHY.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: updates 2020-07-14

please apply the following patch series for qeth to netdev's net-next tree.

This brings a mix of cleanups for various parts of the control code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We're not modifying these data blobs, so mark them as constant.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To keep track of the addresses programmed from an RX modeset, we have
two separate hashtables (L2: mac_htable, L3: ip_mc_htable).

These are never used at the same time, so unify them into a single
rx_mode_addrs hashtable.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While initially just trying to fix up the indentation, condense a few
lines and get rid of a goto label.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the correct struct member instead of hardcoding its offset.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the correct helper for casting to a user pointer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the cmd IO path has learned to propagate errnos back to its callers,
let them deal with errors instead of trying to restore their previous
configuration from within the IO error path.

Also translate the HW error to a meaningful errno, instead of returning
-EIO for all cases (and don't map this to -EOPNOTSUPP later on...).

While at it, add a READ_ONCE() / WRITE_ONCE() pair to ensure that the
data path always sees a valid isolation mode during reconfiguration.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When qeth_set_access_ctrl_online() is called during the device's
initialization and discovers that isolation mode isn't supported, don't
clear the user's currently configured mode.
They intentionally choose to operate the device in this specific mode,
and degrading the isolation is not an option.

Only adjust the configuration when called via sysfs (ie. fallback = 1),
and here follow the common pattern and restore it from prev_isolation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>