The API convention makes it that a given MDIO bus reset should be able
to access PHY devices in its reset() callback and perform additional
MDIO accesses in order to bring the bus and PHYs in a working state.

Commit 69226896 ("mdio_bus: Issue GPIO RESET to PHYs.") broke that
contract by first calling bus->reset() and then release all PHYs from
reset using their shared GPIO line, so restore the expected
functionality here.

Fixes: 69226896 ("mdio_bus: Issue GPIO RESET to PHYs.")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We must accumulate into reg->aux_off rather than use a plain assignment.

Add a test for this situation to test_align.
Reported-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The macro tipc_wait_for_cond() is embedding the macro sk_wait_event()
to fulfil its task. The latter, in turn, is evaluating the stated
condition outside the socket lock context. This is problematic if
the condition is accessing non-trivial data structures which may be
altered by incoming interrupts, as is the case with the cong_links()
linked list, used by socket to keep track of the current set of
congested links. We sometimes see crashes when this list is accessed
by a condition function at the same time as a SOCK_WAKEUP interrupt
is removing an element from the list.

We fix this by expanding selected parts of sk_wait_event() into the
outer macro, while ensuring that all evaluations of a given condition
are performed under socket lock protection.

Fixes: commit 365ad353 ("tipc: reduce risk of user starvation during link congestion")
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shahid Habib noticed that when xdp1 was killed from a different console the xdp
program was not cleaned-up properly in the kernel and it continued to forward
traffic.

Most of the applications in samples/bpf cleanup properly, but only when getting
SIGINT.  Since kill defaults to using SIGTERM, add support to cleanup when the
application receives either SIGINT or SIGTERM.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Reported-by: Shahid Habib <shahid.habib@broadcom.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error status err is initialized as zero and then being checked
several times to see if it is less than zero even when it has not
been updated.  It may seem that the err should be assigned to the
return code of the call to the various *offload_en_set calls and
then we check for failure, however, these functions are void and
never actually return any status.

Since these error checks are redundant we can remove these
as well as err and the error exit label err_exit.

Detected by CoverityScan, CID#1398313 and CID#1398306 ("Logically
dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Acked-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Manish Chopra says:

====================
qlcnic: Bug fix and update version

This series has one fix and bumps up driver version.
Please consider applying to "net"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Bumping up the version as couple of fixes added after 5.3.65
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently driver returns error on speed configurations
for 83xx adapter's non XGBE ports, due to this link doesn't
come up on the ports using 1000Base-T as a connector with
autoneg disabled. This patch fixes this with initializing
appropriate port type based on queried module/connector
types from hardware before any speed/autoneg configuration.
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unavoidable crashes in netfront_resume() and netback_changed() after a
previous fail in talk_to_netback() (e.g. when we fail to read MAC from
xenstore) were discovered. The failure path in talk_to_netback() does
unregister/free for netdev but we don't reset drvdata and we try accessing
it after resume.

Fix the bug by removing the whole xen device completely with
device_unregister(), this guarantees we won't have any calls into netfront
after a failure.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 59cc1f61 ("net: sched: convert qdisc linked list to
hashtable") we missed the opportunity to considerably speed up
tc_dump_tclass_root() if a qdisc handle is provided by user.

Instead of iterating all the qdiscs, use qdisc_match_from_root()
to directly get the one we look for.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a bug in splitting an SKB during SACK
processing. Specifically if an skb contains multiple
packets and is only partially sacked in the higher sequences,
tcp_match_sack_to_skb() splits the skb and marks the second fragment
as SACKed.

The current code further attempts rounding up the first fragment
to MSS boundaries. But it misses a boundary condition when the
rounded-up fragment size (pkt_len) is exactly skb size.  Spliting
such an skb is pointless and causses a kernel warning and aborts
the SACK processing. This patch universally checks such over-split
before calling tcp_fragment to prevent these unnecessary warnings.

Fixes: adb92db8 ("tcp: Make SACK code to split only at mss boundaries")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I should have known that lowering skb->truesize was dangerous :/

In case packets are not leaving the host via a standard Ethernet device,
but looped back to local sockets, bad things can happen, as reported
by Michael Madsen ( https://bugzilla.kernel.org/show_bug.cgi?id=195713 )

So instead of tweaking skb->truesize, lets change skb->destructor
and keep a reference on the owner socket via its sk_refcnt.

Fixes: f2f872f9 ("netem: Introduce skb_orphan_partial() helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Michael Madsen <mkm@nabto.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Two generic xdp related follow-ups

Two follow-ups for the generic XDP API, would be great if
both could still be considered, since the XDP API is not
frozen yet. For details please see individual patches.

v1 -> v2:
  - Implemented feedback from Jakub Kicinski (reusing
    attribute on dump), thanks!
  - Rest as is.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While working on the iproute2 generic XDP frontend, I noticed that
as of right now it's possible to have native *and* generic XDP
programs loaded both at the same time for the case when a driver
supports native XDP.

The intended model for generic XDP from b5cdae32 ("net: Generic
XDP") is, however, that only one out of the two can be present at
once which is also indicated as such in the XDP netlink dump part.
The main rationale for generic XDP is to ease accessibility (in
case a driver does not yet have XDP support) and to generically
provide a semantical model as an example for driver developers
wanting to add XDP support. The generic XDP option for an XDP
aware driver can still be useful for comparing and testing both
implementations.

However, it is not intended to have a second XDP processing stage
or layer with exactly the same functionality of the first native
stage. Only reason could be to have a partial fallback for future
XDP features that are not supported yet in the native implementation
and we probably also shouldn't strive for such fallback and instead
encourage native feature support in the first place. Given there's
currently no such fallback issue or use case, lets not go there yet
if we don't need to.

Therefore, change semantics for loading XDP and bail out if the
user tries to load a generic XDP program when a native one is
present and vice versa. Another alternative to bailing out would
be to handle the transition from one flavor to another gracefully,
but that would require to bring the device down, exchange both
types of programs, and bring it up again in order to avoid a tiny
window where a packet could hit both hooks. Given this complicates
the logic for just a debugging feature in the native case, I went
with the simpler variant.

For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae32
and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all
or just a subset of flags that were used for loading the XDP prog
is suboptimal in the long run since not all flags are useful for
dumping and if we start to reuse the same flag definitions for
load and dump, then we'll waste bit space. What we really just
want is to dump the mode for now.

Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0),
a program is running at the native driver layer (1). Thus, add a
mode that says that a program is running at generic XDP layer (2).
Applications will handle this fine in that older binaries will
just indicate that something is attached at XDP layer, effectively
this is similar to IFLA_XDP_FLAGS attr that we would have had
modulo the redundancy.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit b5cdae32 ("net: Generic XDP") we automatically fall
back to a generic XDP variant if the driver does not support native
XDP. Allow for an option where the user can specify that always the
native XDP variant should be selected and in case it's not supported
by a driver, just bail out.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We do not want to use the architecture's type.h header when
building BPF programs which are always 64-bit.
Signed-off-by: David S. Miller <davem@davemloft.net>

David S. Miller says:

====================
bpf: Add alignment tracker to verifier.

First we add the alignment tracking logic to the verifier.

Next, we work on building up infrastructure to facilitate regression
testing of this facility.

Finally, we add the "test_align" test case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>

This allows a test case to load a BPF program and unconditionally
acquire the verifier log.

It also allows specification of the strict alignment flag.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>

Add a new field, "prog_flags", and an initial flag value
BPF_F_STRICT_ALIGNMENT.

When set, the verifier will enforce strict pointer alignment
regardless of the setting of CONFIG_EFFICIENT_UNALIGNED_ACCESS.

The verifier, in this mode, will also use a fixed value of "2" in
place of NET_IP_ALIGN.

This facilitates test cases that will exercise and validate this part
of the verifier even when run on architectures where alignment doesn't
matter.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>

If log_level > 1, do a state dump every instruction and emit it in
a more compact way (without a leading newline).

This will facilitate more sophisticated test cases which inspect the
verifier log for register state.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>

Currently if we add only constant values to pointers we can fully
validate the alignment, and properly check if we need to reject the
program on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.

However, once an unknown value is introduced we only allow byte sized
memory accesses which is too restrictive.

Add logic to track the known minimum alignment of register values,
and propagate this state into registers containing pointers.

The most common paradigm that makes use of this new logic is computing
the transport header using the IP header length field.  For example:

	struct ethhdr *ep = skb->data;
	struct iphdr *iph = (struct iphdr *) (ep + 1);
	struct tcphdr *th;
 ...
	n = iph->ihl;
	th = ((void *)iph + (n * 4));
	port = th->dest;

The existing code will reject the load of th->dest because it cannot
validate that the alignment is at least 2 once "n * 4" is added the
the packet pointer.

In the new code, the register holding "n * 4" will have a reg->min_align
value of 4, because any value multiplied by 4 will be at least 4 byte
aligned.  (actually, the eBPF code emitted by the compiler in this case
is most likely to use a shift left by 2, but the end result is identical)

At the critical addition:

	th = ((void *)iph + (n * 4));

The register holding 'th' will start with reg->off value of 14.  The
pointer addition will transform that reg into something that looks like:

	reg->aux_off = 14
	reg->aux_off_align = 4

Next, the verifier will look at the th->dest load, and it will see
a load offset of 2, and first check:

	if (reg->aux_off_align % size)

which will pass because aux_off_align is 4.  reg_off will be computed:

	reg_off = reg->off;
 ...
		reg_off += reg->aux_off;

plus we have off==2, and it will thus check:

	if ((NET_IP_ALIGN + reg_off + off) % size != 0)

which evaluates to:

	if ((NET_IP_ALIGN + 14 + 2) % size != 0)

On strict alignment architectures, NET_IP_ALIGN is 2, thus:

	if ((2 + 14 + 2) % size != 0)

which passes.

These pointer transformations and checks work regardless of whether
the constant offset or the variable with known alignment is added
first to the pointer register.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>

Shubham was recently asking on netdev why in arm64 JIT we don't multiply
the index for accessing the tail call map by 8. That led me into testing
out arm64 JIT wrt tail calls and it turned out I got a NULL pointer
dereference on the tail call.

The buggy access is at:

  prog = array->ptrs[index];
  if (prog == NULL)
      goto out;

  [...]
  00000060:  d2800e0a  mov x10, #0x70 // #112
  00000064:  f86a682a  ldr x10, [x1,x10]
  00000068:  f862694b  ldr x11, [x10,x2]
  0000006c:  b40000ab  cbz x11, 0x00000080
  [...]

The code triggering the crash is f862694b. x1 at the time contains the
address of the bpf array, x10 offsetof(struct bpf_array, ptrs). Meaning,
above we load the pointer to the program at map slot 0 into x10. x10
can then be NULL if the slot is not occupied, which we later on try to
access with a user given offset in x2 that is the map index.

Fix this by emitting the following instead:

  [...]
  00000060:  d2800e0a  mov x10, #0x70 // #112
  00000064:  8b0a002a  add x10, x1, x10
  00000068:  d37df04b  lsl x11, x2, #3
  0000006c:  f86b694b  ldr x11, [x10,x11]
  00000070:  b40000ab  cbz x11, 0x00000084
  [...]

This basically adds the offset to ptrs to the base address of the bpf
array we got and we later on access the map with an index * 8 offset
relative to that. The tail call map itself is basically one large area
with meta data at the head followed by the array of prog pointers.
This makes tail calls working again, tested on Cavium ThunderX ARMv8.

Fixes: ddb55992 ("arm64: bpf: implement bpf_tail_call() helper")
Reported-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix error path while dma open channel issue. Also, no need to check output
on NULL if it's never returned.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/net fixes

some qeth fixes for -net, the OSM/OSN one being the most crucial.
Please also queue these up for stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 5f78e29c ("qeth: optimize IP handling in rx_mode callback")
added new hash tables, but missed to initialize them.

Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Access card->dev only after checking whether's its valid.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit b4d72c08 ("qeth: bridgeport support - basic control")
broke the support for OSM and OSN devices as follows:

As OSM and OSN are L2 only, qeth_core_probe_device() does an early
setup by loading the l2 discipline and calling qeth_l2_probe_device().
In this context, adding the l2-specific bridgeport sysfs attributes
via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c,
since the basic sysfs infrastructure for the device hasn't been
established yet.

Note that OSN actually has its own unique sysfs attributes
(qeth_osn_devtype), so the additional attributes shouldn't be created
at all.
For OSM, add a new qeth_l2_devtype that contains all the common
and l2-specific sysfs attributes.
When qeth_core_probe_device() does early setup for OSM or OSN, assign
the corresponding devtype so that the ccwgroup probe code creates the
full set of sysfs attributes.
This allows us to skip qeth_l2_create_device_attributes() in case
of an early setup.

Any device that can't do early setup will initially have only the
generic sysfs attributes, and when it's probed later
qeth_l2_probe_device() adds the l2-specific attributes.

If an early-setup device is removed (by calling ccwgroup_ungroup()),
device_unregister() will - using the devtype - delete the
l2-specific attributes before qeth_l2_remove_device() is called.
So make sure to not remove them twice.

What complicates the issue is that qeth_l2_probe_device() and
qeth_l2_remove_device() is also called on a device when its
layer2 attribute changes (ie. its layer mode is switched).
For early-setup devices this wouldn't work properly - we wouldn't
remove the l2-specific attributes when switching to L3.
But switching the layer mode doesn't actually make any sense;
we already decided that the device can only operate in L2!
So just refuse to switch the layer mode on such devices. Note that
OSN doesn't have a layer2 attribute, so we only need to special-case
OSM.

Based on an initial patch by Ursula Braun.

Fixes: b4d72c08 ("qeth: bridgeport support - basic control")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When setting up the device from within the layer discipline's
probe routine, creating the layer-specific sysfs attributes can fail.
Report this error back to the caller, and handle it by
releasing the layer discipline.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
[jwi: updated commit msg, moved an OSN change to a subsequent patch]
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a potential unnecessary refcount decrement on error path of
put_device(&pb->mii_bus->dev), as it is possible to avoid the
of_mdio_find_bus() call if mux_bus is specified by the calling function.

The same put_device() is not called in the error path if the
devm_kzalloc of pb fails.  This caused the variable used in the
put_device() to be changed, as the pb pointer was obviously not set up.

There is an unnecessary of_node_get() on child_bus_node if the
of_mdiobus_register() is successful, as the
for_each_available_child_of_node() automatically increments this.
Thus the refcount on this node will always be +1 more than it should be.

There is no of_node_put() on child_bus_node if the of_mdiobus_register()
call fails.

Finally, it is lacking devm_kfree() of pb in the error path.  While this
might not be technically necessary, it was present in other parts of the
function.  So, I am adding it where necessary to make it uniform.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: f20e6657 ("mdio: mux: Enhanced MDIO mux framework for integrated multiplexers")
Fixes: 0ca2997d ("netdev/of/phy: Add MDIO bus multiplexer support.")
Signed-off-by: David S. Miller <davem@davemloft.net>

Like commit 657831ff ("dccp/tcp: do not inherit mc_list from parent")
we should clear ipv6_mc_list etc. for IPv6 sockets too.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently rcode is being initialized to NX_RCODE_SUCCESS and later it
is checked to see if it is not NX_RCODE_SUCCESS which is never true. It
appears that there is an unintentional missing assignment of rcode from
the return of the call to netxen_issue_cmd() that was dropped in
an earlier fix, so add it in.

Detected by CoverityScan, CID#401900 ("Logically dead code")

Fixes: 2dcd5d95 ("netxen_nic: fix cdrp race condition")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The qca_spi driver causes alignment issues on ARM devices.
So fix this by using netdev_alloc_skb_ip_align().
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>

The current codes only deal with the case that the skb is dropped, it
may meet one use-after-free issue when NF_HOOK returns 0 that means
the skb is stolen by one netfilter rule or hook.

When one netfilter rule or hook stoles the skb and return NF_STOLEN,
it means the skb is taken by the rule, and other modules should not
touch this skb ever. Maybe the skb is queued or freed directly by the
rule.

Now uses the nf_hook instead of NF_HOOK to get the result of netfilter,
and check the return value of nf_hook. Only when its value equals 1, it
means the skb could go ahead. Or reset the skb as NULL.

BTW, because vrf_rcv_finish is empty function, so needn't invoke it
even though nf_hook returns 1. But we need to modify vrf_rcv_finish
to deal with the NF_STOLEN case.

There are two cases when skb is stolen.
1. The skb is stolen and freed directly.
   There is nothing we need to do, and vrf_rcv_finish isn't invoked.
2. The skb is queued and reinjected again.
   The vrf_rcv_finish would be invoked as okfn, so need to free the
   skb in it.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull IDE updates from David Miller:
 "Two small cleanups in the IDE layer"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: don't call memcpy with the same source and destination
  ide: use setup_timer

Pull sparc updates from David Miller:
 "sparc changes, including a bug fix for handling exceptions during
  bzero on some sparc64 cpus"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: fix fault handling in NGbzero.S and GENbzero.S
  sparc: use memdup_user_nul in sun4m LED driver
  sparc: Remove redundant tests in boot_flags_init().

Pull networking fixes from David Miller:

 1) Fix multiqueue in stmmac driver on PCI, from Andy Shevchenko.

 2) cdc_ncm doesn't actually fully zero out the padding area is
    allocates on TX, from Jim Baxter.

 3) Don't leak map addresses in BPF verifier, from Daniel Borkmann.

 4) If we randomize TCP timestamps, we have to do it everywhere
    including SYN cookies. From Eric Dumazet.

 5) Fix "ethtool -S" crash in aquantia driver, from Pavel Belous.

 6) Fix allocation size for ntp filter bitmap in bnxt_en driver, from
    Dan Carpenter.

 7) Add missing memory allocation return value check to DSA loop driver,
    from Christophe Jaillet.

 8) Fix XDP leak on driver unload in qed driver, from Suddarsana Reddy
    Kalluru.

 9) Don't inherit MC list from parent inet connection sockets, another
    syzkaller spotted gem. Fix from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  dccp/tcp: do not inherit mc_list from parent
  qede: Split PF/VF ndos.
  qed: Correct doorbell configuration for !4Kb pages
  qed: Tell QM the number of tasks
  qed: Fix VF removal sequence
  qede: Fix XDP memory leak on unload
  net/mlx4_core: Reduce harmless SRIOV error message to debug level
  net/mlx4_en: Avoid adding steering rules with invalid ring
  net/mlx4_en: Change the error print to debug print
  drivers: net: wimax: i2400m: i2400m-usb: Use time_after for time comparison
  DECnet: Use container_of() for embedded struct
  Revert "ipv4: restore rt->fi for reference counting"
  net: mdio-mux: bcm-iproc: call mdiobus_free() in error path
  net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
  ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf
  net: cdc_ncm: Fix TX zero padding
  stmmac: pci: split out common_default_data() helper
  stmmac: pci: RX queue routing configuration
  stmmac: pci: TX and RX queue priority configuration
  stmmac: pci: set default number of rx and tx queues
  ...

Pull dmaengine updates from Vinod Koul:
 "This time again a smaller update consisting of:

   - support for TI DA8xx dma controller and updates to the cppi driver

   - updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor,
     ioat, dmatest"

* tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits)
  dmaengine: pl08x: remove lock documentation
  dmaengine: pl08x: fix pl08x_dma_chan_state documentation
  dmaengine: pl08x: Use the BIT() macro consistently
  dmaengine: pl080: Fix some missing kerneldoc
  dmaengine: pl080: Cut some unused defines
  dmaengine: dmatest: Add check for supported buffer count (sg_buffers)
  dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test
  dmaengine: virt-dma: Convert to use list_for_each_entry_safe()
  dma-debug: use offset_in_page() macro
  dmaengine: mv_xor: use offset_in_page() macro
  dmaengine: dmatest: use offset_in_page() macro
  dmaengine: sun4i: fix invalid argument
  dmaengine: ioat: use setup_timer
  dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe()
  dmaengine: pl330: remove pdata based initialization
  dmaengine: cppi: fix build error due to bad variable
  dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
  dmaengine: cppi41: use managed functions devm_*()
  dmaengine: cppi41: fix cppi41_dma_tx_status() logic
  dmaengine: qcom_hidma: pause the channel on shutdown
  ...

Merge tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Adds a new driver for the PWM controller found on MediaTek SoCs and
  extends support for the Atmel PWM controller to include the SAMA5D2.

  Some existing drivers have been migrated to the atomic API and a few
  others see miscellaneous improvements"

* tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: tegra: Read PWM clock source rate in driver init
  pwm: pca9685: Fix GPIO-only operation
  pwm: mediatek: Don't explicitly set .owner
  pwm: tegra: Avoid potential overflow for short periods
  pwm: tegra: Add support to configure pin state in suspends/resume
  pwm: tegra: Add DT binding details to configure pin in suspends/resume
  pwm: tegra: Increase precision in PWM rate calculation
  pwm: tegra: Use DIV_ROUND_CLOSEST_ULL() instead of local implementation
  pwm: Add MediaTek PWM support
  dt-bindings: pwm: Add MediaTek PWM bindings
  pwm: atmel: Enable PWM on sama5d2
  pwm: atmel: Switch to atomic PWM
  pwm: atmel-hlcdc: Implement the suspend/resume hooks
  pwm: atmel-hlcdc: Convert to the atomic PWM API