- 27 Oct, 2014 21 commits
-
-
Benjamin Romer authored
The bracing in vbuschannel_sanitize_buffer() in vbusdeviceinfo.h is messy. Clean these up. Signed-off-by:
Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shrikrishna Khare authored
Fixed a coding style issue. Signed-off-by:
Shrikrishna Khare <shrikrishna.khare@gmail.com> Signed-off-by:
-
WANG Chao authored
kmalloc_kernel() previously declared in timskmodutils.h which recently got removed. Now also remove kmalloc_kernel(), because it's not used anywhere. Signed-off-by:
WANG Chao <wangchao19890207@gmail.com> Signed-off-by:
-
tssurya authored
Removed unneeded braces with the help of checkpatch.pl tool. Signed-off-by:
Surya Seetharaman <suryaseetharaman.9@gmail.com> Signed-off-by:
-
Tapasweni Pathak authored
This patch is generated by the following semantic patch // <smpl> @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; // </smpl> Signed-off-by:Tapasweni Pathak <tapaswenipathak@gmail.com> Signed-off-by:
-
Tapasweni Pathak authored
kfree on NULL pointer is a no-op. This used the following semantic patch to identify such a instance // <smpl> @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; // </smpl> As rxb is always null at this point, so the code to kfree it and intializing it to NULL is removed completely. Suggested by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: -
Surya Seetharaman authored
Removed unnecessary braces with the help of checkpatch.pl tool. Signed-off-by:
-
Jiayi Ye authored
In assignments such as value = (FLASH_CMD_STATUS_REG_READ << 24);, parentheses are not needed. The Coccinelle semantic patch was used to find cases. @r@ identifier x; expression e1, e2; @@ - x = (e1 << e2); + x = e1 << e2; Signed-off-by:
Jiayi Ye <yejiayily@gmail.com> Signed-off-by:
-
Tina Ruchandani authored
This patch fixes the following checkpatch errors in rtw_cmd.c : ERROR: switch and case should be at the same indent Signed-off-by:
Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by:
-
Tina Ruchandani authored
This patch fixes the following checkpatch errors: ERROR: that open brace { should be on the previous line ERROR: else should follow close brace '}' Exceptions: { is left on a new line to itself when fixing this error makes the line longer than 80 characters. Signed-off-by: -
Tina Ruchandani authored
This patch fixes the following checkpatch errors: ERROR: that open brace { should be on the previous line ERROR: else should follow close brace '}' Exceptions: { is left on a new line to itself when fixing this error makes the line longer than 80 characters. Signed-off-by: -
Aybuke Ozdemir authored
This patch focuses on fixing the following warning generated by checkpatch.pl for the file lirc_sasem.c: WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(... to printk(KERN_CONT ... Signed-off-by:
Aybuke Ozdemir <aybuke.147@gmail.com> Signed-off-by:
-
Tapasweni Pathak authored
Remove the if condition, as the code inside the if condition is commented and does not have any FIXME or TODO comment. Signed-off-by:
-
Jiayi Ye authored
If adapter is null, null dereference may occur. This patch fixes it. The following Coccinelle semantic patch was used to find the case. @@ expression E, E1; identifier f; statement S1,S2,S3; @@ * if (E == NULL) { ... when != if (E == NULL) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 Signed-off-by: -
Sarah Khan authored
Replaced C99 // comments by /* */ in wroute.c Signed-off-by:
Sarah Khan <sarahjmi07@gmail.com> Signed-off-by:
-
Sarah Khan authored
Used coccinelle patch @@ expression data; identifier f; @@ -data = +return f(...); -return (data); Signed-off-by: -
Tapasweni Pathak authored
Use kstrdup when the goal of an allocation is copy a string into the allocated region. Patch found by coccicheck. Signed-off-by:
-
Ebru Akagunduz authored
This patch fixes "cast to restricted __be32" sparse warning. remove temporary value assignment and use inplace __be32 conversion for ntohl function which is can get big endian format Signed-off-by:
Ebru Akagunduz <ebru.akagunduz@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Vaishali Thakkar authored
This patch uses kasprintf which combines kmalloc and sprintf. kasprintf also takes care of the size calculation. This is done using Coccinelle. Semantic patch used is as follows: @@ expression a,flag; expression list args; statement S; @@ a = - \(kmalloc\|kzalloc\)(...,flag) + kasprintf (flag,args) <... when != a if (a == NULL || ...) S ...> - sprintf(a,args); Signed-off-by:
Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by:
-
Somya Anand authored
'struct timeval t' is used to return remaining time in milliseconds. 32-bit systems using 'struct timeval' will break in the year 2038, so we have to replace that code with more appropriate types. This patch changes the android driver to use ktime_t. Signed-off-by:
Somya Anand <somyaanand214@gmail.com> Signed-off-by:
-
Somya Anand authored
'struct timeval last' is used for recording last time interrupt. 'struct timeval now' is used for calculating elapsed time. 32-bit systems using 'struct timeval' will break in the year 2038, so we have to replace that code with more appropriate types. This patch changes the comedi driver to use ktime_t. Since this code doesn't communicate the time values to the outside (user space, file system, network).Thus ktime_get() is a better than using do_gettimeofday() as it uses monotonic clock. ktime_to_us() returns an 's64', and using the '%' operator on that requires doing a 64-bit division which needs an expensive library function call the specific value of usec_current does not actually matter although it might matter that it's not always the same which will start with the offset from the lower 32 bit of the microsecond. Therefore: devpriv->usec_current = (ktime_to_us(devpriv->last) % USEC_PER_SEC) % devpriv->usec_period; is replaced by devpriv->usec_current = ((u32)ktime_to_us(devpriv->last)) % devpriv->usec_period; Signed-off-by:
-
- 23 Oct, 2014 19 commits
-
-
Jiayi Ye authored
If a variable has value 0, then there is no point in combining it with other things with |, as for any x, 0 | x is just x. The following semantic patch finds this problem. @@ expression x,e,e1; statement S; @@ if (x == 0) { <... when != x = e1 when != while(...) S when != for(...;...;...) S ( * x |= e | * x | e ) ...> } Signed-off-by:Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Ebru Akagunduz authored
skb->protocol variable type is __be16 and in if condition it is comparing with ETH_P_80211_RAW constant variable which is not __be16 type. Using be16_to_cpu() function, value of skb->protocol converted native processor format. This bug was found by sparse. Signed-off-by:
-
Aybuke Ozdemir authored
This patch focuses on fixing the following warning generated by checkpatch.pl for the file tcm825x.c: WARNİNG: min() should probably be min_t(u32, tgt_xclk, TCM825X_XCLK_MAX) The changes were applied using the following coccinelle rule: @@ expression e1, e2; typedef u32; @@ -tgt_xclk = min(e1, (u32)e2); +tgt_xclk = min_t(u32, e1, e2); Signed-off-by:
-
Tapasweni Pathak authored
This patch was generated by the following semantic patch: // <smpl> @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; // </smpl> Signed-off-by: -
Tapasweni Pathak authored
Removed the unnecessary else if condition as it has only one comment inside it and do not have an FIXME or TODO comment near to it too. Signed-off-by:
-
Tapasweni Pathak authored
This patch was generated by the following semantic patch: // <smpl> @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; // </smpl> Signed-off-by: -
Tapasweni Pathak authored
The function tv2int is used to convert timeval to int. 32-bit systems using 'struct timeval' will break in the year 2038, so we have to replace that code with more appropriate types. This patch changes the lirc_imon.c file of media: lirc driver. tv2int function is static and not used anywhere in this file too, so it is removed. I also build tested it. Signed-off-by:
-
Tapasweni Pathak authored
high is a bool type variable. bool variable should be assigned true, false not 1 or 0. This patch assigns high to true, replacing 1. Signed-off-by:
-
Jiayi Ye authored
Variable whose value is initialized but never used is unnecessary. The following Coccinelle semantic patch removed the unused variable. @e@ identifier i; position p; type T; @@ extern T i@p; @@ type T; identifier i; constant C; position p != e.p; @@ - T i@p; <+... when != i - i = C; ...+> Signed-off-by:
-
Tapasweni Pathak authored
The sematic patch used for this is: // <smpl> @@ identifier i; constant c; @@ return - ( \(i\|-i\|i(...)\|c\) - ) ; // </smpl> Signed-off-by:Josh Triplett <josh@joshtriplett.org> Acked-by:
-
Tapasweni Pathak authored
Replaced calls to kzalloc followed by memcpy with a single call to kmemdup. Patch found using coccicheck. Signed-off-by:
-
Tapasweni Pathak authored
Casting rhe return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language, as mentioned in Documentation/CodingStyle, Chap 14. Removed the cast on kzalloc return value. Signed-off-by:
-
Jiayi Ye authored
This patch fixes following checkpatch.pl warning: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt Signed-off-by:
Jiayi Ye <yejiayily@gmail.comi> Signed-off-by:
-
Tina Ruchandani authored
This patch fixes the following checkpatch errors: ERROR: "foo * bar" should be "foo *bar" 951: FILE: drivers/staging/lustre/lustre/llite/namei.c:951: static void ll_get_child_fid(struct inode * dir, struct qstr *name, 1193: FILE: drivers/staging/lustre/lustre/llite/namei.c:1193: static int ll_unlink(struct inode * dir, struct dentry *dentry) Signed-off-by:
-
Tina Ruchandani authored
This patch fixes the following checkpatch error:j ERROR: switch and case should be at the same indent 105: FILE: drivers/staging/lustre/lustre/libcfs/fail.c:105: Signed-off-by:
-
Tina Ruchandani authored
This patch fixes the following checkpatch.pl error: "Macros with complex values should be enclosed in parentheses." Signed-off-by:
-
Tina Ruchandani authored
This patch fixes the following checkpatch.pl errors: ERROR: do not use C99 // comments 538: FILE: drivers/staging/lustre/lustre/llite/rw26.c:538: // .orig_aops.readpages = ll_readpages, 816: FILE: drivers/staging/lustre/lustre/llite/lproc_llite.c:816: //{ "mntpt_path", ll_rd_path, 0, 0 }, 826: FILE: drivers/staging/lustre/lustre/llite/lproc_llite.c:826: //{ "filegroups", lprocfs_rd_filegroups, 0, 0 }, Signed-off-by: -
Tina Ruchandani authored
This patch fixes the following checkpatch.pl warnings: WARNING: Prefer kcalloc over kzalloc with multiply 166: FILE: drivers/staging/lustre/lustre/llite/dir.c:166: page_pool = kzalloc(sizeof(page) * max_pages, GFP_NOFS); 796: FILE: drivers/staging/lustre/lustre/llite/lloop.c:796: loop_dev = kzalloc(max_loop * sizeof(*loop_dev), GFP_KERNEL); 800: FILE: drivers/staging/lustre/lustre/llite/lloop.c:800: disks = kzalloc(max_loop * sizeof(*disks), GFP_KERNEL); Signed-off-by:
-
Tina Ruchandani authored
This patch fixes misc. spacing errors reported by checkpatch.pl for lustre/llite/file.c Signed-off-by:
-
