- 31 Oct, 2019 40 commits
-
-
Charles McLachlan authored
Provide an ndo_xdp_xmit function that uses the XDP tx queue for this CPU to send the packet. Signed-off-by:
Charles McLachlan <cmclachlan@solarflare.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Charles McLachlan authored
Each CPU needs access to its own queue to allow uncontested transmission of XDP_TX packets. This means we need to allocate (up front) enough channels ("xdp transmit channels") to provide at least one extra tx queue per CPU. These tx queues should not do TSO. Signed-off-by: -
Charles McLachlan authored
Provide an ndo_bpf function to efx_netdev_ops that allows setting and querying of xdp programs on an interface. Also check that the MTU size isn't too big when setting a program or when the MTU is explicitly set. Signed-off-by:
-
Charles McLachlan authored
Adds a field to hold an attached xdp_prog, but never populates it (see following patch). Also, XDP_TX support is deferred to a later patch in the series. Track failures of xdp_rxq_info_reg() via per-queue xdp_rxq_info_valid flags and a per-nic xdp_rxq_info_failed flag. The per-queue flags are needed to prevent attempts to xdp_rxq_info_unreg() structs that failed to register. Possibly the API could be changed in the future to avoid the need for these flags. Signed-off-by:
-
Charles McLachlan authored
Add a field to efx_tx_buffer so that we can track xdp_frames. Add a flag so that buffers that contain xdp_frames can be identified and passed to xdp_return_frame. Signed-off-by:
-
Nathan Chancellor authored
When building for 32-bit ARM, there is a link time error because of a 64-bit division: ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by spectrum_buffers.c >>> net/ethernet/mellanox/mlxsw/spectrum_buffers.o:(mlxsw_sp_buffers_init) in archive drivers/built-in.a >>> did you mean: __aeabi_uidivmod >>> defined in: arch/arm/lib/lib.a(lib1funcs.o Avoid this by using div_u64, which is designed to avoid this problem. Fixes: bc9f6e94 ("mlxsw: spectrum_buffers: Calculate the size of the main pool") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Tested-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-10-31 please apply the following series of spooky qeth updates for net-next. The first two patches add support for an enhanced TX doorbell, which enables us to do more xmit_more-based bulking. Note that this requires one patch for the s390/qdio base layer, which has been graciously acked by Heiko to go through your tree. The remaining patches are just the usual minor cleanups/improvements. ==================== Signed-off-by: -
Julian Wiedmann authored
Instead of storing the multicast-mapped MAC address in an IP address object, just calculate the MAC address when actually building a cmd for the IP address. While at it, also clean up some rather verbose copying of IP addresses. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Replace our custom implementations with the stack's version of IP address hashing. Signed-off-by:
-
Julian Wiedmann authored
Any change to the card state should only be driven by qeth_l?_set_online() and qeth_l?_stop_card(). qeth_qdio_clear_card() currently also gets called from (a) qeth_core_shutdown(), where we haven't walked through the whole teardown sequence. So changing the state to DOWN is not accurate. (b) qeth_core_hardsetup_card(), which is only called while the card is still in DOWN state. No change in behaviour here. Signed-off-by: -
Julian Wiedmann authored
When setting a device online, both subdrivers have the same code to program the HW trap and Isolation mode. Move that code into a single place. Signed-off-by:
-
Julian Wiedmann authored
When napi_complete_done() returns false, the NAPI instance is still active and we can keep the IRQ disabled a little longer. Signed-off-by:
-
Julian Wiedmann authored
qdio.h recently gained a new helper macro that handles wrap-around on a QDIO queue, consistently use it across all of qeth. Signed-off-by:
-
Julian Wiedmann authored
For IQD devices with Multi-Write support, we can defer the queue-flush further and transmit multiple IO buffers with a single TX doorbell. The same-target restriction still applies. Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
This allows IQD drivers to send out multiple SBALs with a single SIGA instruction. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== DPAA Ethernet changes v2: remove excess braces Here are some more changes for the DPAA 1.x area. In summary, these changes use pages for the receive buffers and for the scatter-gather table fed to the HW on the Tx path, perform a bit of cleanup in some convoluted parts of the code, add some minor fixes related to DMA (un)mapping sequencing for a not so common scenario, add a device link that removes the interfaces when the QMan portal in use by them is removed. ==================== Signed-off-by: -
Madalin Bucur authored
Before this change, unbinding the QMan portals did not trigger a corresponding unbinding of the dpaa_eth making use of it; the first QMan portal related operation issued afterwards crashed the kernel. The device link ensures the dpaa_eth dependency upon the qman portal used is honoured at the QMan portal removal. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Madalin Bucur authored
Introduce the API required to make sure that the devices that use the QMan portal are unbound when the portal is unbound. Signed-off-by:
-
Madalin Bucur authored
Make sure all the frames that are in flight have time to be processed before the interface is completely brought down. Add a missing delay for the Rx path. Signed-off-by:
-
Madalin Bucur authored
User reports that an application making an (incorrect) call to restart AN on a fixed link DPAA interface triggers an error in the kernel log while the returned EINVAL should be enough. Reported-by:
Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by:
-
Madalin Bucur authored
Prior to this change, the frames dropped on receive or transmit were not displayed in the ethtool statistics, leaving the dropped frames unaccounted for. Signed-off-by:
-
Madalin Bucur authored
Use a page to store the scatter gather table on the transmit path. Signed-off-by:
-
Madalin Bucur authored
Remove cast, align variable name, simplify DMA map size computation. Signed-off-by:
-
Madalin Bucur authored
Instead of reading skb fields, use information from the DPAA frame descriptor. Signed-off-by:
-
Madalin Bucur authored
Avoid casts and repeated conversions. Signed-off-by:
-
Madalin Bucur authored
The dpaa_cleanup_tx_fd() function is called by the frame transmit confirmation callback but also on several error paths. This function is reading the transmit timestamp value. Avoid reading an invalid timestamp value on the error paths. Fixes: 4664856e ("dpaa_eth: add support for hardware timestamping") Signed-off-by:
-
Madalin Bucur authored
DMA unmapping is required before accessing the HW provided timestamping information. Fixes: 4664856e ("dpaa_eth: add support for hardware timestamping") Signed-off-by:
-
Madalin Bucur authored
Change the buffers used for reception from netdev_frags to pages. Signed-off-by:
-
Madalin Bucur authored
Currently the DPAA Ethernet driver is using three buffer pools for each interface, with three different sizes for the buffers provided for the FMan reception path. This patch reduces the number of buffer pools to one per interface. This change is in preparation of another, that will be switching from netdev_frags to page backed buffers for the receive path. Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some optimizations and cleanups This series adds some code optimizations and cleanups for the HNS3 ethernet driver. [patch 1/9] dumps some debug information when reset fail. [patch 2/9] dumps some struct netdev_queue information when TX timeout. [patch 3/9] cleanups some magic numbers. [patch 4/9] cleanups some coding style issue. [patch 5/9] fixes a compiler warning. [patch 6/9] optimizes some local variable initialization. [patch 7/9] modifies some comments. [patch 8/9] cleanups some print format warnings. [patch 9/9] cleanups byte order issue. ==================== Signed-off-by: -
Guojia Liao authored
Though the hip08 and the IMP(Intelligent Management Processor) have the same byte order right now, it is better to convert __be or __le variable into the CPU's byte order before print. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Guojia Liao authored
Using '%d' for printing type unsigned int or '%u' for type int would cause static tools to give false warnings, so this patch cleanups this warning by using the suitable format specifier of the type of variable. BTW, modifies the type of some variables and macro to synchronize with their usage. Signed-off-by:
-
Guangbin Huang authored
This patch makes the comment for macro HCLGE_MBX_GET_VF_FLR_STATUS more correct, and adds comments in some place to make the code more readable. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Guangbin Huang authored
The variable tx_ring is unnecessary to be initialized as it will be set before used, and the variable rst_cnt is better to be initialized when declaration for simplification. Signed-off-by:
-
Guojia Liao authored
In hns3_nic_init_irq(), when '*_int_idx' has more than 9 digits and the length of netdev's name is IFNAMSIZ, the total length of final name will be bigger the HNAE3_INT_NAME_LEN - 1, even though '*_int_idx' will never have such large value, but the compiler gives a format-truncation warning for this case. So this patch just enlarges the length to avoid this warning. Signed-off-by:
-
Guangbin Huang authored
To unify code style and make code simpler, this patch modifies some code, deletes unnecessary blank lines and {}, changes location of code, and so on. No functional change. Signed-off-by: -
Guojia Liao authored
To make the code more readable, this patch replaces some magic numbers with macro or sizeof operation. Also uses macro lower_32_bits and upper_32_bits to get bits 0-31 and 32-63 of a number, instead of using type conversion and '>>' operation. No functional change. Signed-off-by:
-
Yunsheng Lin authored
When there is a TX timeout, we can tell if the driver or stack has stopped the queue by looking at state field, and when has the last packet transmited by looking at trans_start field. So this patch prints these two field in the hns3_get_tx_timeo_queue_info(). Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Huazhong Tan authored
When reset fails, there is some information that will help for finding out why does reset fail. and removes an unused core_rst_cnt field in struct hclge_rst_stats. Signed-off-by:
-
David S. Miller authored
Sheetal Tigadoli says: ==================== bnxt_en: Add OP-TEE based bnxt f/w manager This patch series adds support for TEE based BNXT firmware management module and the driver changes to invoke OP-TEE APIs to fastboot firmware and to collect crash dump. Changes from v4: - update Kconfig to reflect dependency on TEE driver ==================== Signed-off-by:
-
