Replace the existing macros in "plx9080.h" that define values for the
DMPBAM register.  Use the prefix `PLX_DMPBAM_` for the macros.  Make use
of the `BIT(x)` and `GENMASK(h,l)` macros to define the values.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the existing macros in "plx9080.h" that define values for the
LBRD0 and LBRD1 registers.  Use the prefix `PLX_LBRD_` for macros that
apply to both registers, `PLX_LBRD0_` for macros that apply only to the
LBRD0 register, and `PLX_LBRD1_` for macros that apply only to the LBRD1
register.  Make use of the `BIT(x)` and `GENMASK(h,l)` macros to define
the values.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace `enum bigend_bits` in "plx9080.h" with a bunch of macros
defining values for the BIGEND register.  Use the prefix `PLX_BIGEND_`
for the macro names.  Make use of the `BIT(x)` and `GENMASK(h,l)` macros
to define the values.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace `enum marb_bits` in "plx9080.h" with a bunch of macros defining
values for the MARBR and DMAARB registers (which are the same
Mode/Arbitation register at two different offsets).  Use the prefix
`PLX_MARBR_` for the macros.  Make use of the `BIT(x)` and
`GENMASK(h,l)` macros to define the values.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the existing macros in "plx9080.h" that define values for the
LAS0BA and LAS1BA registers.  Use the prefix `PLX_LASBA_` for the
macros.  Make use of the `BIT(x)` and `GENMASK(h,l)` macros to define
the macros.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros for the PLX PCI 9080 LAS0RR and LAS1RR registers in
"plx9080.h", using the prefix `PLX_LASRR_`.  Make use of the `BIT(x)`
and `GENMASK(h,l)` macros to define the values.

Define a macro `PLX_LASRR_PREFETCH` for the "prefetchable memory" bit in
this register, and define a macro `PLX_LASRR_MLOC_MASK` to mask the PCI
memory location control bits.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros in "plx9080.h" that define the offsets of registers,
following the pattern `PLX_REG_<NAME>`, where `<NAME>` is the register
name from the PLX PCI 9080 Data Book.

Add defines for the "Mailbox" registers, and add parameterized macros
for the mailbox registers and the DMA control registers.  Make use of
the parameterized versions of the macros where it seems appropriate.

The registers for supporting the I2O (Intelligent Input/Output) feature
are largely left undefined, just defining enough to allow the I2O
feature to be disabled.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The defines related to the Power-Up Test Suite (PUTS) are just cruft that
has nothing to do with the PLX PCI-9080 chip.  They seem to have been
inherited from "drivers/net/plx9060.h" in the kernel 2.2.16 sources for
use by the "wanxl" driver.  Remove them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For the PLX local address space range registers, LAS0RR and LAS1RR, bit
0 indicates whether the local address space will be mapped to memory
space or I/O space.  If mapped to I/O space, bit 1 must be set to 0, and
bits 31 to 2 form the address decoding mask, which should be -2^N mod
2^32 for a range of length 2^N.

The `LRNG_IO_MASK` macro is supposed to specify the address decoding
bits for I/O space.  It currently has the value `0xfffffffa`, but should
be `0xfffffffc`, or possibly `0xfffffffe` (it doesn't really matter,
since bit 1 is required to be set to 0).  Change it to `0xfffffffc`.

Similarly, for the PLX local address space local base address (remap)
registers, LAS0BA and LAS1BA, bits 31 to 2, masked with the
corresponding "range" register form the local base address for the local
address space.  The `LMAP_IO_MASK` macro is supposed to mask the valid
bits for I/O space.  Change its value from `0xfffffffa` to `0xfffffffc`
to match `LRNG_IO_MASK`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The checkpatch.pl warns about two `udelay(x)` calls, one of 100
microseconds, and one of 10 microseconds.  The 100 microseconds one is
used when waiting for FPGA to become ready to accept firmware, and is
not that critical, so replace it with a call to `usleep_range(100,
1000)`.  The 10 microseconds one is called as each 16-bit word of
firmware data is written.  Replace it with a fairly tight
`usleep_range(10, 20)` to avoid slowing down firmware loading too much.
The firmware is fairly short, so this would only slow it down firmware
loading by about 20 milliseconds or so.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename functions to avoid CamelCase warnings from checkpatch, and to use
namespace associated with the driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros that define values for the reference DACs register to
avoid CamelCase, and to make it clearer which register they are
associated with.  Add a macro `DB2K_REG_DACS_SET` for the value `0x0080`
that triggers setting one of the references.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros that define values for the trigger control register to
avoid CamelCase, and to make it clearer which register they are
associated with.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros defining values for the DAC status register to avoid
CamelCase, and to make it clear which register they are associated with.
Refactor the macros defining the regular DAC channel "busy" bits into a
single macro that takes the DAC channel number as a parameter.

Add a macro to define the offset of the read-only DAC status register.
It is the same offset as the DAC control register, which is write-only.

The code in `daqboard2000_ao_eoc()` that checks the status for
completion of the DAC conversion looks wrong.  The register has a "busy"
bit for each channel, but the existing code only works for channels 0
and 1.  The driver only supports two DAC channels at the moment, so the
bug is currently harmless, but fix it so we can support four DAC
channels on some board models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros used to define values for the DAC control register to
avoid CamelCase and to make it clearer which register they are
associated with.  Refactor the macros used to define values to enable or
disable DAC channels to use the channel number as a parameter.  None of
these macros are currently used by the driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros associated with the acquisition status register to
avoid CamelCase and to make it clear which register they are associated
with.

Add a macro to define the offset of the read-only acquisition status
register.  It's the same offset as the acquisition control register,
which is write-only.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros defining values for the acquisition control register
to avoid CamelCase, and to make it clearer which register they are
associated with.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros defining register offsets to avoid CamelCase, and to
use namespace associated with the driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the macros defining values for the Serial EEPROM Control Register
to avoid CamelCase.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch issue: "CHECK: Please use a blank line after
function/struct/union/enum declarations".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch issues of the form "CHECK: spaces preferred around that
'*' (ctx:VxV)".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat one of the block comments to conform to the usual style (it's
the only one that doesn't).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove some commented out code.  Some of it uses constructs that don't
exist in the driver, and probably come from the source code for the MS
Windows driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch Replace all occurences of (1<<x) by BIT(x) in the file pcmmio.c to
get rid of checkpatch.pl "CHECK" output "Prefer using the BIT macro"
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the dt2801.c file that fixes up a Block comments
issues found by the checkpatch.pl tool.

i.e. Block comments use a trailing */ on a separate line
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes up a WARNING: 'Block comments use a trailing */ on a
separate line'found by the checkpatch.pl tool.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The interrupt support available on this board is pretty limited but its
simple enough to give basic async command support.

This allows reading a single channel continuously using either the internal
or an external clock to trigger each conversion. The command can also use
the external trigger input to start the command if the external clock is
being used for conversions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed following checkpatch.pl warnings
WARNING: Prefer WRITE_ONCE(<FOO>, <BAR>) over ACCESS_ONCE(<FOO>) = <BAR>

WARNING: Prefer READ_ONCE(<FOO>) over ACCESS_ONCE(<FOO>)
Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the MODULE_DESCRIPTION to something more useful than the generic
"Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this array so it has namespace associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some whitespace to the analog output subdevice initialization
and rename the (*insn_read) function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The A/D ranges are not programmable but the gain is. Currently this driver
uses a configuration option to select the comedi_lrange that will be used
for the analog input subdevice. This requires that the user makes sure the
correct option value is used.

The user space library uses the range information to convert between raw
values and physical units. If the user passed an incorrect option when
attaching the driver the conversion will be incorrect.

A previous patch allowed the gain to be set based on the chanspec range.
Prior to that the gain was always set to 1 so any conversion with a gain
that is not 1 would be incorrect anyway.

Simplify the analog input ranges by providing a range_table for the pgh and
pgl boards that contain all the possible range/gain options. The user can
then select the correct range (and gain) when converting values or reading
the analog inputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The remaining members of the private data are not used by the driver.
Remove it and the allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog inputs are confgured with jumpers on the board to be:
  * 16 single-ended inputs
  * 8 differential inputs
  * 16 pseudo-differential inputs (common ground)

Simplify the handling of this configuration option and properly set
the subdev_flags based on the selected input mode.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some whitespace to the analog output subdevice initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The D/A ranges are not programmable. Currently this driver uses some
configuration options to select the comedi_lrange for each channel.
This is a bit messy and it requires the user to make sure the correct
option value is used.

The range information isn't used by the driver. The user space library
uses it to convert between raw data values and physical units. If the
user passed an incorrect option when attaching the driver the conversion
will be incorrect.

Simplify the analog output ranges by providing a range_table that
contains all the possible output ranges. The user can then select the
correct range when converting values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some whitespace to the digital input and output subdevice
initialization. Reorder the initialization a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This register currently is not being used. For aesthetics, cleanup the
define and the comment about the frequency control.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The digital input and outputs are separate ports even though they share the
same register offset. For aesthetics, define then separately and remove the
redundant information in the comment.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>