This patch updates the very-outdated Kconfig description for bonding.
Users reading the help text in menuconfig or xconfig would see text that
implied that bonding only supports static link aggregation, and required a
specific switch to make it work.  The new description mentions multiple
bonding modes and points the user to the bonding.txt documentation.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

	This updates a warning message that the bonding driver issues
when some modes are unable to determine the link speed of a slave
device.  The old message led users to believe that bonding was slowing
their gigabit devices to 100 Mb/sec.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

	This updates the bonding driver to use the dev_set_mtu() and
dev_set_mac_address() wrapper functions.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

	This moves the SIOCSIFHWADDR code from dev_ifsioc() into a
separate new function, dev_set_mac_address().  This provides a single
entry point for all callers performing MAC address changes.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

This fixes the mincore syscall in three ways:

 (1) It moves as much argument checking outside of the semaphore-holding
     region as possible.

 (2) It checks the region parameters against TASK_SIZE so that a 32-bit binary
     on a 64-bit platform will get the right error when calling this syscall
     on a region that overlaps the end of the 32-bit address space.

 (3) It tidies up the VMA checking loop a little.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>

The attached patch fixes sigaltstack handling for RT signal return. It was
reading a userspace struct into kernel space and then passing the kernel copy
to a generic signalling routine which then assumed it had been passed a
userspace pointer...
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Alexander Viro <aviro@redhat.com>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>

do_i2c_rdwr_ioctl() does two compat_alloc_user_space().  That doesn't
work; no state is kept and second allocation will ignore the first one
(i.e.  give overlapping chunk of user stack).

Fixed by doing allocation at once, slightly cleaned up.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

dm-stripe does do_div() on potentially 32bit data.  do_div()
implementation has every right to be Not Happy(tm) with that...

The fix is obvious - that's what sector_div() is for...
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch removes TANBAC_TB0219 doubly registered in kernel config.
Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The mcd driver drives only very old hardware (some single and double speed
CD drives that were connected either via the soundcard or a special ISA
card), and the mcdx driver offers more functionality for the same hardware.

My plan is to mark MCD as broken in 2.6.11 and if noone complains 
completely remove this driver some time later.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It adds the sleep support for newer powermacs, improve power saving on some
laptops, makes use of the new fbdev modelist management routines, and fixes
a few backlight related issues.

I tested it on a thinkpad T30 and a few PPC boxes with success.  It should
be less invasive than the previous one (I don't try to restore the mode on
exit, that is what breaks the thinkpad and possibly other stuffs that boot
in VGA text mode), plus fixed a couple of bugs in the mode detection code. 
I also reverted the memory map fix on ppc since it doesn't work properly on
some recent laptops where the firmware sets a tiled display.  I'll rework
that completely to update the memory map as part of the mode setting later.
That should fix various issues when switching with X/DRI on x86.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch updates aty128fb power management code to the changes of the
powermac sleep mecanism.  It makes the driver use the new hook for early
wakeup, adds the call to the arch code indicating wether it can wakeup the
chip, etc...  This patch shouldn't break non-ppc, but this should be
tested.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The new PowerMac sleep code provides an arch hook that can be used by video
drivers on laptops to bring back the screen very early, pretty much before
anything else.  This basically turns reports of the style "my laptop doesn't
wakeup" to "I get this or this oops/error/panic on wakeup", making fixing the
PM related bugs possible on a whole range of them.

However, the fbdev wakeup code triggers WARN_ON's in the VT subsystem if
called without the console semaphore when redrawing the screen (I added those
warnings a couple of kernel versions ago), and we can't call
acquire_console_sem() since we are so early in the wakeup process that we are
considered as in_atomic() (we hold irqs off too).

This patch addds a try_acquire_console_sem() function that can be used by
those video drivers that implement this early wakeup hook.  If the acquire
fails (which should never happen in practice), wakeup is delayed to the normal
PCI callback which does a blocking acquire_console_sem().
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The 1999 version of the DMI spec had a different configuration than the
newer versions for the IPMI configuration information.  This patch handles
the differences between the two.
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In linux 2.6, PTRACE_SETOPTIONS is redefined to 0x4200, while the old 2.4
value (21) is still available as PTRACE_OLDSETOPTIONS.

So, if UML uses PTRACE_SETOPTIONS, an UML-kernel built on a 2.6 won't run
on a 2.4 host.  Hence we must use PTRACE_OLDSETOPTIONS.

For cases when PTRACE_OLDSETOPTIONS does not exists (i.e.  2.4 host or
archs which miss it because they don't have a "deprecated" value), we
fallback this macro to PTRACE_SETOPTIONS.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix a typo in the Makefile cleanup merged earlier, which causes compile
failures in some edge cases.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: David S. Miller <davem@davemloft.net>

smp_mb(), smp_rmp() and smp_wmb() definitions have a trailing semicolon 
and cause compilation errors in single statement context, like 
if-then-else on line 358 in include/linux/skbuff.h. This patch removes 
all three offending semicolons to make it compile.
Signed-off-by: Meelis Roos <mroos@linux.ee>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Helps with crazy Mac OS-X TCP implementations which delay the
recvmsg() wakeup of the user until push is seen.

Based upon ideas from Alexey Kuznetsov, and a preliminary
patch by Stephen Hemminger.
Signed-off-by: David S. Miller <davem@davemloft.net>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

The nls_cp936.c is not synchronized with MS's translation table, there are
some characters have different code from the code in updated table of MS.
For example, the unicode for character 0xB8A3 (GBK) should be U+798F, but
the code is U+FA1B in nls_cp936.c.

Regenerated the tables.  The number of differences is rather large, so I
did not check every change, but looking at a random sample the changes seem
OK.  Mostly the CJK Compatibility Ideographs have been replaced by their
ordinary equivalents.  Some code points that were unassigned now got a
meaning.
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

local variable is base, not vbase.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Richard Purdie provided a patch to fix support for XScale1 processors (this
is the PMU version i never had access to initially), we weren't clearing
the overflow flags after an overflow interrupt had triggered resulting in
no additional interrupts occuring.  Additionally i've added basic power
management support.
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This effectively enables executable stack and executable heap for all 32bit
programs on x86-64, except if noexec32=on is specified.

This does not support changing this with personality right now, this would
need more intrusive changes.  A 64bit process will always turn it off and a
32bit process turn it on.  

Also readd the noexec32=on option to turn this off and fix a minor bug in
noexec=...  (would be reported as unknown option)
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The linker doesn't complain, but i got this error on ARM which has similar
code.

oprofile_arch_exit: discarded in section `.exit.text' from arch/arm/oprofile/built-in.o
arch/arm/oprofile/built-in.o(.init.text+0x4c): In function `oprofile_init':
: relocation truncated to fit: R_ARM_PC24 oprofile_arch_exit

oprofile_arch_init()
	<error path>
	oprofile_arch_exit()
		__exit nmi_exit()
			__exit exit_driverfs()
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

So we discover that Borland's Kylix application builder emits weird elf
files which describe a non-writeable bss segment.

So remove the clear_user() check at the place where we zero out the bss.  I
don't _think_ there are any security implications here (plus we've never
checked that clear_user() return value, so whoops if it is a problem).
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The second parameter of the sys_ipc system wrapper on ppc64, s390-64 and
sparc64 is an "int".  sys_shmget gets called with this 32 bit value as the
size parameter.  This limits the maximum shared memory segment on these
three architectures to 2GB.  To fix this the second parameter is declared
as an "unsigned long" and is then casted to the type required by the The
same int vs.  unsigned long bug is fixed for sys_msgsnd and sys_msgrcv as
well.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes an incorrect sign extension in the compat layer that breaks
32bit shmget that are >2GB.  sys_shmget has a signed size_t size argument,
and the int size argument coming from 32bit user space would get sign
extended to 64bit, which is wrong.

I fixed it on all compat architectures, except PPC64 which was already ok. 

It was originally debugged and fixed by Karl Rister @ IBM for SLES9 on x86-64.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Attached patch defines dma_mapping_error on alpha.  Without this
libata-core.c won't compile.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Another fix to the put_chip() concurrency logic.

Problem was occurring when:

1) one thread was erasing a block in partition x;
2) another thread suspended the erase in order to write to
   partition y;
3) a third thread came along to read a different block from
   partition x and, when it called put_chip(), chip->oldstate was
   FL_ERASING and the erase (mistakenly) resumed;
4) the write in partition y obviously failed at that point.

Incidentally, the fix for this problem also fixed the case where
suspending writes for MTD XIP usage was not working properly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: Andrew Vasquez <andrew.vasquez@qlogic.com>

replace them with _smp_processor_id()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1. FAN Status/Control: you can now get the fan status (running or not) and
   also set the fan speed (for <5 seconds only). The problem is that there
   is an auto regulator that kicks in within about 5 seconds after that to
   restart the fan if it is above a threshold temperature (39 Degree C in
   my Vaio). It is useful just to get the fan status (primarily). It also
   appears that you can change the speed by increasing the values (much
   like the LCD control) - there are effectively only about 6 speeds (it
   seems - not sure, but from what I've played with on my Vaio).

2. Temperature: you can get the current temperature (same as reported by
   ACPI). This is primarily useful for APM users (since ACPI already gives
   this). I have used this to detect when the fan comes on in my Vaio (39
   Degree C).

From: Narayanan R S <nars@kadamba.org>
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fold the contents of sonypi.h into sonypi.c making some structures static.

Partly-from: Adrian Bunk <bunk@stusta.de>
Suggested-by: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use MISC_DYNAMIC_MINOR in miscdevice.minor assignment.

Patch-from: Olaf Hering <olh@suse.de>
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>