- 05 Apr, 2012 4 commits
-
-
Gleb Natapov authored
"Page ready" async PF can kick vcpu out of idle state much like IRQ. We need to tell RCU about this. Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
git://github.com/paulusmack/linuxAvi Kivity authored
Five fixes for bugs that have crept in to the powerpc KVM implementations. These are all small simple patches that only affect arch/powerpc/kvm. They come from the series that Alex Graf put together but which was too late for the 3.4 merge window. * tag 'powerpc-fixes' of git://github.com/paulusmack/linux: KVM: PPC: Book3S: PR: Fix preemption KVM: PPC: Save/Restore CR over vcpu_run KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code Signed-off-by: Avi Kivity <avi@redhat.com>
-
Marcelo Tosatti authored
vmx_set_cr0 is called from vcpu run context, therefore it expects kvm->srcu to be held (for setting up the real-mode TSS). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Sasikantha babu authored
Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
- 03 Apr, 2012 7 commits
-
-
Alexander Graf authored
We were leaking preemption counters. Fix the code to always toggle between preempt and non-preempt properly. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Alexander Graf authored
On PPC, CR2-CR4 are nonvolatile, thus have to be saved across function calls. We didn't respect that for any architecture until Paul spotted it in his patch for Book3S-HV. This patch saves/restores CR for all KVM capable PPC hosts. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
The ABI specifies that CR fields CR2--CR4 are nonvolatile across function calls. Currently __kvmppc_vcore_entry doesn't save and restore the CR, leading to CR2--CR4 getting corrupted with guest values, possibly leading to incorrect behaviour in its caller. This adds instructions to save and restore CR at the points where we save and restore the nonvolatile GPRs. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
In kvm_alloc_linear we were using and deferencing ri after the list_for_each_entry had come to the end of the list. In that situation, ri is not really defined and probably points to the list head. This will happen every time if the free_linears list is empty, for instance. This led to a NULL pointer dereference crash in memset on POWER7 while trying to allocate an HPT in the case where no HPTs were preallocated. This fixes it by using a separate variable for the return value from the loop iterator. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Alexander Graf authored
We were failing to compile on book3s_32 with the following errors: arch/powerpc/kvm/book3s_pr.c:883:45: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] arch/powerpc/kvm/book3s_pr.c:898:79: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] Fix this by explicity casting the u64 to long before we use it as a pointer. Also, on PPC32 we can not use get_user/put_user for 64bit wide variables, as there is no single instruction that could load or store variables that big. So instead, we have to use copy_from/to_user which works everywhere. Reported-by: Jörg Sommer <joerg@alea.gnuu.de> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull dma-buf prime support from Dave Airlie: "This isn't a majorly urgent thing to have, but we'd like to set the stage for working on dma-buf support in the drm drivers for the next merge window, so I'd like to push in the initial submission now so people have something that we can build on top of. The code just introduces the user interface and internal helper functions for drivers to use. We have driver support under development for i915, nouveau, udl on x86 and exynos, omapdrm on arm, which we would be aiming for the next merge window." In the -rc1 announcement I asked for people who would use this to comment on it, and got severa "Yes please" from people for this and for HSI (that I merged earlier). So far crickets on pohmelfs and the DMA-mapping infrastructure. * 'drm-prime-dmabuf-initial' of git://people.freedesktop.org/~airlied/linux: drm: base prime/dma-buf support (v5)
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Provide device string properly for USB i2400m wimax devices, also don't OOPS when providing firmware string. From Phil Sutter. 2) Add support for sh_eth SH7734 chips, from Nobuhiro Iwamatsu. 3) Add another device ID to USB zaurus driver, from Guan Xin. 4) Loop index start in pool vector iterator is wrong causing MAC to not get configured in bnx2x driver, fix from Dmitry Kravkov. 5) EQL driver assumes HZ=100, fix from Eric Dumazet. 6) Now that skb_add_rx_frag() can specify the truesize increment separately, do so in f_phonet and cdc_phonet, also from Eric Dumazet. 7) virtio_net accidently uses net_ratelimit() not only on the kernel warning but also the statistic bump, fix from Rick Jones. 8) ip_route_input_mc() uses fixed init_net namespace, oops, use dev_net(dev) instead. Fix from Benjamin LaHaise. 9) dev_forward_skb() needs to clear the incoming interface index of the SKB so that it looks like a new incoming packet, also from Benjamin LaHaise. 10) iwlwifi mistakenly initializes a channel entry as 2GHZ instead of 5GHZ, fix from Stanislav Yakovlev. 11) Missing kmalloc() return value checks in orinoco, from Santosh Nayak. 12) ath9k doesn't check for HT capabilities in the right way, it is checking ht_supported instead of the ATH9K_HW_CAP_HT flag. Fix from Sujith Manoharan. 13) Fix x86 BPF JIT emission of 16-bit immediate field of AND instructions, from Feiran Zhuang. 14) Avoid infinite loop in GARP code when registering sysfs entries. From David Ward. 15) rose protocol uses memcpy instead of memcmp in a device address comparison, oops. Fix from Daniel Borkmann. 16) Fix build of lpc_eth due to dev_hw_addr_rancom() interface being renamed to eth_hw_addr_random(). From Roland Stigge. 17) Make ipv6 RTM_GETROUTE interpret RTA_IIF attribute the same way that ipv4 does. Fix from Shmulik Ladkani. 18) via-rhine has an inverted bit test, causing suspend/resume regressions. Fix from Andreas Mohr. 19) RIONET assumes 4K page size, fix from Akinobu Mita. 20) Initialization of imask register in sky2 is buggy, because bits are "or'd" into an uninitialized local variable. Fix from Lino Sanfilippo. 21) Fix FCOE checksum offload handling, from Yi Zou. 22) Fix VLAN processing regression in e1000, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) sky2: dont overwrite settings for PHY Quick link tg3: Fix 5717 serdes powerdown problem net: usb: cdc_eem: fix mtu net: sh_eth: fix endian check for architecture independent usb/rtl8150 : Remove duplicated definitions rionet: fix page allocation order of rionet_active via-rhine: fix wait-bit inversion. ipv6: Fix RTM_GETROUTE's interpretation of RTA_IIF to be consistent with ipv4 net: lpc_eth: Fix rename of dev_hw_addr_random net/netfilter/nfnetlink_acct.c: use linux/atomic.h rose_dev: fix memcpy-bug in rose_set_mac_address Fix non TBI PHY access; a bad merge undid bug fix in a previous commit. net/garp: avoid infinite loop if attribute already exists x86 bpf_jit: fix a bug in emitting the 16-bit immediate operand of AND bonding: emit event when bonding changes MAC mac80211: fix oper channel timestamp updation ath9k: Use HW HT capabilites properly MAINTAINERS: adding maintainer for ipw2x00 net: orinoco: add error handling for failed kmalloc(). net/wireless: ipw2x00: fix a typo in wiphy struct initilization ...
-
- 02 Apr, 2012 28 commits
-
-
Lino Sanfilippo authored
This patch corrects a bug in function sky2_open() of the Marvell Yukon 2 driver in which the settings for PHY quick link are overwritten. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Stephen Hemminger <shemminger@vyattta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
This merges some of the fixes from Paul Gortmaker for the header file cleanup fallout. Some of the patches are going through arch maintainer trees, and David Howells suggested another be done differently, but this at least fixes a few cases. * emailed from Paul Gortmaker <paul.gortmaker@windriver.com>: asm-generic: add linux/types.h to cmpxchg.h firewire: restore the device.h include in linux/firewire.h frv: fix warnings in mb93090-mb00/pci-dma.c about implicit EXPORT_SYMBOL parisc: fix missing cmpxchg file error from system.h split blackfin: fix cmpxchg build fails from system.h fallout avr32: fix build failures from mis-naming of atmel_nand.h ARM: mach-msm: fix compile fail from system.h fallout irq_work: fix compile failure on MIPS from system.h split
-
Matt Carlson authored
If port 0 of a 5717 serdes device powers down, it hides the phy from port 1. This patch works around the problem by keeping port 0's phy powered up. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
Builds of the openrisc or1ksim_defconfig show the following: In file included from arch/openrisc/include/generated/asm/cmpxchg.h:1:0, from include/asm-generic/atomic.h:18, from arch/openrisc/include/generated/asm/atomic.h:1, from include/linux/atomic.h:4, from include/linux/dcache.h:4, from fs/notify/fsnotify.c:19: include/asm-generic/cmpxchg.h: In function '__xchg': include/asm-generic/cmpxchg.h:34:20: error: expected ')' before 'u8' include/asm-generic/cmpxchg.h:34:20: warning: type defaults to 'int' in type name and many more lines of similar errors. It seems specific to the or32 because most other platforms have an arch specific component that would have already included types.h ahead of time, but the o32 does not. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jonas Bonn <jonas@southpole.se> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David Howells <dhowells@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
Commit 313162d0 ("device.h: audit and cleanup users in main include dir") exchanged an include <linux/device.h> for a struct *device but in actuality I misread this file when creating 313162d0 and it should have remained an include. There were no build regressions since all consumers were already getting device.h anyway, but make it right regardless. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
To fix: arch/frv/mb93090-mb00/pci-dma.c:31:1: warning: data definition has no type or storage class [enabled by default] arch/frv/mb93090-mb00/pci-dma.c:31:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/frv/mb93090-mb00/pci-dma.c:31:1: warning: parameter names (without types) in function declaration [enabled by default] arch/frv/mb93090-mb00/pci-dma.c:38:1: warning: data definition has no type or storage class [enabled by default] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
Commit b4816afa ("Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h") introduced the concept of asm/cmpxchg.h but the parisc arch never got one. Fork the cmpxchg content out of the asm/atomic.h file to create one. Some minor whitespace fixups were done on the block of code that created the new file. Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
Commit 3bed8d67 ("Disintegrate asm/system.h for Blackfin [ver #2]") introduced arch/blackfin/include/asm/cmpxchg.h but has it also including the asm-generic one which causes this: CC arch/blackfin/kernel/asm-offsets.s In file included from arch/blackfin/include/asm/cmpxchg.h:125:0, from arch/blackfin/include/asm/atomic.h:10, from include/linux/atomic.h:4, from include/linux/spinlock.h:384, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:57, from arch/blackfin/kernel/asm-offsets.c:10: include/asm-generic/cmpxchg.h:24:15: error: redefinition of '__xchg' arch/blackfin/include/asm/cmpxchg.h:82:29: note: previous definition of '__xchg' was here make[2]: *** [arch/blackfin/kernel/asm-offsets.s] Error 1 It really only needs two simple defines from asm-generic, so just use those instead. Cc: Bob Liu <lliubbo@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
Commit bf4289cb ("ATMEL: fix nand ecc support") indicated that it wanted to "Move platform data to a common header include/linux/platform_data/atmel_nand.h" and the new header even had re-include protectors with: #ifndef __ATMEL_NAND_H__ However, the file that was added was simply called atmel.h and this caused avr32 defconfig to fail with: In file included from arch/avr32/boards/atstk1000/setup.c:22: arch/avr32/mach-at32ap/include/mach/board.h:10:44: error: linux/platform_data/atmel_nand.h: No such file or directory In file included from arch/avr32/boards/atstk1000/setup.c:22: arch/avr32/mach-at32ap/include/mach/board.h:121: warning: 'struct atmel_nand_data' declared inside parameter list arch/avr32/mach-at32ap/include/mach/board.h:121: warning: its scope is only this definition or declaration, which is probably not what you want make[2]: *** [arch/avr32/boards/atstk1000/setup.o] Error 1 It seems the scope of the file contents will expand beyond just nand, so ignore the original intention, and fix up the users who reference the bad name with the _nand suffix. CC: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> CC: David Woodhouse <dwmw2@infradead.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
To fix: In file included from arm/boot/compressed/misc.c:28:0: arm/mach-msm/include/mach/uncompress.h: In function 'putc': arch/arm/mach-msm/include/mach/uncompress.h:48:3: error: implicit declaration of function 'smp_mb' [-Werror=implicit-function-declaration] The putc does a cpu_relax which for this platform is smp_mb. Bisect indicates the 1st failing commit as: 0195c002 ("Merge tag 'split-asm_system_h...") Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://gitorious.org/kernel-hsi/kernel-hsiLinus Torvalds authored
Pull HSI (High Speed Synchronous Serial Interface) framework from Carlos Chinea: "The High Speed Synchronous Serial Interface (HSI) is a serial interface mainly used for connecting application engines (APE) with cellular modem engines (CMT) in cellular handsets. The framework is currently being used for some people and we would like to see it integrated into the kernel for 3.3. There is no HW controller drivers in this pull, but some people have already some of them pending which they would like to push as soon as this integrated. I am also working on the acceptance for an TI OMAP one, based on a compatible legacy version of the interface called SSI." Ok, so it didn't get into 3.3, but here it is pulled into 3.4. Several people piped up to say "yeah, we want this". * 'for-next' of git://gitorious.org/kernel-hsi/kernel-hsi: HSI: hsi_char: Update ioctl-number.txt HSI: Add HSI API documentation HSI: hsi_char: Add HSI char device kernel configuration HSI: hsi_char: Add HSI char device driver HSI: hsi: Introducing HSI framework
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull 'make cscope' fix from Michal Marek: "The kbuild.git#misc pull request introduced a bug that broke make cscope. Apparently, both the original author and me only tested the use case that the commit was supposed to improve (make tags/TAGS), and not the use case that was not supposed (make cscope)." * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: tags.sh: Add missing quotes
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - Fix for CPU hotplug hang in padata. - Avoid using cpu_active inappropriately in pcrypt and padata. - Fix for user-space algorithm lookup hang with IV generators. - Fix for netlink dump of algorithms where stuff went missing due to incorrect calculation of message size. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: user - Fix size of netlink dump message crypto: user - Fix lookup of algorithms with IV generator crypto: pcrypt - Use the online cpumask as the default padata: Fix cpu hotplug padata: Use the online cpumask as the default padata: Add a reference to the api documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Benjamin Herrenschmidt: "This contains a couple more fixes for the system.h disintegration, a trivial section mismatch fix, a couple of patches from akpm that I didn't quite get he expected me to pickup, and a few more trivialities form Kumar that he appear to have forgotten to send me in the previous batch." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/eeh: Fix use of set_current_state() in eeh event handling set_current_state() wart powerpc/eeh: Remove eeh_event_handler()->daemonize() powerpc/kvm: Fallout from system.h disintegration powerpc: Fix fallout from system.h split up powerpc: Mark const init data with __initconst instead of __initdata powerpc/qe: Update the SNUM table for MPC8569 Rev2.0 powerpc/dts: Removed fsl,msi property from dts. powerpc/epapr: add "memory" as a clobber to all hypercalls powerpc/85xx: Enable I2C_CHARDEV and I2C_MPC options in defconfigs powerpc/85xx: add the P1020UTM-PC DTS support powerpc/85xx: add the P1020MBG-PC DTS support powerpc/8xxx: remove 85xx/86xx restrictions from fsl_guts.h
-
git://github.com/rustyrussell/linuxLinus Torvalds authored
Pull cpumask cleanups from Rusty Russell: "(Somehow forgot to send this out; it's been sitting in linux-next, and if you don't want it, it can sit there another cycle)" I'm a sucker for things that actually delete lines of code. Fix up trivial conflict in arch/arm/kernel/kprobes.c, where Rusty fixed a user of &cpu_online_map to be cpu_online_mask, but that code got deleted by commit b21d55e9 ("ARM: 7332/1: extract out code patch function from kprobes"). * tag 'for-linus' of git://github.com/rustyrussell/linux: cpumask: remove old cpu_*_map. documentation: remove references to cpu_*_map. drivers/cpufreq/db8500-cpufreq: remove references to cpu_*_map. remove references to cpu_*_map in arch/
-
Paul Gortmaker authored
Builds of the MIPS platform ip32_defconfig fails as of commit 0195c002 ("Merge tag 'split-asm_system_h ...") because MIPS xchg() macro uses BUILD_BUG_ON and it was moved in commit b81947c6 ("Disintegrate asm/system.h for MIPS"). The root cause is that the system.h split wasn't tested on a baseline with commit 6c03438e ("kernel.h: doesn't explicitly use bug.h, so don't include it.") Since this file uses BUG code in several other places besides the xchg call, simply make the inclusion explicit. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
When $remove_structs is empty a test for empty string will turn into test -n with no arguments meaning true. Add quotes so an empty string is tested and so that make cscope works again. Reported-and-tested-by: Jike Song <albcamus@gmail.com> Reported-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Yang Bai <hamo.by@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
-
Andrew Morton authored
That set_current_state() won't work very well: the subsequent mutex_lock() might flip the task back into TASK_RUNNING. Attempt to put it somewhere where it might have been meant to be, and attempt to describe why it might have been added. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Oleg Nesterov authored
daemonize() is only needed when a user-space task does kernel_thread(). eeh_event_handler() thread is created by the worker kthread, and thus it doesn't need the soon-to-be-deprecated daemonize(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Linas Vepstas <linasvepstas@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Add a missing include to fix build Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Uwe Kleine-König authored
As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Anatolij Gustschin <agust@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: cbe-oss-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
-
Rabin Vincent authored
Make CDC EEM recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1494 bytes, and the host is unable to receive standard 1500-byte frames from the device. Tested with the Linux USB Ethernet gadget. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
SuperH has the "CONFIG_CPU_LITTLE_ENDIAN" and the "__LITTLE_ENDIAN__". But, other architecture doesn't have them. So, this patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
huajun li authored
There exist duplicated macro definitions in rtl8150.c, remove them. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Akinobu Mita authored
rionet_active is allocated from the page allocator and the allocation order is calculated on the assumption that the page size is 4KB, so it wastes memory on more than 4K page systems. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andreas Mohr authored
Bug appeared in a384a33b ("via-rhine: RHINE_WAIT_FOR macro removal). It can be noticed during suspend/resume. Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: David Lv <DavidLv@viatech.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Apr, 2012 1 commit
-
-
Shmulik Ladkani authored
In IPv4, if an RTA_IIF attribute is specified within an RTM_GETROUTE message, then a route is searched as if a packet was received on the specified 'iif' interface. However in IPv6, RTA_IIF is not interpreted in the same way: 'inet6_rtm_getroute()' always calls 'ip6_route_output()', regardless the RTA_IIF attribute. As a result, in IPv6 there's no way to use RTM_GETROUTE in order to look for a route as if a packet was received on a specific interface. Fix 'inet6_rtm_getroute()' so that RTA_IIF is interpreted as "lookup a route as if a packet was received on the specified interface", similar to IPv4's 'inet_rtm_getroute()' interpretation. Reported-by: Ami Koren <amikoren@yahoo.com> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-