1. 30 Nov, 2015 1 commit
  2. 26 Nov, 2015 3 commits
  3. 25 Nov, 2015 21 commits
  4. 24 Nov, 2015 9 commits
    • Paolo Bonzini's avatar
      Merge tag 'kvm-arm-for-v4.4-rc3' of... · 8bd142c0
      Paolo Bonzini authored
      Merge tag 'kvm-arm-for-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
      
      KVM/ARM Fixes for v4.4-rc3.
      
      Includes some timer fixes, properly unmapping PTEs, an errata fix, and two
      tweaks to the EL2 panic code.
      8bd142c0
    • Mark Rutland's avatar
      arm64: kvm: report original PAR_EL1 upon panic · fbb4574c
      Mark Rutland authored
      If we call __kvm_hyp_panic while a guest context is active, we call
      __restore_sysregs before acquiring the system register values for the
      panic, in the process throwing away the PAR_EL1 value at the point of
      the panic.
      
      This patch modifies __kvm_hyp_panic to stash the PAR_EL1 value prior to
      restoring host register values, enabling us to report the original
      values at the point of the panic.
      Acked-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      fbb4574c
    • Mark Rutland's avatar
      arm64: kvm: avoid %p in __kvm_hyp_panic · 1d7a4e31
      Mark Rutland authored
      Currently __kvm_hyp_panic uses %p for values which are not pointers,
      such as the ESR value. This can confusingly lead to "(null)" being
      printed for the value.
      
      Use %x instead, and only use %p for host pointers.
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Acked-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Cc: Christoffer Dall <christoffer.dall@linaro.org>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      1d7a4e31
    • Christoffer Dall's avatar
      KVM: arm/arm64: vgic: Trust the LR state for HW IRQs · 9f958c11
      Christoffer Dall authored
      We were probing the physial distributor state for the active state of a
      HW virtual IRQ, because we had seen evidence that the LR state was not
      cleared when the guest deactivated a virtual interrupted.
      
      However, this issue turned out to be a software bug in the GIC, which
      was solved by: 84aab5e68c2a5e1e18d81ae8308c3ce25d501b29
      (KVM: arm/arm64: arch_timer: Preserve physical dist. active
      state on LR.active, 2015-11-24)
      
      Therefore, get rid of the complexities and just look at the LR.
      Reviewed-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      9f958c11
    • Christoffer Dall's avatar
      KVM: arm/arm64: arch_timer: Preserve physical dist. active state on LR.active · 0e3dfda9
      Christoffer Dall authored
      We were incorrectly removing the active state from the physical
      distributor on the timer interrupt when the timer output level was
      deasserted.  We shouldn't be doing this without considering the virtual
      interrupt's active state, because the architecture requires that when an
      LR has the HW bit set and the pending or active bits set, then the
      physical interrupt must also have the corresponding bits set.
      
      This addresses an issue where we have been observing an inconsistency
      between the LR state and the physical distributor state where the LR
      state was active and the physical distributor was not active, which
      shouldn't happen.
      Reviewed-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      0e3dfda9
    • Christoffer Dall's avatar
      KVM: arm/arm64: Fix preemptible timer active state crazyness · 7e16aa81
      Christoffer Dall authored
      We were setting the physical active state on the GIC distributor in a
      preemptible section, which could cause us to set the active state on
      different physical CPU from the one we were actually going to run on,
      hacoc ensues.
      
      Since we are no longer descheduling/scheduling soft timers in the
      flush/sync timer functions, simply moving the timer flush into a
      non-preemptible section.
      Reviewed-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      7e16aa81
    • Marc Zyngier's avatar
      arm64: KVM: Add workaround for Cortex-A57 erratum 834220 · 498cd5c3
      Marc Zyngier authored
      Cortex-A57 parts up to r1p2 can misreport Stage 2 translation faults
      when a Stage 1 permission fault or device alignment fault should
      have been reported.
      
      This patch implements the workaround (which is to validate that the
      Stage-1 translation actually succeeds) by using code patching.
      
      Cc: stable@vger.kernel.org
      Reviewed-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      498cd5c3
    • Marc Zyngier's avatar
      arm64: KVM: Fix AArch32 to AArch64 register mapping · c0f09634
      Marc Zyngier authored
      When running a 32bit guest under a 64bit hypervisor, the ARMv8
      architecture defines a mapping of the 32bit registers in the 64bit
      space. This includes banked registers that are being demultiplexed
      over the 64bit ones.
      
      On exceptions caused by an operation involving a 32bit register, the
      HW exposes the register number in the ESR_EL2 register. It was so
      far understood that SW had to distinguish between AArch32 and AArch64
      accesses (based on the current AArch32 mode and register number).
      
      It turns out that I misinterpreted the ARM ARM, and the clue is in
      D1.20.1: "For some exceptions, the exception syndrome given in the
      ESR_ELx identifies one or more register numbers from the issued
      instruction that generated the exception. Where the exception is
      taken from an Exception level using AArch32 these register numbers
      give the AArch64 view of the register."
      
      Which means that the HW is already giving us the translated version,
      and that we shouldn't try to interpret it at all (for example, doing
      an MMIO operation from the IRQ mode using the LR register leads to
      very unexpected behaviours).
      
      The fix is thus not to perform a call to vcpu_reg32() at all from
      vcpu_reg(), and use whatever register number is supplied directly.
      The only case we need to find out about the mapping is when we
      actively generate a register access, which only occurs when injecting
      a fault in a guest.
      
      Cc: stable@vger.kernel.org
      Reviewed-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      c0f09634
    • Ard Biesheuvel's avatar
      ARM/arm64: KVM: test properly for a PTE's uncachedness · e6fab544
      Ard Biesheuvel authored
      The open coded tests for checking whether a PTE maps a page as
      uncached use a flawed '(pte_val(xxx) & CONST) != CONST' pattern,
      which is not guaranteed to work since the type of a mapping is
      not a set of mutually exclusive bits
      
      For HYP mappings, the type is an index into the MAIR table (i.e, the
      index itself does not contain any information whatsoever about the
      type of the mapping), and for stage-2 mappings it is a bit field where
      normal memory and device types are defined as follows:
      
          #define MT_S2_NORMAL            0xf
          #define MT_S2_DEVICE_nGnRE      0x1
      
      I.e., masking *and* comparing with the latter matches on the former,
      and we have been getting lucky merely because the S2 device mappings
      also have the PTE_UXN bit set, or we would misidentify memory mappings
      as device mappings.
      
      Since the unmap_range() code path (which contains one instance of the
      flawed test) is used both for HYP mappings and stage-2 mappings, and
      considering the difference between the two, it is non-trivial to fix
      this by rewriting the tests in place, as it would involve passing
      down the type of mapping through all the functions.
      
      However, since HYP mappings and stage-2 mappings both deal with host
      physical addresses, we can simply check whether the mapping is backed
      by memory that is managed by the host kernel, and only perform the
      D-cache maintenance if this is the case.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Tested-by: default avatarPavel Fedin <p.fedin@samsung.com>
      Reviewed-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      e6fab544
  5. 23 Nov, 2015 1 commit
  6. 22 Nov, 2015 5 commits
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · 104e2a6f
      Linus Torvalds authored
      Merge slub bulk allocator updates from Andrew Morton:
       "This missed the merge window because I was waiting for some repairs to
        come in.  Nothing actually uses the bulk allocator yet and the changes
        to other code paths are pretty small.  And the net guys are waiting
        for this so they can start merging the client code"
      
      More comments from Jesper Dangaard Brouer:
       "The kmem_cache_alloc_bulk() call, in mm/slub.c, were included in
        previous kernel.  The present version contains a bug.  Vladimir
        Davydov noticed it contained a bug, when kernel is compiled with
        CONFIG_MEMCG_KMEM (see commit 03ec0ed5: "slub: fix kmem cgroup
        bug in kmem_cache_alloc_bulk").  Plus the mem cgroup counterpart in
        kmem_cache_free_bulk() were missing (see commit 03374518 "slub:
        add missing kmem cgroup support to kmem_cache_free_bulk").
      
        I don't consider the fix stable-material because there are no in-tree
        users of the API.
      
        But with known bugs (for memcg) I cannot start using the API in the
        net-tree"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        slab/slub: adjust kmem_cache_alloc_bulk API
        slub: add missing kmem cgroup support to kmem_cache_free_bulk
        slub: fix kmem cgroup bug in kmem_cache_alloc_bulk
        slub: optimize bulk slowpath free by detached freelist
        slub: support for bulk free with SLUB freelists
      104e2a6f
    • Linus Torvalds's avatar
      Merge tag 'tty-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · dcfeda9d
      Linus Torvalds authored
      Pull tty/serial fixes from Greg KH:
       "Here are a few small tty/serial driver fixes for 4.4-rc2 that resolve
        some reported problems.
      
        All have been in linux-next, full details are in the shortlog below"
      
      * tag 'tty-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        serial: export fsl8250_handle_irq
        serial: 8250_mid: Add missing dependency
        tty: audit: Fix audit source
        serial: etraxfs-uart: Fix crash
        serial: fsl_lpuart: Fix earlycon support
        bcm63xx_uart: Use the device name when registering an interrupt
        tty: Fix direct use of tty buffer work
        tty: Fix tty_send_xchar() lock order inversion
      dcfeda9d
    • Linus Torvalds's avatar
      Merge tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 7f217393
      Linus Torvalds authored
      Pull staging/IIO fixes from Greg KH:
       "Here are some staging and iio driver fixes for 4.4-rc2.  All of these
        are in response to issues that have been reported and have been in
        linux-next for a while"
      
      * tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        Revert "Staging: wilc1000: coreconfigurator: Drop unneeded wrapper functions"
        iio: adc: xilinx: Fix VREFN scale
        iio: si7020: Swap data byte order
        iio: adc: vf610_adc: Fix division by zero error
        iio:ad7793: Fix ad7785 product ID
        iio: ad5064: Fix ad5629/ad5669 shift
        iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
        iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
        staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
        vf610_adc: Fix internal temperature calculation
      7f217393
    • Linus Torvalds's avatar
      Merge tag 'usb-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 6d2d91b3
      Linus Torvalds authored
      Pull USB fixes from Greg KH:
       "Here are a number of USB fixes and new device ids for 4.4-rc2.  All
        have been in linux-next and the details are in the shortlog"
      
      * tag 'usb-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
        usblp: do not set TASK_INTERRUPTIBLE before lock
        USB: MAINTAINERS: cxacru
        usb: kconfig: fix warning of select USB_OTG
        USB: option: add XS Stick W100-2 from 4G Systems
        xhci: Fix a race in usb2 LPM resume, blocking U3 for usb2 devices
        usb: xhci: fix checking ep busy for CFC
        xhci: Workaround to get Intel xHCI reset working more reliably
        usb: chipidea: imx: fix a possible NULL dereference
        usb: chipidea: usbmisc_imx: fix a possible NULL dereference
        usb: chipidea: otg: gadget module load and unload support
        usb: chipidea: debug: disable usb irq while role switch
        ARM: dts: imx27.dtsi: change the clock information for usb
        usb: chipidea: imx: refine clock operations to adapt for all platforms
        usb: gadget: atmel_usba_udc: Expose correct device speed
        usb: musb: enable usb_dma parameter
        usb: phy: phy-mxs-usb: fix a possible NULL dereference
        usb: dwc3: gadget: let us set lower max_speed
        usb: musb: fix tx fifo flush handling
        usb: gadget: f_loopback: fix the warning during the enumeration
        usb: dwc2: host: Fix remote wakeup when not in DWC2_L2
        ...
      6d2d91b3
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 0ec7dc8d
      Linus Torvalds authored
      Pull MIPS fixes from Ralf Baechle:
      
       - Fix a flood of annoying build warnings
      
       - A number of fixes for Atheros 79xx platforms
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: ath79: Add a machine entry for booting OF machines
        MIPS: ath79: Fix the size of the MISC INTC registers in ar9132.dtsi
        MIPS: ath79: Fix the DDR control initialization on ar71xx and ar934x
        MIPS: Fix flood of warnings about comparsion being always true.
      0ec7dc8d