- 18 Feb, 2019 11 commits
-
-
Sean Wang authored
Update the setup sequence on MT7622 to apply the same flow with MT7663U and MT7668U USB [1] as much as possible. These additional commands are required to parse the corresponding event to determine what current state the Bluetooth device is on and thus it's necessary to extend mtk_hci_wmt_sync to support the reading status in the same patch. [1] http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017074.htmlSigned-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Sean Wang authored
Pass a structure pointer to mtk_hci_wmt_sync rather than several arguments to avoid take up additional stack area and be better to read the code. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Sean Wang authored
Restore bdev->tx_state with clearing bit BTMTKUART_TX_WAIT_VND_EVT when there is an error on waiting for the corresponding event. Fixes: 7237c4c9 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Sean Wang authored
add a trivial typo fix from speicfic to specific Fixes: 7237c4c9 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); instance = alloc(size, GFP_KERNEL) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, change the following form: sizeof(*ev) + ev->num_hndl * sizeof(struct hci_comp_pkts_info) to : struct_size(ev, handles, ev->num_hndl) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Jeremy Cline authored
The hci_dev struct hdev is referenced in work queues and timers started by open() in some protocols. This creates a race between the initialization function and the work or timer which can result hdev being dereferenced while it is still null. The syzbot report contains a reliable reproducer which causes a null pointer dereference of hdev in hci_uart_write_work() by making the memory allocation for hdev fail. To fix this, ensure hdev is valid from before calling a protocol's open() until after calling a protocol's close(). Reported-by: syzbot+257790c15bcdef6fe00c@syzkaller.appspotmail.com Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Balakrishna Godavarthi authored
During hci down we observed IBS sleep commands are queued in the Tx buffer and hci_uart_write_work is sending data to the chip which is not required as the chip is powered off. This patch will disable IBS and flush the Tx buffer before we turn off the chip. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Balakrishna Godavarthi authored
This patch will help to stop frame reassembly errors while changing the baudrate. This is because host send a change baudrate request command to the chip with 115200 bps, Whereas chip will change their UART clocks to the enable for new baudrate and sends the response for the change request command with newer baudrate, On host side we are still operating in 115200 bps which results of reading garbage data. Here we are pulling RTS line, so that chip we will wait to send data to host until host change its baudrate. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Balakrishna Godavarthi authored
wcn3990 requires a power pulse to turn ON/OFF along with regulators. Sometimes we are observing the power pulses are sent out with some time delay, due to queuing these commands. This is causing synchronization issues with chip, which intern delay the chip setup or may end up with communication issues. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Colin Ian King authored
Variable count is never zero inside the loop so the check if count is zero is redundant and can be removed. Fix this. Detected by CoverityScan, CID#1466880 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 04 Feb, 2019 1 commit
-
-
Myungho Jung authored
When releasing socket, it is possible to enter hci_sock_release() and hci_sock_dev_event(HCI_DEV_UNREG) at the same time in different thread. The reference count of hdev should be decremented only once from one of them but if storing hdev to local variable in hci_sock_release() before detached from socket and setting to NULL in hci_sock_dev_event(), hci_dev_put(hdev) is unexpectedly called twice. This is resolved by referencing hdev from socket after bt_sock_unlink() in hci_sock_release(). Reported-by: syzbot+fdc00003f4efff43bc5b@syzkaller.appspotmail.com Signed-off-by: Myungho Jung <mhjungk@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 29 Jan, 2019 2 commits
-
-
Raghuram Hegde authored
If BT operations (BREDR inquiry/LE scan) were triggered through the stack, followed by BT turn off through 'hciconfig hci0 down', the controller would still be active and consume power. Also, there is a possibility that a race condition/ synchronization issue might arise on the subsequent BT turn on, as the controller might try to push the events that were queued up before processing the HCI Reset command. btusb_shutdown_intel_new routine shall reset the controller and stop all BT operation. Advantages: 1. Power save on the platform 2. Host and controller will be in Sync. Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Rajat Jain authored
The btusb_intel_cmd_timeout() is called from workqueue contexts, so use the helper functions that can sleep. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 28 Jan, 2019 1 commit
-
-
Kai-Heng Feng authored
Realtek bluetooth may not work after reboot: [ 12.446130] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008 This is a regression introduced by commit 26503ad2 ("Bluetooth: btrtl: split the device initialization into smaller parts"). The new logic errors out early when no matching IC info can be found, in this case it means the firmware is already loaded. So let's assume the firmware is already loaded when we can't find matching IC info, like the old logic did. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201921 Fixes: 26503ad2 ("Bluetooth: btrtl: split the device initialization into smaller parts") Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 25 Jan, 2019 5 commits
-
-
Colin Ian King authored
Don't populate the const array hw_err on the stack but instead make it static. Makes the object code smaller by 45 bytes: Before: text data bss dec hex filename 100880 21090 1088 123058 1e0b2 linux/net/bluetooth/hci_core.o After: text data bss dec hex filename 100739 21186 1088 123013 1e085 linux/net/bluetooth/hci_core.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Rajat Jain authored
If the platform provides it, use the reset gpio to reset the Intel BT chip, as part of cmd_timeout handling. This has been found helpful on Intel bluetooth controllers where the firmware gets stuck and the only way out is a hard reset pin provided by the platform. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Rajat Jain authored
Add a hook to allow the BT driver to do device or command specific handling in case of timeouts. This is to be used by Intel driver to reset the device after certain number of timeouts. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Dmitry Torokhov authored
USB devices permanently connected to USB ports may be described in ACPI tables and share ACPI devices with ports they are connected to. See [1] for details. This will allow us to describe sideband resources for devices, such as, for example, hard reset line for BT USB controllers. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/other-acpi-namespace-objects#acpi-namespace-hierarchy-and-adr-for-embedded-usb-devicesSigned-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Rajat Jain <rajatja@google.com> (changed how we get the usb_port) Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Dmitry Torokhov authored
In preparation for handling embedded USB devices let's split usb_acpi_find_companion() into usb_acpi_find_companion_for_device() and usb_acpi_find_companion_for_port(). Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Rajat Jain <rajatja@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 23 Jan, 2019 3 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: net/bluetooth/rfcomm/core.c:479:6: warning: this statement may fall through [-Wimplicit-fallthrough=] net/bluetooth/l2cap_core.c:4223:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
The function l2cap_get_conf_opt will return L2CAP_CONF_OPT_SIZE + opt->len as length value. The opt->len however is in control over the remote user and can be used by an attacker to gain access beyond the bounds of the actual packet. To prevent any potential leak of heap memory, it is enough to check that the resulting len calculation after calling l2cap_get_conf_opt is not below zero. A well formed packet will always return >= 0 here and will end with the length value being zero after the last option has been parsed. In case of malformed packets messing with the opt->len field the length value will become negative. If that is the case, then just abort and ignore the option. In case an attacker uses a too short opt->len value, then garbage will be parsed, but that is protected by the unknown option handling and also the option parameter size checks. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When doing option parsing for standard type values of 1, 2 or 4 octets, the value is converted directly into a variable instead of a pointer. To avoid being tricked into being a pointer, check that for these option types that sizes actually match. In L2CAP every option is fixed size and thus it is prudent anyway to ensure that the remote side sends us the right option size along with option paramters. If the option size is not matching the option type, then that option is silently ignored. It is a protocol violation and instead of trying to give the remote attacker any further hints just pretend that option is not present and proceed with the default values. Implementation following the specification and its qualification procedures will always use the correct size and thus not being impacted here. To keep the code readable and consistent accross all options, a few cosmetic changes were also required. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
- 22 Jan, 2019 9 commits
-
-
Linus Walleij authored
I can't see that these drivers use the old GPIO inlcudes in any way, drop <linux/gpio.h> and <linux/of_gpio.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Matthias Kaehlcke authored
With commit e1633762 ("Bluetooth: Handle bt_accept_enqueue() socket atomically") lock_sock[_nested]() is used to acquire the socket lock before manipulating the socket. lock_sock[_nested]() may block, which is problematic since bt_accept_enqueue() can be called in bottom half context (e.g. from rfcomm_connect_ind()): [<ffffff80080d81ec>] __might_sleep+0x4c/0x80 [<ffffff800876c7b0>] lock_sock_nested+0x24/0x58 [<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth] [<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm] Add a parameter to bt_accept_enqueue() to indicate whether the function is called from BH context, and acquire the socket lock with bh_lock_sock_nested() if that's the case. Also adapt all callers of bt_accept_enqueue() to pass the new parameter: - l2cap_sock_new_connection_cb() - uses lock_sock() to lock the parent socket => process context - rfcomm_connect_ind() - acquires the parent socket lock with bh_lock_sock() => BH context - __sco_chan_add() - called from sco_chan_add(), which is called from sco_connect(). parent is NULL, hence bt_accept_enqueue() isn't called in this code path and we can ignore it - also called from sco_conn_ready(). uses bh_lock_sock() to acquire the parent lock => BH context Fixes: e1633762 ("Bluetooth: Handle bt_accept_enqueue() socket atomically") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
-
Hemantkumar Suthar authored
This patch adds support for 8977 chipset to mwifiex with SDIO interface. Register offsets and supported feature flags are updated. Firmware image used will be mrvl/sd8977_uapsta.bin. Signed-off-by: Hemantkumar Suthar <shemant@marvell.com> Signed-off-by: Rakesh Parmar <rakeshp@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Myungho Jung authored
h4_recv_buf() callers store the return value to socket buffer and recursively pass the buffer to h4_recv_buf() without protection. So, ERR_PTR returned from h4_recv_buf() can be dereferenced, if called again before setting the socket buffer to NULL from previous error. Check if skb is ERR_PTR in h4_recv_buf(). Reported-by: syzbot+017a32f149406df32703@syzkaller.appspotmail.com Signed-off-by: Myungho Jung <mhjungk@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Stefan Agner authored
The platform specific wake-up interrupt is optional. Don't print an error message in case it is missing, merely inform the user in this case. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Stefan Agner authored
Use dev_* variants to print messages in drivers. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
YueHaibing authored
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
YueHaibing authored
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Balakrishna Godavarthi authored
This patch add qca_set_bdaddr() to set the device address for latest Qualcomm Bluetooth chipset wcn3990 and above. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 21 Jan, 2019 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Completely minor snmp doc conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Fix console ramoops to show the previous boot logs (Sai Prakash Ranjan) - Avoid allocation and leak of platform data * tag 'pstore-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Avoid allocation and leak of platform data pstore/ram: Fix console ramoops to show the previous boot logs
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Fix ARM per-task stack protector plugin under GCC 9 (Ard Biesheuvel)" * tag 'gcc-plugins-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: arm_ssp_per_task_plugin: fix for GCC 9+ gcc-plugins: arm_ssp_per_task_plugin: sign extend the SP mask
-
- 20 Jan, 2019 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...
-
Kees Cook authored
Yue Hu noticed that when parsing device tree the allocated platform data was never freed. Since it's not used beyond the function scope, this switches to using a stack variable instead. Reported-by: Yue Hu <huyue2@yulong.com> Fixes: 35da6094 ("pstore/ram: add Device Tree bindings") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
-
Ard Biesheuvel authored
GCC 9 reworks the way the references to the stack canary are emitted, to prevent the value from being spilled to the stack before the final comparison in the epilogue, defeating the purpose, given that the spill slot is under control of the attacker that we are protecting ourselves from. Since our canary value address is obtained without accessing memory (as opposed to pre-v7 code that will obtain it from a literal pool), it is unlikely (although not guaranteed) that the compiler will spill the canary value in the same way, so let's just disable this improvement when building with GCC9+. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Kees Cook <keescook@chromium.org>
-
Ard Biesheuvel authored
The ARM per-task stack protector GCC plugin hits an assert in the compiler in some case, due to the fact the the SP mask expression is not sign-extended as it should be. So fix that. Suggested-by: Kugan Vivekanandarajah <kugan.vivekanandarajah@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Kees Cook <keescook@chromium.org>
-