- 08 Feb, 2018 32 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.16 The most important here is the ssb fix, it has been reported by the users frequently and the fix just missed the final v4.15. Also numerous other fixes, mt76 had multiple problems with aggregation and a long standing unaligned access bug in rtlwifi is finally fixed. Major changes: ath10k * correct firmware RAM dump length for QCA6174/QCA9377 * add new QCA988X device id * fix a kernel panic during pci probe * revert a recent commit which broke ath10k firmware metadata parsing ath9k * fix a noise floor regression introduced during the merge window * add new device id rtlwifi * fix unaligned access seen on ARM architecture mt76 * various aggregation fixes which fix connection stalls ssb * fix b43 and b44 on non-MIPS which broke in v4.15-rc9 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hoang Le authored
In commit d618d09a ("tipc: enforce valid ratio between skb truesize and contents") we introduced a test for ensuring that the condition truesize/datasize <= 4 is true for a received buffer. Unfortunately this test has two problems. - Because of the integer arithmetics the test if (skb->truesize / buf_roundup_len(skb) > 4) will miss all ratios [4 < ratio < 5], which was not the intention. - The buffer returned by skb_copy() inherits skb->truesize of the original buffer, which doesn't help the situation at all. In this commit, we change the ratio condition and replace skb_copy() with a call to skb_copy_expand() to finally get this right. Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Ivan Vecera authored
The following sequence is currently broken: # tc qdisc add dev foo ingress # tc filter replace dev foo protocol all ingress \ u32 match u8 0 0 action mirred egress mirror dev bar1 # tc filter replace dev foo protocol all ingress \ handle 800::800 pref 49152 \ u32 match u8 0 0 action mirred egress mirror dev bar2 Error: cls_u32: Key node flags do not match passed flags. We have an error talking to the kernel, -1 The error comes from u32_change() when comparing new and existing flags. The existing ones always contains one of TCA_CLS_FLAGS_{,NOT}_IN_HW flag depending on offloading state. These flags cannot be passed from userspace so the condition (n->flags != flags) in u32_change() always fails. Fix the condition so the flags TCA_CLS_FLAGS_NOT_IN_HW and TCA_CLS_FLAGS_IN_HW are not taken into account. Fixes: 24d3dc6d ("net/sched: cls_u32: Reflect HW offload status") Signed-off-by:Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Dan Williams authored
mpls_label_ok() validates that the 'platform_label' array index from a userspace netlink message payload is valid. Under speculation the mpls_label_ok() result may not resolve in the CPU pipeline until after the index is used to access an array element. Sanitize the index to zero to prevent userspace-controlled arbitrary out-of-bounds speculation, a precursor for a speculative execution side channel vulnerability. Cc: <stable@vger.kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Sowmini Varadhan authored
rds: tcp: use rds_destroy_pending() to synchronize netns/module teardown and rds connection/workq management An rds_connection can get added during netns deletion between lines 528 and 529 of 506 static void rds_tcp_kill_sock(struct net *net) : /* code to pull out all the rds_connections that should be destroyed */ : 528 spin_unlock_irq(&rds_tcp_conn_lock); 529 list_for_each_entry_safe(tc, _tc, &tmp_list, t_tcp_node) 530 rds_conn_destroy(tc->t_cpath->cp_conn); Such an rds_connection would miss out the rds_conn_destroy() loop (that cancels all pending work) and (if it was scheduled after netns deletion) could trigger the use-after-free. A similar race-window exists for the module unload path in rds_tcp_exit -> rds_tcp_destroy_conns Concurrency with netns deletion (rds_tcp_kill_sock()) must be handled by checking check_net() before enqueuing new work or adding new connections. Concurrency with module-unload is handled by maintaining a module specific flag that is set at the start of the module exit function, and must be checked before enqueuing new work or adding new connections. This commit refactors existing RDS_DESTROY_PENDING checks added by commit 3db6e0d1 ("rds: use RCU to synchronize work-enqueue with connection teardown") and consolidates all the concurrency checks listed above into the function rds_destroy_pending(). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Kees Cook authored
Most callers of put_cmsg() use a "sizeof(foo)" for the length argument. Within put_cmsg(), a copy_to_user() call is made with a dynamic size, as a result of the cmsg header calculations. This means that hardened usercopy will examine the copy, even though it was technically a fixed size and should be implicitly whitelisted. All the put_cmsg() calls being built from values in skbuff_head_cache are coming out of the protocol-defined "cb" field, so whitelist this field entirely instead of creating per-use bounce buffers, for which there are concerns about performance. Original report was: Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLAB object 'skbuff_head_cache' (offset 64, size 16)! WARNING: CPU: 0 PID: 3663 at mm/usercopy.c:81 usercopy_warn+0xdb/0x100 mm/usercopy.c:76 ... __check_heap_object+0x89/0xc0 mm/slab.c:4426 check_heap_object mm/usercopy.c:236 [inline] __check_object_size+0x272/0x530 mm/usercopy.c:259 check_object_size include/linux/thread_info.h:112 [inline] check_copy_size include/linux/thread_info.h:143 [inline] copy_to_user include/linux/uaccess.h:154 [inline] put_cmsg+0x233/0x3f0 net/core/scm.c:242 sock_recv_errqueue+0x200/0x3e0 net/core/sock.c:2913 packet_recvmsg+0xb2e/0x17a0 net/packet/af_packet.c:3296 sock_recvmsg_nosec net/socket.c:803 [inline] sock_recvmsg+0xc9/0x110 net/socket.c:810 ___sys_recvmsg+0x2a4/0x640 net/socket.c:2179 __sys_recvmmsg+0x2a9/0xaf0 net/socket.c:2287 SYSC_recvmmsg net/socket.c:2368 [inline] SyS_recvmmsg+0xc4/0x160 net/socket.c:2352 entry_SYSCALL_64_fastpath+0x29/0xa0 Reported-by: syzbot+e2d6cfb305e9f3911dea@syzkaller.appspotmail.com Fixes: 6d07d1cd ("usercopy: Restrict non-usercopy caches to size 0") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Mathieu Malaterre authored
In commit c7f5d105 ("net: Add eth_platform_get_mac_address() helper."), two declarations were added: int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr); unsigned char *arch_get_platform_get_mac_address(void); An extra '_get' was introduced in arch_get_platform_get_mac_address, remove it. Fix compile warning using W=1: CC net/ethernet/eth.o net/ethernet/eth.c:523:24: warning: no previous prototype for ‘arch_get_platform_mac_address’ [-Wmissing-prototypes] unsigned char * __weak arch_get_platform_mac_address(void) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ AR net/ethernet/built-in.o Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Nathan Fontenot authored
While handling a driver reset we get a H_CLOSED return trying to send a CRQ event. When this occurs we need to queue up another reset attempt. Without doing this we see instances where the driver is left in a closed state because the reset failed and there is no further attempts to reset the driver. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Add suffix ULL to constants 272, 204, 136 and 68 in order to give the compiler complete information about the proper arithmetic to use. Notice that these constants are used in contexts that expect expressions of type unsigned long long (64 bits, unsigned). The following expressions are currently being evaluated using 32-bit arithmetic: 272 * mult 204 * mult 136 * mult 68 * mult Addresses-Coverity-ID: 201058 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Christian Brauner authored
Since we've added support for IFLA_IF_NETNSID for RTM_{DEL,GET,SET,NEW}LINK it is possible for userspace to send us requests with three different properties to identify a target network namespace. This affects at least RTM_{NEW,SET}LINK. Each of them could potentially refer to a different network namespace which is confusing. For legacy reasons the kernel will pick the IFLA_NET_NS_PID property first and then look for the IFLA_NET_NS_FD property but there is no reason to extend this type of behavior to network namespace ids. The regression potential is quite minimal since the rtnetlink requests in question either won't allow IFLA_IF_NETNSID requests before 4.16 is out (RTM_{NEW,SET}LINK) or don't support IFLA_NET_NS_{PID,FD} (RTM_{DEL,GET}LINK) in the first place. Signed-off-by:Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jason Wang authored
When using devmap to redirect packets between interfaces, xdp_do_flush() is usually a must to flush any batched packets. Unfortunately this is missed in current tuntap implementation. Unlike most hardware driver which did XDP inside NAPI loop and call xdp_do_flush() at then end of each round of poll. TAP did it in the context of process e.g tun_get_user(). So fix this by count the pending redirected packets and flush when it exceeds NAPI_POLL_WEIGHT or MSG_MORE was cleared by sendmsg() caller. With this fix, xdp_redirect_map works again between two TAPs. Fixes: 761876c8 ("tap: XDP support") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Nicolas Dichtel authored
Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the case when commit 134e6375 was pushed. However, there was no reason to stop the loop if a netns does not have listeners. Returns -ESRCH only if there was no listeners in all netns. To avoid having the same problem in the future, I didn't take the assumption that nlmsg_multicast() returns only 0 or -ESRCH. Fixes: 134e6375 ("genetlink: make netns aware") CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
David Howells authored
Don't put buffers of data to be handed to crypto on the stack as this may cause an assertion failure in the kernel (see below). Fix this by using an kmalloc'd buffer instead. kernel BUG at ./include/linux/scatterlist.h:147! ... RIP: 0010:rxkad_encrypt_response.isra.6+0x191/0x1b0 [rxrpc] RSP: 0018:ffffbe2fc06cfca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff989277d59900 RCX: 0000000000000028 RDX: 0000259dc06cfd88 RSI: 0000000000000025 RDI: ffffbe30406cfd88 RBP: ffffbe2fc06cfd60 R08: ffffbe2fc06cfd08 R09: ffffbe2fc06cfd08 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff7c5f80d9f95 R13: ffffbe2fc06cfd88 R14: ffff98927a3f7aa0 R15: ffffbe2fc06cfd08 FS: 0000000000000000(0000) GS:ffff98927fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b1ff28f0f8 CR3: 000000001b412003 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxkad_respond_to_challenge+0x297/0x330 [rxrpc] rxrpc_process_connection+0xd1/0x690 [rxrpc] ? process_one_work+0x1c3/0x680 ? __lock_is_held+0x59/0xa0 process_one_work+0x249/0x680 worker_thread+0x3a/0x390 ? process_one_work+0x680/0x680 kthread+0x121/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 Reported-by:
Jonathan Billings <jsbillings@jsbillings.org> Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git fixes for 4.16. Major changes: ath10k * correct firmware RAM dump length for QCA6174/QCA9377 * add new QCA988X device id * fix a kernel panic during pci probe * revert a recent commit which broke ath10k firmware metadata parsing ath9k * fix a noise floor regression introduced during the merge window * add new device id
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: fix disabling TC offloads in flower, max TSO segs and module version This set corrects the way nfp deals with the NETIF_F_HW_TC flag. It has slipped the review that flower offload does not currently refuse disabling this flag when filter offload is active. nfp's flower offload does not actually keep track of how many filters for each port are offloaded. The accounting of the number of filters is added to the nfp core structures, and BPF moved to use these structures as well. If users are allowed to disable TC offloads while filters are active, not only is it incorrect behaviour, but actually the NFP will never be told to remove the flows, leading to use-after-free when stats arrive. Fourth patch makes sure we declare the max number of TSO segments. FW should drop longer packets cleanly (otherwise this would be a security problem for untrusted VFs) but dropping longer TSO frames is not nice and driver should prevent them from being generated. Last small addition populates MODULE_VERSION with kernel version. ==================== Signed-off-by: -
Jakub Kicinski authored
DKMS and similar out-of-tree module replacement services use module version to make sure the out-of-tree software is not older than the module shipped with the kernel. We use the kernel version in ethtool -i output, put it into MODULE_VERSION as well. Reported-by:
Jan Gutter <jan.gutter@netronome.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Most FWs limit the number of TSO segments a frame can produce to 64. This is for fairness and efficiency (of FW datapath) reasons. If a frame with larger number of segments is submitted the FW will drop it. Signed-off-by:
-
Jakub Kicinski authored
All netdevs which can accept TC offloads must implement .ndo_set_features(). nfp_reprs currently do not do that, which means hw-tc-offload can be turned on and off even when offloads are active. Whether the offloads are active is really a question to nfp_ports, so remove the per-app tc_busy callback indirection thing, and simply count the number of offloaded items in nfp_port structure. Fixes: 8a276873 ("nfp: provide infrastructure for offloading flower based TC filters") Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
nfp_port is a structure which represents an ASIC port, both PCIe vNIC (on a PF or a VF) or the external MAC port. vNIC netdev (struct nfp_net) and pure representor netdev (struct nfp_repr) both have a pointer to this structure. nfp_reprs always have a port associated. nfp_nets, however, only represent a device port in legacy mode, where they are considered the MAC port. In switchdev mode they are just the CPU's side of the PCIe link. By definition TC offloads only apply to device ports. Don't set the flag on vNICs without a port (i.e. in switchdev mode). Signed-off-by:
-
Jakub Kicinski authored
Upcoming changes will require all netdevs supporting TC offloads to have a full struct nfp_port. Require those for BPF offload. The operation without management FW reporting information about Ethernet ports is something we only support for very old and very basic NIC firmwares anyway. Signed-off-by:
-
Ryan Hsu authored
This reverts commit 9ed4f916. The commit introduced a regression that over read the ie with the padding. - the expected IE information ath10k_pci 0000:03:00.0: found firmware features ie (1 B) ath10k_pci 0000:03:00.0: Enabling feature bit: 6 ath10k_pci 0000:03:00.0: Enabling feature bit: 7 ath10k_pci 0000:03:00.0: features ath10k_pci 0000:03:00.0: 00000000: c0 00 00 00 00 00 00 00 - the wrong IE with padding is read (0x77) ath10k_pci 0000:03:00.0: found firmware features ie (4 B) ath10k_pci 0000:03:00.0: Enabling feature bit: 6 ath10k_pci 0000:03:00.0: Enabling feature bit: 7 ath10k_pci 0000:03:00.0: Enabling feature bit: 8 ath10k_pci 0000:03:00.0: Enabling feature bit: 9 ath10k_pci 0000:03:00.0: Enabling feature bit: 10 ath10k_pci 0000:03:00.0: Enabling feature bit: 12 ath10k_pci 0000:03:00.0: Enabling feature bit: 13 ath10k_pci 0000:03:00.0: Enabling feature bit: 14 ath10k_pci 0000:03:00.0: Enabling feature bit: 16 ath10k_pci 0000:03:00.0: Enabling feature bit: 17 ath10k_pci 0000:03:00.0: Enabling feature bit: 18 ath10k_pci 0000:03:00.0: features ath10k_pci 0000:03:00.0: 00000000: c0 77 07 00 00 00 00 00 Tested-by:
Mike Lothian <mike@fireburn.co.uk> Signed-off-by:
Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Song Liu authored
tracepoint tcp_send_reset requires a full socket to work. However, it may be called when in TCP_TIME_WAIT: case TCP_TW_RST: tcp_v6_send_reset(sk, skb); inet_twsk_deschedule_put(inet_twsk(sk)); goto discard_it; To avoid this problem, this patch checks the socket with sk_fullsock() before calling trace_tcp_send_reset(). Fixes: c24b14c4 ("tcp: add tracepoint trace_tcp_send_reset") Signed-off-by:Song Liu <songliubraving@fb.com> Reviewed-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
-
Md. Islam authored
In Kernel 4.15.0+, Netem does not work properly. Netem setup: tc qdisc add dev h1-eth0 root handle 1: netem delay 10ms 2ms Result: PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data. 64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=22.8 ms 64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=10.9 ms 64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=10.9 ms 64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=11.4 ms 64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms 64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=4303 ms 64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.2 ms 64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.3 ms 64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=4304 ms 64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=4303 ms Patch: (rnd % (2 * sigma)) - sigma was overflowing s32. After applying the patch, I found following output which is desirable. PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data. 64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=21.1 ms 64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=8.46 ms 64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=9.00 ms 64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=11.8 ms 64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=8.36 ms 64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms 64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=8.11 ms 64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=10.0 ms 64 bytes from 172.16.101.2: icmp_seq=9 ttl=64 time=11.3 ms 64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.5 ms 64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.2 ms Reviewed-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Grygorii Strashko authored
It was discovered that simple program which indefinitely sends 200b UDP packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog timeout is triggered due to race between cpsw_ndo_start_xmit() and cpsw_tx_handler() [NAPI] cpsw_ndo_start_xmit() if (unlikely(!cpdma_check_free_tx_desc(txch))) { txq = netdev_get_tx_queue(ndev, q_idx); netif_tx_stop_queue(txq); ^^ as per [1] barier has to be used after set_bit() otherwise new value might not be visible to other cpus } cpsw_tx_handler() if (unlikely(netif_tx_queue_stopped(txq))) netif_tx_wake_queue(txq); and when it happens ndev TX queue became disabled forever while driver's HW TX queue is empty. Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue() calls and double check for free TX descriptors after stopping ndev TX queue - if there are free TX descriptors wake up ndev TX queue. [1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.htmlSigned-off-by:Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Thomas Falcon authored
This change will guard against a double free in the case that the buffers were previously freed at some other time, such as during a device reset. It resolves a kernel oops that occurred when changing the VNIC device's MTU. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
John Allen authored
At some point, a check was added to exit the polling routine during resets. This makes sense for most reset conditions, but for a non-fatal error, we expect the polling routine to continue running to properly clean up the rx queues. This patch checks if we are performing a non-fatal reset and if we are, continues normal polling operation. Signed-off-by:
John Allen <jallen@linux.vnet.ibm.com> Signed-off-by:
-
Amritha Nambiar authored
Fix the number of queues per enabled TC and report available queues to the kernel without having to limit them to the max RSS limit so they are available to be mapped for XPS. This allows a queue per processing thread available for handling traffic for the given traffic class. Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
David Ahern authored
Because of differences in how ipv4 and ipv6 handle fib lookups, verification of nexthops with onlink flag need to default to the main table rather than the local table used by IPv4. As it stands an address within a connected route on device 1 can be used with onlink on device 2. Updating the table properly rejects the route due to the egress device mismatch. Update the extack message as well to show it could be a device mismatch for the nexthop spec. Fixes: fc1e64e1 ("net/ipv6: Add support for onlink flag") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
Verification of nexthops with onlink flag need to handle unreachable routes. The lookup is only intended to validate the gateway address is not a local address and if the gateway resolves the egress device must match the given device. Hence, hitting any default reject route is ok. Fixes: fc1e64e1 ("net/ipv6: Add support for onlink flag") Signed-off-by:
-
Shannon Nelson authored
Add the appropriate SPDX license tags to the Sun network drivers as outlined in Documentation/process/license-rules.rst. Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
David Howells authored
AF_RXRPC is incorrectly sending back to the server any abort it receives for a client connection. This is due to the final-ACK offload to the connection event processor patch. The abort code is copied into the last-call information on the connection channel and then the event processor is set. Instead, the following should be done: (1) In the case of a final-ACK for a successful call, the ACK should be scheduled as before. (2) In the case of a locally generated ABORT, the ABORT details should be cached for sending in response to further packets related to that call and no further action scheduled at call disconnect time. (3) In the case of an ACK received from the peer, the call should be considered dead, no ABORT should be transmitted at this time. In response to further non-ABORT packets from the peer relating to this call, an RX_USER_ABORT ABORT should be transmitted. (4) In the case of a call killed due to network error, an RX_USER_ABORT ABORT should be cached for transmission in response to further packets, but no ABORT should be sent at this time. Fixes: 3136ef49 ("rxrpc: Delay terminal ACK transmission on a client call") Signed-off-by: -
Christophe JAILLET authored
Commit baf50868 ("cxgb4: restructure VF mgmt code") has reordered some code but an error handling label has not been updated accordingly. So fix it and free 'adapter' if 't4_wait_dev_ready()' fails. Fixes: baf50868 ("cxgb4: restructure VF mgmt code") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 07 Feb, 2018 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for you net tree, they are: 1) Restore __GFP_NORETRY in xt_table allocations to mitigate effects of large memory allocation requests, from Michal Hocko. 2) Release IPv6 fragment queue in case of error in fragmentation header, this is a follow up to amend patch 83f1999c, from Subash Abhinov Kasiviswanathan. 3) Flowtable infrastructure depends on NETFILTER_INGRESS as it registers a hook for each flowtable, reported by John Crispin. 4) Missing initialization of info->priv in xt_cgroup version 1, from Cong Wang. 5) Give a chance to garbage collector to run after scheduling flowtable cleanup. 6) Releasing flowtable content on nft_flow_offload module removal is not required at all, there is not dependencies between this module and flowtables, remove it. 7) Fix missing xt_rateest_mutex grabbing for hash insertions, also from Cong Wang. 8) Move nf_flow_table_cleanup() routine to flowtable core, this patch is a dependency for the next patch in this list. 9) Flowtable resources are not properly released on removal from the control plane. Fix this resource leak by scheduling removal of all entries and explicit call to the garbage collector. 10) nf_ct_nat_offset() declaration is dead code, this function prototype is not used anywhere, remove it. From Taehee Yoo. 11) Fix another flowtable resource leak on entry insertion failures, this patch also fixes a possible use-after-free. Patch from Felix Fietkau. ==================== Signed-off-by:
-
Oleksij Rempel authored
as reported in: https://github.com/qca/open-ath9k-htc-firmware/pull/71#issuecomment-361100070Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
-
Yu Wang authored
If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by:
Yu Wang <yyuwang@codeaurora.org> Signed-off-by:
-
Wojciech Dubowik authored
Commit 8da58553 ("ath9k: Use calibrated noise floor value when available") introduced regression in ath9k_hw_getchan_noise where per chain nominal noise floor has been taken instead default for channel. Revert to original default channel noise floor. Fixes: 8da58553 ("ath9k: Use calibrated noise floor value when available") Reported-by:
Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by:
Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by:
-
Tobias Schramm authored
Some modern Ubiquiti devices contain a rebranded QCA988X rev2 with a custom Ubiquiti vendor and device id. This patch adds support for those devices, treating them as a QCA988X v2. Signed-off-by:
Tobias Schramm <tobleminer@gmail.com> [kvalo@codeaurora.org: rebase, add missing fields in hw_params, fix a long line in pci.c:61] Signed-off-by:
-
Tobias Schramm authored
Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Yu Wang authored
The length of DRAM dump for QCA6174 hw3.0/hw3.2 and QCA9377 hw1.1 are less than the actual value, some coredump contents are missed. To fix it, change the length from 0x90000 to 0xa8000. Fixes: 703f261d ("ath10k: add memory dump support for QCA6174/QCA9377") Signed-off-by:
-
Larry Finger authored
There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b163 ("rtlwifi: rtl8821ae: Fix connection lost problem"). Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih <pkshih@realtek.com>, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary. Fixes: b8b8b163 ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable@vger.kernel.org> # 4.14+ Fix-suggested-by:
Pkshih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by: James Cameron <quozl@laptop.org> # x86_64 OLPC NL3 Signed-off-by:
-
