- 09 Sep, 2014 3 commits
-
-
Marek Szyprowski authored
This patch fixes possible freeze caused by infinite loop in interrupt context. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kamil Debski authored
In the Generic PHY Framework a NULL phy is considered to be a valid phy thus the "if (hsotg->phy)" check does not give us the information whether the Generic PHY Framework is used. In addition to the above this patch also removes phy_init from probe and phy_exit from remove. This is not necessary when init/exit is done in the s3c_hsotg_phy_enable/disable functions. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kamil Debski authored
When the driver is removed s3c_hsotg_phy_disable is called three times instead of once. This results in decreasing of the phy reference counter below zero and thus consecutive inserts of the module fails. This patch removes calls to s3c_hsotg_phy_disable from s3c_hsotg_remove and s3c_hsotg_udc_stop. s3c_hsotg_udc_stop is called from udc-core.c only after usb_gadget_disconnect, which in turn calls s3c_hsotg_pullup, which already calls s3c_hsotg_phy_disable. s3c_hsotg_remove must be called only after udc_stop, so there is no point in disabling phy once again there. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 Sep, 2014 4 commits
-
-
Thomas Pugliese authored
Make sure the uwb_dev->bce entry is set before calling uwb_dev_add in uwbd_dev_onair so that usermode will only see the device after it is properly initialized. This fixes a kernel panic that can occur if usermode tries to access the IEs sysfs attribute of a UWB device before the driver has had a chance to set the beacon cache entry. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Taylor Braun-Jones authored
Signed-off-by: Taylor Braun-Jones <taylor.braun-jones@ge.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
Commit d24d481b (usb-storage: Modify and export adjust_quirks so that it can be used by uas) added the 'u' flag to the quirks module parameter for usb-storage, but neglected to update the documentation. This patch adds the documentation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> # 3.15+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felipe Balbi authored
Commit 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) implemented a workaround for a known issue with Texas Instruments' USB 3.0 redriver IC but it left a condition where any xHCI host would be taken out of reset if port was placed in compliance mode and there was no device connected to the port. That condition would trigger a fake connection to a non-existent device so that usbcore would trigger a warm reset of the port, thus taking the link out of reset. This has the side-effect of preventing any xHCI host connected to a Linux machine from starting and running the USB 3.0 Electrical Compliance Suite because the port will mysteriously taken out of compliance mode and, thus, xHCI won't step through the necessary compliance patterns for link validation. This patch fixes the issue by just adding a missing check for XHCI_COMP_MODE_QUIRK inside xhci_hub_report_usb3_link_state() when PORT_CAS isn't set. This patch should be backported to all kernels containing commit 71c731a2. Fixes: 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) Cc: Alexis R. Cortes <alexis.cortes@ti.com> Cc: <stable@vger.kernel.org> # v3.2+ Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 Sep, 2014 2 commits
-
-
Piotr Król authored
Fixes: 588b48ca ("usbip: move usbip userspace code out of staging") which introduced build failure by not changing uapi/usbip.h include path according to new location. Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'usb-serial-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.17-rc4 These updates add back some PIDs that were lost in a recent revert and add a couple of new ones. Included is also an update to how the sierra driver binds its interfaces in order to avoid binding CDC interfaces. Signed-off-by: Johan Hovold <johan@kernel.org>
-
- 03 Sep, 2014 14 commits
-
-
Johan Hovold authored
Add back some PIDs that were mistakingly remove when reverting commit 73228a05 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"), which apparently did more than its commit message claimed in that it not only moved some PIDs from option to zte_ev but also added some new ones. Fixes: 63a901c0 ("Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"") Reported-by: Lei Liu <lei35151@163.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.17-rc3 A new set of fixes which have been pending for a while. All patches have been randconfig build-tested and boot tested where applicable. The most important fixes are MUSB on AM335x learned how to transfer ZLPs, and net2280 got a fix for reset IRQ handling. Signed-of-by: Felipe Balbi <balbi@ti.com>
-
Greg Kroah-Hartman authored
Merge tag 'for-3.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: for_3.17-rc Fix regressions to runtime PM on OMAP and other minor fixes.
-
Thierry Reding authored
The PHY configuration is stored in an opaque "config" field, but when allocating the structure, its proper size needs to be known. In the case of UTMI, the proper structure is tegra_utmip_config of which a local variable already exists, so we can use that to obtain the size from. Fixes the following warning from the sparse checker: drivers/usb/phy/phy-tegra-usb.c:882:17: warning: expression using sizeof(void) Fixes: 81d5dfe6 (usb: phy: tegra: Read UTMIP parameters from device tree) Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Peter Chen authored
Add compatible string for imx6sx-usbphy. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Peter Chen authored
Add imx6sx support Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Up to now, when endpoint addresses in descriptors were non-consecutive, there were created redundant files, which could cause problems in kernel, when user tried to read/write to them. It was result of fact that maximum endpoint address was taken as total number of endpoints in function. This patch adds endpoint descriptors counting and storing their addresses in eps_addrmap to verify their cohesion in each speed. Endpoint address map would be also useful for further features, just like vitual endpoint address mapping. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Yoshihiro Shimoda authored
This patch fixes the usb_pkt_pop(). If a gadget driver calls usb_ep_dequeue(), this driver will call the usb_pkt_pop(). So, the usb_pkt_pop() should cancel the transaction. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Yoshihiro Shimoda authored
This patch fixes the condition of is_done in usbhsf_dma_push_done(). This function will be called after a transmission finished by DMAC. So, the function should check if the transmission packet is short packet or not. Also the function should call try_run to send the zero packet by the pio handler if the "*is_done" is not set. Otherwize, the transaction will not finish if a gadget driver sets the "zero" flag in a transmission. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Yoshihiro Shimoda authored
This patch protects the mod->irq_bempsts and mod->irq_brdysts by spin lock in the usbhs_status_get_each_irq() because other functions will write them during spin lock. Otherwise, the driver will clears the BRDYSTS and/or BEMPSTS wrongly, and then, the transaction will not finish. Also since the driver should use the INTSTS0 and BRDYSTS and BEMPSTS as the same timing, the patch protects them. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Yoshihiro Shimoda authored
Some gadget drivers will call usb_ep_queue() more than once before the first queue doesn't finish. However, this driver didn't handle it correctly. So, this patch fixes the behavior of some usbhs_pkt_handle using the "running" flag. Otherwise, the oops below happens if we use g_ncm driver and when the "iperf -u -c host -b 200M" is running. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: usb_f_ncm g_ncm libcomposite u_ether CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-rc1-00008-g8b2be8a-dirty #20 task: c051c7e0 ti: c0512000 task.ti: c0512000 PC is at 0x0 LR is at usbhsf_pkt_handler+0xa8/0x114 pc : [<00000000>] lr : [<c0278fb4>] psr: 60000193 sp : c0513ce8 ip : c0513c58 fp : c0513d24 r10: 00000001 r9 : 00000193 r8 : eebec4a0 r7 : eebec410 r6 : eebe0c6c r5 : 00000000 r4 : ee4a2774 r3 : 00000000 r2 : ee251e00 r1 : c0513cf4 r0 : ee4a2774 Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Rasmus Villemoes authored
Clearly this was meant to be an include guard, but a trailing underscore was missing. It has been this way since the file was introduced in 0fe6f1d1 ("usb: udc: add Faraday fusb300 driver"). Fixes: 0fe6f1d1 ("usb: udc: add Faraday fusb300 driver") Cc: <stable@vger.kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Ricardo Ribalda Delgado authored
Without this patch, some hosts keep restarting indefinitely the target. Fixes: ae8e530a (usb: gadget: net2280: Code Cleanup) Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Bin Liu authored
CPPI TX does not transmit ZLP for TX transfers which - transfer size is multiple of EP packet size, - and URB_ZERO_PACKET is set in urb->transfer_flags. The fix is transmitting the ZLP using PIO mode after the CPPI TX is done. Validated using the following usbtest write case in MUSB host mode. # testusb -t1 -c1 Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
- 01 Sep, 2014 9 commits
-
-
Bjørn Mork authored
This VID:PID is used for some Direct IP devices behaving identical to the already supported 0F3D:68AA devices. Cc: <stable@vger.kernel.org> Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
-
Bjørn Mork authored
Sierra Wireless Direct IP devices using the 68A3 product ID can be configured for modes including a CDC ECM class function. The known example uses interface numbers 12 and 13 for the ECM control and data interfaces respectively, consistent with CDC MBIM function interface numbering on other Sierra devices. It seems cleaner to restrict this driver to the ff/ff/ff vendor specific interfaces rather than increasing the already long interface number blacklist. This should be more future proof if Sierra adds more class functions using interface numbers not yet in the blacklist. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Add device id for NOVITUS Bono E thermal printer. Reported-by: Emanuel Koczwara <poczta@emanuelkoczwara.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Add back some PIDs that were mistakingly remove when reverting commit 73228a05 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"), which apparently did more than its commit message claimed in that it not only moved some PIDs from option to zte_ev but also added some new ones. Fixes: 63a901c0 ("Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"") Reported-by: Lei Liu <lei35151@163.com> Cc: stable <stable@vger.kernel.org>
-
Linus Torvalds authored
-
git://github.com/czankel/xtensa-linuxLinus Torvalds authored
Pull Xtensa updates from Chris Zankel: "Xtensa improvements for 3.17: - support highmem on cores with aliasing data cache. Enable highmem on kc705 by default - simplify addition of new core variants (no need to modify Kconfig / Makefiles) - improve robustness of unaligned access handler and its interaction with window overflow/underflow exception handlers - deprecate atomic and spill registers syscalls - clean up Kconfig: remove orphan MATH_EMULATION, sort 'select' statements - wire up renameat2 syscall. Various fixes: - fix address checks in dma_{alloc,free}_coherent (runtime BUG) - fix access to THREAD_RA/THREAD_SP/THREAD_DS (debug build breakage) - fix TLBTEMP_BASE_2 region handling in fast_second_level_miss (runtime unrecoverable exception) - fix a6 and a7 handling in fast_syscall_xtensa (runtime userspace register clobbering) - fix kernel/user jump out of fast_unaligned (potential runtime unrecoverabl exception) - replace termios IOCTL code definitions with constants (userspace build breakage)" * tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linux: (25 commits) xtensa: deprecate fast_xtensa and fast_spill_registers syscalls xtensa: don't allow overflow/underflow on unaligned stack xtensa: fix a6 and a7 handling in fast_syscall_xtensa xtensa: allow single-stepping through unaligned load/store xtensa: move invalid unaligned instruction handler closer to its users xtensa: make fast_unaligned store restartable xtensa: add double exception fixup handler for fast_unaligned xtensa: fix kernel/user jump out of fast_unaligned xtensa: configure kc705 for highmem xtensa: support highmem in aliasing cache flushing code xtensa: support aliasing cache in kmap xtensa: support aliasing cache in k[un]map_atomic xtensa: implement clear_user_highpage and copy_user_highpage xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss xtensa: allow fixmap and kmap span more than one page table xtensa: make fixmap region addressing grow with index xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS xtensa: add renameat2 syscall xtensa: fix address checks in dma_{alloc,free}_coherent xtensa: replace IOCTL code definitions with constants ...
-
Guenter Roeck authored
unicore32 builds fail with arch/unicore32/kernel/signal.c: In function ‘setup_frame’: arch/unicore32/kernel/signal.c:257: error: ‘usig’ undeclared (first use in this function) arch/unicore32/kernel/signal.c:279: error: ‘usig’ undeclared (first use in this function) arch/unicore32/kernel/signal.c: In function ‘handle_signal’: arch/unicore32/kernel/signal.c:306: warning: unused variable ‘tsk’ arch/unicore32/kernel/signal.c: In function ‘do_signal’: arch/unicore32/kernel/signal.c:376: error: implicit declaration of function ‘get_signsl’ make[1]: *** [arch/unicore32/kernel/signal.o] Error 1 make: *** [arch/unicore32/kernel/signal.o] Error 2 Bisect points to commit 649671c9 ("unicore32: Use get_signal() signal_setup_done()"). This code never even compiled. Reverting the patch does not work, since previously used functions no longer exist, so try to fix it up. Compile tested only. Fixes: 649671c9 ("unicore32: Use get_signal() signal_setup_done()") Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Various assorted fixes: - a couple of patches from Mark Rutland to resolve an errata with Cortex-A15 CPUs. - fix cpuidle for the CPU part ID changes in the last merge window - add support for a relocation which ARM binutils is generating in some circumstances" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8130/1: cpuidle/cpuidle-big_little: fix reading cpu id part number ARM: 8129/1: errata: work around Cortex-A15 erratum 830321 using dummy strex ARM: 8128/1: abort: don't clear the exclusive monitors ARM: 8127/1: module: add support for R_ARM_TARGET1 relocations
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Here's the weekly batch of fixes from arm-soc. The delta is a largeish negative delta, due to revert of SMP support for Broadcom's STB SoC -- it was accidentally merged before some issues had been addressed, so they will make a new attempt for 3.18. I didn't see a need for a full revert of the whole platform due to this, we're keeping the rest enabled. The rest is mostly: - a handful of DT fixes for i.MX (Hummingboard/Cubox-i in particular) - some MTD/NAND fixes for OMAP - minor DT fixes for shmobile - warning fix for UP builds on vexpress/spc There's also a couple of patches that wires up hwmod on TI's DRA7 SoC so it can boot. Drivers and the rest had landed for 3.17, and it's small and isolated so it made sense to pick up now even if it's not a bugfix" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) vexpress/spc: fix a build warning on array bounds ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants MAINTAINERS: catch special Rockchip code locations ARM: dts: microsom-ar8035: MDIO pad must be set open drain ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates ARM: brcmstb: revert SMP support ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled ARM: dts: Enable UART wake-up events for beagleboard ARM: dts: Remove twl6030 clk32g "regulator" ARM: OMAP2+: omap_device: remove warning that clk alias already exists ARM: OMAP: fix %d confusingly prefixed with 0x in format string ARM: dts: DRA7: fix interrupt-cells for GPIO mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc() ARM: dts: omap3430-sdp: Revert to using software ECC for NAND ARM: OMAP2+: GPMC: Support Software ECC scheme via DT mtd: nand: omap: Revert to using software ECC by default ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration ARM: shmobile: r8a7791: add missing 0x0100 for SDCKCR ...
-
- 31 Aug, 2014 7 commits
-
-
Alex Shi authored
With ARCH_VEXPRESS_SPC option, kernel build has the following warning: arch/arm/mach-vexpress/spc.c: In function ‘ve_spc_clk_init’: arch/arm/mach-vexpress/spc.c:431:38: warning: array subscript is below array bounds [-Warray-bounds] struct ve_spc_opp *opps = info->opps[cluster]; ^ since 'cluster' maybe '-1' in UP system. This patch does a active checking to fix this issue. Signed-off-by: Alex Shi <alex.shi@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes Pull "ARM: OMAP2+: DRA72x/DRA74x basic support" from Tony Lindgren: Add basic subarchitecture support for the DRA72x and DRA74x. These are OMAP2+ derivative SoCs. This should be low-risk to existing OMAP platforms. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/hwmod-a-early-v3.17-rc/20140827194314/ * tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi bugfixes from Mark Brown: "A smattering of bug fixes for the SPI subsystem, all in driver code which has seen active work recently and none of them with any great global impact. There's also a new ACPI ID for the pxa2xx driver which required no code changes and the addition of kerneldoc for some structure fields that were missing it and generating warnings during documentation builds as a result" * tag 'spi-v3.17-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sh-msiof: Fix transmit-only DMA transfers spi/rockchip: Avoid accidentally turning off the clock spi: dw: fix kernel crash due to NULL pointer dereference spi: dw-pci: fix bug when regs left uninitialized spi: davinci: fix SPI_NO_CS functionality spi/rockchip: fixup incorrect dma direction setting spi/pxa2xx: Add ACPI ID for Intel Braswell spi: spi-au1550: fix build failure spi: rspi: Fix leaking of unused DMA descriptors spi: sh-msiof: Fix leaking of unused DMA descriptors spi: Add missing kerneldoc bits spi/omap-mcspi: Fix the spi task hangs waiting dma_rx
-
Mark Brown authored
-
Mark Brown authored
spi: Bug fixes for v3.17 A smattering of bug fixes for the SPI subsystem, all in driver code which has seen active work recently and none of them with any great global impact. There's also a new ACPI ID for the pxa2xx driver which required no code changes and the addition of kerneldoc for some structure fields that were missing it and generating warnings during documentation builds as a result. # gpg: Signature made Sun 31 Aug 2014 13:19:12 BST using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
Geert Uytterhoeven authored
Fix tx/rx mixup, which broke transmit-only transfers. Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839 ("spi: sh-msiof: Fix leaking of unused DMA descriptors"). Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking bugfx from Jeff Layton: "Just a bugfix for a bug that crept in to v3.15. It's in a rather rare error path, and I'm not aware of anyone having hit it, but it's worth fixing for v3.17" * tag 'locks-v3.17-3' of git://git.samba.org/jlayton/linux: locks: pass correct "before" pointer to locks_unlink_lock in generic_add_lease
-
- 30 Aug, 2014 1 commit
-
-
Mark Brown authored
Merge remote-tracking branches 'spi/fix/au1550', 'spi/fix/davinci', 'spi/fix/doc', 'spi/fix/dw', 'spi/fix/omap-mcspi', 'spi/fix/pxa2xx', 'spi/fix/rockchip' and 'spi/fix/rspi' into spi-linus
-