- 29 Dec, 2008 40 commits
-
-
Christof Schmitt authored
Use an array for looking up the mask corresponding to the 2-bit information instead of the switch/case. Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by:
Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Christof Schmitt authored
The information from the kernel parameter is only needed during init. Keep the three pieces (busid, wwpn and lun) local to simplify the global zfcp_data structures. While at it, also remove the unused loglevel variable and give the module parameter variable a better name. Signed-off-by:
-
Heiko Carstens authored
Get rid of this one: drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_thread': drivers/s390/scsi/zfcp_erp.c:1400: warning: ignoring return value of 'down_interruptible', declared with attribute warn_unused_result zfcp_erp_thread is a kernel thread which can't receive any signals. So introduce a dummy variable and get rid of the warning. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
After the latest changes, the list of FCP devices is only used to lookup the adapter for requests from the actcli tool. Change this to use the lookup function in the cio layer. Now we can remove the adapter list and have one place less to use the global config_lock. Signed-off-by:
-
Christof Schmitt authored
When waiting for a request claim the SBAL before waiting. This way, locking before each check of the free counter is not required and sparse does not emit warnings for the complicated locking scheme. Signed-off-by:
-
Swen Schillig authored
Synchronize the registration and de-registration with the SCSI layer at CCW registration, de-registration. Before we registered with the SCSI layer on adapter activation. This way the reg and de-reg process is in balance. Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Move the closing parenthesis before the line break. Signed-off-by:
-
Anirban Chakraborty authored
Following changes have been made: 1. Scan outstanding commands only in the queue where it is submitted 2. Update queue registers directly in the fast path 3. Queue specific BAR is remapped only for multiq capable adapters Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
-
FUJITA Tomonori authored
This fixes the regression introduced by the commit 58e2a02e (eata: convert to use the data buffer accessors), reported: http://marc.info/?t=122987621300006&r=1&w=2 - fix DMA_NONE handling in map_dma() - this driver can't use scsi_dma_map since host->shost_gendev.parent is not set properly (it uses scsi_register). Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reported-by:
Arthur Marsh <arthur.marsh@internode.on.net> Tested-by:
-
Brian King authored
While doing various error injection testing, such as cable pulls and target moves, some issues were observed in handling these events. This patch improves the way these events are handled by increasing the delay waiting for the fabric to settle and also changes the behavior of Link Up to break the CRQ to ensure everything gets cleaned up properly on the VIOS. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
Mark Nelson authored
To fix the following lockdep warning we turn the spin_unlock_irq() into a spin_unlock() and similarly for the corresponding spin_lock_irq(). We can do this because there is no need to enable interrupts in this path (thanks to Bring King for the tip). Badness at kernel/lockdep.c:2193 NIP: c0000000000855d0 LR: c0000000000855b4 CTR: c0000000000482d0 REGS: c00000000fffb8d0 TRAP: 0700 Not tainted (2.6.28-rc5-autokern1) MSR: 8000000000021032 <ME,IR,DR> CR: 28000022 XER: 00000004 TASK = c00000000091fa80[0] 'swapper' THREAD: c000000000a3c000 CPU: 0 GPR00: 0000000000000000 c00000000fffbb50 c000000000a3c2e0 0000000000000001 GPR04: 000000000000a580 c0000000003870d4 0000000000000000 0000000000000001 GPR08: 0000000000000000 c00000000112fdf0 c0000000008ed918 c000000000abcfd0 GPR12: 0000000048000088 c000000000a7f300 0000000000000000 0000000002100000 GPR16: c000000000644bd0 c000000000643390 0000000000000000 00000000003d0c00 GPR20: 00000000028372d8 c0000000007372d8 0000000002837548 c000000000737548 GPR24: c000000000644660 00000000028372d8 000000000000001a c000000076760000 GPR28: 0000000000000004 c0000000004e8450 c0000000009aafb0 c00000000091fa80 NIP [c0000000000855d0] .trace_hardirqs_on_caller+0x10c/0x194 LR [c0000000000855b4] .trace_hardirqs_on_caller+0xf0/0x194 Call Trace: [c00000000fffbb50] [c00000000fffbbe0] 0xc00000000fffbbe0 (unreliable) [c00000000fffbbe0] [c0000000004e8450] ._spin_unlock_irq+0x38/0x5c [c00000000fffbc70] [c0000000003870d4] .ipr_ioa_reset_done+0x204/0x284 [c00000000fffbd10] [c00000000037d234] .ipr_reset_ioa_job+0xc4/0xec [c00000000fffbda0] [c000000000385ce0] .ipr_isr+0x208/0x484 [c00000000fffbe50] [c0000000000aaf3c] .handle_IRQ_event+0x58/0xd4 [c00000000fffbef0] [c0000000000ad978] .handle_fasteoi_irq+0x110/0x1ac [c00000000fffbf90] [c000000000025214] .call_handle_irq+0x1c/0x2c [c000000000a3f9a0] [c00000000000d168] .do_IRQ+0x120/0x210 [c000000000a3fa40] [c000000000004804] hardware_interrupt_entry+0x1c/0x98 --- Exception: 501 at .pseries_dedicated_idle_sleep+0xec/0x1cc LR = .pseries_dedicated_idle_sleep+0xdc/0x1cc [c000000000a3fd30] [c000000000038208] .pseries_dedicated_idle_sleep+0x74/0x1cc (unreliable) [c000000000a3fdd0] [c000000000012134] .cpu_idle+0x114/0x1dc [c000000000a3fe60] [c0000000004ecb18] .rest_init+0x7c/0x94 [c000000000a3fee0] [c000000000700a40] .start_kernel+0x4b8/0x4e0 [c000000000a3ff90] [c000000000008368] .start_here_common+0x1c/0x34 Instruction dump: e92d01b0 80090894 2f800000 41be002c 481ed1d1 60000000 2fa30000 419e0080 e93e8090 80090000 2f800000 409e0070 <0fe00000> 48000068 7fe3fb78 38800001 Signed-off-by:Mark Nelson <markn@au1.ibm.com> Acked-by:
-
James Smart authored
Pre-emptively terminate i/o on the rport if dev_loss_tmo has fired. The desire is to terminate everything, so that the i/o is cleaned up prior to the sdev's being unblocked, thus any outstanding timeouts/aborts are avoided. Also, we do this early enough such that the rport's port_id field is still valid. FCOE libFC code needs this info to find the i/o's to terminate. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Anirban Chakraborty authored
Following changes have been made. 1. qla_hw_data structure holds an array for request queue pointers, and an array for response queue pointers. 2. The base request and response queues are created by default. 3. Additional request and response queues are created at the time of vport creation. If queue resources are exhausted during vport creation, newly created vports use the default queue. 4. Requests are sent to the request queue that the vport was assigned in the beginning. 5. Responses are completed on the response queue with which the request queue is associated with. [fixup memcpy argument reversal spotted by davej@redhat.com] Signed-off-by:
-
Robert Love authored
Encapsulation protocol for running Fibre Channel over Ethernet interfaces. Creates virtual Fibre Channel host adapters using libfc. This layer is the LLD to the scsi-ml. It allocates the Scsi_Host, utilizes libfc for Fibre Channel protocol processing and interacts with netdev to send/receive Ethernet packets. Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Robert Love authored
libFC is composed of 4 blocks supported by an exchange manager and a framing library. The upper 4 layers are fc_lport, fc_disc, fc_rport and fc_fcp. A LLD that uses libfc could choose to either use libfc's block, or using the transport template defined in libfc.h, override one or more blocks with its own implementation. The EM (Exchange Manager) manages exhcanges/sequences for all commands- ELS, CT and FCP. The framing library frames ELS and CT commands. The fc_lport block manages the library's representation of the host's FC enabled ports. The fc_disc block manages discovery of targets as well as handling changes that occur in the FC fabric (via. RSCN events). The fc_rport block manages the library's representation of other entities in the FC fabric. Currently the library uses this block for targets, its peer when in point-to-point mode and the directory server, but can be extended for other entities if needed. The fc_fcp block interacts with the scsi-ml and handles all I/O. Signed-off-by:
-
Robert Love authored
Signed-off-by:
-
Brian King authored
The ibmvscsi driver currently has a bug in it which can result in it using up all its event structs for commands. If something results in all those commands timing out, we won't have any resources left to send aborts or resets. This results in escalating to a host reset in order to recover, which is a bit heavy handed. This fixes it by reducing can_queue by two in order to have resources to do EH. It also changes the max_requests module parameter so that it is not writable at runtime, since the code really does not handle it changing at runtime. Signed-off-by:
-
FUJITA Tomonori authored
[jejb: fix rejections] Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in st_int_ioctl with st_scsi_kern_execute. Signed-off-by:
Kai Makisara <Kai.Makisara@kolumbus.fi> Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in get_location (READ_POSITION) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in write_mode_page (MODE_SELECT) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in read_mode_page (MODE_SENSE) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in check_tape (READ_BLOCK_LIMITS and MODE_SENSE) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in st_flush (WRITE FILEMARKS) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in cross_eof (SPACE) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in do_load_unload (START STOP) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in set_location (LOCATE 10) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
This replaces st_do_scsi in test_ready (TEST_UNIT_READY) with st_scsi_kern_execute. Signed-off-by:
-
FUJITA Tomonori authored
st_scsi_kern_execute is a helper function to perform SCSI commands synchronously. It supports data transfer with a liner in-kernel buffer (not scatter gather). st_scsi_kern_execute internally uses scsi_execute(). The majority of st_do_scsi can be replaced with st_scsi_kern_execute. This is a preparation for rewriting st_do_scsi to remove obsolete scsi_execute_async(). Signed-off-by:
-
FUJITA Tomonori authored
This moves st_request initialization code to st_allocate_request() form st_do_scsi(). This is a preparation for making st_allocate_request() usable for everyone, not only st_do_scsi(). Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Add SCSI data path, error handling, and debugfs code to complete BlockGuard support. Signed-off-by:
-
James Smart authored
Update struct definitions, #defines, sysfs entries, and initialization to support BlockGuard. Signed-off-by:
-
James Smart authored
- Fix mailbox buffer leak on dump mailbox completion - Fix mbuf leak in lpfc_pci_probe_one() SLI-2 mode error path - Don't allocate HBQs in interrupt context - Use correct size for FCP response buffer so that all available sense data is copied - Fix jiffies calculation to prevent crash when collecting statistical data Signed-off-by:
-
James Smart authored
Per the recent discussions at the Linux Plumbers Conference, when enabling MSI or MSI-X, generate a test interrupt to verify the interrupt routing is working properly. If the test interrupt fails, fall back to MSI first, and if that fails as well, to INTx. If the interrupt test fails with INTx, log an error and fail the PCI probe. Also changed the use of spin_(lock|unlock) to the _irq(save|restore) variants in the interrupt handlers because with multi-message MSI-X, both interrupt handlers can now run in parallel. Signed-off-by:
-
James Smart authored
- Avoid polling HBA Error Attention when HBA's PCI channel is offline due to PCI EEH - Fix handling of RSCN with non-zero event qualifiers - Remove unnecessary sleeps during HBA initialization which slow down driver load - Fix internal and external loopback on FCoE HBAs - Fix incorrect decrement of cmd_pending count in lpfc_queuecomand error path - Fix reporting of port busy events to management application - Rename lpfc_adjust_queue_depth() to lpfc_rampdown_queue_depth() for consistency with its partner lpfc_rampup_queue_depth() - Delete redundant lpfc_cmd->start_time = jiffies assignment in lpfc_queuecommand() - Fix handling for ELS, mailbox and heartbeat time outs in the worker thread by removing unnecessary checking of the work_port_events flags. - Fix NULL pointer dereference in lpfc_prep_els_iocb - In lpfc_device_recov_npr_node(), move clearing of NLP_NPR_2B_DISC flag after call to lpfc_cancel_retry_delay_tmo() to keep targets-in-discovery count correct - Remove lpfc_probe_one()'s call to scsi_scan_host() which could cause concurrent SCSI scans to step on each other Signed-off-by:
-
James Smart authored
The phba hbq_get address was setup before the HBA reported support for Interrupt Enable Block (INB). This caused loopback tests to fail after all HBQs had been used once. Moved setting of hba_get until after config port mailbox command completes. Signed-off-by:
-
James Smart authored
- Added FC_REG_VPORTRSCN_EVENT to lpfc_nl.h - Added code to provide option ROM version from HBA and via sysfs - Added support for HPS bit in config port mailbox command to tell HBA that host group pointers are in host memory. - Bugfix for Extended Error Handling (EEH) support on IBM PowerPC P6 platform with MSI enabled Signed-off-by:
-
