This patch replace memcpy with ethe_addr_copy to address the following
warning generated by checkpatch.pl: ""Prefer ether_addr_copy over memcpy
if the Ethernet addresses are __aligned(2)"

Follwoing is the output of pahole for the relevant datastructures:
1- for  "iwe.u.ap_addr.sa_data" and "wrqu->ap_addr.sa_data"

struct sockaddr {
        sa_family_t                sa_family;            /*     0     2 */
        char                       sa_data[14];          /*     2    14 */

        /* size: 16, cachelines: 1, members: 2 */
        /* last cacheline: 16 bytes */
};

struct iw_event {
        __u16                      len;                  /*     0     2 */
        __u16                      cmd;                  /*     2     2 */

        /* XXX 4 bytes hole, try to pack */

        union iwreq_data           u;                    /*     8    16 */

        /* size: 24, cachelines: 1, members: 3 */
        /* sum members: 20, holes: 1, sum holes: 4 */
        /* last cacheline: 24 bytes */
};

2- for  "pnetwork->network.MacAddress" and "pcur_bss->MacAddress"

struct wlan_network {
        struct list_head           list;                 /*     0    16 */
        int                        network_type;         /*    16     4 */
        int                        fixed;                /*    20     4 */
        unsigned int               last_scanned;         /*    24     4 */
        int                        aid;                  /*    28     4 */
        int                        join_res;             /*    32     4 */
        struct ndis_wlan_bssid_ex  network;              /*    36   884 */
        /* --- cacheline 14 boundary (896 bytes) was 24 bytes ago ---   */

        /* size: 920, cachelines: 15, members: 7 */
        /* last cacheline: 24 bytes */
};

struct ndis_wlan_bssid_ex {
        u32                        Length;               /*     0     4 */
        unsigned char              MacAddress[6];        /*     4     6 */
        u8                         Reserved[2];          /*    10     2 */
        struct ndis_802_11_ssid    Ssid;                 /*    12    36 */
        u32                        Privacy;              /*    48     4 */
        s32                        Rssi;                 /*    52     4 */
        enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;  /*    56     4 */
        struct NDIS_802_11_CONFIGURATION Configuration;  /*    60    32 */
        /* --- cacheline 1 boundary (64 bytes) was 28 bytes ago --- */
        enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; /* 92     4 */
        NDIS_802_11_RATES_EX       SupportedRates;       /*    96    16 */
        u32                        IELength;             /*   112     4 */
        u8                         IEs[768];             /*   116   768 */
        /* --- cacheline 13 boundary (832 bytes) was 52 bytes ago --- */

        /* size: 884, cachelines: 14, members: 12 */
        /* last cacheline: 52 bytes */
};
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch converts code to use %pM specifier instead of placing each
byte on stack.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When we removed the ERRDEV() macro we made a small mistake so now it
doesn't print the "Virtual PCI devices" section header.

Fixes: 0aca7844 ('staging: unisys: remove ERRDEV macros')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes "braces {} are not necessary for single statement blocks" in uislib.
Signed-off-by: Michel von Czettritz <michel.von.czettritz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
	S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dev_* is prefered over pr_* when appropriate dev structure is present.
This patch replace pr_info and pr_warn with its dev_ counterpart.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch.pl suggest to avoid assignment in if statement.

This patch moves assignments out of the if statement and place
it before the if statement. This is done using following coccinelle
script.

@@
expression E1;
identifier p;
statement S;
@@
- if ((p = E1))
+ p = E1;
+ if (p)
	S
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These print functions are called at the beginning
of the function and do not indicate any abnormal condition.
Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes macro true from if condition since variable
priv->ieee80211->LinkDetectInfo.bBusyTraffic is already of type bool.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Macro module_pci_driver is used for drivers whose init
and exit paths does only register and unregister to pci
API. So, here remove some boilerplate code by using
module_pci_driver. Also, change driver to rtsx_driver,
to avoid implicitly redefining driver_init.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Macro module_pcmcia_driver is used for drivers whose init
and exit paths does only register and unregister to pcmcia
API. So, here remove some boilerplate code by using
module_pcmcia_driver.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.

Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL

changes made using coccinelle script:
@@
type T;
identifier var;
@@
static T var
- =0
;
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.

Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL

changes made using coccinelle script:
@@
type T;
identifier var;
@@
static T var
- =0
;
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function setup_timer combines the initialization of a timer with the
initialization of the timer's function and data fields.

So, this patch combines the multiline code for timer initialization using the function
setup_timer. This issue is identified via coccinelle script.

@@
expression E1, E2, E3;
type T;
@@
- init_timer(&E1);
...
(
- E1.function = E2;
...
- E1.data = (T)E3;
+ setup_timer(&E1, E2, (T)E3);
|
- E1.data = (T)E3;
...
- E1.function = E2;
+ setup_timer(&E1, E2, (T)E3);
|
- E1.function = E2;
+ setup_timer(&E1, E2, 0);
)
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add braces to improve consistency when using if statements.
Found by checkpatch.pl:
"CHECK: braces {} should be used on all arms of this statement".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch arranges multiple-line parameters in accordance with
the parameter above them to improve coding style.
Found by checkpatch.pl
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes unnecessary blank lines between functions.
Found by checkpatch.pl:
"CHECK: Please don't use multiple blank lines".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces bit shifting on 1 with the BIT(x) macro
as it's extensively used by other function in this driver.

This was done with coccinelle:
@@ int g; @@

-(1 << g)
+BIT(g)
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch simplifies pointer comparison to NULL and makes code
easier to read. Warning found by checkpatch.pl.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes unnecessary space after type casts.
Warning found by checkpatch.pl.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the conditional return of the ade77*_probe functions
based on the return values of iio_device_register as the latter
returns 0 or ret, the same as the checked values.

Warning found by coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl warning:

WARNING: braces {} are not necessary for single
statement blocks
Signed-off-by: Taiane Coelho Ramos <exhora.tat@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove "break" statement after a "return" statement as
it does not get executed.

Found by checkpatch.pl - break is not useful after a goto
or return
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.

Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL

changes made using coccinelle script:
@@
type T;
identifier var;
@@
static T var
- =0
;
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch introduces the use of API function setup_timer
instead of driver specific function init_timer as it is
the preferred and standard way to set and setup the timer.
To be compatible with the changes, argument types of
referenced functions are changed. Also, definition of
function _init_timer is removed as it is no longer needed
after this change.

Here, these cases are handled using Coccinelle and
semantic patch used for this is as follows:

@@ expression x, y; identifier a, b;@@

- _init_timer (&x, y, a, b);
+ setup_timer (&x, a, (unsigned long)b);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch introduces the use of API function mod_timer
instead of driver specific function _set_timer as it is
a more efficient and standard way to update the expire
field of an active timer. Also, definition of function
_set_timer is removed as it is no longer needed after
this change.

Here, these cases are handled using Coccinelle and
semantic patch used for this is as follows:

@@ expression x; expression y;@@

- _set_timer (&x, y);
+ mod_timer (&x, jiffies + msecs_to_jiffies (y));
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl warning:

WARNING: 'halfs' may be misspelled - perhaps 'halves'?
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch converts code to use %pM specifier instead of pushing
each byte via stack.
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>