1. 19 Apr, 2017 7 commits
  2. 05 Apr, 2017 6 commits
  3. 04 Apr, 2017 6 commits
  4. 03 Apr, 2017 5 commits
  5. 31 Mar, 2017 9 commits
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-4.11/devicetree-fixes' of http://github.com/Broadcom/stblinux into fixes · 3f5099f0
      Arnd Bergmann authored
      There was a little conflict between the v4.11 bugfixes and the new changes for 4.12,
      this merges the fixes into the 4.12 branch to avoid having to resolve it again.
      
      * Broadcom fixes in mainline
        ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
        ARM: dts: BCM5301X: Fix memory start address
        ARM: dts: BCM5301X: Fix UARTs on bcm953012k
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      3f5099f0
    • Arnd Bergmann's avatar
      Merge tag 'omap-for-v4.12/dt-v2-signed' of... · 944d01c5
      Arnd Bergmann authored
      Merge tag 'omap-for-v4.12/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
      
      Pull "Devicetree changes for omaps for v4.12 merge window" from Tony Lindgren:
      
      - Add hecc node for am35x
      
      - Add onenand support for omap3-igep
      
      - Add bluetooth binding for n900/n9/n950
      
      - Configure clocks and SATA for dm81xx
      
      - Update operating points tables for am33xx, am43xx and dra7
      
      - Update SPI flash documentation for w25q64
      
      - Configure SPI NOR for am335x-icev2
      
      - Mux uart0 for am437x-gp-evm
      
      - Add thermal zones for omap3, omap4, omap5, dra7
      
      - Configure LEDs for am335x-baltos
      
      - A series of droid 4 changes to configure various devices
        such as keypad, regulators, gpio-keys, rtc, power button,
        compass, accelerometer, touchscreen, backlight, poweroff,
        tmp105, HDMI, LCD panel and LEDs, EHCI, and micro-SD
      
      * tag 'omap-for-v4.12/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits)
        ARM: dts: am335x-baltos: add LED support
        ARM: dts: omap4-droid4: Fix MMC1 card for detect GPIO and regulator
        ARM: dts: OMAP4460: Thermal: Add slope and offset values
        ARM: dts: OMAP443x: Thermal: Add slope and offset values
        ARM: dts: OMAP5: Thermal: Add slope and offset values
        ARM: dts: DRA7: Thermal: Add slope and offset values
        ARM: dts: omap3: Add cpu_thermal zone
        ARM: dts: am437x-gp-evm: Add pinmux for uart0
        ARM: dts: am335x-icev2: Add SPI based NOR
        Documentation: devicetree: mtd: add w25q64 to list of supported SPI flashes
        ARM: dts: dra7: Add updated operating-points-v2 table for cpu
        ARM: dts: am4372: Update operating-points-v2 table for cpu
        ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu
        ARM: dts: am33xx: Add updated operating-points-v2 table for cpu
        ARM: dts: dm8168-evm: add SATA node
        ARM: dts: dm8168-evm: add the external reference clock for SATA
        ARM: dts: N9/N950: add bluetooth
        ARM: dts: N900: Add bluetooth
        ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
        ARM: dts: motorola-cpcap-mapphone: add LEDs
        ...
      944d01c5
    • Arnd Bergmann's avatar
      Merge tag 'v4.12-rockchip-dts32-1' of... · 5ea67992
      Arnd Bergmann authored
      Merge tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
      
      Pull "Rockchip dts32 updates for 4.12 part1" from Heiko Stübner:
      
      Contains one new board, the Tinkerboard from Asus based on the rk3288,
      definitions for the mmc resets in the socs reset controller, sound
      support for the Rock2, dma support for mmc controllers on the rk3188
      and a led-fix for the MiQi board and and irq-fix for older Cortex-A9 socs.
      
      * tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
        ARM: dts: rockchip: setup DMA-channels for mmc0 and emmc for rk3188
        ARM: dts: rockchip: fix PPI misconfiguration on Cortex-A9 socs
        ARM: dts: rockchip: add rk322x dw-mmc resets
        ARM: dts: rockchip: add rk3066/rk3188 dw-mmc resets
        ARM: dts: rockchip: add rk3036 dw-mmc resets
        ARM: dts: rockchip: add rk3288 dw-mmc resets
        ARM: dts: rockchip: add dts for RK3288-Tinker board
        dt-bindings: add rk3288-based Asus Tinker board
        ARM: dts: rockchip: fix the MiQi board's LED definition
        ARM: dts: rockchip: Add support for ES8388 to the Radxa Rock 2
      5ea67992
    • Arnd Bergmann's avatar
      Merge tag 'gemini-dts-2' of... · f63c00bc
      Arnd Bergmann authored
      Merge tag 'gemini-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
      
      Pull "DTS updates for the Gemini on top of the multiplatform base" from Linus Walleij:
      
      - Add the power controller to the DTS.
      - Augment the GPIO nodes to also include the Faraday
        compatible.
      - Add the PCI bus host and config to the Gemini device trees.
      
      * tag 'gemini-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
        ARM: dts: add PCI to the Gemini device trees
        ARM: dts: augment Gemini GPIO nodes
        ARM: dts: add power controller to the Gemini DTS
      f63c00bc
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux into next/dt · 1b188329
      Arnd Bergmann authored
      Pull "Broadcom devicetree changes for 4.12" from Florian Fainelli:
      
      This pull request contains Broadcom ARM-based SoCs Device Tree updates for
      4.12, please pull the following:
      
      - Rafal:
      
      	* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
      	  EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
      	  a bunch of BCM43602 radios.
      
      	* updates the BCM5301X DTS and DTS include file and moves the serial
      	  console parameters to the DTS include file since all BCM5301X that we have so
      	  far are consistent in using the same UART. He also does the same for the
      	  BCM53573 DTS.
      
      	* makes some updates to the Tenda AC9 platform by describing its
      	  PCIe controllers and endpoints in order to be able to represent GPIOs attached
      	  to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
      	  to one of these GPIOs.
      
      	* re-licenses the DTS files he created to the ISC license
      
      	* removes the use of the non-existend "default-off" LED trigger in the
      	  BCM53573 and BCM5301X DTS files
      
      - Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness
      
      - Jon:
      	* adds NAND controller Device Tree nodes to the BCM953012K reference board
      
        	* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
        	  Device Tree nodes.
      
      	* fixes the GIC PPI interrupt flags that the kernel now
        	  reports about.
      
      	* adds ARM TWD watchdog entries to the BCM5301X DTS include file
        	* adds I2C entries to the BCM5301X DTS include files.
      
      	* disables i2c by default in the Northstar Plus DTS include file, and
      	 ,enables it at the board level instead.
      
      	* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
      	  include files.
      
      - Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
        Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
        aliases to the BCM53012HR board since some bootloaders require that for MAC address
        patching.
      
      - Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
        but leaves them disabled by default (overlays should take care of enabling it)
      
      - Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs
      
      - Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs
      
      - Rob fixes the iProc msi-controller name and unit address now that DTC can produce
        additional errors
      
      * tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux: (27 commits)
        ARM: dts: bcm: fix msi-controller name and unit address
        ARM: dts: BCM53573: Specify serial console parameters
        ARM: dts: BCM5301X: Specify serial console params in dtsi files
        ARM: dts: NSP: Add crypto (SPU) to dtsi
        ARM: dts: NSP: Add mailbox (PDC) to NSP
        ARM: dts: BCM953012HR: Add ethernet aliases
        ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
        ARM: dts: NSP: disable i2c DT entry by default
        ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
        ARM: dts: BCM5301X: Add I2C support to the DT
        ARM: dts: BCM5301X: Add TWD WD Support to DT
        ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
        ARM: dts: bcm2835: add sdhost controller to devicetree
        ARM: dts: bcm283x: Add HDMI audio related properties
        ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger
        ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger
        ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
        ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
        ARM: dts: bcm2835: Add the DSI module nodes and clocks.
        ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
        ...
      1b188329
    • Arnd Bergmann's avatar
      Merge tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu into next/dt · b916a609
      Arnd Bergmann authored
      Pull "mvebu dt for 4.12 (part 1)" from Gregory CLEMENT:
      
      - Add node lable for Armada 38x
      - Add support for Synology DS116 NAS and Linksys WRT1900ACS
      - Update mbus controller description on Armada 38x allowing entering in standby
      - Add default trigger for sata led on various linksys boards
      - Update newly added armada-xp-98dx3236
      - Enable hardware buffer manager support for the devices in the
        Linksys WRT AC Serie
      
      * tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu:
        ARM: dts: mvebu: linksys: enable buffer manager support
        ARM: dts: mvebu: remove unnecessary PCI range from 98dx3236
        ARM: dts: mvebu: Move mv98dx3236 clock bindings
        ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236
        ARM: dts: armada-xp-98dx3236: combine dfx server nodes
        ARM: dts: armada: Add default trigger for sata led
        ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x
        ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)
        ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS
        ARM: dts: armada-38x add node labels
      b916a609
    • Arnd Bergmann's avatar
      Merge tag 'davinci-for-v4.12/dt' of... · 2c5ad976
      Arnd Bergmann authored
      Merge tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
      
      Pull "DaVinci DT updates for v4.12" from Sekhar Nori:
      
      DaVinci device tree updates to enable
      Video display on DA850 along with some
      whitespace clean-up.
      
      Also, enables sound and ADC support on
      Lego EV3.
      
      * tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
        ARM: dts: da850-evm: add the output port to the vpif node
        ARM: dts: da850-evm: add IO expander node on UI card
        ARM: dts: da850: add vpif video display pins
        ARM: dts: da850-evm: fix whitespace errors
        ARM: da850-lego-ev3: Add device tree node for sound
        ARM: da850-lego-ev3: Add device tree node for A/DC
      2c5ad976
    • Linus Walleij's avatar
      ARM: dts: augment Moxa ART GPIO node · 0409d756
      Linus Walleij authored
      The Moxa ART GPIO is a Faraday FTGPIO010. Augment the DTS node
      to indicate both compatible values for the SoC and the IP part.
      Also increase the register range to 0x100, it has at least 0x48
      bytes of registers, and a few extra will not hurt.
      Tested-by: default avatarJonas Jensen <jonas.jensen@gmail.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      0409d756
    • Arnd Bergmann's avatar
      Merge tag 'uniphier-dt-v4.12' of... · c83e93e6
      Arnd Bergmann authored
      Merge tag 'uniphier-dt-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
      
      Pull "UniPhier ARM SoC DT updates for v4.12" from Masahiro Yamada:
      
      - Remove skeleton.dtsi inclusion
      - Fix W=* build warnings
      - Fix eMMC pin-mux node
      - Add pagesize properties to EEPROM nodes
      
      * tag 'uniphier-dt-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
        ARM: dts: uniphier: add pagesize property to EEPROM of proto boards
        ARM: dts: uniphier: add pagesize property to EEPROM of Support Card
        ARM: dts: uniphier: fix pin groups of eMMC pin-mux node
        ARM: dts: uniphier: move memory node below aliases node
        ARM: dts: uniphier: fix no unit name warnings
        ARM: dts: uniphier: remove skeleton.dtsi inclusion
      c83e93e6
  6. 30 Mar, 2017 1 commit
  7. 29 Mar, 2017 3 commits
  8. 28 Mar, 2017 3 commits