- 14 Aug, 2020 15 commits
-
-
Kevin Wang authored
when function arcturus_get_smu_metrics_data() call failed, it will cause the variable "throttler_status" isn't initialized before use. warning: powerplay/arcturus_ppt.c:2268:24: warning: ‘throttler_status’ may be used uninitialized in this function [-Wmaybe-uninitialized] 2268 | if (throttler_status & logging_label[throttler_idx].feature_mask) { Signed-off-by:Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jiansong Chen authored
gfxoff is temporarily disabled for navy_flounder, since at present the feature has broken some basic amdgpu test. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Evan Quan authored
To fit the latest SMU firmware. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Evan Quan authored
Instead of having one copy in each ASIC. Signed-off-by:
-
Evan Quan authored
To make the setting same as Arcturus/Navi1x/Sienna_Cichlid. Signed-off-by:
-
Oak Zeng authored
Add more function pointers to amdgpu_mmhub_funcs. ASIC specific implementation of most mmhub functions are called from a general function pointer, instead of calling different function for different ASIC. Simplify the code by deleting duplicate functions Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
-
Nirmoy Das authored
Fixes: c030f2e4 ("drm/amdgpu: add amdgpu_ras.c to support ras (v2)") Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Dennis Li authored
[ 584.110304] ============================================ [ 584.110590] WARNING: possible recursive locking detected [ 584.110876] 5.6.0-deli-v5.6-2848-g3f3109b0e75f #1 Tainted: G OE [ 584.111164] -------------------------------------------- [ 584.111456] kworker/38:1/553 is trying to acquire lock: [ 584.111721] ffff9b15ff0a47a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.112112] but task is already holding lock: [ 584.112673] ffff9b1603d247a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.113068] other info that might help us debug this: [ 584.113689] Possible unsafe locking scenario: [ 584.114350] CPU0 [ 584.114685] ---- [ 584.115014] lock(&adev->reset_sem); [ 584.115349] lock(&adev->reset_sem); [ 584.115678] *** DEADLOCK *** [ 584.116624] May be due to missing lock nesting notation [ 584.117284] 4 locks held by kworker/38:1/553: [ 584.117616] #0: ffff9ad635c1d348 ((wq_completion)events){+.+.}, at: process_one_work+0x21f/0x630 [ 584.117967] #1: ffffac708e1c3e58 ((work_completion)(&con->recovery_work)){+.+.}, at: process_one_work+0x21f/0x630 [ 584.118358] #2: ffffffffc1c2a5d0 (&tmp->hive_lock){+.+.}, at: amdgpu_device_gpu_recover+0xae/0x1030 [amdgpu] [ 584.118786] #3: ffff9b1603d247a0 (&adev->reset_sem){++++}, at: amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.119222] stack backtrace: [ 584.119990] CPU: 38 PID: 553 Comm: kworker/38:1 Kdump: loaded Tainted: G OE 5.6.0-deli-v5.6-2848-g3f3109b0e75f #1 [ 584.120782] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019 [ 584.121223] Workqueue: events amdgpu_ras_do_recovery [amdgpu] [ 584.121638] Call Trace: [ 584.122050] dump_stack+0x98/0xd5 [ 584.122499] __lock_acquire+0x1139/0x16e0 [ 584.122931] ? trace_hardirqs_on+0x3b/0xf0 [ 584.123358] ? cancel_delayed_work+0xa6/0xc0 [ 584.123771] lock_acquire+0xb8/0x1c0 [ 584.124197] ? amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.124599] down_write+0x49/0x120 [ 584.125032] ? amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.125472] amdgpu_device_gpu_recover+0x262/0x1030 [amdgpu] [ 584.125910] ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu] [ 584.126367] amdgpu_ras_do_recovery+0x159/0x190 [amdgpu] [ 584.126789] process_one_work+0x29e/0x630 [ 584.127208] worker_thread+0x3c/0x3f0 [ 584.127621] ? __kthread_parkme+0x61/0x90 [ 584.128014] kthread+0x12f/0x150 [ 584.128402] ? process_one_work+0x630/0x630 [ 584.128790] ? kthread_park+0x90/0x90 [ 584.129174] ret_from_fork+0x3a/0x50 Each adev has owned lock_class_key to avoid false positive recursive locking. v2: 1. register adev->lock_key into lockdep, otherwise lockdep will report the below warning [ 1216.705820] BUG: key ffff890183b647d0 has not been registered! [ 1216.705924] ------------[ cut here ]------------ [ 1216.705972] DEBUG_LOCKS_WARN_ON(1) [ 1216.705997] WARNING: CPU: 20 PID: 541 at kernel/locking/lockdep.c:3743 lockdep_init_map+0x150/0x210 v3: change to use down_write_nest_lock to annotate the false dead-lock warning. Reviewed-by:Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
-
Wenhui Sheng authored
After amdgpu driver loading successfully, we can use RAP debugfs interface <debugfs_dir>/dri/xxx/rap_test to trigger RAP test. Currently only L0 validate test is supported. v2: refine amdgpu_rap.h Signed-off-by:
Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Wenhui Sheng authored
Enable the RAP TA loading path and add RAP test trigger interface. v2: fix potential mem leak issue Signed-off-by:
-
Wenhui Sheng authored
The RAP TA contains tests used to verify if RAP(Register Access Policy), or otherwise known as Security Policy is applied correctly by PSP BL&TOS. The RAP test is a measure to ensure that we reduce the avenue of complexity and mistakes when dealing with RAP in post-si execution, where debugging failures related to RAP is quite difficult and expensive. v2: add introduction for RAP TA Signed-off-by:
-
Tianci.Yin authored
On Navi1x, the SPM golden settings are lost after GFXOFF enter/exit, so reconfigure the golden settings after GFXOFF exit. Reviewed-by:
Tianci.Yin <tianci.yin@amd.com> Signed-off-by:
-
Tianci.Yin authored
On Navi1x, the SPM golden settings are lost after GFXOFF enter/exit, so reconfiguration is needed. Make the configuration code as an interface for future use. Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Guchun Chen authored
Before ras recovery is issued, user could operate this debugfs node to enable/disable the harvest of all RAS IPs' ras error count registers, which will help keep hardware's registers' status instead of cleaning up them. Signed-off-by:
-
Guchun Chen authored
Once ras recovery is issued by ras sync flood interrupt or ras controller interrupt, add this guard to bypass or execute ras error count register harvest of all IPs. Signed-off-by:
-
- 11 Aug, 2020 1 commit
-
-
Arunpravin authored
Access the exported P2P dmabuf over XGMI, if available. Otherwise, fall back to the existing PCIe method. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Arunpravin <apaneers@amd.com> Signed-off-by:
-
- 10 Aug, 2020 22 commits
-
-
Qinglang Miao authored
Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu(). Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Alex Deucher authored
This is not longer used as of the latest rework of this code so drop it to avoid a unused function warning. Acked-by:
-
Daniel Kolesa authored
This adds ARM64 support into the DCN. This mainly enables support for Navi graphics cards. The dcn10 changes haven't been tested, since I don't have the relevant hardware available, but there is no way to conditionally disable them, so I've done them anyway. Signed-off-by:
Daniel Kolesa <daniel@octaforge.org> Signed-off-by:
-
Daniel Kolesa authored
GFP_KERNEL may and will sleep, and this is being executed in a non-preemptible context; this will mess things up since it's called inbetween DC_FP_START/END, and rescheduling will result in the DC_FP_END later being called in a different context (or just crashing if any floating point/vector registers/instructions are used after the call is resumed in a different context). Signed-off-by:
-
Jaehyun Chung authored
[Why] Stream disable sequence incorretly destroys HDCP session while stream is not blanked and while audio is not muted. This sequence causes a flash of corruption during mode change and an audio click. [How] Change sequence to blank stream before destroying HDCP session. Audio will also be muted by blanking the stream. Cc: stable@vger.kernel.org Signed-off-by:
Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
-
Stylon Wang authored
[Why] Resuming from suspend, CEA blocks from EDID are not parsed and no video modes can support YUV420. When this happens, output bpc cannot go over 8-bit with 4K modes on HDMI. [How] In amdgpu_dm_update_connector_after_detect(), drm_add_edid_modes() is called after drm_connector_update_edid_property() to fully parse EDID and update display info. Cc: stable@vger.kernel.org Signed-off-by:
Stylon Wang <stylon.wang@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Alvin Lee authored
[Why] When changing pixel formats for HDR (e.g. ARGB -> FP16) there are configurations that change from 2 pipes to 1 pipe. In these cases, it seems that disconnecting MPCC and doing a surface update at the same time(after unlocking) causes some registers to be updated slightly faster than others after unlocking (e.g. if the pixel format is updated to FP16 before the new surface address is programmed, we get corruption on the screen because the pixel formats aren't matching). We separate disconnecting MPCC from the rest of the pipe programming sequence to prevent this. [How] Move MPCC disconnect into separate operation than the rest of the pipe programming. Signed-off-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Anthony Koo authored
[Why] Using FRAME_UPDATE will result in infopacket to be potentially updated one frame late. In commit stream scenarios for previously active stream, some stale infopacket data from previous config might be erroneously sent out on initial frame after stream is re-enabled. [How] Switch to using IMMEDIATE_UPDATE mode Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Reviewed-by:
Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by:
-
Anthony Koo authored
[Why] 1. There is a calculation that is using frame_time_in_us instead of last_render_time_in_us to calculate whether choosing an LFC multiplier would cause the inserted frame duration to be outside of range. 2. We do not handle unsigned integer subtraction correctly and it underflows to a really large value, which causes some logic errors. [How] 1. Fix logic to calculate 'within range' using last_render_time_in_us 2. Split out delta_from_mid_point_delta_in_us calculation to ensure we don't underflow and wrap around Signed-off-by:
-
Xiaodong Yan authored
[Why] The format in MPCC should be 444 [How] do not modify the mpcc black color according to pixel encoding format Signed-off-by:
Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
-
Alvin Lee authored
[Why] Caused pipe split regression Signed-off-by:
-
Aric Cyr authored
[Why] Typo in backlight refactor inctroduced wrong register offset. [How] Change DCE to DCN register map for PWRSEQ_REF_DIV Cc: stable@vger.kernel.org Signed-off-by:
-
Joshua Aberback authored
[Why] Register definitions are asic-specific, so functions that use registers of a particular asic should be static, to be exposed in asic-specific function pointer structures. [How] - make register-definition-using functions static - make some functions non-static, for future use - remove duplicate function definition Signed-off-by:
Joshua Aberback <joshua.aberback@amd.com> Reviewed-by:
-
Monk Liu authored
GFX10 KIQ will hang if we try below steps: modprobe amdgpu rmmod amdgpu modprobe amdgpu sched_hw_submission=4 Due to KIQ is always living there even after KMD unloaded thus when doing the realod KIQ will crash upon its register being programed by different values with the previous loading (the config like HQD addr, ring size, is easily changed if we alter the sched_hw_submission) the fix is we must inactive KIQ first before touching any of its registgers Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
Emily Deng <Emily.Deng@amd.com> Signed-off-by:
-
shiwu.zhang authored
Update golden setting to improve performance on HPC and ML apps Signed-off-by:
shiwu.zhang <shiwu.zhang@amd.com> Tested-by:
gang.long <gang.long@amd.com> Reviewed-by:
-
Evan Quan authored
The UVD/VCE PG state is managed by UVD and VCE IP. It's error-prone to assume the bootup state in SMU based on the dpm status. Signed-off-by:
-
Evan Quan authored
Correct the cached smu feature state on pp_features sysfs setting. Signed-off-by:
-
Liu ChengZhe authored
Some registers are not accessible to virtual function setup, so skip their initialization when in VF-SRIOV mode. v2: move SRIOV VF check into specify functions; modify commit description and comment. Signed-off-by:
Liu ChengZhe <ChengZhe.Liu@amd.com> Reviewed-by:
-
Jay Cornwall authored
s_barrier triggers a debug exception when issued with PRIV=1, DEBUG_EN=1. This causes spurious notifications to rocm-gdb. Clear MODE before issuing s_barrier and restore MODE afterwards in the context restore handler. Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Tested-by:
Laurent Morichetti <laurent.morichetti@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Felix Kuehling authored
This reverts commit 0a5baee4. The change introduced a regression on some chips. Reverting until a proper solution can be found. Signed-off-by:
-
Felix Kuehling authored
This reverts commit ea368183. Needed due to conflicts when reverting "drm/amdkfd: Unify gfx9/gfx10 context save area layouts". Signed-off-by:
-
Christophe JAILLET authored
When '*sgt' is allocated, we must allocated 'sizeof(**sgt)' bytes instead of 'sizeof(*sg)'. The sizeof(*sg) is bigger than sizeof(**sgt) so this wastes memory but it won't lead to corruption. Fixes: f44ffd67 ("drm/amdgpu: add support for exporting VRAM using DMA-buf v3") Reviewed-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 07 Aug, 2020 2 commits
-
-
Sandeep Raghuraman authored
Reproducing bug report here: After hibernating and resuming, DPM is not enabled. This remains the case even if you test hibernate using the steps here: https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html I debugged the problem, and figured out that in the file hardwaremanager.c, in the function, phm_enable_dynamic_state_management(), the check 'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)' returns true for the hibernate case, and false for the suspend case. This means that for the hibernate case, the AMDGPU driver doesn't enable DPM (even though it should) and simply returns from that function. In the suspend case, it goes ahead and enables DPM, even though it doesn't need to. I debugged further, and found out that in the case of suspend, for the CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of hibernate, smum_is_dpm_running(hwmgr) returns true. For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function, which is ultimately used to determine if DPM is currently enabled or not, and this seems to provide the wrong answer. I've changed the ci_is_dpm_running() function to instead use the same method that some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller. I've tested on my R9 390 and it seems to work correctly for both suspend and hibernate use cases, and has been stable so far. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839Signed-off-by:
Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by:
-
Dennis Li authored
Make sure to unlock the mutex when error happen v2: 1. correct syntax error in the commit comments 2. remove change-Id Acked-by:
-
