- 29 Sep, 2006 40 commits
-
-
Olaf Hering authored
The on-disk data structures from AIX are not known, also the filesystem layout is not known. There is a msdos partition signature at the end of the first block, and the kernel recognizes 3 small (and overlapping) partitions. But they are not usable. Maybe the firmware uses it to find the bootloader for AIX, but AIX boots also if the first block is cleared. This is the content of the partition table: # dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be )) | xxd 0000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................ 0000010: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8... 0000020: 00ff ffff 41ff ffff 0211 0000 1900 0000 ....A........... 0000030: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8... Handle the whole disk as empty disk. This fixes also YaST which compares the output from parted (and formerly fdisk) with /proc/partitions. fdisk recognizes the AIX label since a long time, SuSE has a patch for parted to handle the disk label as unknown. dmesg will look like this: sda: [AIX] unknown partition table Tested on an IBM B50 with AIX V4.3.3. Signed-off-by:
Olaf Hering <olh@suse.de> Cc: Albert Cahalan <acahalan@gmail.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Matthias Urlichs authored
Unused: tty_struct.max_flip_cnt $ git grep max_flip_cnt include/linux/tty.h: int max_flip_cnt; $ Cc: Paul Fulghum <paulkf@microgate.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Shem Multinymous authored
This teaches dmi_decode() how to decode and save OEM Strings (type 11) DMI information, which is currently discarded silently. Existing code using DMI is not affected. Follows the "System Management BIOS (SMBIOS) Specification" (http://www.dmtf.org/standards/smbios), and also the userspace dmidecode.c code. OEM Strings are the only safe way to identify some hardware, e.g., the ThinkPad embedded controller used by the soon-to-be-submitted tp_smapi driver. This will also let us eliminate the long whitelist in the mainline hdaps driver (in a future patch). Signed-off-by:
Shem Multinymous <multinymous@gmail.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Josh Triplett authored
lock_timer_base acquires a lock and returns with that lock held. Add a lock annotation to this function so that sparse can check callers for lock pairing, and so that sparse will not complain about this function since it intentionally uses the lock in this manner. Signed-off-by:
Josh Triplett <josh@freedesktop.org> Signed-off-by:
-
Miklos Szeredi authored
In the "operation does permission checking" model used by fuse, chdir permission is not checked, since there's no chdir method. For this case set a lookup flag, which will be passed to ->permission(), so fuse can distinguish it from permission checks for other operations. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Miklos Szeredi authored
Some filesystems may want to report different values depending on the path within the filesystem, i.e. one mount is actually several filesystems. This can be the case for a network filesystem exported by an unprivileged server (e.g. sshfs). This is now possible, thanks to David Howells "VFS: Permit filesystem to perform statfs with a known root dentry" patch. This change is backward compatible, so no need to change interface version. Signed-off-by:
-
Mark Huang authored
Initialize module_subsys earlier (or at least earlier than devices) since it could be used very early in the boot process if kmod loads a module before the device initcalls. Otherwise, kmod will crash in kernel/module.c:mod_sysfs_setup() since the kset in module_subsys is not initialized yet. I only noticed this problem because occasionally, kmod loads the modules for my SCSI and Ethernet adapters very early, during the boot process itself. I don't quite understand why it loads them sometimes and doesn't load them other times. Or who is telling kmod to do so. Can someone explain? Signed-off-by:
Mark Huang <mlhuang@cs.princeton.edu> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Eugene Teo authored
Files supported by fs/proc/base.c, i.e. /proc/<pid>/*, are not capable of meeting the validity checks in ELF load_elf_*() handling because they have no mmap handler which is required by ELF. In order to stop a.out executables being used as part of an exploit attack against /proc-related vulnerabilities, we make a.out executables depend on ->mmap() existing. Signed-off-by:
Eugene Teo <eteo@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Sukadev Bhattiprolu authored
Replace kernel_thread() call in drivers/base/firmware_class.c with kthread_create() since kernel_thread() is deprecated in drivers. Signed-off-by:
Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Manuel Estrada Sainz <ranty@debian.org> Acked-by:
-
Josh Triplett authored
rcu_torture_read_lock and rcu_bh_torture_read_lock acquire locks without releasing them, and the matching functions rcu_torture_read_unlock and rcu_bh_torture_read_unlock get called with the corresponding locks held and release them. Add lock annotations to these four functions so that sparse can check callers for lock pairing, and so that sparse will not complain about these functions since they intentionally use locks in this manner. Signed-off-by:
Paul McKenney <paulmck@us.ibm.com> Signed-off-by:
-
Josh Triplett authored
grab_super gets called with sb_lock held, and releases it. Add a lock annotation to this function so that sparse can check callers for lock pairing, and so that sparse will not complain about this function since it intentionally uses the lock in this manner. Signed-off-by:
-
Michael S. Tsirkin authored
Do not pull in various includes through lockdep.h if lockdep is disabled. Signed-off-by:
Michael S. Tsirkin <mst@mellanox.co.il> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Josh Triplett authored
hugetlbfs_forget_inode releases inode_lock. Add a lock annotation to this function so that sparse can check callers for lock pairing, and so that sparse will not complain about this functions since it intentionally uses the lock in this manner. Signed-off-by:
-
Josh Triplett authored
request_end and fuse_read_interrupt release fc->lock. Add lock annotations to these two functions so that sparse can check callers for lock pairing, and so that sparse will not complain about these functions since they intentionally use locks in this manner. Signed-off-by:
-
Josh Triplett authored
afs_proc_cell_servers_start acquires a lock, and afs_proc_cell_servers_stop releases that lock. Add lock annotations to these two functions so that sparse can check callers for lock pairing, and so that sparse will not complain about these functions since they intentionally use locks in this manner. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Josh Triplett authored
__mb_cache_entry_release_unlock releases mb_cache_spinlock, so annotate it accordingly. Signed-off-by:
-
Josh Triplett authored
The functions efi_call_phys_prelog and efi_call_phys_epilog in arch/i386/kernel/efi.c wrap the spinlock efi_rt_lock: efi_call_phys_prelog returns with the lock held, and efi_call_phys_epilog releases the lock without acquiring it. Add lock annotations to these two functions so that sparse can check callers for lock pairing, and so that sparse will not complain about these functions since they intentionally use locks in this manner. Signed-off-by:
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
-
Yoichi Yuasa authored
Signed-off-by:
-
Olaf Hering authored
Only compile with -O1 if the (very old) compiler is broken. We use reiserfs alot since SLES9 on ppc64, and it was never seen with gcc33. Assume the broken gcc is gcc-3.4 or older. Signed-off-by:
-
Komal Shah authored
This patch adds keymapsize, delay and debounce flag in the keypad platform data for various TI OMAP1/2 based boards like F-sample, H2, H3, Innovator, Nokia770, OSK, Perseus and H4. Signed-off-by:
Komal Shah <komal_shah802003@yahoo.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Komal Shah authored
This patch adds support for keypad driver running on different TI OMAP(http://www.ti.com/omap) processor based boards like OSK, H2, H3, H4, Persuas and Nokia 770. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Komal Shah authored
Add Texas Instruments (TI) OMAP1/2 (http://www.ti.com/omap) based processors, like OMAP1610/1710/242x. [akpm@osdl.org: cleanups] Cc: <gdavis@mvista.com> Cc: "Komal Shah" <komal_shah802003@yahoo.com> Signed-off-by:
-
Komal Shah authored
Add smc91x support for TI OMAP2420 H4 EVM board. Cc: <nico@cam.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Chuck Ebbert authored
In spinlock_debug.c, the spinloops call __delay() on every iteration. Because that is an external function, (jiffies_per_loop * HZ), the loop's iteration limit, gets recomputed every time. Caching it explicitly prevents that. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Rolf Eike Beer authored
Change parameter names to match arguments of functions. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Martin Waitz <tali@admingilde.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Rolf Eike Beer authored
drivers/base/class.c is omitted by "make *docs". Add it to get documentation for class_create() and friends for free. Signed-off-by:
-
Serge E. Hallyn authored
Convert loop.c from the deprecated kernel_thread to kthread. This patch simplifies the code quite a bit and passes similar testing to the previous submission on both emulated x86 and s390. Changes since last submission: switched to using a rather simple loop based on wait_event_interruptible. Signed-off-by:
Serge E. Hallyn <serue@us.ibm.com> Signed-off-by:
-
Randy Dunlap authored
Move all VFS + filesystem docs together. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Randy Dunlap authored
Add relay interface support to DocBook/kernel-api.tmpl. Fix typos etc. in relay.c and relayfs.txt. Signed-off-by:
Tom Zanussi <zanussi@us.ibm.com> Signed-off-by:
-
Pekka J Enberg authored
Remove the unnecessary PageUptodate check from simple_readpage. The only two callers for ->readpage that don't have explicit PageUptodate check are read_cache_pages and page_cache_read which operate on newly allocated pages which don't have the flag set. [akpm: use the allegedly-faster clear_page(), too] Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Chris Boot authored
Make the next48xx LED code use scx200_gpio_ops instead of raw SCx200 GPIO accesses. Signed-off-by:
Chris Boot <bootc@bootc.net> Signed-off-by:
-
Chris Boot authored
Use EXPORT_SYMBOL_GPL for new symbols, and declare the struct in the header file for access by other modules. Signed-off-by:
-
Herbert Xu authored
Letting WARN_ON/WARN_ON_ONCE return the condition means that you could do if (WARN_ON(blah)) { handle_impossible_case } Rather than if (unlikely(blah)) { WARN_ON(1) handle_impossible_case } I checked all the newly added WARN_ON_ONCE users and none of them test the return status so we can still change it. [akpm@osdl.org: warning fix] [akpm@osdl.org: build fix] Signed-off-by:Herbert Xu <herbert@gondor.apana.org.au> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Adrian Bunk authored
drivers/char/pc8736x_gpio.c:192: warning: #pc8736x_gpio_set_high# defined but not used drivers/char/pc8736x_gpio.c:197: warning: #pc8736x_gpio_set_low# defined but not used Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Jim Cromie authored
This patch makes a needlessly global variable static. Signed-off-by:
-
Steven Rostedt authored
Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Michal Schmidt authored
touch_nmi_watchdog() calls touch_softlockup_watchdog() on both architectures that implement it (i386 and x86_64). On other architectures it does nothing at all. touch_nmi_watchdog() should imply touch_softlockup_watchdog() on all architectures. Suggested by Andi Kleen. [heiko.carstens@de.ibm.com: s390 fix] Signed-off-by:
Michal Schmidt <xschmi00@stud.feec.vutbr.cz> Cc: Andi Kleen <ak@muc.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Schmidt <xschmi00@stud.feec.vutbr.cz> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Manfred Spraul authored
A list_del() debugging check. Has been in -mm for years. Dave moved list_del() out-of-line in the debug case, so this is now suitable for mainline. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Dave Jones authored
Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
