We get 1 warning when building kernel with W=1:
drivers/net/ethernet/broadcom/genet/bcmgenet.c:2763:5: warning: no previous prototype for 'bcmgenet_hfb_add_filter' [-Wmissing-prototypes]

In fact, this function is implemented in
drivers/net/ethernet/broadcom/genet/bcmgenet.c, but be called
by no one, thus can be removed.

So this patch removes the unused functions.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 10 warnings when building kernel with W=1:
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:304:5: warning: no previous prototype for 'cxgb4_dcb_enabled' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:194:5: warning: no previous prototype for 'setup_sge_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:241:6: warning: no previous prototype for 'free_sge_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:268:5: warning: no previous prototype for 'cfg_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:344:6: warning: no previous prototype for 'free_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:353:5: warning: no previous prototype for 'request_msix_queue_irqs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:379:6: warning: no previous prototype for 'free_msix_queue_irqs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:393:6: warning: no previous prototype for 'name_msix_vecs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:433:6: warning: no previous prototype for 'enable_rx_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:442:6: warning: no previous prototype for 'quiesce_rx_uld' [-Wmissing-prototypes]

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 2 warnings when building kernel with W=1:
drivers/net/ethernet/marvell/mvneta.c:639:27: warning: no previous prototype for 'mvneta_get_stats64' [-Wmissing-prototypes]
drivers/net/ethernet/marvell/mvneta.c:3529:5: warning: no previous prototype for 'mvneta_ethtool_set_link_ksettings' [-Wmissing-prototypes]

In fact, these two functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 1 warning when building kernel with W=1:
drivers/net/ethernet/hisilicon/hip04_eth.c:603:22: warning: no previous prototype for 'tx_done' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
so this patch marks this function with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 2 warnings when building kernel with W=1:
drivers/net/ethernet/hisilicon/hisi_femac.c:943:5: warning: no previous prototype for 'hisi_femac_drv_suspend' [-Wmissing-prototypes]
drivers/net/ethernet/hisilicon/hisi_femac.c:960:5: warning: no previous prototype for 'hisi_femac_drv_resume' [-Wmissing-prototypes]

In fact, these two functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2016-09-25

Here are a few more Bluetooth & 802.15.4 patches for the 4.9 kernel that
have popped up during the past week:

 - New USB ID for QCA_ROME Bluetooth device
 - NULL pointer dereference fix for Bluetooth mgmt sockets
 - Fixes for BCSP driver
 - Fix for updating LE scan response

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

drivers/net/dsa/mv88e6xxx/chip.c:219:5: warning:
 symbol 'mv88e6xxx_port_read' was not declared. Should it be static?
drivers/net/dsa/mv88e6xxx/chip.c:227:5: warning:
 symbol 'mv88e6xxx_port_write' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

drivers/net/ethernet/emulex/benet/be_main.c:47:25: warning:
 symbol 'be_err_recovery_workq' was not declared. Should it be static?
drivers/net/ethernet/emulex/benet/be_main.c:63:25: warning:
 symbol 'be_wq' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This aligns smc91x with its cousin, namely smc911x.c.
This also allows the driver to run also in a device-tree based lubbock
board build, on which it was tested.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

iq is unsigned, so the error check for iq < 0 has no effect so errors
can slip past this check.  Fix this by making iq signed and also
get_filter_steerq return a signed int so a -ve error can be returned.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree, they are:

1) Consolidate GRE protocol tracker using new GRE protocol definitions,
   patches from Gao Feng.

2) Properly parse continuation lines in SIP helper, update allowed
   characters in Call-ID header and allow tabs in SIP headers as
   specified by RFC3261, from Marco Angaroni.

3) Remove useless code in FTP conntrack helper, also from Gao Feng.

4) Add number generation expression for nf_tables, with random and
   incremental generators. This also includes specific offset to add
   to the result, patches from Laura Garcia Liebana. Liping Zhang
   follows with a fix to avoid a race in this new expression.

5) Fix new quota expression inversion logic, added in the previous
   pull request.

6) Missing validation of queue configuration in nft_queue, patch
   from Liping Zhang.

7) Remove unused ctl_table_path, as part of the deprecation of the
   ip_conntrack sysctl interface coming in the previous batch.
   Again from Liping Zhang.

8) Add offset attribute to nft_hash expression, so we can generate
   any output from a specific base offset. Moreover, check for
   possible overflow, patches from Laura Garcia.

9) Allow to invert dynamic set insertion from packet path, to check
   for overflows in case the set is full.

10) Revisit nft_set_pktinfo*() logic from nf_tables to ensure
    proper initialization of layer 4 protocol. Consolidate pktinfo
    structure initialization for bridge and netdev families.

11) Do not inconditionally drop IPv6 packets that we cannot parse
    transport protocol for ip6 and inet families, let the user decide
    on this via ruleset policy.

12) Get rid of gotos in __nf_ct_try_assign_helper().

13) Check for return value in register_netdevice_notifier() and
    nft_register_chain_type(), patches from Gao Feng.

14) Get rid of CONFIG_IP6_NF_IPTABLES dependency in nf_queue
    infrastructure that is common to nf_tables, from Liping Zhang.

15) Disable 'found' and 'searched' stats that are updates from the
    packet hotpath, not very useful these days.

16) Validate maximum value of u32 netlink attributes in nf_tables,
    this introduces nft_parse_u32_check(). From Laura Garcia.

17) Add missing code to integrate nft_queue with maps, patch from
    Liping Zhang. This also includes missing support ranges in
    nft_queue bridge family.

18) Fix check in nft_payload_fast_eval() that ensure that we don't
    go over the skbuff data boundary, from Liping Zhang.

19) Check if transport protocol is set from nf_tables tracing and
    payload expression. Again from Liping Zhang.

20) Use net_get_random_once() whenever possible, from Gao Feng.

21) Replace hardcoded value by sizeof() in xt_helper, from Gao Feng.

22) Remove superfluous check for found element in nft_lookup.

23) Simplify TCPMSS logic to check for minimum MTU, from Gao Feng.

24) Replace double linked list by single linked list in Netfilter
    core hook infrastructure, patchset from Aaron Conole. This
    includes several patches to prepare this update.

25) Fix wrong sequence adjustment of TCP RST with no ACK, from
    Gao Feng.

26) Relax check for direction attribute in nft_ct for layer 3 and 4
    protocol fields, from Liping Zhang.

27) Add new revision for hashlimit to support higher pps of upto 1
    million, from Vishwanath Pai.

28) Evict stale entries in nf_conntrack when reading entries from
    /proc/net/nf_conntrack, from Florian Westphal.

29) Fix transparent match for IPv6 request sockets, from Krisztian
    Kovacs.

30) Add new range expression for nf_tables.

31) Add missing code to support for flags in nft_log. Expose NF_LOG_*
    flags via uapi and use it from the generic logging infrastructure,
    instead of using xt specific definitions, from Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	net/netfilter/core.c
	net/netfilter/nf_tables_netdev.c

Resolve two conflicts before pull request for David's net-next tree:

1) Between c73c2484 ("netfilter: nf_tables_netdev: remove redundant
   ip_hdr assignment") from the net tree and commit ddc8b602
   ("netfilter: introduce nft_set_pktinfo_{ipv4, ipv6}_validate()").

2) Between e8bffe0c ("net: Add _nf_(un)register_hooks symbols") and
   Aaron Conole's patches to replace list_head with single linked list.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

nf_log is used by both nftables and iptables, so use XT_LOG_XXX macros
here is not appropriate. Replace them with NF_LOG_XXX.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

NFTA_LOG_FLAGS attribute is already supported, but the related
NF_LOG_XXX flags are not exposed to the userspace. So we cannot
explicitly enable log flags to log uid, tcp sequence, ip options
and so on, i.e. such rule "nft add rule filter output log uid"
is not supported yet.

So move NF_LOG_XXX macro definitions to the uapi/../nf_log.h. In
order to keep consistent with other modules, change NF_LOG_MASK to
refer to all supported log flags. On the other hand, add a new
NF_LOG_DEFAULT_MASK to refer to the original default log flags.

Finally, if user specify the unsupported log flags or NFTA_LOG_GROUP
and NFTA_LOG_FLAGS are set at the same time, report EINVAL to the
userspace.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Inverse ranges != [a,b] are not currently possible because rules are
composites of && operations, and we need to express this:

	data < a || data > b

This patch adds a new range expression. Positive ranges can be already
through two cmp expressions:

	cmp(sreg, data, >=)
	cmp(sreg, data, <=)

This new range expression provides an alternative way to express this.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The introduction of TCP_NEW_SYN_RECV state, and the addition of request
sockets to the ehash table seems to have broken the --transparent option
of the socket match for IPv6 (around commit a9407000).

Now that the socket lookup finds the TCP_NEW_SYN_RECV socket instead of the
listener, the --transparent option tries to match on the no_srccheck flag
of the request socket.

Unfortunately, that flag was only set for IPv4 sockets in tcp_v4_init_req()
by copying the transparent flag of the listener socket. This effectively
causes '-m socket --transparent' not match on the ACK packet sent by the
client in a TCP handshake.

Based on the suggestion from Eric Dumazet, this change moves the code
initializing no_srccheck to tcp_conn_request(), rendering the above
scenario working again.

Fixes: a9407000 ("netfilter: xt_socket: prepare for TCP_NEW_SYN_RECV support")
Signed-off-by: Alex Badics <alex.badics@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Fabian reports a possible conntrack memory leak (could not reproduce so
far), however, one minor issue can be easily resolved:

> cat /proc/net/nf_conntrack | wc -l = 5
> 4 minutes required to clean up the table.

We should not report those timed-out entries to the user in first place.
And instead of just skipping those timed-out entries while iterating over
the table we can also zap them (we already do this during ctnetlink
walks, but I forgot about the /proc interface).

Fixes: f330a7fd ("netfilter: conntrack: get rid of conntrack timer")
Reported-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Create a new revision for the hashlimit iptables extension module. Rev 2
will support higher pps of upto 1 million, Version 1 supports only 10k.

To support this we have to increase the size of the variables avg and
burst in hashlimit_cfg to 64-bit. Create two new structs hashlimit_cfg2
and xt_hashlimit_mtinfo2 and also create newer versions of all the
functions for match, checkentry and destroy.

Some of the functions like hashlimit_mt, hashlimit_mt_check etc are very
similar in both rev1 and rev2 with only minor changes, so I have split
those functions and moved all the common code to a *_common function.
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

I am planning to add a revision 2 for the hashlimit xtables module to
support higher packets per second rates. This patch renames all the
functions and variables related to revision 1 by adding _v1 at the
end of the names.
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

NFT_CT_MARK is unrelated to direction, so if NFTA_CT_DIRECTION attr is
specified, report EINVAL to the userspace. This validation check was
already done at nft_ct_get_init, but we missed it in nft_ct_set_init.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Currently, if the user want to match ct l3proto, we must specify the
direction, for example:
  # nft add rule filter input ct original l3proto ipv4
                                 ^^^^^^^^
Otherwise, error message will be reported:
  # nft add rule filter input ct l3proto ipv4
  nft add rule filter input ct l3proto ipv4
  <cmdline>:1:1-38: Error: Could not process rule: Invalid argument
  add rule filter input ct l3proto ipv4
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Actually, there's no need to require NFTA_CT_DIRECTION attr, because
ct l3proto and protocol are unrelated to direction.

And for compatibility, even if the user specify the NFTA_CT_DIRECTION
attr, do not report error, just skip it.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

It is valid that the TCP RST packet which does not set ack flag, and bytes
of ack number are zero. But current seqadj codes would adjust the "0" ack
to invalid ack number. Actually seqadj need to check the ack flag before
adjust it for these RST packets.

The following is my test case

client is 10.26.98.245, and add one iptable rule:
iptables  -I INPUT -p tcp --sport 12345 -m connbytes --connbytes 2:
--connbytes-dir reply --connbytes-mode packets -j REJECT --reject-with
tcp-reset
This iptables rule could generate on TCP RST without ack flag.

server:10.172.135.55
Enable the synproxy with seqadjust by the following iptables rules
iptables -t raw -A PREROUTING -i eth0 -p tcp -d 10.172.135.55 --dport 12345
-m tcp --syn -j CT --notrack

iptables -A INPUT -i eth0 -p tcp -d 10.172.135.55 --dport 12345 -m conntrack
--ctstate INVALID,UNTRACKED -j SYNPROXY --sack-perm --timestamp --wscale 7
--mss 1460
iptables -A OUTPUT -o eth0 -p tcp -s 10.172.135.55 --sport 12345 -m conntrack
--ctstate INVALID,UNTRACKED -m tcp --tcp-flags SYN,RST,ACK SYN,ACK -j ACCEPT

The following is my test result.

1. packet trace on client
root@routers:/tmp# tcpdump -i eth0 tcp port 12345 -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [S], seq 3695959829,
win 29200, options [mss 1460,sackOK,TS val 452367884 ecr 0,nop,wscale 7],
length 0
IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [S.], seq 546723266,
ack 3695959830, win 0, options [mss 1460,sackOK,TS val 15643479 ecr 452367884,
nop,wscale 7], length 0
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [.], ack 1, win 229,
options [nop,nop,TS val 452367885 ecr 15643479], length 0
IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [.], ack 1, win 226,
options [nop,nop,TS val 15643479 ecr 452367885], length 0
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [R], seq 3695959830,
win 0, length 0

2. seqadj log on server
[62873.867319] Adjusting sequence number from 602341895->546723267,
ack from 3695959830->3695959830
[62873.867644] Adjusting sequence number from 602341895->546723267,
ack from 3695959830->3695959830
[62873.869040] Adjusting sequence number from 3695959830->3695959830,
ack from 0->55618628

To summarize, it is clear that the seqadj codes adjust the 0 ack when receive
one TCP RST packet without ack.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The netfilter hook list never uses the prev pointer, and so can be trimmed to
be a simple singly-linked list.

In addition to having a more light weight structure for hook traversal,
struct net becomes 5568 bytes (down from 6400) and struct net_device becomes
2176 bytes (down from 2240).
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2016-09-24

This series contains updates to i40e and i40evf only.

Harshitha removes the ability to set or advertise X722 to 100 Mbps,
since it is not supported, so we should not be able to advertise or
set the NIC to 100 Mbps.

Alan fixes an issue where deleting a MAC filter did not really delete the
filter in question.  The reason being that the wrong cmd_flag is passed to
the firmware.

Preethi adds the encapsulation checksum offload negotiation flag, so that
we can control it.

Jake cleans up the ATR auto_disable_flags use, since some locations
disable ATR accidentally using the "full" disable by disabling the flag
in the standard flags field.  This permanently forces ATR off instead of
temporarily disabling it.  Then updated checks to include when there are
TCP/IP4 sideband rules in effect, where ATR should be disabled.  Lastly,
adds support to the i40evf driver for setting interrupt moderation values
per queue, like in i40e.

Henry cleans up unreachable code, since i40e_shutdown_adminq() is always
true.

Mitch enables support for adaptive interrupt throttling, since all the
code for it is already in the interrupt handler.  The fixes a rare
case where we might get a VSI with no queues and we try to configure
RSS, which would result in a divide by zero.

Alex fixes an issue where transmit cleanup flow was incorrectly assuming
it could check for the flow director bits after it had unmapped the
buffer.  Then adds a txring_txq() to allow us to convert a i40e_ring/
i40evf_ring to a netdev_tx_queue structure, like ixgbe and fm10k.  This
avoids having to make a multi-line function call for all the areas that
need access to it.  Re-factors the Flow Director filter configuration
out into a separate function, like we did for the standard xmit path.
Cleans up the debugfs hook for Flow Director since it was meant for
debug only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'rxrpc-rewrite-20160924' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Implement slow-start and other bits

This set of patches implements the RxRPC slow-start feature for AF_RXRPC to
improve performance and handling of occasional packet loss.  This is more or
less the same as TCP slow start [RFC 5681].  Firstly, there are some ACK
generation improvements:

 (1) Send ACKs regularly to apprise the peer of our state so that they can do
     congestion management of their own.

 (2) Send an ACK when we fill in a hole in the buffer so that the peer can
     find out that we did this thus forestalling retransmission.

 (3) Note the final DATA packet's serial number in the final ACK for
     correlation purposes.

and a couple of bug fixes:

 (4) Reinitialise the ACK state and clear the ACK and resend timers upon
     entering the client reply reception phase to kill off any pending probe
     ACKs.

 (5) Delay the resend timer to allow for nsec->jiffies conversion errors.

and then there's the slow-start pieces:

 (6) Summarise an ACK.

 (7) Schedule a PING or IDLE ACK if the reply to a client call is overdue to
     try and find out what happened to it.

 (8) Implement the slow start feature.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit a75e8005 ("i40e: queue-specific settings for interrupt
moderation") the i40e driver gained support for setting interrupt
moderation values per queue. This patch adds support for this feature
to the i40evf driver as well. In addition, a few changes are made to
the i40e implementation to add function header documentation comments,
as well.

This behaves in a similar fashion to the implementation in i40e. Thus,
requesting the moderation value when no queue is provided will report
queue 0 value, while setting the value without a queue will set all
queues at once.

Change-ID: I1f310a57c8e6c84a8524c178d44d1b7a6d3a848e
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In some rare cases, we might get a VSI with no queues. In this case, we
cannot configure RSS on this VSI as it will try to divide by zero when
configuring the lookup table.

Change-ID: I6ae173a7dd3481a081e079eb10eb80275de2adb0
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This  interface was only ever meant for debug only. Since it is not
supposed to be here we are removing it.

Change-ID: Id771a1e5e7d3e2b4b7f56591b61fb48c921e1d04
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In an effort to improve code readability I am splitting the Flow Director
filter configuration out into a separate function like we have done for the
standard xmit path.  The general idea is to provide a single block of code
that translates the flow specification into a proper Flow Director
descriptor.

Change-ID: Id355ad8030c4e6c72c57504fa09de60c976a8ffe
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds a txring_txq function which allows us to convert a
i40e_ring/i40evf_ring to a netdev_tx_queue structure.  This way we
can avoid having to make a multi-line function call for all the spots
that need access to this.

Change-ID: Ic063b71d8b92ea406d2c32e798c8e2b02809d65b
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The Tx cleanup flow was incorrectly assuming it could check for the flow
director bits after it had unmapped the buffer.  However in this case it
results in us trying to free a raw_buf as though it is an sk_buff.

To fix this I am moving up the flag test for the FD_SB bit so that when
find a non-NULL skb or raw_buf value we then check the flag and use the
appropriate call to free the buffer.

Change-ID: I6284034ba1ea87c9922e56f6eb3181f7f09bddde
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

All of the code to support adaptive interrupt throttling is already in
the interrupt handler, it just needs to be enabled. Fill out the data
structures properly to make it happen. Single-flow traffic tests may
show slightly lower throughput, but interrupts per second will drop by
about 75%.

Change-ID: I9cd7d42c025b906bf1bb85c6aeb6112684aa6471
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch increases minimum number of allocated VSIs, so as to resolve
failure adding VSI for VF when 64-VFs assigned to a PF. The driver
supports up to 128 VFs per device, users can decide to enable up to
64-VFs on a single PF, especially 2 X 40 devices. In that scenario, with
VMDq co-existence, there would be starvation of VSIs - with this patch,
supported features would have enough VSIs for configuration now.

Change-ID: If084f4cd823667af8fe7fdc11489c705b32039d5
Signed-off-by: Akeem Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The return value from i40e_shutdown_adminq() is always 0
(I40E_SUCCESS). So, the test for non-0 will never be true. Cleanup
by removing the test and debug print statement.

Change-ID: Ie51e8e37515c3e3a6a9ff26fa951d0e5e24343c1
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In i40e_fdir_check_and_reenable(), the driver performs some checks to
determine whether it is safe to re-enable FD Sideband and FD ATR
support. The current check will only determine if there is available
space in the flow director table. However, this ignores the fact that
ATR should be disabled when there are TCP/IPv4 sideband rules in effect.
Add the missing check, and update the info message printed when
I40E_DEBUG_FD is enabled.

Change-ID: Ibb9c63e5be95d63c53a498fdd5dbf69f54a00e08
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Some locations that disable ATR accidentally used the "full" disable by
disabling the flag in the standard flags field. This incorrectly forces
ATR off permanently instead of temporarily disabling it. In addition,
some code locations accidentally set the ATR flag enabled when they only
meant to clear the auto_disable_flags. This results in ignoring the
user's ethtool private flag settings.

Additionally, when disabling ATR via ethtool, we did not perform a flush
of the FD table. This results in the previously assigned ATR rules still
functioning which was not expected.

Cleanup all these areas so that automatic disable uses only the
auto_disable_flag. Fix the flush code so that we can trigger a flush
even when we've disabled ATR and SB support, as otherwise the flush
doesn't work. Fix ethtool setting to actually request a flush. Fix
NETIF_F_NTUPLE flag to only clear the auto_disable setting and not
enable the full feature.

Change-ID: Ib2486111f8031bd16943e9308757b276305c03b5
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add ENCAP_CSUM offload negotiation flag. Currently VF assumes checksum
offload for encapsulated packets is supported by default. Going forward,
this feature needs to be negotiated with PF before advertising to the
stack. Hence, we need a flag to control it.
This is in regards to prepping up for VF base mode functionality support.

Change-ID: Iaab1f25cc0abda5f2fbe3309092640f0e77d163e
Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

There exists a bug in which deleting a mac filter does not actually
occur.  The driver reports that the filter has been deleted with no
error.  The problem occurs because the wrong cmd_flag is passed to the
firmware when deleting the filter.  The firmware reports an error back
to the driver but it is expressly ignored.

This fixes the bug by using the correct flag when deleting a filter.
Without this patch, deleted filters remain in firmware and function as
if they had not been deleted.

Change-ID: I5f22b874f3b83f457702f18f0d5602ca21ac40c3
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes the problem where driver shows 100 Mbps as a supported speed,
and allows it to be configured for advertising on X722 devices. This patch
fixes the problem by not setting the 100 Mbps SGMII flag for X722 devices.

Without this patch, the user incorrectly thinks that 100 Mbps is supported
and hence might try to advertise it on X722 devices when it is actually not
a supported speed.

Change-ID: I8c3d7c4251a9402d98994ed29749b7b895a0f205
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>