- 13 Oct, 2008 22 commits
-
-
Laurent Pinchart authored
This adds required quirks for the Compaq Presario B1200 and Acer Travelmate 7720 integrated webcams. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Brian Rogers authored
The IR controller has a couple quirks. It won't respond until some other device on the bus is probed. To work around that, probe 0x50 first. Then, since it won't respond to a zero-byte read, probe with a one-byte read. Signed-off-by:
Brian Rogers <brian_rogers@comcast.net> [mchehab.redhat.com: Fix merge conflicts and remove an unused var] Signed-off-by:
-
Huang Weiyi authored
Removed duplicated include "media/cx2341x.h" in drivers/media/video/cx23885/cx23885-417.c. Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Ian Armstrong authored
Modified yuv register update handling to remove a potential race condition which could occur with the first video frame. Also removed a forced yuv position update, since changing the source video dimensions or interlace settings doesn't affect the frame already being displayed. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Ian Armstrong authored
When the framebuffer format was queried via VIDIOC_G_FBUF, V4L2_FBUF_FLAG_OVERLAY would only be correctly returned for certain screen depths. Signed-off-by:
-
Ian Armstrong authored
Signed-off-by:
-
Ian Armstrong authored
Signed-off-by:
-
Hans Verkuil authored
The service_set field was used in saa7115 and cx25840 to determine whether raw or sliced VBI was desired. This is incorrect since it is perfectly valid to select sliced VBI with a service_set of 0. Instead these drivers should checked on VIDIOC_S_FMT whether the type field matches the raw or sliced VBI type. Updated ivtv accordingly. Signed-off-by:
-
Hans Verkuil authored
Remove the vidioc_enum_fmt_vbi_cap ops: it was scheduled for removal in 2.6.28 since the v4l2 specification says that V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT. It's also pretty pointless. Signed-off-by:
-
Hans Verkuil authored
Add missing include. Signed-off-by:
-
Hans Verkuil authored
Suggested by Martin Dauskardt. This is conform what the other drivers do. Signed-off-by:
-
Thierry MERLE authored
In dvb_init(), case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: can be put in the same case than EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 since they do the same thing. Signed-off-by:Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
-
Alexey Klimov authored
This patch adds printk messages, adds checking if frequency is set, adds return -EINVAL in right places in zoltrix-radio. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by:
-
Alexey Klimov authored
Added return -EBUSY and fixed codingstyle issue Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Herbert Graeber authored
- Add USB ID for MSI DIGIVOX mini III (1462:8807) Signed-off-by:
Herbert Graeber <herbert@graeber-clan.de> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
- cast firmware data to u8 - remove cpu_to_le16 from switch-case label Signed-off-by:
-
Antti Palosaari authored
- remove unnecessary #undef's Signed-off-by:
-
Antti Palosaari authored
- enable Maxlinear mxl5005s tuner RSSI Thaks to Jose Alberto for finding this setting. Thanks-to: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Antti Palosaari authored
- fix wrong GPIO that causes 2nd FE not to work ater warmboot Thanks to Andrew Williams <andrew.williams@joratech.com> for reporting this. Signed-off-by:
-
Antti Palosaari authored
- add module parameter for selecting DVB-T / DVB-C mode Signed-off-by:
-
Antti Palosaari authored
- unlock I2C-mutex also in error case Signed-off-by:
-
- 12 Oct, 2008 18 commits
-
-
Hans Verkuil authored
Prevent the zoran driver sources from cluttering the video directory. This changeset only moves the drivers and it does not fix any of the checkpatch warnings/errors to keep the changeset clean. Signed-off-by:
-
Tim Farrington authored
Well, one thing you encouraged me to do was re-test some of my cards which contained the xc3028-zarlink combo. Which led me to test a Dvico FusionHDTV Pro. Almost a year ago, Chris Pascoe did a patch for this which can be found at his ~pascoe/xc-test at Linuxtv. This worked very well, however that was using his version of firmware. Alas, someone attempted to use this and patch v4l-dvb, and messed it up. So I've fixed it. I enclose the patch against today's tree (containing your latest tuner-xc2028.c patch). The card now works very well, well with DVB-T anyway. Signed-off-by:
Tim Farrington <timf@iinet.net.au> Signed-off-by:
-
Hans Verkuil authored
The v4l core creates four different video devices (video, vbi, radio, vtx) and each has its own range of minor numbers. However, modern devices keep increasing the number of devices that they need so a maximum of 64 video devices will not be enough in the future. In addition this scheme makes it very hard to add new device types. This patch disconnects the kernel number allocation (e.g. video0, video1, etc.) from the actual minor number (just pick the first free minor). This allows for much more flexibility in the future. However, it does require the use of udev. For those who cannot use udev a new CONFIG option was created that changes the allocation scheme back to the old behavior. Thanks to Greg KH for suggesting this approach during the 2008 LPC. In addition, several bugs were fixed in the ivtv and cx18 drivers: these drivers try to allocate specific kernel numbers but that scheme contained a bug which caused what should have been e.g. video17 to appear as e.g. video2. Signed-off-by:
-
Andy Walls authored
cx18: Fix warning message for DMA done notification for inactive stream. The warning message would always gripe that the radio stream was to blame, which was misleading and wrong (/dev/radioN nodes never transfer data). Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
cx18: Add entries for the Leadtek PVR2100 and Toshiba Qosmio DVB-T/Analog capture cards. Both cards are hybrids cards, but no digital capture functionality has been added yet. These entries are a first guess at the card entries to get analog working, given the information available. Terry Wu <terrywu at leadtek.com.tw> provided a pointer to information for the PVR2100. Martin Juhl <mj at casalogic.dk>, an owner of the Toshiba DVB-T/Analog tuner card, provided the DDR timing information from his Windows inf file. Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
- separate functions for bridge and sensor exchanges - delays added after some exchanges - other sensor type Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Erik Andren authored
Signed-off-by:
Erik Andren <erik.andren@gmail.com> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Greg Kroah-Hartman authored
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Cc: Douglas Landgraf <dougsland@gmail.com> Cc: Mike Isely <isely@pobox.com> Cc: Thierry Merle <thierry.merle@free.fr> Cc: Antoine Jacquet <royale@zerezo.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Devin Heitmueller authored
Put callback definition before function return and cleanup callback: Fix a bug where the xc5000 callback was being set *after* the return call (essentially resulting in dead code). Also cleanup the callback function to detect unknown commands. Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by:
-
Hans Verkuil authored
sparse found an unbalanced BKL usage. Signed-off-by:
-
Hermann Pitton authored
In opposite to the P7131 Dual this early OEM card has a male radio antenna connector and also no remote. We currently switch the DVB-T RF feed to the radio input, like on the P7131 with female radio connector used also for DVB-T and should improve this. Signed-off-by:
Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
-
