- 22 Sep, 2017 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - fix endpoint "end of test" interrupt issue (introduced in v4.14-rc1) (John Keeping) - fix MIPS use-after-free map_irq() issue (introduced in v4.14-rc1) (Lorenzo Pieralisi) * tag 'pci-v4.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: endpoint: Use correct "end of test" interrupt MIPS: PCI: Move map_irq() hooks out of initdata
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: - two Kconfig fixes to fix dependencies that cause compile failures when they are not fulfilled. - a section mismatch fix for Intel VT-d - a fix for PCI topology detection in ARM device-tree code * tag 'iommu-fixes-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/of: Remove PCI host bridge node check iommu/qcom: Depend on HAS_DMA to fix compile error iommu/vt-d: Fix harmless section mismatch warning iommu: Add missing dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull arch/tile fixes from Chris Metcalf: "These are a code cleanup and config cleanup, respectively" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: array underflow in setup_maxnodemem() tile: defconfig: Cleanup from old Kconfig options
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - #ifdef CONFIG_EFI around __efi_fpsimd_begin/end - Assembly code alignment reduced to 4 bytes from 16 - Ensure the kernel is compiled for LP64 (there are some arm64 compilers around defaulting to ILP32) - Fix arm_pmu_acpi memory leak on the error path * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf arm64: ensure the kernel is compiled for LP64 arm64: relax assembly code alignment from 16 byte to 4 byte arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernels
-
Tobias Klauser authored
Some architectures define the no-op macros/functions copy_segments, release_segments and forget_segments. These are used nowhere in the tree, so removed them. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Vineet Gupta <vgupta@synopsys.com> [for arch/arc] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "A fix for a missing __init annotation and two cleanup patches" * tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen, arm64: drop dummy lookup_address() xen: don't compile pv-specific parts if XEN_PV isn't configured xen: x86: mark xen_find_pt_base as __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "It turns out our single-fix pull from last week was too good to be true. I missed a few fixes in that pull that had already come in because I was on leave, but also we hadn't found the bugs yet. So this week it's a bit bigger, though not ridiculous. Hopefully things will settle down from here on. Four fixes for the new instruction emulation code. A fix for CPU offline on bare metal machines when certain idle states are not supported, and a fix for a device_node refcounting oops during CPU hotplug, caused by recent changes. Going to stable are a fix for an oops during core dump on machines that have TM (Transactional Memory) disabled. Reordering some EEH initialisation to avoid trashing memory, and another device_node refcounting fix. And a few other minor things. Thanks to: Anton Blanchard, Benjamin Herrenschmidt, Cyril Bur, Gautham R. Shenoy, Gustavo Romero, Kamalesh Babulal, Matthew Weber, Matt Weber, Naveen N. Rao, Nicholas Piggin, Pavithra Prakash, Ravi Bangoria, Ronak Desai, Scott Wood, Tyrel Datwyler" * tag 'powerpc-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix parent_dn reference leak in add_dt_node() powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPAR powerpc/eeh: Create PHB PEs after EEH is initialized powerpc/kprobes: Update optprobes to use emulate_update_regs() powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline powerpc/sstep: mullw should calculate a 64 bit signed result powerpc/sstep: Fix issues with mcrf powerpc/sstep: Fix issues with set_cr0() powerpc/tm: Flush TM only if CPU has TM feature powerpc/sysrq: Fix oops whem ppmu is not registered powerpc/configs: Update for CONFIG_SND changes powerpc/e6500: Update machine check for L1D cache err
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: - Fix a build error on MSP71xx which used to rely on somehow magically <asm/setup.h> being pulled in which no longer happens. - Fix the __write_64bit_c0_split inline assembler where there was the theoretical possibility of GCC interpret the constraints such that bad code could result. - A __init was causing section mismatch errors on Alchemy. Just to be on the safe side, Manuel's patch does away with all of them. - Fix perf event init. * '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: PCI: fix pcibios_map_irq section mismatch MIPS: Fix input modify in __write_64bit_c0_split() MIPS: MSP71xx: Include asm/setup.h MIPS: Fix perf event init
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: - A couple of bug fixes: memory management, perf, cio, dasd and scm_blk. - A larger change in regard to the CPU topology to improve performance for systems running under z/VM or KVM. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/topology: enable / disable topology dynamically s390/topology: alternative topology for topology-less machines s390/mm: fix write access check in gup_huge_pmd() s390/mm: make pmdp_invalidate() do invalidation only s390/cio: recover from bad paths s390/scm_blk: consistently use blk_status_t as error type s390/dasd: fix race during dasd initialization s390/perf: fix bug when creating per-thread event
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - Fix compiler warnings in inside-secure - Fix LS1021A support in caam - Avoid using RBP in x86 crypto code - Fix bug in talitos that prevents hashing with algif - Fix bugs talitos hashing code that cause incorrect hash result - Fix memory freeing path bug in drbg - Fix af_alg crash when two SG lists are chained * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: af_alg - update correct dst SGL entry crypto: caam - fix LS1021A support on ARMv7 multiplatform kernel crypto: inside-secure - fix gcc-4.9 warnings crypto: talitos - Don't provide setkey for non hmac hashing algs crypto: talitos - fix hashing crypto: talitos - fix sha224 crypto: x86/twofish - Fix RBP usage crypto: sha512-avx2 - Fix RBP usage crypto: x86/sha256-ssse3 - Fix RBP usage crypto: x86/sha256-avx2 - Fix RBP usage crypto: x86/sha256-avx - Fix RBP usage crypto: x86/sha1-ssse3 - Fix RBP usage crypto: x86/sha1-avx2 - Fix RBP usage crypto: x86/des3_ede - Fix RBP usage crypto: x86/cast6 - Fix RBP usage crypto: x86/cast5 - Fix RBP usage crypto: x86/camellia - Fix RBP usage crypto: x86/blowfish - Fix RBP usage crypto: drbg - fix freeing of resources
-
Arvind Yadav authored
Free memory region, if arm_pmu_acpi_probe is not successful. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Robin Murphy authored
of_pci_iommu_init() tries to be clever and stop its alias walk at the device represented by master_np, in case of weird PCI topologies where the bridge to the IOMMU and the rest of the system is not at the root. It turns out this is a bit short-sighted, since there are plenty of other callers of pci_for_each_dma_alias() which would also need the same behaviour in that situation, and the only platform so far with such a topology (Cavium ThunderX2) already solves it more generally via a PCI quirk. As this check is effectively redundant, and returning a boolean value as an int is a bit broken anyway, let's just get rid of it. Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Fixes: d87beb74 ("iommu/of: Handle PCI aliases properly") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A crash fix and corresponding regression test enabling for the crash scenario. The unit test for this crash is available in ndctl-v58.2. This branch has received a build success notification from the 0day-kbuild robot over 148 configs. The fix is tagged for -stable / backport to 4.13" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, namespace: fix btt claim class crash tools/testing/nvdimm: disable labels for nfit_test.1
-
- 21 Sep, 2017 13 commits
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: "Here are some early Kbuild fixes. The in-kernel firmware was removed during the previous merge window. Since then, some bug reports of broken rpm building are flying in ML. We need to fix it now. Summary: - remove firmware install from rpm-pkg / deb-pkg - fix mismatch between release number and UTS_VERSION for rpm-pkg" * tag 'kbuild-fixes-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rpm-pkg: fix version number handling kbuild: deb-pkg: remove firmware package support kbuild: rpm-pkg: delete firmware_install to fix build error
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc fixes from Al Viro: "A couple of regression fixes, one for this merge window, one for the previous cycle" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ipc/shm: Fix order of parameters when calling copy_compat_shmid_to_user iov_iter: fix page_copy_sane for compound pages
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull mtd fixes from Boris Brezillon: "SPI NOR: - Fix the SFDP parsing code (bugs reported by Geert Uytterhoeven) NAND: - Fix a resource leak in the lpc32xx_mlc driver - Fix a build warning in the core" * tag 'mtd/fixes-for-4.14-rc2' of git://git.infradead.org/linux-mtd: mtd: nand: remove unused blockmask variable mtd: nand: lpc32xx_mlc: Fix an error handling path in lpc32xx_nand_probe() mtd: spi-nor: fix DMA unsafe buffer issue in spi_nor_read_sfdp() mtd: spi-nor: Check consistency of the memory size extracted from the SFDP
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "amdkfd, i915 and exynos fixes. I've ended up on unplanned + planned leave this week, but there were some fixes I decided to dequeue, some amdkfd bits missed the next pull but they are pretty trivial, so I included them. I'm not sure I'll see much else for rc2, lots of people are at XDC" * tag 'drm-fixes-for-v4.14-rc2' of git://people.freedesktop.org/~airlied/linux: drm/exynos/hdmi: Fix unsafe list iteration drm: exynos: include linux/irq.h drm/exynos: Fix suspend/resume support drm/exynos: Fix locking in the suspend/resume paths drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos() drm/i915/cnp: set min brightness from VBT Revert "drm/i915/bxt: Disable device ready before shutdown command" drm/i915/bxt: set min brightness from VBT drm/i915: Fix an error handling in 'intel_framebuffer_init()' drm/i915/gvt: Fix incorrect PCI BARs reporting drm/amdkfd: pass queue's mqd when destroying mqd drm/amdkfd: remove memset before memcpy uapi linux/kfd_ioctl.h: only use __u32 and __u64
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma mapping fix from Christoph Hellwig: "A fix for a fix that went in this merge window from Arnd" * tag 'dma-mapping-4.14-2' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix rmem_dma_device_init regression
-
Manuel Lauss authored
Drop the __init from pcibios_map_irq() to make this section mis- match go away: WARNING: vmlinux.o(.text+0x56acd4): Section mismatch in reference from the function pcibios_scanbus() to the function .init.text:pcibios_map_irq() The function pcibios_scanbus() references the function __init pcibios_map_irq(). This is often because pcibios_scanbus lacks a __init annotation or the annotation of pcibios_map_irq is wrong. Run-Tested only on Alchemy. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17267/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
The inline asm in __write_64bit_c0_split() modifies the 64-bit input operand by shifting the high register left by 32, and constructing the full 64-bit value in the low register (even on a 32-bit kernel), so if that value is used again it could cause breakage as GCC would assume the registers haven't changed when they have. To quote the GCC extended asm documentation: > Warning: Do not modify the contents of input-only operands (except for > inputs tied to outputs). The compiler assumes that on exit from the > asm statement these operands contain the same values as they had > before executing the statement. Avoid modifying the input by using a temporary variable as an output which is modified instead of the input and not otherwise used. The asm is always __volatile__ so GCC shouldn't optimise it out. The low register of the temporary output is written before the high register of the input is read, so we have two constraint alternatives, one where both use the same registers (for when the input value isn't subsequently used), and one with an early clobber on the output in case the low output uses the same register as the high input. This allows the resulting assembly to remain mostly unchanged. A diff of a MIPS32r6 kernel reveals only three differences, two in relation to write_c0_r10k_diag() in cpu_probe() (register allocation rearranged slightly but otherwise identical), and one in relation to write_c0_cvmmemctl2() in kvm_vz_local_flush_guesttlb_all(), but the octeon CPU is only supported on 64-bit kernels where __write_64bit_c0_split() isn't used so that shouldn't matter in practice. So there currently doesn't appear to be anything broken by this bug. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17315/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Arnd Bergmann authored
msp71xx_defconfig can not be built at the in v4.14-rc1 arch/mips/pmcs-msp71xx/msp_smp.c:72:2: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration] I don't know what caused the regression, but including the right header is the obvious fix. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17309/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Tyrel Datwyler authored
A reference to the parent device node is held by add_dt_node() for the node to be added. If the call to dlpar_configure_connector() fails add_dt_node() returns ENOENT and that reference is not freed. Add a call to of_node_put(parent_dn) prior to bailing out after a failed dlpar_configure_connector() call. Fixes: 8d5ff320 ("powerpc/pseries: Make dlpar_configure_connector parent node aware") Cc: stable@vger.kernel.org # v3.12+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Tyrel Datwyler authored
Commit 215ee763 ("powerpc: pseries: remove dlpar_attach_node dependency on full path") reworked dlpar_attach_node() to no longer look up the parent node "/cpus", but instead to have the parent node passed by the caller in the function parameter list. As a result dlpar_attach_node() is no longer responsible for freeing the reference to the parent node. However, commit 215ee763 failed to remove the of_node_put(parent) call in dlpar_attach_node(), or to take into account that the reference to the parent in the caller dlpar_cpu_add() needs to be held until after dlpar_attach_node() returns. As a result doing repeated cpu add/remove dlpar operations will eventually result in the following error: OF: ERROR: Bad of_node_put() on /cpus CPU: 0 PID: 10896 Comm: drmgr Not tainted 4.13.0-autotest #1 Call Trace: dump_stack+0x15c/0x1f8 (unreliable) of_node_release+0x1a4/0x1c0 kobject_put+0x1a8/0x310 kobject_del+0xbc/0xf0 __of_detach_node_sysfs+0x144/0x210 of_detach_node+0xf0/0x180 dlpar_detach_node+0xc4/0x120 dlpar_cpu_remove+0x280/0x560 dlpar_cpu_release+0xbc/0x1b0 arch_cpu_release+0x6c/0xb0 cpu_release_store+0xa0/0x100 dev_attr_store+0x68/0xa0 sysfs_kf_write+0xa8/0xf0 kernfs_fop_write+0x2cc/0x400 __vfs_write+0x5c/0x340 vfs_write+0x1a8/0x3d0 SyS_write+0xa8/0x1a0 system_call+0x58/0x6c Fix the issue by removing the of_node_put(parent) call from dlpar_attach_node(), and ensuring that the reference to the parent node is properly held and released by the caller dlpar_cpu_add(). Fixes: 215ee763 ("powerpc: pseries: remove dlpar_attach_node dependency on full path") Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> [mpe: Add a comment in the code and frob the change log slightly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Benjamin Herrenschmidt authored
Otherwise we end up not yet having computed the right diag data size on powernv where EEH initialization is delayed, thus causing memory corruption later on when calling OPAL. Fixes: 5cb1f8fd ("powerpc/powernv/pci: Dynamically allocate PHB diag data") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Will Deacon authored
Commit 553f770e ("ipc: move compat shmctl to native") moved the compat IPC syscall handling into ipc/shm.c and refactored the struct accessors in the process. Unfortunately, the call to copy_compat_shmid_to_user when handling a compat {IPC,SHM}_STAT command gets the arguments the wrong way round, passing a kernel stack address as the user buffer (destination) and the user buffer as the kernel stack address (source). This patch fixes the parameter ordering so the buffers are accessed correctly. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Petar Penkov authored
Issue is that if the data crosses a page boundary inside a compound page, this check will incorrectly trigger a WARN_ON. To fix this, compute the order using the head of the compound page and adjust the offset to be relative to that head. Fixes: 72e809ed ("iov_iter: sanity checks for copy to/from page primitives") Signed-off-by: Petar Penkov <ppenkov@google.com> CC: Al Viro <viro@zeniv.linux.org.uk> CC: Eric Dumazet <edumazet@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 20 Sep, 2017 14 commits
-
-
Dave Airlie authored
Merge tag 'exynos-drm-fixes-for-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes - fix suspend/resume issues. - fix memory corruption detected by kasan. - fix build error on x86. * tag 'exynos-drm-fixes-for-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos/hdmi: Fix unsafe list iteration drm: exynos: include linux/irq.h drm/exynos: Fix suspend/resume support drm/exynos: Fix locking in the suspend/resume paths
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for 4.14-rc1 Couple fixes for stable: - Fix MIPI panels on BXT. - Fix PCI BARs information on GVT. Plus other fixes: - Fix minimal brightness for BXT, GLK, CFL and CNL. - Fix compilation warning: unused in_vbl - Fix error handling in intel_framebuffer_init * tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos() drm/i915/cnp: set min brightness from VBT Revert "drm/i915/bxt: Disable device ready before shutdown command" drm/i915/bxt: set min brightness from VBT drm/i915: Fix an error handling in 'intel_framebuffer_init()' drm/i915/gvt: Fix incorrect PCI BARs reporting
-
John Keeping authored
pci_epf_test_raise_irq() reads the interrupt to use for the response from reg->command, but this has been cleared at the beginning of the command handler so the value is always zero at this point. Instead, extract the interrupt index before handling the command and then pass the requested interrupt into pci_epf_test_raise_irq(). This allows us to remove the specific code to extract the interrupt for COMMAND_RAISE_MSI_IRQ since it is now handled in common code. Fixes: 3ecf3232 ("PCI: endpoint: Do not reset *command* inadvertently") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "This includes three minor fixes. - Have writing to trace file clear the irqsoff (and friends) tracer - trace_pipe behavior for instance buffers was different than top buffer - Show a message of why mmiotrace doesn't start from commandline" * tag 'trace-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix trace_pipe behavior for instance traces tracing: Ignore mmiotrace from kernel commandline tracing: Erase irqsoff trace with empty write
-
Masahiro Yamada authored
The "Release:" field of the spec file is determined based on the .version file. However, the .version file is not copied to the source tar file. So, when we build the kernel from the source package, the UTS_VERSION always indicates #1. This does not match with "rpm -q". The kernel UTS_VERSION and "rpm -q" do not agree for binrpm-pkg, either. Please note the kernel has already been built before the spec file is created. Currently, mkspec invokes mkversion. This script returns an incremented version. So, the "Release:" field of the spec file is greater than the version in the kernel by one. For the source package build (where .version file is missing), we can give KBUILD_BUILD_VERSION=%{release} to the build command. For the binary package build, we can simply read out the .version file because it contains the version number that was used for building the kernel image. We can remove scripts/mkversion because scripts/package/Makefile need not touch the .version file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Commit 5620a0d1 ("firmware: delete in-kernel firmware") deleted in-kernel firmware support, including the firmware install command. So, the firmware package does not make sense any more. Remove it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Riku Voipio <riku.voipio@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Yamada authored
Commit 5620a0d1 ("firmware: delete in-kernel firmware") deleted in-kernel firmware support, including "make firmware_install". Since then, "make rpm-pkg" / "make binrpm-pkg" fails to build with the error: make[2]: *** No rule to make target `firmware_install'. Stop. Commit df85b2d7 ("firmware: Restore support for built-in firmware") restored the build infrastructure for CONFIG_EXTRA_FIRMWARE, but this is out of the scope of "make firmware_install". So, the right thing to do is to kill the use of "make firmware_install". Fixes: 5620a0d1 ("firmware: delete in-kernel firmware") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiko Carstens authored
Add a new sysctl file /proc/sys/s390/topology which displays if topology is on (1) or off (0) as specified by the "topology=" kernel parameter. This allows to change topology information during runtime and configuring it via /etc/sysctl.conf instead of using the kernel line parameter. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
If running on machines that do not provide topology information we currently generate a "fake" topology which defines the maximum distance between each cpu: each cpu will be put into an own drawer. Historically this used to be the best option for (virtual) machines in overcommited hypervisors. For some workloads however it is better to generate a different topology where all cpus are siblings within a package (all cpus are core siblings). This shows performance improvements of up to 10%, depending on the workload. In order to keep the current behaviour, but also allow to switch to the different core sibling topology use the existing "topology=" kernel parameter: Specifying "topology=on" on machines without topology information will generate the core siblings (fake) topology information, instead of the default topology information where all cpus have the maximum distance. On machines which provide topology information specifying "topology=on" does not have any effect. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Naveen N. Rao authored
Optprobes depended on an updated regs->nip from analyse_instr() to identify the location to branch back from the optprobes trampoline. However, since commit 3cdfcbfd ("powerpc: Change analyse_instr so it doesn't modify *regs"), analyse_instr() doesn't update the registers anymore. Due to this, we end up branching back from the optprobes trampoline to the same branch into the trampoline resulting in a loop. Fix this by calling out to emulate_update_regs() before using the nip. Additionally, explicitly compare the return value from analyse_instr() to 1, rather than just checking for !0 so as to guard against any future changes to analyse_instr() that may result in -1 being returned in more scenarios. Fixes: 3cdfcbfd ("powerpc: Change analyse_instr so it doesn't modify *regs") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linuxMichael Ellerman authored
Merge one commit from Scott which I missed while away.
-
Stephan Mueller authored
When two adjacent TX SGL are processed and parts of both TX SGLs are pulled into the per-request TX SGL, the wrong per-request TX SGL entries were updated. This fixes a NULL pointer dereference when a cipher implementation walks the TX SGL where some of the SGL entries were NULL. Fixes: e870456d ("crypto: algif_skcipher - overhaul memory...") Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
When built using multi_v7_defconfig, driver does not work on LS1021A: [...] caam 1700000.crypto: can't identify CAAM ipg clk: -2 caam: probe of 1700000.crypto failed with error -2 [...] It turns out we have to detect at runtime whether driver is running on an i.MX platform or not. Cc: <stable@vger.kernel.org> Fixes: 6c3af955 ("crypto: caam - add support for LS1021A") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Arnd Bergmann authored
All older compiler versions up to gcc-4.9 produce these harmless warnings: drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces] drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces] This changes the syntax to something that works on all versions without warnings. Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-