This patch implements the AES key wrapping as specified in
NIST SP800-38F and RFC3394.

The implementation covers key wrapping without padding.

IV handling: The caller does not provide an IV for encryption,
but must obtain the IV after encryption which would serve as the first
semblock in the ciphertext structure defined by SP800-38F. Conversely,
for decryption, the caller must provide the first semiblock of the data
as the IV and the following blocks as ciphertext.

The key wrapping is an authenticated decryption operation. The caller
will receive EBADMSG during decryption if the authentication failed.

Albeit the standards define the key wrapping for AES only, the template
can be used with any other block cipher that has a block size of 16
bytes. During initialization of the template, that condition is checked.
Any cipher not having a block size of 16 bytes will cause the
initialization to fail.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The crypto drivers are supposed to update the IV passed to the crypto
request before calling the completion callback.
Test for the IV value before considering the test as successful.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit c6a97c42 ("hwrng: stm32 - add support for STM32 HW RNG")
was inadequately tested (actually it was tested quite hard so
incompetent would be a better description that inadequate) and does
not compile on platforms with CONFIG_PM set.

Fix this.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

On sparc, we see unaligned access messages on each modprobe[-r]:

Kernel unaligned access at TPC[6ad9b4] pkcs7_verify [..]
Kernel unaligned access at TPC[6a5484] crypto_shash_finup [..]
Kernel unaligned access at TPC[6a5390] crypto_shash_update [..]
Kernel unaligned access at TPC[10150308] sha1_sparc64_update [..]
Kernel unaligned access at TPC[101501ac] __sha1_sparc64_update [..]

These ware triggered by mod_verify_sig() invocations of pkcs_verify(), and
are are being caused by an unaligned desc at (sha1, digest_size is 0x14)
        desc = digest + digest_size;

To fix this, pkcs7_verify needs to make sure that desc is pointing
at an aligned value past the digest_size, and kzalloc appropriately,
taking alignment values into consideration.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using the devm_xxx() managed function to stripdown the error
and remove code.
In the same time, we replace request_mem_region/ioremap by the unified
devm_ioremap_resource() function.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using the devm_xxx() managed function to stripdown the error and remove
code.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The mxs-dcp driver relies on the stmp_reset_block() helper function, which
is provided by CONFIG_STMP_DEVICE. This symbol is always set on MXS,
but the driver can now also be built for MXC (i.MX6), which results
in a built error if no other driver selects STMP_DEVICE:

drivers/built-in.o: In function `mxs_dcp_probe':
vf610-ocotp.c:(.text+0x3df302): undefined reference to `stmp_reset_block'

This adds the 'select', like all other stmp drivers have it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a2712e6c ("crypto: mxs-dcp - Allow MXS_DCP to be used on MX6SL")
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

New bindings and driver have been created for STM32 series parts. This
patch integrates this changes.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for STMicroelectronics STM32 random number generator.

The config value defaults to N, reflecting the fact that STM32 is a
very low resource microcontroller platform and unlikely to be targeted
by any "grown up" defconfigs.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This adds documentation of device tree bindings for the STM32 hardware
random number generator.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As all the import functions and export functions are virtually
identical, factor out their common parts into a generic
mv_cesa_ahash_import() and mv_cesa_ahash_export() respectively.  This
performs the actual import or export, and we pass the data pointers and
length into these functions.

We have to switch a % const operation to do_div() in the common import
function to avoid provoking gcc to use the expensive 64-bit by 64-bit
modulus operation.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Attempting to use the sha1 digest for openssh via openssl reveals that
the result from the hash is wrong: this happens when we export the
state from one socket and import it into another via calling accept().

The reason for this is because the operation is reset to "initial block"
state, whereas we may be past the first fragment of data to be hashed.

Arrange for the operation code to avoid the initialisation of the state,
thereby preserving the imported state.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When a AF_ALG fd is accepted a second time (hence hash_accept() is
used), hash_accept_parent() allocates a new private context using
sock_kmalloc().  This context is uninitialised.  After use of the new
fd, we eventually end up with the kernel complaining:

marvell-cesa f1090000.crypto: dma_pool_free cesa_padding, c0627770/0 (bad dma)

where c0627770 is a random address.  Poisoning the memory allocated by
the above sock_kmalloc() produces kernel oopses within the marvell hash
code, particularly the interrupt handling.

The following simplfied call sequence occurs:

hash_accept()
  crypto_ahash_export()
    marvell hash export function
  af_alg_accept()
    hash_accept_parent()	<== allocates uninitialised struct hash_ctx
  crypto_ahash_import()
    marvell hash import function

hash_ctx contains the struct mv_cesa_ahash_req in its req.__ctx member,
and, as the marvell hash import function only partially initialises
this structure, we end up with a lot of members which are left with
whatever data was in memory prior to sock_kmalloc().

Add zero-initialisation of this structure.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electronc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Several of the algorithms in marvell/hash.c have a statesize of zero.
When an AF_ALG accept() on an already-accepted file descriptor to
calls into hash_accept(), this causes:

	char state[crypto_ahash_statesize(crypto_ahash_reqtfm(req))];

to be zero-sized, but we still pass this to:

	err = crypto_ahash_export(req, state);

which proceeds to write to 'state' as if it was a "struct md5_state",
"struct sha1_state" etc.  Add the necessary initialisers for the
.statesize member.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A new crypto driver for Marvell ARM platforms was added in
drivers/crypto/marvell/ as part of commit f63601fd ("crypto:
marvell/cesa - add a new driver for Marvell's CESA"). This commit adds
the relevant developers to the list of maintainers.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds CRC generation and validation support for nx-842.
Add CRC flag so that nx842 coprocessor includes CRC during compression
and validates during decompression.

Also changes in 842 SW compression to append CRC value at the end
of template and checks during decompression.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The clocksource does not provide clocksource_register() function since
f8935983 commit (clocksource: Mostly kill clocksource_register()), so
let's remove unnecessary information about this function from a comment.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Setkey function has been split into set_priv_key and set_pub_key.
Akcipher requests takes sgl for src and dst instead of void *.
Users of the API i.e. two existing RSA implementation and
test mgr code have been updated accordingly.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add mpi_read_raw_from_sgl and mpi_write_to_sgl helpers.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The original representation of FIFO size in the driver coupled with the
ambiguity in the documentation meant that it was easy to confuse readers.
This lead to a false positive BUG-find and subsequently time wastage
debugging this phantom issue.

Hopefully this patch can prevent future readers from falling into the
same trap.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Samples are documented to be available every 0.667us, so in theory
the 8 sample deep FIFO should take 5.336us to fill.  However, during
thorough testing, it became apparent that filling the FIFO actually
takes closer to 12us.

Also take into consideration that udelay() can behave oddly i.e. not
delay for as long as requested.

  Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>:

    "IIRC, Linus recommends a x2 factor on delays, especially
     timeouts generated by these functions.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

DT nodes should not append their addresses with '0x'.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

clk_prepare_enable() can fail so add a check for this and
return the error code if it fails.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for AES working in XEX-based Tweaked-codebook mode with
ciphertext Stealing (XTS)

sector index - HW limitation: CAAM device supports sector index of only
8 bytes to be used for sector index inside IV, instead of whole 16 bytes
received on request. This represents 2 ^ 64 = 16,777,216 Tera of possible
values for sector index.
Signed-off-by: Cristian Hristea <cristi.hristea@gmail.com>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Catalin Vasile <catalin.vasile@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The qce driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing qce_mapsg, qce_unmapsg and qce_countsg functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The convention is to use the name of the module in the driver structures
that are used for registering the device. The CCP module is currently
using a descriptive name. Replace the descriptive name with module name.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The CCP is meant to be more of an offload engine than an accelerator
engine. To avoid any confusion, change references to accelerator to
offload.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

With the creation of the device_dma_is_coherent API the "use_acpi" field
is no longer needed, so remove it.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace the usage of BUG_ON with WARN_ON and return an error.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unneeded variable val_indx.
Issue found by a static analyzer.
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for ctr and xts encryption modes.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following sparse warnings:

 crypto/skcipher.c:94:5:
 warning: symbol 'crypto_init_skcipher_ops_blkcipher'
 was not declared. Should it be static?

 crypto/skcipher.c:185:5:
 warning: symbol 'crypto_init_skcipher_ops_ablkcipher'
 was not declared. Should it be static?
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

No authenc() ciphers are FIPS approved, nor is ecb(des).
After the end of 2015, ansi_cprng will also be non-approved.
Signed-off-by: John Haxby <john.haxby@oracle.com>
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sahara driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing the sahara_sha_unmap_sg function.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The caam driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing dma_map_sg_chained, dma_unmap_sg_chained
and __sg_count functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The talitos driver use two dma_map_sg path
according to SG are chained or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing talitos_map_sg, talitos_unmap_sg_chain
and sg_count functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some code cleanups after crypto API changes:
- Change qat_algs_unregister to a void function to keep it consistent
  with qat_asym_algs_unregister.
- Remove empty functions qat_algs_init & qat_algs_exit.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Module crc32c-intel uses a special read-only data section named .rotata.
This section is defined for K_table, and its name seems to be a spelling
mistake for .rodata.

Fixes: 473946e6 ("crypto: crc32c-pclmul - Shrink K_table to 32-bit words")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sahara_sg_length function of the sahara driver is the same
as sg_nents_for_len from lib/scatterlist.c
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The get_sg_count function of amcc is the same as sg_nents_for_len from
lib/scatterlist.c
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>