- 14 Jan, 2011 40 commits
-
-
Andrea Arcangeli authored
Some are needed to build but not actually used on archs not supporting transparent hugepages. Others like pmdp_clear_flush are used by x86 too. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrea Arcangeli authored
These returns 0 at compile time when the config option is disabled, to allow gcc to eliminate the transparent hugepage function calls at compile time without additional #ifdefs (only the export of those functions have to be visible to gcc but they won't be required at link time and huge_memory.o can be not built at all). _PAGE_BIT_UNUSED1 is never used for pmd, only on pte. Signed-off-by:
-
Andrea Arcangeli authored
Add config option. Signed-off-by:
-
Andrea Arcangeli authored
Warn destroy_compound_page that __split_huge_page_refcount is heavily dependent on its internal behavior. Signed-off-by:
-
Andrea Arcangeli authored
huge_memory.c needs it too when it fallbacks in copying hugepages into regular fragmented pages if hugepage allocation fails during COW. Signed-off-by:
-
Andrea Arcangeli authored
No paravirt version of set_pmd_at/pmd_update/pmd_update_defer. Signed-off-by:
-
Andrea Arcangeli authored
Paravirt ops pmd_update/pmd_update_defer/pmd_set_at. Not all might be necessary (vmware needs pmd_update, Xen needs set_pmd_at, nobody needs pmd_update_defer), but this is to keep full simmetry with pte paravirt ops, which looks cleaner and simpler from a common code POV. Signed-off-by:
-
Andrea Arcangeli authored
Used by paravirt and not paravirt set_pmd_at. Signed-off-by:
-
Andrea Arcangeli authored
Clear compound mapping for anonymous compound pages like it already happens for regular anonymous pages. But crash if mapping is set for any tail page, also the PageAnon check is meaningless for tail pages. This check only makes sense for the head page, for tail page it can only hide bugs and we definitely don't want to hide bugs. Signed-off-by:
-
Andrea Arcangeli authored
Futex code is smarter than most other gup_fast O_DIRECT code and knows about the compound internals. However now doing a put_page(head_page) will not release the pin on the tail page taken by gup-fast, leading to all sort of refcounting bugchecks. Getting a stable head_page is a little tricky. page_head = page is there because if this is not a tail page it's also the page_head. Only in case this is a tail page, compound_head is called, otherwise it's guaranteed unnecessary. And if it's a tail page compound_head has to run atomically inside irq disabled section __get_user_pages_fast before returning. Otherwise ->first_page won't be a stable pointer. Disableing irq before __get_user_page_fast and releasing irq after running compound_head is needed because if __get_user_page_fast returns == 1, it means the huge pmd is established and cannot go away from under us. pmdp_splitting_flush_notify in __split_huge_page_splitting will have to wait for local_irq_enable before the IPI delivery can return. This means __split_huge_page_refcount can't be running from under us, and in turn when we run compound_head(page) we're not reading a dangling pointer from tailpage->first_page. Then after we get to stable head page, we are always safe to call compound_lock and after taking the compound lock on head page we can finally re-check if the page returned by gup-fast is still a tail page. in which case we're set and we didn't need to split the hugepage in order to take a futex on it. Signed-off-by:
-
Andrea Arcangeli authored
After releasing the compound_lock split_huge_page can still run and release the page before put_page_testzero runs. Signed-off-by:
-
Andrea Arcangeli authored
Alter compound get_page/put_page to keep references on subpages too, in order to allow __split_huge_page_refcount to split an hugepage even while subpages have been pinned by one of the get_user_pages() variants. Signed-off-by:
-
Andrea Arcangeli authored
Add a new compound_lock() needed to serialize put_page against __split_huge_page_refcount(). Signed-off-by:
-
Andrea Arcangeli authored
Define MADV_HUGEPAGE. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Andrea Arcangeli authored
Documentation/vm/transhuge.txt Signed-off-by:
-
Andrea Arcangeli authored
page_count shows the count of the head page, but the actual check is done on the tail page, so show what is really being checked. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Hugh Dickins authored
When a swapcache page is replaced by a ksm page, it's best to free that swap immediately. Reported-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Minchan Kim authored
I think determine_dirtyable_memory() is a rather costly function since it need many atomic reads for gathering zone/global page state. But when we use vm_dirty_bytes && dirty_background_bytes, we don't need that costly calculation. This patch eliminates such unnecessary overhead. NOTE : newly added if condition might add overhead in normal path. But it should be _really_ small because anyway we need the access both vm_dirty_bytes and dirty_background_bytes so it is likely to hit the cache. [akpm@linux-foundation.org: fix used-uninitialised warning] Signed-off-by:Minchan Kim <minchan.kim@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Volodymyr G. Lukiianyk authored
When numa_zonelist_order parameter is set to "node" or "zone" on the command line it's still showing as "default" in sysctl. That's because early_param parsing function changes only user_zonelist_order variable. Fix this by copying user-provided string to numa_zonelist_order if it was successfully parsed. Signed-off-by:
Volodymyr G Lukiianyk <volodymyrgl@gmail.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Mel Gorman authored
When kswapd is woken up for a high-order allocation, it takes account of the highest usable zone by the caller (the classzone idx). During allocation, this index is used to select the lowmem_reserve[] that should be applied to the watermark calculation in zone_watermark_ok(). When balancing a node, kswapd considers the highest unbalanced zone to be the classzone index. This will always be at least be the callers classzone_idx and can be higher. However, sleeping_prematurely() always considers the lowest zone (e.g. ZONE_DMA) to be the classzone index. This means that sleeping_prematurely() can consider a zone to be balanced that is unusable by the allocation request that originally woke kswapd. This patch changes sleeping_prematurely() to use a classzone_idx matching the value it used in balance_pgdat(). Signed-off-by:
Eric B Munson <emunson@mgebm.net> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Simon Kirby <sim@hostway.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by:
-
Mel Gorman authored
After DEF_PRIORITY, balance_pgdat() considers all_unreclaimable zones to be balanced but sleeping_prematurely does not. This can force kswapd to stay awake longer than it should. This patch fixes it. Signed-off-by:
-
Mel Gorman authored
When kswapd wakes up, it reads its order and classzone from pgdat and calls balance_pgdat. While its awake, it potentially reclaimes at a high order and a low classzone index. This might have been a once-off that was not required by subsequent callers. However, because the pgdat values were not reset, they remain artifically high while balance_pgdat() is running and potentially kswapd enters a second unnecessary reclaim cycle. Reset the pgdat order and classzone index after reading. Signed-off-by:
-
Mel Gorman authored
Before kswapd goes to sleep, it uses sleeping_prematurely() to check if there was a race pushing a zone below its watermark. If the race happened, it stays awake. However, balance_pgdat() can decide to reclaim at order-0 if it decides that high-order reclaim is not working as expected. This information is not passed back to sleeping_prematurely(). The impact is that kswapd remains awake reclaiming pages long after it should have gone to sleep. This patch passes the adjusted order to sleeping_prematurely and uses the same logic as balance_pgdat to decide if it's ok to go to sleep. Signed-off-by:
-
Mel Gorman authored
When reclaiming for high-orders, kswapd is responsible for balancing a node but it should not reclaim excessively. It avoids excessive reclaim by considering if any zone in a node is balanced then the node is balanced. In the cases where there are imbalanced zone sizes (e.g. ZONE_DMA with both ZONE_DMA32 and ZONE_NORMAL), kswapd can go to sleep prematurely as just one small zone was balanced. This alters the sleep logic of kswapd slightly. It counts the number of pages that make up the balanced zones. If the total number of balanced pages is more than a quarter of the zone, kswapd will go back to sleep. This should keep a node balanced without reclaiming an excessive number of pages. Signed-off-by:
-
Mel Gorman authored
Simon Kirby reported the following problem We're seeing cases on a number of servers where cache never fully grows to use all available memory. Sometimes we see servers with 4 GB of memory that never seem to have less than 1.5 GB free, even with a constantly-active VM. In some cases, these servers also swap out while this happens, even though they are constantly reading the working set into memory. We have been seeing this happening for a long time; I don't think it's anything recent, and it still happens on 2.6.36. After some debugging work by Simon, Dave Hansen and others, the prevaling theory became that kswapd is reclaiming order-3 pages requested by SLUB too aggressive about it. There are two apparent problems here. On the target machine, there is a small Normal zone in comparison to DMA32. As kswapd tries to balance all zones, it would continually try reclaiming for Normal even though DMA32 was balanced enough for callers. The second problem is that sleeping_prematurely() does not use the same logic as balance_pgdat() when deciding whether to sleep or not. This keeps kswapd artifically awake. A number of tests were run and the figures from previous postings will look very different for a few reasons. One, the old figures were forcing my network card to use GFP_ATOMIC in attempt to replicate Simon's problem. Second, I previous specified slub_min_order=3 again in an attempt to reproduce Simon's problem. In this posting, I'm depending on Simon to say whether his problem is fixed or not and these figures are to show the impact to the ordinary cases. Finally, the "vmscan" figures are taken from /proc/vmstat instead of the tracepoints. There is less information but recording is less disruptive. The first test of relevance was postmark with a process running in the background reading a large amount of anonymous memory in blocks. The objective was to vaguely simulate what was happening on Simon's machine and it's memory intensive enough to have kswapd awake. POSTMARK traceonly kanyzone Transactions per second: 156.00 ( 0.00%) 153.00 (-1.96%) Data megabytes read per second: 21.51 ( 0.00%) 21.52 ( 0.05%) Data megabytes written per second: 29.28 ( 0.00%) 29.11 (-0.58%) Files created alone per second: 250.00 ( 0.00%) 416.00 (39.90%) Files create/transact per second: 79.00 ( 0.00%) 76.00 (-3.95%) Files deleted alone per second: 520.00 ( 0.00%) 420.00 (-23.81%) Files delete/transact per second: 79.00 ( 0.00%) 76.00 (-3.95%) MMTests Statistics: duration User/Sys Time Running Test (seconds) 16.58 17.4 Total Elapsed Time (seconds) 218.48 222.47 VMstat Reclaim Statistics: vmscan Direct reclaims 0 4 Direct reclaim pages scanned 0 203 Direct reclaim pages reclaimed 0 184 Kswapd pages scanned 326631 322018 Kswapd pages reclaimed 312632 309784 Kswapd low wmark quickly 1 4 Kswapd high wmark quickly 122 475 Kswapd skip congestion_wait 1 0 Pages activated 700040 705317 Pages deactivated 212113 203922 Pages written 9875 6363 Total pages scanned 326631 322221 Total pages reclaimed 312632 309968 %age total pages scanned/reclaimed 95.71% 96.20% %age total pages scanned/written 3.02% 1.97% proc vmstat: Faults Major Faults 300 254 Minor Faults 645183 660284 Page ins 493588 486704 Page outs 4960088 4986704 Swap ins 1230 661 Swap outs 9869 6355 Performance is mildly affected because kswapd is no longer doing as much work and the background memory consumer process is getting in the way. Note that kswapd scanned and reclaimed fewer pages as it's less aggressive and overall fewer pages were scanned and reclaimed. Swap in/out is particularly reduced again reflecting kswapd throwing out fewer pages. The slight performance impact is unfortunate here but it looks like a direct result of kswapd being less aggressive. As the bug report is about too many pages being freed by kswapd, it may have to be accepted for now. The second test is a streaming IO benchmark that was previously used by Johannes to show regressions in page reclaim. MICRO traceonly kanyzone User/Sys Time Running Test (seconds) 29.29 28.87 Total Elapsed Time (seconds) 492.18 488.79 VMstat Reclaim Statistics: vmscan Direct reclaims 2128 1460 Direct reclaim pages scanned 2284822 1496067 Direct reclaim pages reclaimed 148919 110937 Kswapd pages scanned 15450014 16202876 Kswapd pages reclaimed 8503697 8537897 Kswapd low wmark quickly 3100 3397 Kswapd high wmark quickly 1860 7243 Kswapd skip congestion_wait 708 801 Pages activated 9635 9573 Pages deactivated 1432 1271 Pages written 223 1130 Total pages scanned 17734836 17698943 Total pages reclaimed 8652616 8648834 %age total pages scanned/reclaimed 48.79% 48.87% %age total pages scanned/written 0.00% 0.01% proc vmstat: Faults Major Faults 165 221 Minor Faults 9655785 9656506 Page ins 3880 7228 Page outs 37692940 37480076 Swap ins 0 69 Swap outs 19 15 Again fewer pages are scanned and reclaimed as expected and this time the test completed faster. Note that kswapd is hitting its watermarks faster (low and high wmark quickly) which I expect is due to kswapd reclaiming fewer pages. I also ran fs-mark, iozone and sysbench but there is nothing interesting to report in the figures. Performance is not significantly changed and the reclaim statistics look reasonable. Tgis patch: When the allocator enters its slow path, kswapd is woken up to balance the node. It continues working until all zones within the node are balanced. For order-0 allocations, this makes perfect sense but for higher orders it can have unintended side-effects. If the zone sizes are imbalanced, kswapd may reclaim heavily within a smaller zone discarding an excessive number of pages. The user-visible behaviour is that kswapd is awake and reclaiming even though plenty of pages are free from a suitable zone. This patch alters the "balance" logic for high-order reclaim allowing kswapd to stop if any suitable zone becomes balanced to reduce the number of pages it reclaims from other zones. kswapd still tries to ensure that order-0 watermarks for all zones are met before sleeping. Signed-off-by: -
Steven Rostedt authored
Running the annotated branch profiler on a box doing average work (firefox, evolution, xchat, distcc farm), the likely() used in grab_cache_page_write_begin() was incorrect most of the time: correct incorrect % Function File Line ------- --------- - -------- ---- ---- 1924262 71332401 97 grab_cache_page_write_begin filemap.c 2206 Adding a trace_printk() and running the function tracer limited to just this function I can see: gconfd-2-2696 [000] 4467.268935: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=7 gconfd-2-2696 [000] 4467.268946: grab_cache_page_write_begin <-ext3_write_begin gconfd-2-2696 [000] 4467.268947: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=8 gconfd-2-2696 [000] 4467.268959: grab_cache_page_write_begin <-ext3_write_begin gconfd-2-2696 [000] 4467.268960: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=9 gconfd-2-2696 [000] 4467.268972: grab_cache_page_write_begin <-ext3_write_begin gconfd-2-2696 [000] 4467.268973: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=10 gconfd-2-2696 [000] 4467.268991: grab_cache_page_write_begin <-ext3_write_begin gconfd-2-2696 [000] 4467.268992: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=11 gconfd-2-2696 [000] 4467.269005: grab_cache_page_write_begin <-ext3_write_begin Which shows that a lot of calls from ext3_write_begin will result in the page returned by "find_lock_page" will be NULL. Signed-off-by:Steven Rostedt <rostedt@goodmis.org> Acked-by:
Nick Piggin <npiggin@kernel.dk> Signed-off-by:
-
Steven Rostedt authored
page_mapping() has a unlikely that the mapping has PAGE_MAPPING_ANON set. But running the annotated branch profiler on a normal desktop system doing vairous tasks (xchat, evolution, firefox, distcc), it is not really that unlikely that the mapping here will have the PAGE_MAPPING_ANON flag set: correct incorrect % Function File Line ------- --------- - -------- ---- ---- 35935762 1270265395 97 page_mapping mm.h 659 1306198001 143659 0 page_mapping mm.h 657 203131478 121586 0 page_mapping mm.h 657 5415491 1116 0 page_mapping mm.h 657 74899487 1116 0 page_mapping mm.h 657 203132845 224 0 page_mapping mm.h 659 5415464 27 0 page_mapping mm.h 659 13552 0 0 page_mapping mm.h 657 13552 0 0 page_mapping mm.h 659 242630 0 0 page_mapping mm.h 657 242630 0 0 page_mapping mm.h 659 74899487 0 0 page_mapping mm.h 659 The page_mapping() is a static inline, which is why it shows up multiple times. The unlikely in page_mapping() was correct a total of 1909540379 times and incorrect 1270533123 times, with a 39% being incorrect. With this much of an error, it's best to simply remove the unlikely and have the compiler and branch prediction figure this out. Signed-off-by:
-
Steven Rostedt authored
The mapping_unevictable() has a likely() around the mapping parameter. This mapping parameter comes from page_mapping() which has an unlikely() that the page will be set as PAGE_MAPPING_ANON, and if so, it will return NULL. One would think that this unlikely() means that the mapping returned by page_mapping() would not be NULL, but where page_mapping() is used just above mapping_unevictable(), that unlikely() is incorrect most of the time. This means that the "likely(mapping)" in mapping_unevictable() is incorrect most of the time. Running the annotated branch profiler on my main box which runs firefox, evolution, xchat and is part of my distcc farm, I had this: correct incorrect % Function File Line ------- --------- - -------- ---- ---- 12872836 1269443893 98 mapping_unevictable pagemap.h 51 35935762 1270265395 97 page_mapping mm.h 659 1306198001 143659 0 page_mapping mm.h 657 203131478 121586 0 page_mapping mm.h 657 5415491 1116 0 page_mapping mm.h 657 74899487 1116 0 page_mapping mm.h 657 203132845 224 0 page_mapping mm.h 659 5415464 27 0 page_mapping mm.h 659 13552 0 0 page_mapping mm.h 657 13552 0 0 page_mapping mm.h 659 242630 0 0 page_mapping mm.h 657 242630 0 0 page_mapping mm.h 659 74899487 0 0 page_mapping mm.h 659 The page_mapping() is a static inline, which is why it shows up multiple times. The mapping_unevictable() is also a static inline but seems to be used only once in my setup. The unlikely in page_mapping() was correct a total of 1909540379 times and incorrect 1270533123 times, with a 39% being incorrect. Perhaps this is enough to remove the unlikely from page_mapping() as well. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
-
KOSAKI Motohiro authored
Today, tasklist_lock in migrate_pages doesn't protect anything. rcu_read_lock() provide enough protection from pid hash walk. Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
-
Michel Lespinasse authored
__get_user_pages gets a new 'nonblocking' parameter to signal that the caller is prepared to re-acquire mmap_sem and retry the operation if needed. This is used to split off long operations if they are going to block on a disk transfer, or when we detect contention on the mmap_sem. [akpm@linux-foundation.org: remove ref to rwsem_is_contended()] Signed-off-by:
Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Michel Lespinasse authored
Use a single code path for faulting in pages during mlock. The reason to have it in this patch series is that I did not want to update both code paths in a later change that releases mmap_sem when blocking on disk. Signed-off-by:
-
Michel Lespinasse authored
Move the code to mlock pages from __mlock_vma_pages_range() to follow_page(). This allows __mlock_vma_pages_range() to not have to break down work into 16-page batches. An additional motivation for doing this within the present patch series is that it'll make it easier for a later chagne to drop mmap_sem when blocking on disk (we'd like to be able to resume at the page that was read from disk instead of at the start of a 16-page batch). Signed-off-by:
-
Michel Lespinasse authored
Currently mlock() holds mmap_sem in exclusive mode while the pages get faulted in. In the case of a large mlock, this can potentially take a very long time, during which various commands such as 'ps auxw' will block. This makes sysadmins unhappy: real 14m36.232s user 0m0.003s sys 0m0.015s (output from 'time ps auxw' while a 20GB file was being mlocked without being previously preloaded into page cache) I propose that mlock() could release mmap_sem after the VM_LOCKED bits have been set in all appropriate VMAs. Then a second pass could be done to actually mlock the pages, in small batches, releasing mmap_sem when we block on disk access or when we detect some contention. This patch: Before this change, mlock() holds mmap_sem in exclusive mode while the pages get faulted in. In the case of a large mlock, this can potentially take a very long time. Various things will block while mmap_sem is held, including 'ps auxw'. This can make sysadmins angry. I propose that mlock() could release mmap_sem after the VM_LOCKED bits have been set in all appropriate VMAs. Then a second pass could be done to actually mlock the pages with mmap_sem held for reads only. We need to recheck the vma flags after we re-acquire mmap_sem, but this is easy. In the case where a vma has been munlocked before mlock completes, pages that were already marked as PageMlocked() are handled by the munlock() call, and mlock() is careful to not mark new page batches as PageMlocked() after the munlock() call has cleared the VM_LOCKED vma flags. So, the end result will be identical to what'd happen if munlock() had executed after the mlock() call. In a later change, I will allow the second pass to release mmap_sem when blocking on disk accesses or when it is otherwise contended, so that it won't be held for long periods of time even in shared mode. Signed-off-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Michel Lespinasse authored
When faulting in pages for mlock(), we want to break COW for anonymous or file pages within VM_WRITABLE, non-VM_SHARED vmas. However, there is no need to write-fault into VM_SHARED vmas since shared file pages can be mlocked first and dirtied later, when/if they actually get written to. Skipping the write fault is desirable, as we don't want to unnecessarily cause these pages to be dirtied and queued for writeback. Signed-off-by:
-
Michel Lespinasse authored
Reorganize the code so that dirty pages are handled closer to the place that makes them dirty (handling write fault into shared, writable VMAs). No behavior changes. Signed-off-by:
-
Michel Lespinasse authored
mlocking a shared, writable vma currently causes the corresponding pages to be marked as dirty and queued for writeback. This seems rather unnecessary given that the pages are not being actually modified during mlock. It is understood that for non-shared mappings (file or anon) we want to use a write fault in order to break COW, but there is just no such need for shared mappings. The first two patches in this series do not introduce any behavior change. The intent there is to make it obvious that dirtying file pages is only done in the (writable, shared) case. I think this clarifies the code, but I wouldn't mind dropping these two patches if there is no consensus about them. The last patch is where we actually avoid dirtying shared mappings during mlock. Note that as a side effect of this, we won't call page_mkwrite() for the mappings that define it, and won't be pre-allocating data blocks at the FS level if the mapped file was sparsely allocated. My understanding is that mlock does not need to provide such guarantee, as evidenced by the fact that it never did for the filesystems that don't define page_mkwrite() - including some common ones like ext3. However, I would like to gather feedback on this from filesystem people as a precaution. If this turns out to be a showstopper, maybe block preallocation can be added back on using a different interface. Large shared mlocks are getting significantly (>2x) faster in my tests, as the disk can be fully used for reading the file instead of having to share between this and writeback. This patch: Reorganize the code to remove the 'reuse' flag. No behavior changes. Signed-off-by:
-
Rik van Riel authored
Temporary IO failures, eg. due to loss of both multipath paths, can permanently leave the PageError bit set on a page, resulting in msync or fsync returning -EIO over and over again, even if IO is now getting to the disk correctly. We already clear the AS_ENOSPC and AS_IO bits in mapping->flags in the filemap_fdatawait_range function. Also clearing the PageError bit on the page allows subsequent msync or fsync calls on this file to return without an error, if the subsequent IO succeeds. Unfortunately data written out in the msync or fsync call that returned -EIO can still get lost, because the page dirty bit appears to not get restored on IO error. However, the alternative could be potentially all of memory filling up with uncleanable dirty pages, hanging the system, so there is no nice choice here... Signed-off-by:
Valerie Aurora <vaurora@redhat.com> Acked-by:
Jeff Layton <jlayton@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Mandeep Singh Baines authored
We'd like to be able to oom_score_adj a process up/down as it enters/leaves the foreground. Currently, it is not possible to oom_adj down without CAP_SYS_RESOURCE. This patch allows a task to decrease its oom_score_adj back to the value that a CAP_SYS_RESOURCE thread set it to or its inherited value at fork. Assuming the thread that has forked it has oom_score_adj of 0, each process could decrease it back from 0 upon activation unless a CAP_SYS_RESOURCE thread elevated it to something higher. Alternative considered: * a setuid binary * a daemon with CAP_SYS_RESOURCE Since you don't wan't all processes to be able to reduce their oom_adj, a setuid or daemon implementation would be complex. The alternatives also have much higher overhead. This patch updated from original patch based on feedback from David Rientjes. Signed-off-by:
Mandeep Singh Baines <msb@chromium.org> Acked-by:
David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ying Han <yinghan@google.com> Signed-off-by:
-
David Rientjes authored
Four architectures (arm, mips, sparc, x86) use __vmalloc_area() for module_init(). Much of the code is duplicated and can be generalized in a globally accessible function, __vmalloc_node_range(). __vmalloc_node() now calls into __vmalloc_node_range() with a range of [VMALLOC_START, VMALLOC_END) for functionally equivalent behavior. Each architecture may then use __vmalloc_node_range() directly to remove the duplication of code. Signed-off-by:
-
