- 04 Jun, 2015 15 commits
-
-
Hariprasad Shenai authored
Remove ethtool get/set support for wake on lan, adapter doesn't support it. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Add support in ethtool to dump loopback port statistics Signed-off-by:
-
Hariprasad Shenai authored
Add support in ethtool to dump adapter channel stats Signed-off-by:
-
Hariprasad Shenai authored
Add ethtool support to get adapter specific hardware statistics Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== pull request: batman-adv 20150603 here you have our second batch of patches intended for net-next. In this patchset you won't find any new features, but quite some code cleanup work, a bunch of code style fixes and also comments corrections by Markus Pargmann. Moreover you have a patch from Sven Eckelmann removing an unnecessary NULL check in batadv_iv_ogm_update_seqnos(). Please pull or let me know of any problem! ==================== Signed-off-by: -
Rasmus Villemoes authored
Currently, two of the branches are dead code, since an earlier smaller substring would have been found ("TP" in the "TP_NW" case and either of "BNC" and "AUI" in the "BNC_AUI" case). Rearrange the strstr() calls so that the longer strings are searched for first. Signed-off-by:Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-06-03 This series contains updates to e1000e only. Yanir provides 8 fixes and 1 version bump for e1000e. First fix resolves a possible unit hang if multiple descriptors are available in the rings during reset or runtime suspend. Fixed a warning on SPARC compile based on a suggested solution from Alex Duyck. Fixed a logical error, where a "if" condition under which a flush should occur, was revered. Fixed a hardware issue that prevented i219 from working in legacy interrupts mode. Fixed the hardware clock configuration and suprious non-linear increment. Lastly, fixed a system hang which occurred during execution of "ethtool -t <NIC>", by disabling MULR for the loopback test to avoid the hand state. ==================== Signed-off-by: -
Alexei Starovoitov authored
Allow eBPF programs attached to classifier/actions to call bpf_clone_redirect(skb, ifindex, flags) helper which will mirror or redirect the packet by dynamic ifindex selection from within the program to a target device either at ingress or at egress. Can be used for various scenarios, for example, to load balance skbs into veths, split parts of the traffic to local taps, etc. Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Carol Soto authored
fix typo in mlx4_set_vf_mac Acked-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
-
Carol Soto authored
If mlx4_enable_sriov is called by adapter without this feature MLX4_DEV_CAP_FLAG2_SYS_EQS then during this path the function alloc icm is called twice without freeing the structures from the first time. Acked-by:
-
Carol L Soto authored
If user loads mlx4_core with num_vfs greater than supported then variable dev->dev_vfs is freed 2 times after unloading the driver. Acked-by:
-
David Malcolm authored
This code in drivers/net/ethernet/dec/tulip/uli526x.c function "uli526x_timer": 1086 } else 1087 if ((tmp_cr12 & 0x3) && db->link_failed) { [...snip...] 1109 } 1110 else if(!(tmp_cr12 & 0x3) && db->link_failed) 1111 { [...snip...] 1117 } 1118 db->init=0; is misleadingly indented: the db->init=0 is indented as if part of the else clause at line 1086, but it is independent of it (no braces before the "if" at line 1087). This patch fixes the indentation to reflect the actual meaning of the code, though is it actually meant to be part of the "else" clause? (I'm a compiler developer, not a kernel person). It also adds spaces around the assignment, to placate checkpatch.pl. Seen via an experimental new gcc warning I'm working on for gcc 6, -Wmisleading-indentation, using gcc r223098 adding -Werror=misleading-indentation to KBUILD_CFLAGS in Makefile. The experimental GCC emits this warning (as an error), rightly IMHO: drivers/net/ethernet/dec/tulip/uli526x.c: In function ‘uli526x_timer’: drivers/net/ethernet/dec/tulip/uli526x.c:1118:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] db->init=0; ^ drivers/net/ethernet/dec/tulip/uli526x.c:1086:4: note: ...this ‘else’ clause, but it is not } else ^ Hope this is helpful Dave Signed-off-by:David Malcolm <dmalcolm@redhat.com> Signed-off-by:
-
Dan Murphy authored
Add support for the TI dp83867 Gigabit ethernet phy device. The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Antonio Murdaca authored
use the time_after_eq macro for jiffies comparison operation Signed-off-by:
Antonio Murdaca <antonio.murdaca@gmail.com> Signed-off-by:
-
Or Gerlitz authored
When CONFIG_RFS_ACCEL or SMP aren't set, we fail to build, fix it. Also, avoid build warning as of unused function on that setup. Fixes: c66fa19c ('net/mlx4: Add EQ pool') Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
- 03 Jun, 2015 21 commits
-
-
Markus Pargmann authored
Remove ret variable and all jumps. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch>
-
Markus Pargmann authored
We can avoid this indirect return variable by directly returning the error values. Signed-off-by:
-
Markus Pargmann authored
Declare the returntype of batadv_compare_eth as bool. The function called inside this helper function (ether_addr_equal_unaligned) also uses bool as return value, so there is no need to return int. Signed-off-by:
-
Markus Pargmann authored
It is much clearer to see a bool type as return value than 'int' for functions that are supposed to return true or false. Signed-off-by:
-
Sven Eckelmann authored
orig_ifinfo is dereferenced multiple times in batadv_iv_ogm_update_seqnos before the check for NULL is done. The function also exists at the beginning when orig_ifinfo would have been NULL. This makes the check at the end unnecessary and only confuses the reader/code analyzers. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Markus Pargmann authored
batadv_orig_bat_iv->bcast_own is actually not a bitfield, it is an array. Adjust the comment accordingly. Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Yanir Lubetkin authored
Bump the version to reflect the driver changes and bug fixes for i219. Also update the copyright, while we are at it. Signed-off-by:
Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yanir Lubetkin authored
System would hang during execution of "ethtool -t <NIC>" for the same reason that required flushing the descriptor rings. This fix disables MULR for the loopback test to avoid the hang state. Signed-off-by:
-
Yanir Lubetkin authored
Two issues involving systim were reported. 1. Clock is not running in the correct frequency 2. In some situations, systim values were not incremented linearly This patch fixes the hardware clock configuration and the spurious non-linear increment. Signed-off-by:
-
Yanir Lubetkin authored
This fix handles a hardware issue that prevented i219 from working in legacy interrupts mode (IntMode=0) Signed-off-by:
-
Yanir Lubetkin authored
The indication that a descriptor ring flush is required was read from FEXTNVM7 by mistake. It should be read from the PCI config space. Signed-off-by:
-
Yanir Lubetkin authored
The condition under which the flush should occur was reversed. The fix should be applied before any HW reset (unless followed by bus reset) and before any power state transition from D0. If E1000_FEXTNVM7_NEED_DESCRING_FLUSH bit is set in FEXTNVM7 and TDLEN > 0 the Tx ring should be flushed. (fixes ~95% of the hang states). If the E1000_FEXTNVM7_NEED_DESCRING_FLUSH did not clear, we should also flush the RX ring. Bug was caught by Alexander Duyck during a code review when examining this fix. Signed-off-by:
-
Yanir Lubetkin authored
Fixes a warning that was reported by Yanjiang Jin <yanjiang.jin@windriver.com> by implementing the solution suggested by Alexander Duyck <alexander.h.duyck@redhat.com>. Signed-off-by:
-
Yanir Lubetkin authored
After testing various cases, the conclusion is that the fix MUST be executed BEFORE any event that the HW is reset or transition to D3. To fix that I moved the execution to the relevant places but per Alexander Duyck's review, ensure now that the DMA is valid and was not freed before manipulating the ring. Signed-off-by:
-
Yanir Lubetkin authored
Unit hang may occur if multiple descriptors are available in the rings during reset or runtime suspend. This state can be detected by testing bit 8 in the FEXTNVM7 register. If this bit is set and there are pending descriptors in one of the rings, we must flush them prior to reset. Same applies entering runtime suspend. Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Markus Pargmann authored
This is a small copy paste fix for batadv_ing_buffer_avg. Signed-off-by:
-
Markus Pargmann authored
The kernel coding style says, that there should not be multiple assignments in one row. Signed-off-by:
-
Markus Pargmann authored
Signed-off-by:
-
Markus Pargmann authored
CodingStyle describes that either none or both branches of a conditional have to have brackets. Signed-off-by:
-
Markus Pargmann authored
Signed-off-by:
-
Markus Pargmann authored
It is just a bit easier to put the error handling at one place and let multiple error paths use the same calls. Signed-off-by:
-
- 02 Jun, 2015 4 commits
-
-
David S. Miller authored
Shradha Shah says: ==================== sfc: ndo_get_phys_port_id, vadaptor stats and PF unload when Vf's assigned to guest This is the third and last instalment of SRIOV for EF10 patches. This patch set includes implementation of ndo_get_phys_port_id and changes to the MAC statistics code in order to support vadaptor statistics. It also includes code to deal with PF unload when Vf's are still assigned to the guest. The first couple of patches create sysfs files for physical port and link control flags which are particularly useful when we have enabled a large number of VF's. These patches have been tested with and without CONFIG_SFC_SRIOV. The creation and content of the sysfs files has been tested. The statistics are tested using ethtool for monitoring. ==================== Signed-off-by: -
Daniel Pieczko authored
If any VF is assigned as the PF is unloaded, do not attempt to remove its vport or the vswitch. These will be removed if the driver binds to the PF again, as an entity reset occurs during probe. A 'force' flag is added to efx_ef10_pci_sriov_disable() to distinguish between disabling SR-IOV and driver unload. SR-IOV cannot be disabled if VFs are assigned to guests. If the PF driver is unloaded while VFs are assigned, the driver may try to bind to the VF again at a later point if the driver has been reloaded and the VF returns to the same domain as the PF. In this case, the PF will not have a VF data structure, so the VF can check this and drop out of probe early. In this case, efx->vf_count will be zero but VFs will be present. The user is advised to remove the VF and re-create it. The check at the beginning of efx_ef10_pci_sriov_disable() that efx->vf_count is non-zero is removed to allow SR-IOV to be disabled in this case. Also, if the PF driver is unloaded, it will disable SR-IOV to remove these unknown VFs. By not disabling bus-mastering if VFs are still assigned, the VF will continue to pass traffic after the PF has been removed. When using the max_vfs module parameter, if VFs are already present do not try to initialise any more. Signed-off-by:
Shradha Shah <sshah@solarflare.com> Signed-off-by:
-
Daniel Pieczko authored
When the driver unloads, force the unbind and removal of any VFs in the host with the PF. The PF cannot remove vports and vswitches if they are still being used by a VF driver, and when unloading the sfc driver the removal order is not guaranteed, so the instruction from the PF to the VF to unbind enforces a suitable ordering so that vswitches and vports can be removed. As a result of this, manually unbinding the driver from a single PF will result in all of its VFs in the host also being removed. Signed-off-by:
-
Daniel Pieczko authored
Signed-off-by:
-
