- 20 Feb, 2017 1 commit
-
-
Bart Van Assche authored
If a target driver (e.g. tcm_qla2xxx) calls transport_generic_request_failure() to report that receiving data has failed and that SCSI command has already been aborted by the initiator, ensure that the SCSI status ABORTED is sent back to the initiator instead of the sense code provided by the target driver. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- 19 Feb, 2017 9 commits
-
-
Dmitry V. Levin authored
Consistently use types from linux/types.h to fix the following linux/target_core_user.h userspace compilation errors: /usr/include/linux/target_core_user.h:108:4: error: unknown type name 'uint32_t' uint32_t iov_cnt; /usr/include/linux/target_core_user.h:109:4: error: unknown type name 'uint32_t' uint32_t iov_bidi_cnt; /usr/include/linux/target_core_user.h:110:4: error: unknown type name 'uint32_t' uint32_t iov_dif_cnt; /usr/include/linux/target_core_user.h:111:4: error: unknown type name 'uint64_t' uint64_t cdb_off; /usr/include/linux/target_core_user.h:112:4: error: unknown type name 'uint64_t' uint64_t __pad1; /usr/include/linux/target_core_user.h:113:4: error: unknown type name 'uint64_t' uint64_t __pad2; /usr/include/linux/target_core_user.h:117:4: error: unknown type name 'uint8_t' uint8_t scsi_status; /usr/include/linux/target_core_user.h:118:4: error: unknown type name 'uint8_t' uint8_t __pad1; /usr/include/linux/target_core_user.h:119:4: error: unknown type name 'uint16_t' uint16_t __pad2; /usr/include/linux/target_core_user.h:120:4: error: unknown type name 'uint32_t' uint32_t __pad3; Signed-off-by:Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
-
Mike Christie authored
I think the transport statistics device file was supposed to show scsiTransportProtocolType. It instead shows the fabric name which is normally closer to the driver name. I was thinking I cannot change from fabric name to protocol type name incase people are expecting the driver name, so this patch adds another file proto_id that exports the SCSI protocol identifier ID. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Quinn Tran authored
Fix the following warning reported by the "smatch" static checker: drivers/scsi/qla2xxx/qla_init.c:3910 qla2x00_alloc_fcport() warn: use 'flags' here instead of GFP_XXX? Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Varun Prakash authored
In case of unsolicited data for the first sequence seq_end_offset must be set to minimum of total data length and FirstBurstLength, so do not add cmd->write_data_done to the min of total data length and FirstBurstLength. This patch avoids that with ImmediateData=Yes, InitialR2T=No, MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command with IO size above FirstBurstLength triggers sequence error messages, for example Set following parameters on target (linux-4.8.12) ImmediateData = Yes InitialR2T = No MaxXmitDataSegmentLength = 8k FirstBurstLength = 64k Log in from Open iSCSI initiator and execute dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct Error messages on target Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside of Sequence 73728:131072 while DataSequenceInOrder=Yes. Command ITT: 0x00000035, received DataSN: 0x00000001 higher than expected 0x00000000. Unable to perform within-command recovery while ERL=0. Signed-off-by:
Varun Prakash <varun@chelsio.com> [ bvanassche: Use min() instead of open-coding it / edited patch description ] Signed-off-by:
-
Varun Prakash authored
Chelsio T6 adapters reduce number of completion to host by generating single completion for all directly placed(DDP) iSCSI pdus in a sequence, completion contains iSCSI hdr of the last pdu in a sequence. On receiving DDP completion cxgbit driver finds iSCSI cmd using iscsit_find_cmd_from_itt_or_dump(), then updates cmd->write_data_done, cmd->next_burst_len, cmd->data_sn and calls __iscsit_check_dataout_hdr() to validate iSCSI hdr. (Update __iscsit_check_dataout_hdr parameter usage - nab) Signed-off-by:
-
Varun Prakash authored
Enable DDP for T6 only if DataSequenceInOrder=YES and DataPDUInOrder=YES to ensure inorder delivery of iSCSI pdus. Signed-off-by:
-
Varun Prakash authored
Signed-off-by:
-
Varun Prakash authored
cxgb4_tp_smt_idx() returns smt idx for T4,T5,T6 adapters. Signed-off-by:
-
Varun Prakash authored
Split iscsit_check_dataout_hdr() into two functions 1. __iscsit_check_dataout_hdr() - This function validates data out hdr. 2. iscsit_check_dataout_hdr() - This function finds iSCSI cmd using iscsit_find_cmd_from_itt_or_dump(), then it calls __iscsit_check_dataout_hdr() to validate iSCSI hdr. This split is required to support Chelsio T6 iSCSI DDP completion feature. T6 adapters reduce number of completions to host by generating single completion for all directly placed(DDP) iSCSI pdus in a sequence, DDP completion contains iSCSI hdr of the last pdu in a sequence. On receiving DDP completion cxgbit driver will first find iSCSI cmd using iscsit_find_cmd_from_itt_or_dump() then updates cmd->write_data_done, cmd->next_burst_len, cmd->data_sn and calls __iscsit_check_dataout_hdr() to validate iSCSI hdr. (Move XRDSL check ahead of itt lookup / dump - nab) Signed-off-by:
-
- 09 Feb, 2017 30 commits
-
-
Bart Van Assche authored
The code that tests the CMD_T_DEV_ACTIVE flag has been removed. Hence also remove the flag itself. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Andy Grover <agrover@redhat.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Bart Van Assche authored
The patch that reworks task management function handling guarantees that target_remove_from_state_list() is always called with CMD_T_BUSY cleared. Since that function is the only function that tests that flag this means that that flag is now superfluous. Hence remove that flag. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
The function transport_cmd_check_stop() has two callers. These callers invoke this function as follows: * transport_cmd_check_stop(cmd, true, false) * transport_cmd_check_stop(cmd, false, true) Hence inline this function into its callers. This patch does not change any functionality but improves source code readability. Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Bart Van Assche authored
Enabling dynamic debug for the target_core_mod kernel module causes the system log to be spammed with the "Incremented ..." message. Hence remove it. Signed-off-by:
-
Bart Van Assche authored
Stop execution if CMD_T_STOP has been set for a command just after the command has been added to the device command list and before .write_pending() is called. The following sequence can trigger this: - transport_handle_cdb_direct() gets called. This function namely sets CMD_T_ACTIVE before it calls transport_generic_new_cmd(). - __transport_wait_for_tasks() is called concurrently. This function sets CMD_T_STOP for all active commands that have not been aborted. Signed-off-by:
-
Bart Van Assche authored
transport_wait_for_tasks() not only waits for command completion but also sets CMD_T_STOP. Additionally, this function is not only called by frontend drivers but also by the target core. Update the transport_wait_for_tasks() documentation to reflect this. Signed-off-by:
-
Bart Van Assche authored
It is possible that two commands with the same tag are present on sess_cmd_list because commands are removed from sess_cmd_list after a response has been sent to the initiator. Hence continue searching through sess_cmd_list even if a matching tag has already been found. Signed-off-by:
-
Bart Van Assche authored
Member tmr_lun of se_tmr_req is set but not used. Hence remove it. Signed-off-by:
-
Bart Van Assche authored
Allocate a task management request structure for all task management requests, including task reassignment. This change avoids that the se_tmr->response assignment dereferences an uninitialized se_tmr pointer. Reported-by:
Moshe David <mdavid@infinidat.com> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Fix the spelling of this word in a function name, messages and source code comments. Signed-off-by:
-
Bart Van Assche authored
Change two occurrences of "preform" into "perform". Signed-off-by:
-
Bart Van Assche authored
This patch avoids that smatch complains about inconsistent indentation in iscsi_target_start_negotiation(). Signed-off-by:
-
Bart Van Assche authored
This was detected by building with W=1. Signed-off-by:
-
Varun Prakash authored
For T6 adapters use T6 specific macro to set the force bit. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but avoids that sparse complains about endianness. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but avoids that sparse complains about using variable-length arrays. Signed-off-by:
-
Joe Carnuccio authored
This patch simplifies SRB structure usage in driver. - Simplify sp->done() and sp->free() interfaces. - Remove sp->fcport->vha to use vha pointer from sp. - Use sp->vha context in qla2x00_rel_sp(). Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Quinn Tran authored
Current code blindly does State Change Registration when the link is up. Move SCR behind fabric scan, so that arbitrated loop scan would not get erroneous error message. Some of the other improvements are as follows - Add session deletion for TPRLO and send acknowledgment for TPRLO. - Enable FW option to move ABTS, RIDA & PUREX from RSPQ to ATIOQ. - Save NPort ID early in link init. - Move ABTS & RIDA to ATIOQ helps in keeping command ordering and link up sequence ordering. - Save Nport ID and update VP map so that SCSI CMD/ATIO won't be dropped. - fcport alloc does the initializes memory to zero. Remove memset to zero since It might corrupt link list. - Turn off Registration for State Change MB in loop mode. Signed-off-by:
-
Himanshu Madhani authored
With support for dual mode in the driver, this mode becomes dead code. Remove reverse_ini_mode from code. Signed-off-by:
-
Quinn Tran authored
Add switch to allow both Initiator Mode & Target mode to operate at the same time. Signed-off-by:
-
Quinn Tran authored
Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by:
-
Quinn Tran authored
Current code merges qla_tgt_sess and fc_port structure into single fc_port structure representing same I-T nexus. Signed-off-by:
-
Quinn Tran authored
Updated code with d_id from s_id for better readability and clarity. Signed-off-by:
-
Quinn Tran authored
Callback for sp->done expects scsi_qla_host is passed in as argument, Instead qla_hw_data is passed in. Signed-off-by:
-
Himanshu Madhani authored
During initial implementation, tape support was included but not enabled by default on target. So far, we don't see any target customer requesting this support. Since this code is not being used actively, we want to remove it and we will add back if there are any request in future for SRR support. Signed-off-by:
Giridhar Malavali <giridhar.malavali@cavium.com> Reviewed-by:
-
Quinn Tran authored
Trace flags are useful during debugging crash dumps using crash utility. These trace flags makes it easier to understand various states a command has successfully completed. Signed-off-by:
-
Quinn Tran authored
Move code code which converts Task Mgmt Command flags for ATIO to TCM #defines, from qla2xxx driver to tcm_qla2xxx driver. Signed-off-by:
-
Quinn Tran authored
Signed-off-by:
-
