- 30 Jan, 2020 6 commits
-
-
Tom Zanussi authored
Add a function to get an event file and prevent it from going away on module or instance removal. trace_get_event_file() will find an event file in a given instance (if instance is NULL, it assumes the top trace array) and return it, pinning the instance's trace array as well as the event's module, if applicable, so they won't go away while in use. trace_put_event_file() does the matching release. Link: http://lkml.kernel.org/r/bb31ac4bdda168d5ed3c4b5f5a4c8f633e8d9118.1580323897.git.zanussi@kernel.orgAcked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Tom Zanussi <zanussi@kernel.org> [ Moved trace_array_put() to end of trace_put_event_file() ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Tom Zanussi authored
Add a new trace_array_find() function that can be used to find a trace array given the instance name, and replace existing code that does the same thing with it. Also add trace_array_find_get() which does the same but returns the trace array after upping its refcount. Also make both available for use outside of trace.c. Link: http://lkml.kernel.org/r/cb68528c975eba95bee4561ac67dd1499423b2e5.1580323897.git.zanussi@kernel.orgAcked-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Without patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist # Available triggers: # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 6+1 records in 6+1 records out 206 bytes copied, 0.00027916 s, 738 kB/s Notice the printing of "# Available triggers:..." after the line. With the patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 2+1 records in 2+1 records out 88 bytes copied, 0.000526867 s, 167 kB/s It only prints the end of the file, and does not restart. Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.com https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Link: http://lkml.kernel.org/r/7ad85b22-1866-977c-db17-88ac438bc764@virtuozzo.comSigned-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Without patch: # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset id no pid 2+1 records in 2+1 records out 10 bytes copied, 0.000213285 s, 46.9 kB/s Notice the "id" followed by "no pid". With the patch: # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset id 0+1 records in 0+1 records out 3 bytes copied, 0.000202112 s, 14.8 kB/s Notice that it only prints "id" and not the "no pid" afterward. Link: http://lkml.kernel.org/r/4f87c6ad-f114-30bb-8506-c32274ce2992@virtuozzo.com https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Mathieu Desnoyers authored
Reading the sched_cmdline_ref and sched_tgid_ref initial state within tracing_start_sched_switch without holding the sched_register_mutex is racy against concurrent updates, which can lead to tracepoint probes being registered more than once (and thus trigger warnings within tracepoint.c). [ May be the fix for this bug ] Link: https://lore.kernel.org/r/000000000000ab6f84056c786b93@google.com Link: http://lkml.kernel.org/r/20190817141208.15226-1-mathieu.desnoyers@efficios.com Cc: stable@vger.kernel.org CC: Steven Rostedt (VMware) <rostedt@goodmis.org> CC: Joel Fernandes (Google) <joel@joelfernandes.org> CC: Peter Zijlstra <peterz@infradead.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Paul E. McKenney <paulmck@linux.ibm.com> Reported-by: syzbot+774fddf07b7ab29a1e55@syzkaller.appspotmail.com Fixes: d914ba37 ("tracing: Add support for recording tgid of tasks") Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
- 29 Jan, 2020 7 commits
-
-
Masami Hiramatsu authored
Move external function declarations into kernel/trace/trace.h from trace_boot.c for tracing subsystem internal use. Link: http://lkml.kernel.org/r/158029060405.12381.11944554430359702545.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Include some required (but currently indirectly included) headers and sort it alphabetically. Link: http://lkml.kernel.org/r/158029059514.12381.6597832266860248781.stgit@devnote2Signed-off-by:
-
Tom Zanussi authored
Add a testcase ensuring that the tracing error_log correctly displays hist trigger parsing errors. Link: http://lkml.kernel.org/r/62ec58d9aca661cde46ba678e32a938427945e9e.1561743018.git.zanussi@kernel.orgReviewed-by:
-
Tom Zanussi authored
The 'hist:' prefix gets stripped from the command text during command processing, but should be added back when displaying the command during error processing. Not only because it's what should be displayed but also because not having it means the test cases fail because the caret is miscalculated by the length of the prefix string. Link: http://lkml.kernel.org/r/449df721f560042e22382f67574bcc5b4d830d3d.1561743018.git.zanussi@kernel.orgReviewed-by:
-
Tom Zanussi authored
Add error codes and messages for all the error paths leading to sort specification parsing errors. Link: http://lkml.kernel.org/r/237830dc05e583fbb53664d817a784297bf961be.1561743018.git.zanussi@kernel.orgReviewed-by:
-
Tom Zanussi authored
In the process of adding better error messages for sorting, I realized that strsep was being used incorrectly and some of the error paths I was expecting to be hit weren't and just fell through to the common invalid key error case. It also became obvious that for keyword assignments, it wasn't necessary to save the full assignment and reparse it later, and having a common empty-assignment check would also make more sense in terms of error processing. Change the code to fix these problems and simplify it for new error message changes in a subsequent patch. Link: http://lkml.kernel.org/r/1c3ef0b6655deaf345f6faee2584a0298ac2d743.1561743018.git.zanussi@kernel.org Fixes: e62347d2 ("tracing: Add hist trigger support for user-defined sorting ('sort=' param)") Fixes: 7ef224d1 ("tracing: Add 'hist' event trigger command") Fixes: a4072fe8 ("tracing: Add a clock attribute for hist triggers") Reported-by:
-
Mauro Carvalho Chehab authored
Sphinx warnings about his: Documentation/trace/kprobetrace.rst:68: WARNING: undefined label: user_mem_access (if the link has no caption the label must precede a section header) The problem is quite simple: Sphinx wants a blank line after references. Link: http://lkml.kernel.org/r/a83ea390bc28784518fce772b4c961ea1c976f14.1560883872.git.mchehab+samsung@kernel.orgAcked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
- 25 Jan, 2020 2 commits
-
-
Steven Rostedt (VMware) authored
As warnings can trigger panics, especially when "panic_on_warn" is set, memory failure warnings can cause panics and fail fuzz testers that are stressing memory. Create a MEM_FAIL() macro to use instead of WARN() in the tracing code (perhaps this should be a kernel wide macro?), and use that for memory failure issues. This should stop failing fuzz tests due to warnings. Link: https://lore.kernel.org/r/CACT4Y+ZP-7np20GVRu3p+eZys9GPtbu+JpfV+HtsufAzvTgJrg@mail.gmail.comSuggested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
The trace_array_get_by_name() creates a ftrace instance and trace_array_put() is used to remove the reference. Even though the trace_array_get_by_name() creates the instance, it also adds a reference count to it, that prevents user space from removing it. As the bootconfig just creates the instance on boot up, it should still be used where it can be deleted by user space after boot. A trace_array_put() is required to let that happen. Also, change the documentation on trace_array_get_by_name() to make this not be so confusing. Link: https://lore.kernel.org/r/20200124205927.76128804@rorschach.local.home Fixes: 4f712a4d ("tracing/boot: Add instance node support") Acked-by:
-
- 24 Jan, 2020 5 commits
-
-
Hou Pengyang authored
commit f42c85e7 moved tracepoint's ftrace creation into include/trace/ftrace.h and trace/define_trace.h was deleted as a result. However some comment info does not adapt to the change, which is such a misguiding when reading related code. This patch fix this by moving trace/trace_events.h to <trace/events/XXX.h>, since tracepoint headers have already been moved to tarce/events/. Link: http://lkml.kernel.org/r/1425419298-61941-1-git-send-email-houpengyang@huawei.comSigned-off-by:
Hou Pengyang <houpengyang@huawei.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Dan Carpenter authored
We checked "iter->trace" earlier so there is no need to check here. Link: http://lkml.kernel.org/r/20141122183012.GB6994@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Josef Bacik authored
I noticed when trying to use the trace-cmd python interface that reading the raw buffer wasn't working for kernel_stack events. This is because it uses a stubbed version of __dynamic_array that doesn't do the __data_loc trick and encode the length of the array into the field. Instead it just shows up as a size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES since this is what we actually do in practice and matches how user_stack_trace works. Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.comSigned-off-by:
Josef Bacik <jbacik@fb.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Luis Henriques authored
tracing_stat_init() was always returning '0', even on the error paths. It now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails to created the 'trace_stat' debugfs directory. Link: http://lkml.kernel.org/r/1410299381-20108-1-git-send-email-luis.henriques@canonical.com Fixes: ed6f1c99 ("tracing: Check return value of tracing_init_dentry()") Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Steven Rostedt (VMware) authored
Looking through old emails in my INBOX, I came across a patch from Luis Henriques that attempted to fix a race of two stat tracers registering the same stat trace (extremely unlikely, as this is done in the kernel, and probably doesn't even exist). The submitted patch wasn't quite right as it needed to deal with clean up a bit better (if two stat tracers were the same, it would have the same files). But to make the code cleaner, all we needed to do is to keep the all_stat_sessions_mutex held for most of the registering function. Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@canonical.com Fixes: 002bb86d ("tracing/ftrace: separate events tracing and stats tracing engine") Reported-by:
-
- 22 Jan, 2020 2 commits
-
-
Alex Shi authored
This limitation are never lunched from introduce commit 970988e1 ("tracing/kprobe: Add kprobe_event= boot parameter") Could we remove it if no intention to implement it? Link: http://lkml.kernel.org/r/1579586075-45132-1-git-send-email-alex.shi@linux.alibaba.comAcked-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
If we exit due to a bad input to trace_printk() (highly unlikely), then the buffer variable will not be initialized when we unnest the ring buffer. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 21 Jan, 2020 9 commits
-
-
Dan Carpenter authored
The trace_array_get_by_name() function doesn't return error pointers, it returns NULL on error. Link: http://lkml.kernel.org/r/20200117053007.5h2juv272pokqhtq@kili.mountain Fixes: 4f712a4d ("tracing/boot: Add instance node support") Acked-by:
-
Alex Shi authored
This macro isn't used from commit 3a161d99 ("tracing: Create seq_buf layer in trace_seq"). so no needs to keep it. Link: http://lkml.kernel.org/r/1579586086-45543-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
This macro isn't used since commit d325c402 ("ring-buffer: Remove unused function ring_buffer_page_len()"), so better to remove it. Link: http://lkml.kernel.org/r/1579586080-45300-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Colin Ian King authored
There are two spelling mistakes in printf statements, fix these. Link: http://lkml.kernel.org/r/20200116092206.52192-1-colin.king@canonical.comAcked-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Masami Hiramatsu authored
Fix typos in boottime-trace.rst according to Randy's suggestions. Link: http://lkml.kernel.org/r/157949060335.25888.13153184562531693684.stgit@devnote2Suggested-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
-
Masami Hiramatsu authored
Fix typos in bootconfig.rst according to Randy's suggestions. Link: http://lkml.kernel.org/r/157949059219.25888.16939971423610233631.stgit@devnote2Suggested-by:
-
Masami Hiramatsu authored
Fix Kconfig help message since the bootconfig file is only available to be appended to initramfs. And also add a reference to the documentation. Link: http://lkml.kernel.org/r/157949058031.25888.18399447161895787505.stgit@devnote2Reported-by:
-
Alex Shi authored
This macro isn't used from commit cb7be3b2 ("ftrace: remove daemon"). So no needs to keep it. Link: http://lkml.kernel.org/r/1579586063-44984-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
These 2 macros aren't used from commit eee8ded1 ("ftrace: Have the function probes call their own function"), so remove them. Link: http://lkml.kernel.org/r/1579585807-43316-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
- 16 Jan, 2020 1 commit
-
-
Steven Rostedt (VMware) authored
trace_printk() is used to debug the kernel which includes the tracing infrastructure. But because it writes to the ring buffer, and so does much of the tracing infrastructure, the ring buffer's recursive detection will drop writes to the ring buffer that is in the same context as the current write is happening (it allows interrupts to write when normal context is writing, but wont let normal context write while normal context is writing). This can cause confusion and think that the code is where the trace_printk() exists is not hit. To solve this, up the recursive nesting of the ring buffer when trace_printk() is called before it writes to the buffer itself. Note, this does make it dangerous to use trace_printk() in the ring buffer code itself, because this basically disables the recursion protection of trace_printk() buffer writes. But as trace_printk() is only used for debugging, and if this does occur, the developer will see the cause real quick (recursive blowing up of the stack). Thus the developer can deal with that. But having trace_printk() silently ignored is a much bigger problem, and disabling recursive protection is a small price to pay to fix it. Signed-off-by:
-
- 14 Jan, 2020 2 commits
-
-
Steven Rostedt (VMware) authored
rb_update_event has changed without the kernel-doc update. Signed-off-by: -
Fabian Frederick authored
Also fixes a couple of typos Link: http://lkml.kernel.org/r/1401992525-10417-1-git-send-email-fabf@skynet.be Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Fabian Frederick <fabf@skynet.be> [ Found this deep in the abyss of my INBOX ] Signed-off-by:
-
- 13 Jan, 2020 6 commits
-
-
Masami Hiramatsu authored
With CONFIG_PROVE_RCU_LIST, I had many suspicious RCU warnings when I ran ftracetest trigger testcases. ----- # dmesg -c > /dev/null # ./ftracetest test.d/trigger ... # dmesg | grep "RCU-list traversed" | cut -f 2 -d ] | cut -f 2 -d " " kernel/trace/trace_events_hist.c:6070 kernel/trace/trace_events_hist.c:1760 kernel/trace/trace_events_hist.c:5911 kernel/trace/trace_events_trigger.c:504 kernel/trace/trace_events_hist.c:1810 kernel/trace/trace_events_hist.c:3158 kernel/trace/trace_events_hist.c:3105 kernel/trace/trace_events_hist.c:5518 kernel/trace/trace_events_hist.c:5998 kernel/trace/trace_events_hist.c:6019 kernel/trace/trace_events_hist.c:6044 kernel/trace/trace_events_trigger.c:1500 kernel/trace/trace_events_trigger.c:1540 kernel/trace/trace_events_trigger.c:539 kernel/trace/trace_events_trigger.c:584 ----- I investigated those warnings and found that the RCU-list traversals in event trigger and hist didn't need to use RCU version because those were called only under event_mutex. I also checked other RCU-list traversals related to event trigger list, and found that most of them were called from event_hist_trigger_func() or hist_unregister_trigger() or register/unregister functions except for a few cases. Replace these unneeded RCU-list traversals with normal list traversal macro and lockdep_assert_held() to check the event_mutex is held. Link: http://lkml.kernel.org/r/157680910305.11685.15110237954275915782.stgit@devnote2Reviewed-by:
-
Masami Hiramatsu authored
Add a documentation about boot-time tracing options in boot config. Link: http://lkml.kernel.org/r/157867246028.17873.8047384554383977870.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add below function-tracer filter options to boot-time tracing. - ftrace.[instance.INSTANCE.]ftrace.filters This will take an array of tracing function filter rules - ftrace.[instance.INSTANCE.]ftrace.notraces This will take an array of NON-tracing function filter rules Link: http://lkml.kernel.org/r/157867244841.17873.10933616628243103561.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add ftrace.cpumask option support to boot-time tracing. This sets cpumask for each instance. - ftrace.[instance.INSTANCE.]cpumask = CPUMASK; Set the trace cpumask. Note that the CPUMASK should be a string which <tracefs>/tracing_cpumask can accepts. Link: http://lkml.kernel.org/r/157867243625.17873.13613922641273149372.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add instance node support to boot-time tracing. User can set some options and event nodes under instance node. - ftrace.instance.INSTANCE[...] Add new INSTANCE instance. Some options and event nodes are acceptable for instance node. Link: http://lkml.kernel.org/r/157867242413.17873.9814204526141500278.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add synthetic event node support to boot time tracing. The synthetic event is a kind of event node, but the group name is "synthetic". - ftrace.event.synthetic.EVENT.fields = FIELD[, FIELD2...] Defines new synthetic event with FIELDs. Each field should be "type varname". The synthetic node requires "fields" string arraies, which defines the fields as same as tracing/synth_events interface. Link: http://lkml.kernel.org/r/157867241236.17873.12411615143321557709.stgit@devnote2Signed-off-by:
-
