- 01 Feb, 2008 40 commits
-
-
Eric Paris authored
Currently audit drops the audit type when an audit message goes through printk instead of the audit deamon. This is a minor annoyance in that the audit type is no longer part of the message and the information the audit type conveys needs to be carried in, or derived from the message data. The attached patch includes the type number as part of the printk. Admittedly it isn't the type name that the audit deamon provides but I think this is better than dropping the type completely. Signed-pff-by: John Johansen <jjohansen@suse.de> Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
If we fail to get an ab in audit_log_pid_context this may be due to an exclude rule rather than a memory allocation failure. If it was due to a memory allocation failue we would have already paniced and no need to do it again. Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
This patch adds an end of event record type. It will be sent by the kernel as the last record when a multi-record event is triggered. This will aid realtime analysis programs since they will now reliably know they have the last record to complete an event. The audit daemon filters this and will not write it to disk. Signed-off-by: Steve Grubb <sgrubb redhat com> Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
In order to correlate audit records to an individual login add a session id. This is incremented every time a user logs in and is included in almost all messages which currently output the auid. The field is labeled ses= or oses= Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
Add uid, loginuid, and comm collection to OBJ_PID records. This just gives users a little more information about the task that received a signal. pid is rather meaningless after the fact, and even though comm isn't great we can't collect exe reasonably on this code path for performance reasons. Signed-off-by: Eric Paris <eparis@redhat.com>
-
Eric Paris authored
The syscall exit code will change ERESTART* kernel internal return codes to EINTR if it does not restart the syscall. Since we collect the audit info before that point we should fix those in the audit log as well. Signed-off-by: Eric Paris <eparis@redhat.com>
-
Al Viro authored
Keeping loginuid in audit_context is racy and results in messier code. Taken to task_struct, out of the way of ->audit_context changes. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
all callers pass something->audit_context Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: kill swap_io_context() as-iosched: fix inconsistent ioc->lock context ide-cd: fix leftover data BUG block: make elevator lib checkpatch compliant cfq-iosched: make checkpatch compliant block: make core bits checkpatch compliant block: new end request handling interface should take unsigned byte counts unexport add_disk_randomness block/sunvdc.c:print_version() must be __devinit splice: always updated atime in direct splice
-
Jens Axboe authored
It blindly copies everything in the io_context, including the lock. That doesn't work so well for either lock ordering or lockdep. There seems zero point in swapping io contexts on a request to request merge, so the best point of action is to just remove it. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Randy Dunlap authored
Fix docbook fatal error (files were renamed): docproc: linux-2.6.24-git9/arch/ppc/kernel/rio.c: No such file or directory Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt authored
Doing a make randconfig I came across this error in the Makefile. This patch makes a directory out of arch/x86/mach-default for CONFIG_X86_RDC321X Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix inconsistent .section usage in lib/ [SPARC/SPARC64]: Fix usage of .section .sched.text in assembler code.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (173 commits) [NETNS]: Lookup in FIB semantic hashes taking into account the namespace. [NETNS]: Add a namespace mark to fib_info. [IPV4]: fib_sync_down rework. [NETNS]: Process interface address manipulation routines in the namespace. [IPV4]: Small style cleanup of the error path in rtm_to_ifaddr. [IPV4]: Fix memory leak on error path during FIB initialization. [NETFILTER]: Ipv6-related xt_hashlimit compilation fix. [NET_SCHED]: Add flow classifier [NET_SCHED]: sch_sfq: make internal queues visible as classes [NET_SCHED]: sch_sfq: add support for external classifiers [NET_SCHED]: Constify struct tcf_ext_map [BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes. [TCP]: Unexport sysctl_tcp_tso_win_divisor [IPV4]: Make struct ipv4_devconf static. [TR] net/802/tr.c: sysctl_tr_rif_timeout static [XFRM]: Fix statistics. [XFRM]: Remove unused exports. [PKT_SCHED] sch_teql.c: Duplicate IFF_BROADCAST in FMASK, remove 2nd. [BNX2]: Fix ASYM PAUSE advertisement for remote PHY. [IPV4] route cache: Introduce rt_genid for smooth cache invalidation ...
-
Olof Johansson authored
[POWERPC] pasemi: Fix thinko in dma_direct_ops setup The first patch will just fall through and still set dma_data to a bad value, make it return directly instead. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove all the dead timer interrupt checking functions for the ColdFire CPU "timers" hardware that are not used after switching to GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switching to GENERIC_TIME means we no longer need the empty timer offset function for the 68360 CPU. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove unused local gettimeofday functions, now that we are using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch m68knommu arch to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch the ColdFire TIMER timer to use GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch the ColdFire PIT timer to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch the 68328 CPU timer code to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove unused CONFIG_DISKtel define. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Fix problems with the 528x ColdFire CPU cache setup. Do not cache the flash region (if present), and make the runtime settings consistent with the init setting. Problems pointed out by Bernd Buttner <b.buettner@mkc-gmbh.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Use container_of() instead of assuming local uart struct is first member of uart_port struct. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove unused LED heartbeat code from m68knommu timer code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Use IRQF_DISABLED instead of obsolete IRQ_FLG_STD for request_irq() flags in m68328serial.c driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Move the ColdFire DMA address table into its own file, and out of each of the different CPU config files. No need to have a copy of it in each of the config setup files. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Modify Makefiles to support separate coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Move common ColdFire CPU vectors.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Move common ColdFire CPU timers.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Move common ColdFire CPU pit.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Move common ColdFire CPU head.S to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Move common ColdFire CPU entry.S to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch to platform style configuration for 5407 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch to platform style configuration for 532x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch to platform style configuration for 527x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch to platform style configuration for 5307 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch to platform style configuration for 528x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Switch to platform style configuration for 5249 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-