- 18 Mar, 2019 28 commits
-
-
Laurent Pinchart authored
The DPI and SDI encoders store the full videomode upon mode set, to only use the value of the pixel clock when enabling the encoder. This wastes memory. Store the pixel clock value only. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
Replace internal usage of struct videomode with struct drm_display_mode in order to avoid converting needlessly between the data structures. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device .check_timings() and .set_timings() operations operate on struct videomode, while the DRM API operates on struct drm_display_mode. This forces conversion from to videomode in the callers. While that's not a problem per se, it creates a difference with the drm_bridge API. Replace the videomode parameter to the .check_timings() and .set_timings() operations with a drm_display_mode. This pushed the conversion to videomode down to the DSS devices in some cases. If needed they will be converted to operate on drm_display_mode natively. Signed-off-by:
-
Laurent Pinchart authored
The encoder .atomic_check() and connector .mode_valid() operations both walk through the dss devices in the pipeline to validate the mode. Factor out the common code in a new omap_drm_connector_mode_fixup() function. Signed-off-by:
-
Laurent Pinchart authored
The mode setting handler of the VENC stores the video mode internally, to then convert it to a configuration when programming the hardware. The stored mode is otherwise unused. Cache the configuration directly instead. Signed-off-by:
-
Laurent Pinchart authored
The DISPC timings checks relate to the CRTC, but they're performed in the encoder and connector .atomic_check() and .mode_valid() operations. Move them to the CRTC .mode_valid() operation. Signed-off-by:
-
Laurent Pinchart authored
The field is only used to check whether the device is connected, and we can do so by checking the dss field instead. Remove the src field. Signed-off-by:
-
Laurent Pinchart authored
For HDMI pipelines, when the output gets disconnected the device handling CEC needs to be notified. Instead of guessing which device that would be (and sometimes getting it wrong), notify all devices in the pipeline. Signed-off-by:
-
Laurent Pinchart authored
The source pointer will be removed to the omap_dss_device structure. Store it internally in the DSI panel driver data. Signed-off-by:
-
Laurent Pinchart authored
Display pipelines based on drm_bridge are handled from the bridge closest to the CRTC. To move to that model we thus need to transition away from walking pipelines in the other direction, and from accessing the device at the end of the pipeline when possible. Remove most accesses to the display device from the omap_connector implementation, and don't store it in the omap_connector structure. - For debug messages we can simply use the connector name instead. - For type checks we can use the drm_connector type. - For operation lookup we can start at the other end of the pipeline and locate the last matching device. The display device is still passed to the connector init function in order to find its type, which requires access to the end of the pipeline. Signed-off-by:
-
Laurent Pinchart authored
The DT bindings for the OMAP DSS allow assigning numerical IDs to display outputs through display entries in the alias node. The driver uses this information to sort pipelines according to the order specified in DT, making it possible for a system to give a priority order to outputs. Retrieval of the alias ID is done when initializing display dss devices. That code will be removed when moving to drm_bridge and drm_panel. Move retrieval of the alias ID to display pipeline connection time and store it in the pipeline structure instead to keep the feature. Signed-off-by:
-
Laurent Pinchart authored
The display isn't used by the encoder implementation, don't pass it to the initialization function and store it internally needlessly. Signed-off-by:
-
Laurent Pinchart authored
The TV encoder supports both PAL and NTSC modes, but when queried for the list of modes it supports, only the currently selected mode is reported. Fix it and report the two modes unconditionally. Signed-off-by:
-
Laurent Pinchart authored
Instead of manually iterating over the dss devices in the pipeline to find the first one that implements the .get_modes() operation, add a new operation flag for .get_modes() and use the omap_connector_find_device() helper function to locate the right dss device. Signed-off-by:
-
Laurent Pinchart authored
Now that the .get_modes() operations takes a drm_connector and fills it with modes, it becomes easy to fill display information in the same operation without requiring a separate .get_size() opearation. Signed-off-by:
-
Laurent Pinchart authored
omap_dss_device operations expose fixed video timings through a .get_timings() operation that return a single timing for the device. To prepare for the move to drm_bridge, modify the API to instead add DRM modes directly to the connector. As this puts more burden on display devices, we also create a helper function for panels to add a single DRM mode from the panel video timings. Signed-off-by:
-
Laurent Pinchart authored
All the internal encoders share common init and cleanup code. Factor it out to separate functions. Signed-off-by:
-
Laurent Pinchart authored
The field is only used in a safety check during device connection/disconnection, where the src field can be easily used instead. Remove it and use src. Signed-off-by:
-
Laurent Pinchart authored
The omapdrm and omapdss drivers are architectured based on display pipelines made of multiple components handled from sink (display) to source (DSS output). This is incompatible with the DRM bridge and panel APIs that handle components from source to sink. Reconcile the omapdrm and omapdss drivers with the DRM bridge and panel model by reversing the direction of the DSS device .enable() and .disable() operations. This completes the move to the DRM bridge model, with the notable exception of the DSI pipelines that will require more work. We also adapt the omapdss shutdown handler dss_shutdown() to shut down all active pipelines starting from the pipeline output device instead of the display device. As a consequence the for_each_dss_display() macro isn't used and can be removed, and the omapdss_device_get_next() function underlying the macro can be simplified to search for output devices only. Signed-off-by:
-
Laurent Pinchart authored
The displays (connectors, panels and encoders) bail out from their .enable() and .disable() handlers if the dss device is already enabled or disabled. Those safety checks are not needed when the functions are called through the omapdss_device_ops, as the .enable() and .disable() handlers are called from the DRM atomic helpers that already guarantee that no double enabling or disabling can occur. However, the handlers are also called directly from the .remove() handler. While this shouldn't be needed either as the modules can't be removed as long as the device is in use, it's still a good practice to disable the device explicitly. There is currently a safety check in .remove() in some drivers but not all of them. Remove the safety checks from the .enable() and .disable() handlers, and add missing ones in the .remove() handler. Signed-off-by:
-
Laurent Pinchart authored
The displays (connectors, panels and encoders) return an error from their .enable() handler when the dss device is not connected. They also disconnect the dss device explicitly from their .remove() handler if it is still connected. Those safety checks are not needed: - The .enable() handler is called from code paths that access the dss devices chain from the display device, which is set to NULL when the device isn't connected. - The .remove() handler can only be called when unloading the module as the driver has the suppress_bind_attrs attribute set, and a reference to the module is taken when constructing the dss devices chain, so the module can only be unloaded when the dss device is disconnected. Remove the safety checks. Signed-off-by:
-
Laurent Pinchart authored
The internal encoders return an error from their .enable() handler when their are not connected to a dss manager. As the flag used is set and cleared in the connect and disconnect handlers, this effectively checks whether the omap_dss_device is connected. The .enable() handler is called from code paths that access the dss devices chain from the display device, which is set to NULL when the device isn't connected, making it impossible to access the device in that case. The safety check is thus not needed, remove it. Signed-off-by:
-
Laurent Pinchart authored
All .enable() and .disable() handlers for panels and connectors share common code that validates and updates the device's state. Move it to common locations in the omap_encoder_enable() and omap_encoder_disable() handlers. The enabled check in the .disable() handler is left untouched, it will be addressed separately. Signed-off-by:
-
Laurent Pinchart authored
Instead of rolling out custom suspend/resume implementations based on state information stored in the driver's data structures, use the atomic suspend/resume helpers that rely on a DRM atomic state object. Signed-off-by:
-
Laurent Pinchart authored
The venc_device structure wss_data field is set to 0 and never otherwise modified, remove it. Signed-off-by:
-
Laurent Pinchart authored
The kobj field from struct omap_dss_device is not used. Remove it. Signed-off-by:
-
Laurent Pinchart authored
The omap_connector_attached_encoder() doesn't exist anymore, remove its declaration from omap_connector.h. Signed-off-by:
-
Laurent Pinchart authored
The mode_valid_path() function validates the mode it receives without ever modifying it. Constify the mode pointer argument to make that explicit. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 17 Mar, 2019 12 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
-
kbuild test robot authored
Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
-
Masahiro Yamada authored
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: -
Masahiro Yamada authored
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Douglas Anderson authored
This reverts commit caf6fe91. The commit was fine but is no longer needed as of commit 3a2429e1 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.comSigned-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Douglas Anderson authored
During a simple no-op (nothing changed) build I saw 39 invocations of the C compiler with the argument "-print-file-name=include". We don't need to call the C compiler 39 times for this--one time will suffice. Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid this since there doesn't appear to be any reason it should be recursively expanded. On my build this shaved ~400 ms off my "no-op" build. Note that the recursive expansion seems to date back to the (really old) commit e8f5bdb0 ("[PATCH] Makefile include path ordering"). It's a little unclear to me if the point of that patch was to switch the variable to be recursively expanded (which it did) or to avoid directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because someone else (out of tree?) was setting it. I presume later since if the only goal was to switch to recursive expansion the patch would have just removed the ":". Signed-off-by:
-
