Merge "mvebu dt changes for v4.2 (part #2)" from Gregory CLEMENT:

Add 2 new set boards:
- Armada 385 based Linksys boards
- DLink DNS-327L

Update the spi-nor flash compatible strings

Use improved armada spi device tree compatible name for each mvebu SoC

* tag 'mvebu-dt-4.2-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: use improved armada spi device tree compatible name for each SoC
  ARM: mvebu: dts: Add dts file for DLink DNS-327L
  ARM: mvebu: add "jedec,spi-nor" flash compatible binding
  ARM: kirkwood: add "jedec,spi-nor" flash compatible binding
  ARM: mvebu: add support for the new Armada 385 based Linksys boards

Merge "Documentation: bindings: Add DT bindings for ARM Juno boards" from Liviu Dudau:

* 'for-upstream/juno-dts' of git://linux-arm.org/linux-ld:
  Documentation: bindings: Add DT bindings for ARM Juno boards.
  arm64: Add DT support for Juno r1 board.
  arm64: Juno: Add GICv2m support in device tree.
  arm64: Juno: Add memory mapped timer node
  arm64: Juno: Split juno.dts into juno-base.dtsi and juno.dts.
  arm64: Juno: Fix the GIC node address label and the frequency of FAXI clock.

Merge tag 'qcom-arm64-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt

Merge "Qualcomm ARM64 Updates for v4.2" Kumar Gala:

* Added SPMI PMIC Arbiter device tree node for MSM8916
* Added 8x16 chipset SPMI PMIC's nodes
* Added MSM8916 restart device node
* Added initial set of PMIC and SoC pins for APQ8016 SBC board

* tag 'qcom-arm64-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  arm64: dts: qcom: Add initial set of PMIC and SoC pins for APQ8016 SBC board
  arm64: dts: qcom: Add MSM8916 restart device node
  arm64: dts: qcom: Add 8x16 chipset SPMI PMIC's nodes
  arm64: dts: qcom: Add SPMI PMIC Arbiter node for MSM8916

Merge tag 'renesas-dt2-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.2" from Simon Horman:

* Describe DMA for the serial ports of R-Car Gen2 SoCs
* Add MMCIF max-frequency to R-Car Gen2 SoCs
* Use "nor-jedec" instead of "jedec,spi-nor"

* tag 'renesas-dt2-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790 dtsi: Describe DMA for the serial ports
  ARM: shmobile: r8a7791 dtsi: Describe DMA for the serial ports
  ARM: shmobile: r8a7794 dtsi: Describe DMA for the serial ports
  ARM: shmobile: r8a7791: add MMCIF max-frequency
  ARM: shmobile: r8a7790: add MMCIF max-frequency
  ARM: shmobile: bockw dts: Replace "nor-jedec" by "jedec,spi-nor"
  ARM: shmobile: henninger dts: Replace "nor-jedec" by "jedec,spi-nor"
  ARM: shmobile: bockw-reference dts: Replace "nor-jedec" by "jedec,spi-nor"
  ARM: shmobile: koelsch dts: Replace "nor-jedec" by "jedec,spi-nor"
  ARM: shmobile: lager dts: Replace "nor-jedec" by "jedec,spi-nor"

Merge "arm: Xilinx Zynq dt patches for v4.2" from Michal Simek:

- Fix aliases and stdout properties
- Document current TTC binding
- Add Ceva to prefixes
- Use new compatible string for MACB

* tag 'zynq-dt-for-4.2' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: DT: Use the zynq binding with macb
  of: Add vendor prefix for Ceva
  PCI: xilinx: Trivial fix in DT example
  devicetree: cadence_ttc: Document binding for timer width
  ARM: dts: zynq: Fix stdout-path and bootargs
  ARM: dts: zynq: Add missing alias node for zybo and parallella

Merge "ARM: mediatek: dts updates for v4.2" from Matthias Brugger:
- dts: add pinctrl/GPIO/EINT to mt8135
- dts: fix uart address for mt8127

* tag 'v4.1-next-dts' of https://github.com/mbgg/linux-mediatek:
  ARM: dts: mt8127: correct uart instance address
  ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135.

Merge tag 'qcom-dt-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt

Merge "Qualcomm ARM Based Device Tree Updates for v4.2" from Kumar Gala:

* Added support for regulators, USB Host & OTG, SATA, and i2c
  controllers on APQ8064 based platforms
* Added PM8841/PM8941/PMA8084 device nodes
* Added PMU support on MSM8660

* tag 'qcom-dt-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: dts: qcom: Add msm8660 PMU node
  ARM: dts: qcom: Add PMA8084 functions device nodes
  ARM: dts: qcom: Add PM8941 functions device nodes
  ARM: dts: qcom: Add PM8841 functions device nodes
  ARM: dts: qcom: apq8064 - add i2c3 node for panel.
  ARM: dts: qcom: apq8064 - Move i2c1 pinctrl to apq8064.dtsi
  ARM: dts: qcom: apq8064-ifc6410 - Add DT alias for serial port
  ARM: dts: qcom: apq8064 - Add USB OTG support for CM QS-600
  ARM: dts: qcom: apq8064 - Add usb host support to CM QS-600
  ARM: dts: qcom: apq8064-cm-qs600 - Add basic regulators
  ARM: dts: qcom: apq8064 - Add SATA controller support
  ARM: dts: qcom: apq8064 - Add USB OTG support
  ARM: dts: qcom: apq8064 - Add usb host support.
  ARM: dts: qcom: apq8064-ifc6410 - Add basic regulators
  ARM: dts: qcom: apq8064 - add RPM regulators support

Merge tag 'omap-for-v4.2/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Device tree related changes for omaps" from Tony Lindgren:

- Configure MMC data lines 4..8 for 1.8V IO on boards that
  are using them as GPIOs instead of MMC data lines

- Add support for Baltos IR5221

- Add device tree support for LogicPD Torpedo devkit

- Add 3717 core pinctrl region

- Add gta04 1w and GSM audio support

- Add wilink and ov2659 support for am437x-gp-evm

- Add am335x-evm bluetooth and mmc3 support

- Enable omap5-uevm uart wakeup interrupt

- Enable I2C2 on BeagleBone as it's used for the capes

- Use defines for LDP GPIO keys

* tag 'omap-for-v4.2/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-evm: add mmc3 and wlan definitions to dts
  ARM: dts: Enable SDIO card interrupt for 37xx-evm
  ARM: dts: Fix ldp gpio keys to use defines
  ARM: dts: Beaglebone i2c definitions
  ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor
  ARM: dts: add DTS for Baltos IR5221
  ARM: dts: omap5-uevm: Add Uart wakeup interrupt
  ARM: dts: omap3-gta04: Add GSM audio support
  ARM: dts: am335x-evm: add bluetooth support
  ARM: dts: am437x-gp-evm: add wilink8 support
  ARM: dts: omap3-gta04: Add hdqw1 support
  ARM: dts: add core2 padconf region for am3517
  ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit
  ARM: OMAP3: Add support for configuring MMC pins as GPIO pins

Use the new zynq binding for macb ethernet, since it will disable half
duplex gigabit like the Zynq TRM says to do. Also allow the compatible
cadence gem binding that won't disable half duplex but works otherwise.
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Good to have it properly describe for c&p cases.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>

Modern TTC implementations can extend the timer width to 32 bit. This
feature is not self identifying so the driver needs to be made aware
via device tree.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

parallella - Remove linux,stdout-path.
Use stdout-path to identify kernel console
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>

Add missing alias node.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>

Use the new compatible introduced in order to benefit of a wider and
more accurate range of baud rates to be used.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

DNS-327L is a 2-bay NAS with the following specs:
     - 512MiB RAM
     - 128MiB NAND Flash
     - 1 GbE interface (Marvell PHY)
     - 1 rear USB 3.0 port (via PCIe USB 3.0 controller)
     - 2 internal SATA ports handled by the Armada 370:
       	 uses 2 gpios for power control
     - two front 2-color leds (amber + white) for both discs,
        controlled by the SoC
     - One white LED handled by SoC (USB)
     - 3 buttons. Power handled by weltrend, USB and
       RESET (on the bottom) are wired via GPIOs
     - Unidentified i2c device at address 0x13 (via i2cdetect)
     - UART0 providing serial console
     - Weltrend MCU serving for RTC, temperature, fan control,
       and power button handling interfaced via UART1
       (Handled via userspace dns320l-daemon)
Signed-off-by: Andrew Andrianov <andrew@ncrmnt.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Starting with commit 8947e396 ("Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor"
binding indicating support for JEDEC identification.

Use it for all flashes that are supposed to support READ ID op according
to the datasheets.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Starting with commit 8947e396 ("Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor"
binding indicating support for JEDEC identification.

Use it for all flashes that are supposed to support READ ID op according
to the datasheets.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

This patch adds support for the Linksys WRT1200AC (Caiman) and
the Linksys WRT1900AC v2 (Cobra).

Both boards have:

- 2 Marvell 88W8864 radios
- 1 USB 3.0 port
- 1 USB 2.0/eSATAp port
- 2 Ethernet interfaces connected to a 88E6176 switch (1x WAN + 4x LAN)
- 128MB NAND flash
- 512MB RAM

gregory.clement@free-electrons.com: use serial0:115200n8 in
stdout-path and remove the bootargs part in the chosen node
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge "Documentation: bindings: Add DT bindings for ARM Juno boards" from Liviu Dudau:

* 'for-upstream/juno-dts' of git://linux-arm.org/linux-ld:
  Documentation: bindings: Add DT bindings for ARM Juno boards.
  arm64: Add DT support for Juno r1 board.
  arm64: Juno: Add GICv2m support in device tree.
  arm64: Juno: Add memory mapped timer node
  arm64: Juno: Split juno.dts into juno-base.dtsi and juno.dts.
  arm64: Juno: Fix the GIC node address label and the frequency of FAXI clock.

List the required properties and nodes used to describe the
ARM Juno boards.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

This board is based on Juno r0 with updated Cortex A5x revisions
and board errata fixes. It also contains coherent ThinLinks ports
on the expansion slot that allow for an AXI master on the daughter
card to participate in a coherency domain.

Support for SoC PCIe host bridge will be added as a separate series.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>

Juno contains a GICv2m extension for handling PCIe MSI messages.
Add a node declaring the first frame of the extension.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>

Juno based boards have a memory mapped timer @ 0x2a810000. This
is disabled on r0 version of the board due to an SoC errata.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>

Prepare the device tree for adding more boards based on Juno r0.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>

During the review of the Juno DT files I've noticed that the GIC
node label had two digits swapped leading to a different address
being shown in the /sys/devices fs.

Sudeep also pointed that public revisions of the Juno documentation
list a different frequency for the FAXI system than what the one
I've been using when creating the DT file. Verified with the firmware
people to be the correct value in the shipped systems.
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>

Merge tag 'at91-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "Third batch of DT changes for 4.2" from Nicolas Ferre:

- USB host clock refine following changes in drivers
- one little fix for usart pinctrl

* tag 'at91-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: remove useless usb clock
  ARM: at91/dt: remove useless uhpck clock references from ehci defintions
  USB: atmel: update DT bindings documentation
  ARM: at91/dt: at91sam9x5: fix usart1 sck pin definition

Merge tag 'v4.2-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "ARM: rockchip: dts relicensing for 4.2" from Heiko Stuebner:

Relicense all Rockchip-related devicetree files to the GPL2/X11 combo.
I've now finally aquired necessary Acks from all contributors.

* tag 'v4.2-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: relicense rk3288-evb* under GPLv2/X11
  ARM: dts: rockchip: relicense rk3288.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3188-radxarock.dts under GPLv2/X11
  ARM: dts: rockchip: relicense rk3066a-bqcurie2.dts under GPLv2/X11
  ARM: dts: rockchip: relicense rk3288-thermal.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3188.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3066a.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3xxx.dtsi under GPLv2/X11

The ohci driver now calls clk_set_rate on the uhpck clock (which forwards
set_rate requests to its parent: the usb clock).
Remove useless references to usb clocks from ohci definitions.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The uhpck is useless for High-Speed communications, remove the reference
to this clock in all ehci definitions.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add documentation for the missing clocks, clock-names, reg and interrupts
properties.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This includes the wlan regulator, pinmux, DMA
and wlcore bindings.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Cfr. commit 8947e396 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Cfr. commit 8947e396 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Cfr. commit 8947e396 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>