Mark rtc sa1100 driver as wakeup source before registering it.
rtc_device_register evaluates device_can_wakeup(rtc->dev.parent) and
supresses the creation of /sys/class/rtc/rtcX/wakealarm if
device_can_wakeup is not (yet) true.
Signed-off-by: Uli Luckas <u.luckas@road.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This issue was found by Krzysztof Helt and Eric Miao.

pxafb had issues in the order with which it cleaned up if errors occurred
during a probe. This patch reorders the failure handling sequence and also
frees the cmap and clk.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This bug was found and fixed by Lothar Wassmann.

Previously, the use of ifndef CONFIG_MODULES made it such that pxafb command
line option parsing was dependent on whether the kernel was built with module
support. The ifndef should be MODULE so that parsing is dependent only on
whether the driver is built-in or not.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The zonelist patches caused the loop that checks for available
objects in permitted zones to not terminate immediately. One object
per zone per allocation may be allocated and then abandoned.

Break the loop when we have successfully allocated one object.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  Ext4: Fix online resize block group descriptor corruption

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (lm75) sensor reading bugfix
  hwmon: (abituguru3) update driver detection
  hwmon: (w83791d) new maintainer
  hwmon: (abituguru3) Identify Abit AW8D board as such
  hwmon: Update the sysfs interface documentation
  hwmon: (adt7473) Initialize max_duty_at_overheat before use
  hwmon: (lm85) Fix function RANGE_TO_REG()

This patch changes the function reserve_bootmem_node() from void to int,
returning -ENOMEM if the allocation fails.

This fixes a build problem on x86 with CONFIG_KEXEC=y and
CONFIG_NEED_MULTIPLE_NODES=y
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netns: Don't receive new packets in a dead network namespace.
  sctp: Make sure N * sizeof(union sctp_addr) does not overflow.
  pppoe: warning fix
  ipv6: Drop packets for loopback address from outside of the box.
  ipv6: Remove options header when setsockopt's optlen is 0
  mac80211: detect driver tx bugs

Alexey Dobriyan <adobriyan@gmail.com> writes:
> Subject: ICMP sockets destruction vs ICMP packets oops

> After icmp_sk_exit() nuked ICMP sockets, we get an interrupt.
> icmp_reply() wants ICMP socket.
>
> Steps to reproduce:
>
> 	launch shell in new netns
> 	move real NIC to netns
> 	setup routing
> 	ping -i 0
> 	exit from shell
>
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
> IP: [<ffffffff803fce17>] icmp_sk+0x17/0x30
> PGD 17f3cd067 PUD 17f3ce067 PMD 0 
> Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC
> CPU 0 
> Modules linked in: usblp usbcore
> Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4
> RIP: 0010:[<ffffffff803fce17>]  [<ffffffff803fce17>] icmp_sk+0x17/0x30
> RSP: 0018:ffffffff8057fc30  EFLAGS: 00010286
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900
> RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800
> RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815
> R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28
> R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800
> FS:  0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0)
> Stack:  0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4
>  ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246
>  000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436
> Call Trace:
>  <IRQ>  [<ffffffff803fcfe4>] icmp_reply+0x44/0x1e0
>  [<ffffffff803d3a0a>] ? ip_route_input+0x23a/0x1360
>  [<ffffffff803fd645>] icmp_echo+0x65/0x70
>  [<ffffffff803fd300>] icmp_rcv+0x180/0x1b0
>  [<ffffffff803d6d84>] ip_local_deliver+0xf4/0x1f0
>  [<ffffffff803d71bb>] ip_rcv+0x33b/0x650
>  [<ffffffff803bb16a>] netif_receive_skb+0x27a/0x340
>  [<ffffffff803be57d>] process_backlog+0x9d/0x100
>  [<ffffffff803bdd4d>] net_rx_action+0x18d/0x250
>  [<ffffffff80237be5>] __do_softirq+0x75/0x100
>  [<ffffffff8020c97c>] call_softirq+0x1c/0x30
>  [<ffffffff8020f085>] do_softirq+0x65/0xa0
>  [<ffffffff80237af7>] irq_exit+0x97/0xa0
>  [<ffffffff8020f198>] do_IRQ+0xa8/0x130
>  [<ffffffff80212ee0>] ? mwait_idle+0x0/0x60
>  [<ffffffff8020bc46>] ret_from_intr+0x0/0xf
>  <EOI>  [<ffffffff80212f2c>] ? mwait_idle+0x4c/0x60
>  [<ffffffff80212f23>] ? mwait_idle+0x43/0x60
>  [<ffffffff8020a217>] ? cpu_idle+0x57/0xa0
>  [<ffffffff8040f380>] ? rest_init+0x70/0x80
> Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53
> 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08
> 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00
> RIP  [<ffffffff803fce17>] icmp_sk+0x17/0x30
>  RSP <ffffffff8057fc30>
> CR2: 0000000000000000
> ---[ end trace ea161157b76b33e8 ]---
> Kernel panic - not syncing: Aiee, killing interrupt handler!

Receiving packets while we are cleaning up a network namespace is a
racy proposition. It is possible when the packet arrives that we have
removed some but not all of the state we need to fully process it.  We
have the choice of either playing wack-a-mole with the cleanup routines
or simply dropping packets when we don't have a network namespace to
handle them.

Since the check looks inexpensive in netif_receive_skb let's just
drop the incoming packets.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As noticed by Gabriel Campana, the kmalloc() length arg
passed in by sctp_getsockopt_local_addrs_old() can overflow
if ->addr_num is large enough.

Therefore, enforce an appropriate limit.
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix warning:
drivers/net/pppoe.c: In function 'pppoe_recvmsg':
drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast
because skb->len is unsigned int and total_len is size_t
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] SN2: security hole in sn2_ptc_proc_write

Which was removed in the hope that generic legacy IDE quirk in
drivers/pci/probe.c is sufficient for Cypress IDE.
It isn't, as this controller has non-standard BAR layout:
secondary channel registers are in the BAR0-1 of the second
PCI function - not in the BAR2-3 of the same function, as the
generic quirk routine assumes.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Vast majority of these build failures are gcc-4.3 warnings
about static functions and objects being referenced from
non-static (read: "extern inline") functions, in conjunction
with our -Werror.

We cannot just convert "extern inline" to "static inline",
as people keep suggesting all the time, because "extern inline"
logic is crucial for generic kernel build.
So
- just make sure that all callees of critical "extern inline"
  functions are also "extern inline";
- use "static inline", wherever it's possible.

traps.c: work around gcc-4.3 being too smart about array
bounds-checking.

TODO: add "gnu_inline" attribute to all our "extern inline"
functions to ensure desired behaviour with future compilers.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With built-in scsi disk driver, the final link fails with a following
error:
`.exit.text' referenced in section `.rodata' of drivers/built-in.o:
defined in discarded section `.exit.text' of drivers/built-in.o

This happens with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE=y) with all gcc-4
versions, and also with -O2 and gcc-4.3.

The problem is in sd.c:sd_major() being inlined into __exit function
exit_sd(), and the compiler generating a jump table in .rodata section
for the 'switch' statement in sd_major(). So we have references to
discarded section.

Fixed with a big hammer in the form of -fno-jump-tables.

Note that jump tables vs. discarded sections is a generic problem,
other architectures are just lucky not to suffer from it. But with
a slightly more complex switch/case statement it can be reproduced
on x86 as well. So maybe at some point we should consider
-fno-jump-tables as a generic compile option...
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To calculate addresses of locally defined variables, GCC uses 32-bit
displacement from the GP. Which doesn't work for per cpu variables in
modules, as an offset to the kernel per cpu area is way above 4G.

The workaround is to force allocation of a GOT entry for per cpu variable
using ldq instruction with a 'literal' relocation.
I had to use custom asm/percpu.h, as a required argument magic doesn't
work with asm-generic/percpu.h macros.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  BAST: Remove old IDE driver
  pcmcia ide kingston compactflash's have a new manufacturer id
  pcmcia: add another pata/ide ID
  pcmcia: add an pata/ide ID
  ide: increase timeout in wait_drive_not_busy()
  palm_bk3710: fix resource management

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: Kconfig menu touch-up
  firewire: Kconfig menu touch-up
  firewire: deadline for PHY config transmission
  firewire: fw-ohci: unify printk prefixes
  firewire: fill_bus_reset_event needs lock protection
  firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID
  firewire: fw-ohci: disable PHY packet reception into AR context
  firewire: fw-ohci: use of uninitialized data in AR handler
  firewire: don't panic on invalid AR request buffer

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: no AC status notification
  ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits)
  drm: only trust core drm ioctls - driver ioctls are a mess.
  drm/i915: add support for Intel series 4 chipsets.
  drm/radeon: add hier-z registers for r300 and r500 chipsets
  drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT
  drm/radeon: switch IGP gart to use radeon_write_agp_base()
  drm/radeon: Restore sw interrupt on resume
  drm/r500: add support for AGP based cards.
  drm/radeon: fix texture uploads with large 3d textures (bug 13980)
  drm/radeon: add initial r500 support.
  drm/radeon: init pipe setup in kernel code.
  drm/radeon: fixup radeon_do_engine_reset
  drm/radeon: fix pixcache and purge/cache flushing registers
  drm/radeon: write AGP_BASE_2 on chips that support it.
  drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support
  drm/radeon: IGP clean up register and magic numbers.
  drm/rs690: set base 2 to 0.
  drm/rs690: set all of gart base address.
  radeon: add production microcode from AMD
  drm: pcigart use proper pci map interfaces.
  drm: the sg alloc ioctl should write back the handle to userspace
  ...

* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  [agp]: fixup chipset flush for new Intel G4x.
  agp: brown paper bag patch - put back the two lines it took out.

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression
  rcupreempt: remove export of rcu_batches_completed_bh
  cpuset: limit the input of cpuset.sched_relax_domain_level

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue
  sched: CPU hotplug events must not destroy scheduler domains created by the cpusets
  sched: rt-group: fix RR buglet
  sched: rt-group: heirarchy aware throttle
  sched: rt-group: fix hierarchy
  sched: NULL pointer dereference while setting sched_rt_period_us
  sched: fix defined-but-unused warning

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, geode: add a VSA2 ID for General Software
  x86: use BOOTMEM_EXCLUSIVE on 32-bit
  x86, 32-bit: fix boot failure on TSC-less processors
  x86: fix NULL pointer deref in __switch_to
  x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue.
  Blackfin arch: fix typo error in bf548 serial header file

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: sis can't do PMP
  ata_piix: add TECRA M4 to broken suspend list
  LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
  sata_mv: warn on PIO with multiple DRQs
  sata_mv: enable async_notify for 60x1 Rev.C0 and higher
  libata: don't check whether to use DMA or not for no data commands
  ahci: jmb361 has only one port

The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken,
and included all the function prologue and epilogue stuff, even though
it was itself then inside a C function where the compiler would add its
own prologue and epilogue on top of it all.

This then just _happened_ to work if you had exactly the right compiler
version and exactly the right compiler flags, so that gcc just happened
to not create any prologue at all (the gcc-generated epilogue wouldn't
matter, since it would never be reached).

But the more proper way to fix it is to simply not do this.  Move the
inline asm to the top level, with no surrounding function at all (the
better alternative would be to remove the prologue and make it actually
use proper description of the arguments to the inline asm, but that's a
bigger change than the one I'm willing to make right now).
Tested-by: S.Çağlar Onur <caglar@pardus.org.tr>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Security hole in sn2_ptc_proc_write

It is possible to overrun a buffer with a write to this /proc file.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Remove the old BAST IDE driver, as we are now using the platform-pata
support.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID,
In their new CF cards, they use a new one.  Let's the ide subsystem
recognize CF cards with the new id.
Signed-off-by: Christophe Niclaes <cniclaes@develtech.com>
Acked-by: Philippe De Muyter <phdm@macqel.be>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Addition of Transcend 1GB 45x id so that it is properly detected.

[bart: fix typo in ide-cs's ID spotted by Alan Cox]
Signed-off-by: William Peters <w1ll14@gmail.com>
Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add an id for:

product info: "M-Systems", "CF300", ""
manfid: 0x000a, 0x0000
function: 4 (fixed disk)
Signed-off-by: Matt Reimer <mreimer@vpop.net>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Some ATAPI devices take longer than the current max timeout value to
become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout
value to 10 ms.

This fixes kernel.org bugzilla bug #10887:
http://bugzilla.kernel.org/show_bug.cgi?id=10887Reported-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The driver expected a *virtual* address in the IDE platform device's memory
resource and didn't request the memory region for the register block. Fix this
taking into account the fact that DaVinci SoC devices are fixed-mapped to the
virtual memory early and we can get their virtual addresses using IO_ADDRESS()
macro, not having to call ioremap()...

While at it, also do some cosmetic changes...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit
557ed1fa ("remove ZERO_PAGE") removed
the ZERO_PAGE from the VM mappings, any users of get_user_pages() will
generally now populate the VM with real empty pages needlessly.

We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but
since fault handling no longer uses ZERO_PAGE for new anonymous pages,
we now need to handle that special case in follow_page() instead.

In particular, the removal of ZERO_PAGE effectively removed the core
file writing optimization where we would skip writing pages that had not
been populated at all, and increased memory pressure a lot by allocating
all those useless newly zeroed pages.

This reinstates the optimization by making the unmapped PTE case the
same as for a non-existent page table, which already did this correctly.

While at it, this also fixes the XIP case for follow_page(), where the
caller could not differentiate between the case of a page that simply
could not be used (because it had no "struct page" associated with it)
and a page that just wasn't mapped.

We do that by simply returning an error pointer for pages that could not
be turned into a "struct page *".  The error is arbitrarily picked to be
EFAULT, since that was what get_user_pages() already used for the
equivalent IO-mapped page case.

[ Also removed an impossible test for pte_offset_map_lock() failing:
  that's not how that function works ]
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the patch for the group descriptor table corruption during
online resize pointed out by Theodore Tso.  The problem was caused by
the fact that the ext4 group descriptor can be either 32 or 64 bytes
long.  Only the 64 bytes structure was taken into account.
Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

So driver ioctls need a full auditing before we can make this change.
Signed-off-by: Dave Airlie <airlied@redhat.com>