Skip to content

L
linux
Switch branch/tag
  1. 09 Sep, 2020 3 commits
  3. 08 Sep, 2020 2 commits
    • Vladimir Oltean's avatar
      net: dsa: don't print non-fatal MTU error if not supported · 4349abdb
      Vladimir Oltean authored 
      Commit 72579e14 ("net: dsa: don't fail to probe if we couldn't set
the MTU") changed, for some reason, the "err && err != -EOPNOTSUPP"
check into a simple "err". This causes the MTU warning to be printed
even for drivers that don't have the MTU operations implemented.
Fix that.
Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      4349abdb
    • Vladimir Oltean's avatar
      net: dsa: change PHY error message again · c9ebf126
      Vladimir Oltean authored 
      slave_dev->name is only populated at this stage if it was specified
through a label in the device tree. However that is not mandatory.
When it isn't, the error message looks like this:

[    5.037057] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[    5.044672] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[    5.052275] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d
[    5.059877] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d

which is especially confusing since the error gets printed on behalf of
the DSA master (fsl_enetc in this case).

Printing an error message that contains a valid reference to the DSA
port's name is difficult at this point in the initialization stage, so
at least we should print some info that is more reliable, even if less
user-friendly. That may be the driver name and the hardware port index.

After this change, the error is printed as:

[    6.051587] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 0
[    6.061192] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 1
[    6.070765] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 2
[    6.080324] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 3
Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c9ebf126
  5. 07 Sep, 2020 32 commits
  7. 06 Sep, 2020 3 commits
    • Christophe JAILLET's avatar
      enic: switch from 'pci_' to 'dma_' API · 02a20d4f
      Christophe JAILLET authored 
      The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'vnic_dev_classifier()', 'vnic_dev_fw_info()',
'vnic_dev_notify_set()' and 'vnic_dev_stats_dump()' (vnic_dev.c) GFP_ATOMIC
must be used because its callers take a spinlock before calling these
functions.

When memory is allocated in '__enic_set_rsskey()' and 'enic_set_rsscpu()'
GFP_ATOMIC must be used because they can be called with a spinlock.
The call chain is:
  enic_reset                         <-- takes 'enic->enic_api_lock'
    --> enic_set_rss_nic_cfg
      --> enic_set_rsskey
        --> __enic_set_rsskey        <-- uses dma_alloc_coherent
      --> enic_set_rsscpu            <-- uses dma_alloc_coherent

When memory is allocated in 'vnic_dev_init_prov2()' GFP_ATOMIC must be used
because a spinlock is hidden in the ENIC_DEVCMD_PROXY_BY_INDEX macro, when
this function is called in 'enic_set_port_profile()'.

When memory is allocated in 'vnic_dev_alloc_desc_ring()' GFP_KERNEL can be
used because it is only called from 5 functions ('vnic_dev_init_devcmd2()',
'vnic_cq_alloc()', 'vnic_rq_alloc()', 'vnic_wq_alloc()' and
'enic_wq_devcmd2_alloc()'.

  'vnic_dev_init_devcmd2()': already uses GFP_KERNEL and no lock is taken
     in the between.
  'enic_wq_devcmd2_alloc()': is called from ' vnic_dev_init_devcmd2()'
     which already uses GFP_KERNEL and no lock is taken in the between.
  'vnic_cq_alloc()', 'vnic_rq_alloc()', 'vnic_wq_alloc()': are called
     from 'enic_alloc_vnic_resources()'
'enic_alloc_vnic_resources()' has only 2 call chains:

  1) enic_probe
      --> enic_dev_init
        --> enic_alloc_vnic_resources
'enic_probe()' is a probe function and no lock is taken in the between

  2) enic_set_ringparam
      --> enic_alloc_vnic_resources
'enic_set_ringparam()' is a .set_ringparam function (see struct
ethtool_ops). It seems to only take a mutex and no spinlock.

So all paths are safe to use GFP_KERNEL.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      02a20d4f
    • Linus Walleij's avatar
      net: gemini: Clean up phy registration · 3e813d61
      Linus Walleij authored 
      It's nice if the phy is online before we register the netdev
so try to do that first.

Stop trying to do "second tried" to register the phy, it
works perfectly fine the first time.

Stop remvoving the phy in uninit. Remove it when the
driver is remove():d, symmetric to where it is added, in
probe().
Suggested-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reported-by: default avatarDavid Miller <davem@davemloft.net>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3e813d61
    • Jonathan Neuschäfer's avatar
      net: Add a missing word · ee1a4c84
      Jonathan Neuschäfer authored 
      Signed-off-by: default avatarJonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      ee1a4c84
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7