- 02 Apr, 2020 25 commits
-
-
Linus Torvalds authored
commit 5076190d upstream. This is just a cleanup addition to Jann's fix to properly update the transaction ID for the slub slowpath in commit fd4d9c7d ("mm: slub: add missing TID bump.."). The transaction ID is what protects us against any concurrent accesses, but we should really also make sure to make the 'freelist' comparison itself always use the same freelist value that we then used as the new next free pointer. Jann points out that if we do all of this carefully, we could skip the transaction ID update for all the paths that only remove entries from the lists, and only update the TID when adding entries (to avoid the ABA issue with cmpxchg and list handling re-adding a previously seen value). But this patch just does the "make sure to cmpxchg the same value we used" rather than then try to be clever. Acked-by:
Jann Horn <jannh@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chunguang Xu authored
commit 7d36665a upstream. An eventfd monitors multiple memory thresholds of the cgroup, closes them, the kernel deletes all events related to this eventfd. Before all events are deleted, another eventfd monitors the memory threshold of this cgroup, leading to a crash: BUG: kernel NULL pointer dereference, address: 0000000000000004 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 800000033058e067 P4D 800000033058e067 PUD 3355ce067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3 Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014 Workqueue: events memcg_event_remove RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190 RSP: 0018:ffffb47e01c4fe18 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff8bb223a8a000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffff8bb22fb83540 RDI: 0000000000000001 RBP: ffffb47e01c4fe48 R08: 0000000000000000 R09: 0000000000000010 R10: 000000000000000c R11: 071c71c71c71c71c R12: ffff8bb226aba880 R13: ffff8bb223a8a480 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8bb242680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 000000032c29c003 CR4: 00000000001606e0 Call Trace: memcg_event_remove+0x32/0x90 process_one_work+0x172/0x380 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 CR2: 0000000000000004 We can reproduce this problem in the following ways: 1. We create a new cgroup subdirectory and a new eventfd, and then we monitor multiple memory thresholds of the cgroup through this eventfd. 2. closing this eventfd, and __mem_cgroup_usage_unregister_event () will be called multiple times to delete all events related to this eventfd. The first time __mem_cgroup_usage_unregister_event() is called, the kernel will clear all items related to this eventfd in thresholds-> primary. Since there is currently only one eventfd, thresholds-> primary becomes empty, so the kernel will set thresholds-> primary and hresholds-> spare to NULL. If at this time, the user creates a new eventfd and monitor the memory threshold of this cgroup, kernel will re-initialize thresholds-> primary. Then when __mem_cgroup_usage_unregister_event () is called for the second time, because thresholds-> primary is not empty, the system will access thresholds-> spare, but thresholds-> spare is NULL, which will trigger a crash. In general, the longer it takes to delete all events related to this eventfd, the easier it is to trigger this problem. The solution is to check whether the thresholds associated with the eventfd has been cleared when deleting the event. If so, we do nothing. [akpm@linux-foundation.org: fix comment, per Kirill] Fixes: 907860ed ("cgroups: make cftype.unregister_event() void-returning") Signed-off-by:
Chunguang Xu <brookxu@tencent.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/077a6f67-aefa-4591-efec-f2f3af2b0b02@gmail.comSigned-off-by:
-
Corentin Labbe authored
commit 5d892919 upstream. I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe': rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq' max8907 should select REGMAP_IRQ Fixes: 94c01ab6 ("rtc: add MAX8907 RTC driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Alexander Shishkin authored
commit ce666be8 upstream. There are a few places in the driver that end up returning ENOTSUPP to the user, replace those with EINVAL. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: ba82664c ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.comSigned-off-by:
-
Samuel Thibault authored
commit 9d32c0cd upstream. get_char was erroneously given the address of the pointer to the text instead of the address of the text, thus leading to random crashes when the user requests speaking a word while the current position is on a space character and say_word_ctl is not enabled. Reported-on: https://github.com/bytefire/speakup/issues/1Reported-by:
Kirk Reiser <kirk@reisers.ca> Reported-by:
Janina Sajka <janina@rednote.net> Reported-by:
Alexandr Epaneshnikov <aarnaarn2@gmail.com> Reported-by:
Gregory Nowak <greg@gregn.net> Reported-by:
deedra waters <deedra@the-brannons.com> Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by:
Michael Taboada <michael@michaels.world> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@functionSigned-off-by:
-
Michael Straube authored
commit bb5786b9 upstream. This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7Signed-off-by:
Michael Straube <straube.linux@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312093652.13918-1-straube.linux@gmail.comSigned-off-by:
-
Michał Mirosław authored
commit 53dd0a7c upstream. SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least SAMA5D27 doesn't). Fix this by forcing card-detect in the module if module-controlled CD is not used. Fixed commit addresses the problem only for non-removable cards. This amends it to also cover gpio-cd case. Cc: stable@vger.kernel.org Fixes: 7a1e3f14 ("mmc: sdhci-of-at91: force card detect value for non removable devices") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.plSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Stephan Gerhold authored
commit b500c086 upstream. At the moment, reading from in_magn_*_raw in sysfs tends to return large values around 65000, even though the output of ak8974 is actually limited to ±32768. This happens because the value is never converted to the signed 16-bit integer variant. Add an explicit cast to s16 to fix this. Fixes: 7c94a8b2 ("iio: magn: add a driver for AK8974") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Linus Waleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Takashi Iwai authored
commit 5461e053 upstream. The return value checks in snd_pcm_plug_alloc() are covered with snd_BUG_ON() macro that may trigger a kernel WARNING depending on the kconfig. But since the error condition can be triggered by a weird user space parameter passed to OSS layer, we shouldn't give the kernel stack trace just for that. As it's a normal error condition, let's remove snd_BUG_ON() macro usage there. Reported-by: syzbot+2a59ee7a9831b264f45e@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312155730.7520-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit f2ecf903 upstream. Each OSS PCM plugins allocate its internal buffer per pre-calculation of the max buffer size through the chain of plugins (calling src_frames and dst_frames callbacks). This works for most plugins, but the rate plugin might behave incorrectly. The calculation in the rate plugin involves with the fractional position, i.e. it may vary depending on the input position. Since the buffer size pre-calculation is always done with the offset zero, it may return a shorter size than it might be; this may result in the out-of-bound access as spotted by fuzzer. This patch addresses those possible buffer overflow accesses by simply setting the upper limit per the given buffer size for each plugin before src_frames() and after dst_frames() calls. Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit 6c3171ef upstream. This is a similar bug like the previous case for virmidi: the invalid running status is kept after receiving a sysex message. Again the fix is to clear the running status after handling the sysex. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit 4384f167 upstream. The virmidi driver handles sysex event exceptionally in a short-cut snd_seq_dump_var_event() call, but this missed the reset of the running status. As a result, it may lead to an incomplete command right after the sysex when an event with the same running status was queued. Fix it by clearing the running status properly via alling snd_midi_event_reset_decode() for that code path. Reported-by:
Andreas Steinmetz <ast@domdv.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit d683469b upstream. The MIDI input event parser of the LINE6 driver may enter into an endless loop when the unexpected data sequence is given, as it tries to continue the secondary bytes without termination. Also, when the input data is too short, the parser returns a negative error, while the caller doesn't handle it properly. This would lead to the unexpected behavior as well. This patch addresses those issues by checking the return value correctly and handling the one-byte event in the parser properly. The bug was reported by syzkaller. Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.deSigned-off-by:
-
Scott Chen authored
commit cecc113c upstream. Add a device id for HP LD381 Display LD381: 03f0:0f7f Signed-off-by:
Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Ran Wang authored
commit b433e340 upstream. When loading new kernel via kexec, we need to shutdown host controller to avoid any un-expected memory accessing during new kernel boot. Signed-off-by:
Ran Wang <ran.wang_1@nxp.com> Cc: stable <stable@vger.kernel.org> Tested-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200306092328.41253-1-ran.wang_1@nxp.comSigned-off-by:
-
Daniele Palmas authored
commit 8e852a79 upstream. Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20200304104310.2938-1-dnlplm@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 75d7676e upstream. We have been receiving bug reports that ethernet connections over RTL8153 based ethernet adapters stops working after a while with errors like these showing up in dmesg when the ethernet stops working: [12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout [12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout [12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1 docks and with generic USB to ethernet dongles using the RTL8153 chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to the kernel commandline and all users who have tried this report that this fixes this. Also note that we already have an existing NO_LPM quirk for the RTL8153 used in the Microsoft Surface Dock (where it uses a different usb-id). This commit adds a NO_LPM quirk for the generic Realtek RTL8153 0bda:8153 usb-id, fixing the Tx timeout errors on these devices. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931 Cc: stable@vger.kernel.org Cc: russianneuromancer@ya.ru Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.comSigned-off-by:
-
Kai-Heng Feng authored
commit b63e48fb upstream. Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the bus when bringing underlying ports from U3 to U0. Disabling LPM on the hub during setting link state is not enough, so let's disable LPM completely for this hub. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200205112633.25995-3-kai.heng.feng@canonical.comSigned-off-by:
-
Daniel Axtens authored
[ Upstream commit 3745488e ] altera_get_note is called from altera_init, where key is kzalloc(33). When the allocation functions are annotated to allow the compiler to see the sizes of objects, and with FORTIFY_SOURCE, we see: In file included from drivers/misc/altera-stapl/altera.c:14:0: In function ‘strlcpy’, inlined from ‘altera_init’ at drivers/misc/altera-stapl/altera.c:2189:5: include/linux/string.h:378:4: error: call to ‘__write_overflow’ declared with attribute error: detected write beyond size of object passed as 1st parameter __write_overflow(); ^~~~~~~~~~~~~~~~~~ That refers to this code in altera_get_note: if (key != NULL) strlcpy(key, &p[note_strings + get_unaligned_be32( &p[note_table + (8 * i)])], length); The error triggers because the length of 'key' is 33, but the copy uses length supplied as the 'length' parameter, which is always 256. Split the size parameter into key_len and val_len, and use the appropriate length depending on what is being copied. Detected by compiler error, only compile-tested. Cc: "Igor M. Liplianin" <liplianin@netup.ru> Signed-off-by:
Daniel Axtens <dja@axtens.net> Link: https://lore.kernel.org/r/20200120074344.504-2-dja@axtens.netSigned-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/202002251042.D898E67AC@keescookSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Szyprowski authored
[ Upstream commit c0fd99d6 ] Writing to the built-in strings arrays doesn't work if driver is loaded as kernel module. This is also considered as a bad pattern. Fix this by adding a call to clk_get() with legacy clock name. This fixes following kernel oops if driver is loaded as module: Unable to handle kernel paging request at virtual address bf047978 pgd = (ptrval) [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f Internal error: Oops: 80f [#1] SMP ARM Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326 videodev: Linux video capture interface: v2.00 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm] LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm] ... Process systemd-udevd (pid: 212, stack limit = 0x(ptrval)) ... [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4) [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350) [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0) [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60) [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc) [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4) [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8) [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110) [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm]) [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220) [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210) [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310) [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc) [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xd979bfa8 to 0xd979bff0) ... ---[ end trace db16efe05faab470 ]--- Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 0a9d1e3f ] Properly propagate error value from devm_regulator_bulk_get() and don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Thommy Jakobsson authored
[ Upstream commit 5dd83049 ] In the public interface for chipselect, there is always an entry commented as "Dummy generic FIFO entry" pushed down to the fifo right after the activate/deactivate command. The dummy entry is 0x0, irregardless if the intention was to activate or deactive the cs. This causes the cs line to glitch rather than beeing activated in the case when there was an activate command. This has been observed on oscilloscope, and have caused problems for at least one specific flash device type connected to the qspi port. After the change the glitch is gone and cs goes active when intended. The reason why this worked before (except for the glitch) was because when sending the actual data, the CS bits are once again set. Since most flashes uses mode 0, there is always a half clk period anyway for cs to clk active setup time. If someone would rely on timing from a chip_select call to a transfer_one, it would fail though. It is unknown why the dummy entry was there in the first place, git log seems to be of no help in this case. The reference manual gives no indication of the necessity of this. In fact the lower 8 bits are a setup (or hold in case of deactivate) time expressed in cycles. So this should not be needed to fulfill any setup/hold timings. Signed-off-by:
Thommy Jakobsson <thommyj@gmail.com> Reviewed-by:
Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Link: https://lore.kernel.org/r/20200224162643.29102-1-thommyj@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit 27f13774 ] 'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI devices not described in the DT. Certain DRA7 platforms (e.g., DRA76) has RAM above 32-bit boundary (accessible with LPAE config) though the PCIe bridge will be able to access only 32-bits. Add 'dma-ranges' property in PCIe RC DT nodes to indicate the host bridge can access only 32 bits. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Naveen N. Rao authored
[ Upstream commit cb0cc635 ] Selecting CONFIG_DEBUG_INFO_BTF results in the below warning from ld: ld: warning: orphan section `.BTF' from `.btf.vmlinux.bin.o' being placed in section `.BTF' Include .BTF section in vmlinux explicitly to fix the same. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200220113132.857132-1-naveen.n.rao@linux.vnet.ibm.comSigned-off-by:
-
Yuji Sasaki authored
[ Upstream commit 136b5cd2 ] spi_qup_suspend() will cause synchronous external abort when runtime suspend is enabled and applied, as it tries to access SPI controller register while clock is already disabled in spi_qup_pm_suspend_runtime(). Signed-off-by:
Yuji sasaki <sasakiy@chromium.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200214074340.2286170-1-vkoul@kernel.orgSigned-off-by:
-
- 20 Mar, 2020 15 commits
-
-
Greg Kroah-Hartman authored
-
Matteo Croce authored
commit 3e72dfdf upstream. Similarly to commit c543cb4a ("ipv4: ensure rcu_read_lock() in ipv4_link_failure()"), __ip_options_compile() must be called under rcu protection. Fixes: 3da1ed7a ("net: avoid use IPCB in cipso_v4_error") Suggested-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
Matteo Croce <mcroce@redhat.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jann Horn authored
commit fd4d9c7d upstream. When kmem_cache_alloc_bulk() attempts to allocate N objects from a percpu freelist of length M, and N > M > 0, it will first remove the M elements from the percpu freelist, then call ___slab_alloc() to allocate the next element and repopulate the percpu freelist. ___slab_alloc() can re-enable IRQs via allocate_slab(), so the TID must be bumped before ___slab_alloc() to properly commit the freelist head change. Fix it by unconditionally bumping c->tid when entering the slowpath. Cc: stable@vger.kernel.org Fixes: ebe909e0 ("slub: improve bulk alloc strategy") Signed-off-by:
-
Kees Cook authored
commit f87b1c49 upstream. When the uaccess .fixup section was renamed to .text.fixup, one case was missed. Under ld.bfd, the orphaned section was moved close to .text (since they share the "ax" bits), so things would work normally on uaccess faults. Under ld.lld, the orphaned section was placed outside the .text section, making it unreachable. Link: https://github.com/ClangBuiltLinux/linux/issues/282 Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1020633#c44 Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.1912032147340.17114@knanqh.ubzr Link: https://lore.kernel.org/lkml/202002071754.F5F073F1D@keescook/ Fixes: c4a84ae3 ("ARM: 8322/1: keep .text and .fixup regions closer together") Cc: stable@vger.kernel.org Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Florian Fainelli authored
commit 45939ce2 upstream. It is possible for a system with an ARMv8 timer to run a 32-bit kernel. When this happens we will unconditionally have the vDSO code remove the __vdso_gettimeofday and __vdso_clock_gettime symbols because cntvct_functional() returns false since it does not match that compatibility string. Fixes: ecf99a43 ("ARM: 8331/1: VDSO initialization, mapping, and synchronization") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 6c5d9112 ] journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit fda31c50 ] When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by:
Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Madhuparna Bhowmik authored
[ Upstream commit 253216ff ] local->sta_mtx is held in __ieee80211_check_fast_rx_iface(). No need to use list_for_each_entry_rcu() as it also requires a cond argument to avoid false lockdep warnings when not used in RCU read-side section (with CONFIG_PROVE_RCU_LIST). Therefore use list_for_each_entry(); Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200223143302.15390-1-madhuparnabhowmik10@gmail.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit 44343418 ] The KS8851 requires that packet RX and TX are mutually exclusive. Currently, the driver hopes to achieve this by disabling interrupt from the card by writing the card registers and by disabling the interrupt on the interrupt controller. This however is racy on SMP. Replace this approach by expanding the spinlock used around the ks_start_xmit() TX path to ks_irq() RX path to assure true mutual exclusion and remove the interrupt enabling/disabling, which is now not needed anymore. Furthermore, disable interrupts also in ks_net_stop(), which was missing before. Note that a massive improvement here would be to re-use the KS8851 driver approach, which is to move the TX path into a worker thread, interrupt handling to threaded interrupt, and synchronize everything with mutexes, but that would be a much bigger rework, for a separate patch. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit a7ee7d44 ] We may end up with a NULL reg_rule after the loop in handle_channel_custom() if the bandwidth didn't fit, check if this is the case and bail out if so. Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit be0aba82 ] The Surfbook E11B uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. BugLink: https://bugs.launchpad.net/bugs/1858299Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Mansour Behabadi authored
[ Upstream commit e433be92 ] Magic Keyboards with more recent firmware (0x0100) report Fn key differently. Without this patch, Fn key may not behave as expected and may not be configurable via hid_apple fnmode module parameter. Signed-off-by:
Mansour Behabadi <mansour@oxplot.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jean Delvare authored
[ Upstream commit 3f9e12e0 ] In case the WDAT interface is broken, give the user an option to ignore it to let a native driver bind to the watchdog device instead. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Kim Phillips authored
[ Upstream commit f967140d ] Enable the sampling check in kernel/events/core.c::perf_event_open(), which returns the more appropriate -EOPNOTSUPP. BEFORE: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (l3_request_g1.caching_l3_cache_accesses). /bin/dmesg | grep -i perf may provide additional information. With nothing relevant in dmesg. AFTER: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: l3_request_g1.caching_l3_cache_accesses: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fixes: c43ca509 ("perf/x86/amd: Add support for AMD NB and L2I "uncore" counters") Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200311191323.13124-1-kim.phillips@amd.comSigned-off-by:
-
Sven Eckelmann authored
commit f4156f96 upstream. The announcement messages of batman-adv COMPAT_VERSION 15 have the possibility to announce additional information via a dynamic TVLV part. This part is optional for the ELP packets and currently not parsed by the Linux implementation. Still out-of-tree versions are using it to transport things like neighbor hashes to optimize the rebroadcast behavior. Since the ELP broadcast packets are smaller than the minimal ethernet packet, it often has to be padded. This is often done (as specified in RFC894) with octets of zero and thus work perfectly fine with the TVLV part (making it a zero length and thus empty). But not all ethernet compatible hardware seems to follow this advice. To avoid ambiguous situations when parsing the TVLV header, just force the 4 bytes (TVLV length + padding) after the required ELP header to zero. Fixes: d6f94d91 ("batman-adv: ELP - adding basic infrastructure") Reported-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
