- 03 Jun, 2007 1 commit
-
-
Stephen Hemminger authored
Reading the code for ql_hw_csum_setup(), it is obvious that this driver is broken for IPV6. The driver sets the NETIF_F_HW_SUM flag, but the code for checksum setup only deals with IPV4. Compile tested only, no hardware available. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
- 01 Jun, 2007 39 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: Install firewire-constants.h and firewire-cdev.h for userspace. firewire: Change struct fw_cdev_iso_packet to not use bitfields. firewire: Implement suspend/resume PCI driver hooks. firewire: add to MAINTAINERS firewire: fw-sbp2: implement sysfs ieee1394_id ieee1394: sbp2: offer SAM-conforming target port ID in sysfs ieee1394: fix calculation of sysfs attribute "address"
-
Ingo Molnar authored
Make timer-stats have almost zero overhead when enabled in the config but not used. (this way distros can enable it more easily) Also update the documentation about overhead of timer_stats - it was written for the first version which had a global lock and a linear list walk based lookup ;-) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bjorn Steinbrink authored
Fix two races in the timer stats lookup code. One by ensuring that the initialization of a new entry is finished upon insertion of that entry. The other by cleaning up the hash table when the entries array is cleared, so that we don't have any "pre-inserted" entries. Thanks to Eric Dumazet for reminding me of the memory barriers. Signed-off-by:
Bjorn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by:
Ian Kumlien <pomac@vapor.com> Acked-by:
-
Sam Ravnborg authored
Fix following section mismatch warning in hp100: WARNING: drivers/net/hp100.o(.init.text+0x26a): Section mismatch: reference to .exit.text: (after 'init_module') The warning says that we use a function marked __exit from a function marked __init. This is not good on architectures where we discard __exit section for drivers that are built-in. Note: This warning is only seen by my local copy of modpost but the change will soon hit upstream. Signed-off-by:Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Sam Ravnborg authored
Fix following section mismatch warning in kvm-intel.o: WARNING: o-i386/drivers/kvm/kvm-intel.o(.init.text+0xbd): Section mismatch: reference to .exit.text: (between 'hardware_setup' and 'vmx_disabled_by_bios') The function free_kvm_area is used in the function alloc_kvm_area which is marked __init. The __exit area is discarded by some archs during link-time if a module is built-in resulting in an oops. Note: This warning is only seen by my local copy of modpost but the change will soon hit upstream. Signed-off-by: -
Sam Ravnborg authored
Fix following section mismatch warnings in acpi WARNING: drivers/acpi/asus_acpi.o(.init.text+0xb7): Section mismatch: reference to .exit.text: (after 'init_module') WARNING: o-i386/drivers/acpi/toshiba_acpi.o(.init.text+0x13a): Section mismatch: reference to .exit.text: (after 'init_module') The exit function is used in the init function during an error codition. As __exit may be discarded during link-time / run-time this is no good. Do not mark the exit function __exit. Note: This warning is only seen by my local copy of modpost but the change will soon hit upstream. Signed-off-by: -
Sam Ravnborg authored
Fix the following section mismatch warnings: WARNING: drivers/isdn/hardware/eicon/divadidd.o(.init.text+0xc4): Section mismatch: reference to .exit.text: (between 'init_module' and 'diddfunc_init') WARNING: drivers/isdn/hardware/eicon/divas.o(.init.text+0xf4): Section mismatch: reference to .exit.text:divasfunc_exit (between 'init_module' and 'divasfunc_init') WARNING: drivers/isdn/hardware/eicon/divas.o(.init.text+0x10d): Section mismatch: reference to .exit.text:divasfunc_exit (between 'init_module' and 'divasfunc_init') WARNING: drivers/isdn/hardware/eicon/divas.o(.init.text+0x148): Section mismatch: reference to .exit.text:divasfunc_exit (between 'init_module' and 'divasfunc_init') They all point to situation whare a function marked __init calls a function marked __exit - but the __exit section may have been discarded. Note: This warning is generated by a modified copy of modpost in my tree. It will soon hit upstearm. Signed-off-by: -
Sam Ravnborg authored
Fix the following section mismatch warnings in microcode.c: WARNING: arch/i386/kernel/built-in.o(.init.text+0x3966): Section mismatch: reference to .exit.text: (between 'microcode_init' and 'parse_maxcpus') WARNING: arch/i386/kernel/built-in.o(.init.text+0x3992): Section mismatch: reference to .exit.text: (between 'microcode_init' and 'parse_maxcpus') The warning are caused by a function marked __init that calls a function marked __exit. Functions marked __exit may be discarded either during link or run-time and thus the reference is not good. Signed-off-by:
-
Krzysztof Helt authored
This patch correctly restores console state after switching from X. Otherwise, screen is always off after switching from X. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Christoph Lameter authored
Hotplug callbacks are performed with interrupts enabled. Slub requires interrupts to be disabled for flushing caches. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Andrea Paterniani authored
Fix 2 bugs: - SPI_DMA_RHDMA bad value. - Missing return value in setup() function (lost passing from patch-2.6.20-rc4-spi_imx to patch-2.6.20-rc6-spi_imx). Signed-off-by:
Andrea Paterniani <a.paterniani@swapp-eng.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Maciej W. Rozycki authored
The <linux/serial_core.h> header refers to handle_sysrq(), but does not include <linux/sysrq.h> which provides a declaration of the function. This may result in an implicit declaration and a warning if the actual one is seen later on. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Satoru Takeuchi authored
Add comment for errnos related to restart syscall to avoid the leakage of them to user programs. Signed-off-by:
Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Jay Estabrook authored
1. arch/alpha/Kconfig several adjustments: a) additions to the systems list and cleanup of same b) change limits of NR_CPUS and make dep. on platform Note that MARVEL support is limited to 32 CPUs whan using 42-bit KSEG - one needs 48-bit KSEG to handle up to 64, and we've never supported 48-bit KSEG. 2. include/asm-alpha/core_wildfire.h fix a typo that undoubtedly prevents WILDFIRE support from working Signed-off-by:Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by:
-
Jay Estabrook authored
This code corrects the behavior of the t2_readX/t2_writeX routines, and t2_ioreadNN/t2_iowriteNN routines. The value T2_DENSE_MEM is now subtracted from the "xaddr" argument in each of the readX/writeX routines, since those routines may be called directly, rather than always through the ioreadNN/iowriteNN routines. Examples of the direct calls, via the __raw_readX/writeX macros, are the memcpy_fromio/toio, _memset_c_io, and scr_memcpyw routines. Signed-off-by:
Jay Estabrook <jay.estabrook@hp.com> Signed-off-by:
-
Jay Estabrook authored
This code replaces earlier and incomplete handling of graphics on non-zero PCI domains (aka hoses or peer PCI buses). An option (CONFIG_VGA_HOSE) is set TRUE if configuring a GENERIC kernel, or a kernel for MARVEL, TITAN, or TSUNAMI machines, as these are the machines whose SRM consoles are capable of configuring and handling graphics options on non-zero hoses. All other machines have the option set FALSE. A routine, "find_console_vga_hose()", is used to find the graphics device which the machine's firmware believes is the console device, and it sets a global (pci_vga_hose) for later use in managing access to the device. This is called in "init_arch" on TITAN and TSUNAMI machines; MARVEL machines use a custom version of this routine because of extra complexity. A routine, "locate_and_init_vga()", is used to find the graphics device and set a global (pci_vga_hose) for later use in managing access to the device, in the case where "find_console_vga_hose" has failed. Various adjustments are made to the ioremap and ioportmap routines for detecting and translating "legacy" VGA register and memory references to the real PCI domain. [akpm@linux-foundation.org: don't statically init bss] [akpm@linux-foundation.org: build fix] Signed-off-by:
-
Yoshinori Sato authored
- warning fix. - call trace area check fix. - There is no meaning, ' & ' it deletes Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Haavard Skinnemoen authored
When either rx_buf or tx_buf is not being used, i.e. for plain read- or write operations, the atmel_spi uses a fixed-size DMA buffer instead. If the transfer is longer than the size of this buffer, it is split into multiple DMA transfers. When the transfer is split like this, the atmel_spi driver ends up using the same DMA address again and again even for the buffer that came from the user, which is of course wrong. Fix this by adding the number of bytes already transferred to the DMA address so that the data ends up in the right place. Thanks to Wu Xuan for discovering this bug. Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Luis R. Rodriguez authored
Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by:
-
Karsten Keil authored
I noticed that CLIR (aka "hide your calling number") in isdn_tty is broken: The at-command parser filters out the required "R" (e.g. ATDR089123456) It's been broken for a *very* long time. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
Matthias Goebl <matthias.goebl@goebl.net> Signed-off-by:
-
Tilman Schmidt authored
According to the definitions recently posted on LKML, the maturity label for the ISDN4Linux subsystem is wrong. This patch corrects it and also clarifies the accompanying help text a bit. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Acked-by:
-
Oleg Nesterov authored
Spotted by Satoru Takeuchi. kill_pgrp(task_pgrp(current)) sends the signal to the current's thread group, but can choose any sub-thread as a target for signal_wake_up(). This means that job_control() and tty_check_change() may return -ERESTARTSYS without signal_pending(). Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: Roland McGrath <roland@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by:
-
Yasunori Goto authored
zone->present_pages is updated in online_pages(). But, __add_zone() can be called twice or more before calling online_pages(). So, init_currenty_empty_zone() can be called unnecessary times. It is cause of memory leak of zone's wait_table. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Matthew Garrett authored
Intel Macs (and possibly other machines) provide a PNP entry for the RTC, but provide no IRQ. As a result the rtc-cmos driver doesn't allow wakeup alarms. If the RTC is located at the legacy ioport range, assume that it's on IRQ 8 unless the tables say otherwise. Signed-off-by:
Matthew Garrett <mjg59@srcf.ucam.org> Cc: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by:
-
Pekka Enberg authored
Adds instructions how to use GDB to figure out the exact location of an OOPS to Documentation/BUG-HUNTING. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Andy Whitcroft authored
We are seeing increasing levels of minor patch style violations in submissions to the mailing lists as well as making it into the tree. These detract from the quality of the submission and cause unnessary work for reviewers. As a first step package up the current state of the patch style checker and include it in the kernel tree. Add instructions suggesting running it on submissions. This adds version v0.01 of the checkpatch.pl script. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
Joel Schopp <jschopp@austin.ibm.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
-
Geert Uytterhoeven authored
Move the forward declaration of fb_class from drivers/video/console/fbcon.h to <linux/fb.h>, together with the other forward declarations related to drivers/video/fbmem.c. This kills the following sparse warning: | drivers/video/fbmem.c:1363:14: warning: symbol 'fb_class' was not declared. Should it be static? Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Avuton Olrich authored
Because the framebuffer memory is allocated system RAM, use the sys_ drawing libraries. It also fixes the following compile error: LD .tmp_vmlinux1 drivers/built-in.o:(.data+0x8b48): undefined reference to `cfb_fillrect' drivers/built-in.o:(.data+0x8b50): undefined reference to `cfb_copyarea' drivers/built-in.o:(.data+0x8b58): undefined reference to `cfb_imageblit' [adaplas] Use fb_sys_read/write for the same reasons as above. Signed-off-by:
Avuton Olrich <avuton@gmail.com> Signed-off-by:
-
Ondrej Zajicek authored
This patch prevents null pointer dereference in arkfb and vt8623fb. Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by:
-
Krzysztof Helt authored
This patch fixes wrong ifdef around the xxxfb_setup. It also moves this function to remove forward declaration. Signed-off-by:
-
Ulrich Drepper authored
When the private futex support was added the compat code wasn't changed. The result is that code using compat code which fail, e.g., because the timeout values are not correctly passed. The following patch should fix that. Signed-off-by:
Ulrich Drepper <drepper@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Tim Gardner authored
Force Dell E520 to use the BIOS to shutdown/reboot. I have at least one report that this patch fixes shutdown/reboot problems on the Dell E520 platform. (Andi says: People can always set the boot option. It hardly seems like a critical issue needing a backport.) Signed-off-by:
Tim Gardner <tim.gardner@ubuntu.com> Acked-by:
Andi Kleen <ak@suse.de> Acked-by:
Matt Domsch <Matt_Domsch@dell.com> Cc: <stable@kernel.org> Signed-off-by:
-
Chris Wright authored
Chuck reports that the recent fix from Andi to oprofile 6c977aad introduces a double free. Each cpu's cpu_msrs is setup to point to cpu 0's, which causes free_msrs to free cpu 0's pointers for_each_possible_cpu. Rather than copy the pointers, do a deep copy instead. [acme@redhat.com: allocate_msrs() was using for_each_online_cpu()] Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Cc: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jason Gaston authored
This patch updates the Intel ICH9M LPC Controller DID's, due to a specification change. Signed-off-by:
Jason Gaston <jason.d.gaston@intel.com> Cc: <stable@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Yoann Padioleau authored
Fix various bits of obviously-busted code which we're not happening to compile, due to ifdefs. Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Jan Kara <jack@ucw.cz> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
-
Yoann Padioleau authored
I have made a tool to parse the kernel that does not pre-process the source. That means that my parser tries to parse all the code, including code in the #else branch or code that is not often compiled because the driver is not very used (or not used at all). So, my parser sometimes reports parse error not originally detected by gcc. Here is my (first) patch. [akpm@linux-foundation.org: fix amd8111e.c] Signed-off-by:
Yoann Padioleau <padator@wanadoo.fr> Acked-by:
Matthew Wilcox <matthew@wil.cx> Acked-by:
Wim Van Sebroeck <wim@iguana.be> Acked-by:
David Woodhouse <dwmw2@infradead.org> Acked-by:
James Bottomley <James.Bottomley@steeleye.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Eric W. Biederman authored
With these two lines in the reverse order the drives/block/ccis.c was oopsing in msi_free_irqs. Silly us calling writel on an area after we unmap it. BUG: unable to handle kernel paging request at virtual address f8b2200c printing eip: c01e9cc7 *pdpt = 0000000000003001 *pde = 0000000037e48067 *pte = 0000000000000000 Oops: 0002 [#1] SMP Modules linked in: cciss ipv6 parport_pc lp parport autofs4 i2c_dev i2c_core sunrpc loop dm_multipath button battery asus_acpi ac tg3 floppy sg dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod ata_piix libata mptsas scsi_transport_sas mptspi scsi_transport_spi mptscsih mptbase sd_mod scsi_mod CPU: 1 EIP: 0060:[<c01e9cc7>] Not tainted VLI EFLAGS: 00010286 (2.6.22-rc2-gd2579053 #1) EIP is at msi_free_irqs+0x81/0xbe eax: f8b22000 ebx: f71f3180 ecx: f7fff280 edx: c1886eb8 esi: f7c4e800 edi: f7c4ec48 ebp: 00000002 esp: f5a0dec8 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process rmmod (pid: 5286, ti=f5a0d000 task=c47d2550 task.ti=f5a0d000) Stack: 00000002 f8b72294 00000400 f8b69ca7 f8b6bc6c 00000002 00000000 00000000 00000000 00000000 00000000 f5a997f4 f8b69d61 f7c5a4b0 f7c4e848 f7c4e848 f7c4e800 f7c4e800 f8b72294 f7c4e848 f8b72294 c01e3cdf f7c4e848 c024c469 Call Trace: [<f8b69ca7>] cciss_shutdown+0xae/0xc3 [cciss] [<f8b69d61>] cciss_remove_one+0xa5/0x178 [cciss] [<c01e3cdf>] pci_device_remove+0x16/0x35 [<c024c469>] __device_release_driver+0x71/0x8e [<c024c56e>] driver_detach+0xa0/0xde [<c024bc5c>] bus_remove_driver+0x27/0x41 [<c01e3ef3>] pci_unregister_driver+0xb/0x13 [<f8b6a343>] cciss_cleanup+0xf/0x51 [cciss] [<c0139ced>] sys_delete_module+0x110/0x135 [<c0104c7a>] sysenter_past_esp+0x5f/0x85 Here's a patch that just reverses the 2 lines of code as Eric suggests. Please consider this for inclusion. Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
Chase Maupin <chase.maupin@hp.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Eric W. Biederman authored
"Mike Miller (OS Dev)" <mikem@beardog.cca.cpqcorp.net> writes: Found what seems the problem with our vectors being listed backward. In drivers/pci/msi.c we should be using list_add_tail rather than list_add to preserve the ordering across various kernels. Please consider this for inclusion. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Cc: "Mike Miller (OS Dev)" <mikem@beardog.cca.cpqcorp.net> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
