1. 15 Feb, 2017 2 commits
  2. 14 Feb, 2017 15 commits
    • Eric Dumazet's avatar
      packet: fix races in fanout_add() · d199fab6
      Eric Dumazet authored
      Multiple threads can call fanout_add() at the same time.
      
      We need to grab fanout_mutex earlier to avoid races that could
      lead to one thread freeing po->rollover that was set by another thread.
      
      Do the same in fanout_release(), for peace of mind, and to help us
      finding lockdep issues earlier.
      
      Fixes: dc99f600 ("packet: Add fanout support.")
      Fixes: 0648ab70 ("packet: rollover prepare: per-socket state")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d199fab6
    • Thomas Falcon's avatar
      ibmvnic: Fix initial MTU settings · f39f0d1e
      Thomas Falcon authored
      In the current driver, the MTU is set to the maximum value
      capable for the backing device. This decision turned out to
      be a mistake as it led to confusion among users. The expected
      initial MTU value used for other IBM vNIC capable operating
      systems is 1500, with the maximum value (9000) reserved for
      when Jumbo frames are enabled. This patch sets the MTU to
      the default value for a net device.
      
      It also corrects a discrepancy between MTU values received from
      firmware, which includes the ethernet header length, and net
      device MTU values.
      
      Finally, it removes redundant min/max MTU assignments after device
      initialization.
      Signed-off-by: default avatarThomas Falcon <tlfalcon@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f39f0d1e
    • Ivan Khoronzhuk's avatar
      net: ethernet: ti: cpsw: fix cpsw assignment in resume · a60ced99
      Ivan Khoronzhuk authored
      There is a copy-paste error, which hides breaking of resume
      for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev)
      in suspend, but left it unchanged in resume.
      
      Fixes: 606f3993
      (ti: cpsw: move platform data and slaves info to cpsw_common)
      Reported-by: default avatarAlexey Starikovskiy <AStarikovskiy@topcon.com>
      Signed-off-by: default avatarIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a60ced99
    • WANG Cong's avatar
      kcm: fix a null pointer dereference in kcm_sendmsg() · cd27b96b
      WANG Cong authored
      In commit 98e3862c ("kcm: fix 0-length case for kcm_sendmsg()")
      I tried to avoid skb allocation for 0-length case, but missed
      a check for NULL pointer in the non EOR case.
      
      Fixes: 98e3862c ("kcm: fix 0-length case for kcm_sendmsg()")
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Cc: Tom Herbert <tom@herbertland.com>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Acked-by: default avatarTom Herbert <tom@herbertland.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd27b96b
    • Rui Sousa's avatar
      net: fec: fix multicast filtering hardware setup · 01f8902b
      Rui Sousa authored
      Fix hardware setup of multicast address hash:
      - Never clear the hardware hash (to avoid packet loss)
      - Construct the hash register values in software and then write once
      to hardware
      Signed-off-by: default avatarRui Sousa <rui.sousa@nxp.com>
      Signed-off-by: default avatarFugang Duan <fugang.duan@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      01f8902b
    • David S. Miller's avatar
      Merge branch 'ipv6-v4mapped' · 144adc65
      David S. Miller authored
      Jonathan T. Leighton says:
      
      ====================
      IPv4-mapped on wire, :: dst address issue
      
      Under some circumstances IPv6 datagrams are sent with IPv4-mapped IPv6
      addresses as the source. Given an IPv6 socket bound to an IPv4-mapped
      IPv6 address, and an IPv6 destination address, both TCP and UDP will
      will send packets using the IPv4-mapped IPv6 address as the source. Per
      RFC 6890 (Table 20), IPv4-mapped IPv6 source addresses are not allowed
      in an IP datagram. The problem can be observed by attempting to
      connect() either a TCP or UDP socket, or by using sendmsg() with a UDP
      socket. The patch is intended to correct this issue for all socket
      types.
      
      linux follows the BSD convention that an IPv6 destination address
      specified as in6addr_any is converted to the loopback address.
      Currently, neither TCP nor UDP consider the possibility that the source
      address is an IPv4-mapped IPv6 address, and assume that the appropriate
      loopback address is ::1. The patch adds a check on whether or not the
      source address is an IPv4-mapped IPv6 address and then sets the
      destination address to either ::ffff:127.0.0.1 or ::1, as appropriate.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      144adc65
    • Jonathan T. Leighton's avatar
      ipv6: Handle IPv4-mapped src to in6addr_any dst. · 052d2369
      Jonathan T. Leighton authored
      This patch adds a check on the type of the source address for the case
      where the destination address is in6addr_any. If the source is an
      IPv4-mapped IPv6 source address, the destination is changed to
      ::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This
      is done in three locations to handle UDP calls to either connect() or
      sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays
      handling an in6addr_any destination until very late, so the patch only
      needs to handle the case where the source is an IPv4-mapped IPv6
      address.
      Signed-off-by: default avatarJonathan T. Leighton <jtleight@udel.edu>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      052d2369
    • Jonathan T. Leighton's avatar
      ipv6: Inhibit IPv4-mapped src address on the wire. · ec5e3b0a
      Jonathan T. Leighton authored
      This patch adds a check for the problematic case of an IPv4-mapped IPv6
      source address and a destination address that is neither an IPv4-mapped
      IPv6 address nor in6addr_any, and returns an appropriate error. The
      check in done before returning from looking up the route.
      Signed-off-by: default avatarJonathan T. Leighton <jtleight@udel.edu>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ec5e3b0a
    • Or Gerlitz's avatar
      net/mlx5e: Disable preemption when doing TC statistics upcall · fed06ee8
      Or Gerlitz authored
      When called by HW offloading drivers, the TC action (e.g
      net/sched/act_mirred.c) code uses this_cpu logic, e.g
      
       _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets)
      
      per the kernel documention, preemption should be disabled, add that.
      
      Before the fix, when running with CONFIG_PREEMPT set, we get a
      
      BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793
      
      asserion from the TC action (mirred) stats_update callback.
      
      Fixes: aad7e08d ('net/mlx5e: Hardware offloaded flower filter statistics support')
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fed06ee8
    • David S. Miller's avatar
      Merge branch 'rhashtable-allocation-failure-during-insertion' · 0c8ef291
      David S. Miller authored
      Herbert Xu says:
      
      ====================
      rhashtable: Handle table allocation failure during insertion
      
      v2 -
      
      Added Ack to patch 2.
      Fixed RCU annotation in code path executed by rehasher by using
      rht_dereference_bucket.
      
      v1 -
      
      This series tackles the problem of table allocation failures during
      insertion.  The issue is that we cannot vmalloc during insertion.
      This series deals with this by introducing nested tables.
      
      The first two patches removes manual hash table walks which cannot
      work on a nested table.
      
      The final patch introduces nested tables.
      
      I've tested this with test_rhashtable and it appears to work.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0c8ef291
    • Herbert Xu's avatar
      rhashtable: Add nested tables · 40137906
      Herbert Xu authored
      This patch adds code that handles GFP_ATOMIC kmalloc failure on
      insertion.  As we cannot use vmalloc, we solve it by making our
      hash table nested.  That is, we allocate single pages at each level
      and reach our desired table size by nesting them.
      
      When a nested table is created, only a single page is allocated
      at the top-level.  Lower levels are allocated on demand during
      insertion.  Therefore for each insertion to succeed, only two
      (non-consecutive) pages are needed.
      
      After a nested table is created, a rehash will be scheduled in
      order to switch to a vmalloced table as soon as possible.  Also,
      the rehash code will never rehash into a nested table.  If we
      detect a nested table during a rehash, the rehash will be aborted
      and a new rehash will be scheduled.
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      40137906
    • Herbert Xu's avatar
      tipc: Fix tipc_sk_reinit race conditions · 9dbbfb0a
      Herbert Xu authored
      There are two problems with the function tipc_sk_reinit.  Firstly
      it's doing a manual walk over an rhashtable.  This is broken as
      an rhashtable can be resized and if you manually walk over it
      during a resize then you may miss entries.
      
      Secondly it's missing memory barriers as previously the code used
      spinlocks which provide the barriers implicitly.
      
      This patch fixes both problems.
      
      Fixes: 07f6c4bc ("tipc: convert tipc reference table to...")
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9dbbfb0a
    • Herbert Xu's avatar
      gfs2: Use rhashtable walk interface in glock_hash_walk · 6a254780
      Herbert Xu authored
      The function glock_hash_walk walks the rhashtable by hand.  This
      is broken because if it catches the hash table in the middle of
      a rehash, then it will miss entries.
      
      This patch replaces the manual walk by using the rhashtable walk
      interface.
      
      Fixes: 88ffbf3e ("GFS2: Use resizable hash table for glocks")
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6a254780
    • Ralf Baechle's avatar
      NET: Fix /proc/net/arp for AX.25 · 4872e57c
      Ralf Baechle authored
      When sending ARP requests over AX.25 links the hwaddress in the neighbour
      cache are not getting initialized.  For such an incomplete arp entry
      ax2asc2 will generate an empty string resulting in /proc/net/arp output
      like the following:
      
      $ cat /proc/net/arp
      IP address       HW type     Flags       HW address            Mask     Device
      192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3
      172.20.1.99      0x3         0x0              *        bpq0
      
      The missing field will confuse the procfs parsing of arp(8) resulting in
      incorrect output for the device such as the following:
      
      $ arp
      Address                  HWtype  HWaddress           Flags Mask            Iface
      gateway                  ether   52:54:00:00:5d:5f   C                     ens3
      172.20.1.99                      (incomplete)                              ens3
      
      This changes the content of /proc/net/arp to:
      
      $ cat /proc/net/arp
      IP address       HW type     Flags       HW address            Mask     Device
      172.20.1.99      0x3         0x0         *                     *        bpq0
      192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3
      
      To do so it change ax2asc to put the string "*" in buf for a NULL address
      argument.  Finally the HW address field is left aligned in a 17 character
      field (the length of an ethernet HW address in the usual hex notation) for
      readability.
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4872e57c
    • Mart van Santen's avatar
      xen-netback: vif counters from int/long to u64 · ebf692f8
      Mart van Santen authored
      This patch fixes an issue where the type of counters in the queue(s)
      and interface are not in sync (queue counters are int, interface
      counters are long), causing incorrect reporting of tx/rx values
      of the vif interface and unclear counter overflows.
      This patch sets both counters to the u64 type.
      Signed-off-by: default avatarMart van Santen <mart@greenhost.nl>
      Reviewed-by: default avatarPaul Durrant <paul.durrant@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ebf692f8
  3. 13 Feb, 2017 3 commits
  4. 12 Feb, 2017 2 commits
  5. 10 Feb, 2017 15 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 1ee18329
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) If the timing is wrong we can indefinitely stop generating new ipv6
          temporary addresses, from Marcus Huewe.
      
       2) Don't double free per-cpu stats in ipv6 SIT tunnel driver, from Cong
          Wang.
      
       3) Put protections in place so that AF_PACKET is not able to submit
          packets which don't even have a link level header to drivers. From
          Willem de Bruijn.
      
       4) Fix memory leaks in ipv4 and ipv6 multicast code, from Hangbin Liu.
      
       5) Don't use udp_ioctl() in l2tp code, UDP version expects a UDP socket
          and that doesn't go over very well when it is passed an L2TP one.
          Fix from Eric Dumazet.
      
       6) Don't crash on NULL pointer in phy_attach_direct(), from Florian
          Fainelli.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        l2tp: do not use udp_ioctl()
        xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()
        NET: mkiss: Fix panic
        net: hns: Fix the device being used for dma mapping during TX
        net: phy: Initialize mdio clock at probe function
        igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()
        xen-netfront: Improve error handling during initialization
        sierra_net: Skip validating irrelevant fields for IDLE LSIs
        sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications
        kcm: fix 0-length case for kcm_sendmsg()
        xen-netfront: Rework the fix for Rx stall during OOM and network stress
        net: phy: Fix PHY module checks and NULL deref in phy_attach_direct()
        net: thunderx: Fix PHY autoneg for SGMII QLM mode
        net: dsa: Do not destroy invalid network devices
        ping: fix a null pointer dereference
        packet: round up linear to header len
        net: introduce device min_header_len
        sit: fix a double free on error path
        lwtunnel: valid encap attr check should return 0 when lwtunnel is disabled
        ipv6: addrconf: fix generation of new temporary addresses
      1ee18329
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma · a9dbf5c8
      Linus Torvalds authored
      Pull rdma fixes from Doug Ledford:
       "Third round of -rc fixes for 4.10 kernel:
      
         - two security related issues in the rxe driver
      
         - one compile issue in the RDMA uapi header"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
        RDMA: Don't reference kernel private header from UAPI header
        IB/rxe: Fix mem_check_range integer overflow
        IB/rxe: Fix resid update
      a9dbf5c8
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · aca9fa0c
      Linus Torvalds authored
      Pull i2c bugfixes from Wolfram Sang:
       "Two bugfixes (proper IO mapping and use of mutex) for a driver feature
        we introduced in this cycle"
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: piix4: Request the SMBUS semaphore inside the mutex
        i2c: piix4: Fix request_region size
      aca9fa0c
    • Linus Torvalds's avatar
      Merge tag 'mmc-v4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc · fc6f41ba
      Linus Torvalds authored
      Pull MMC host fix from Ulf Hansson:
       "mmci: Fix hang while waiting for busy-end interrupt"
      
      * tag 'mmc-v4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
        mmc: mmci: avoid clearing ST Micro busy end interrupt mistakenly
      fc6f41ba
    • Linus Torvalds's avatar
      Merge tag 'sound-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 1f369d16
      Linus Torvalds authored
      Pull sound fixes from Takashi Iwai:
       "Here are some last-minute fixes: two fixes for races in ALSA sequencer
        queue spotted by syzkaller, a revert for a regression of LINE6 driver
        (since 4.9), and a trivial new codec ID addition for Nvidia HDMI"
      
      * tag 'sound-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
        ALSA: hda - adding a new NV HDMI/DP codec ID in the driver
        ALSA: seq: Fix race at creating a queue
        Revert "ALSA: line6: Only determine control port properties if needed"
        ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
      1f369d16
    • Linus Torvalds's avatar
      Merge tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linux · 7fe654dc
      Linus Torvalds authored
      Pull nfsd revert from Bruce Fields:
       "This patch turned out to have a couple problems. The problems are
        fixable, but at least one of the fixes is a little ugly. The original
        bug has always been there, so we can wait another week or two to get
        this right"
      
      * tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linux:
        nfsd: Revert "nfsd: special case truncates some more"
      7fe654dc
    • Linus Torvalds's avatar
      Merge tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · 3ebc7033
      Linus Torvalds authored
      Pull powerpc fixes friom Michael Ellerman:
       "Apologies for the late pull request, but Ben has been busy finding bugs.
      
         - Userspace was semi-randomly segfaulting on radix due to us
           incorrectly handling a fault triggered by autonuma, caused by a
           patch we merged earlier in v4.10 to prevent the kernel executing
           userspace.
      
         - We weren't marking host IPIs properly for KVM in the OPAL ICP
           backend.
      
         - The ERAT flushing on radix was missing an isync and was incorrectly
           marked as DD1 only.
      
         - The powernv CPU hotplug code was missing a wakeup type and failing
           to flush the interrupt correctly when using OPAL ICP
      
        Thanks to Benjamin Herrenschmidt"
      
      * tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
        powerpc/powernv: Properly set "host-ipi" on IPIs
        powerpc/powernv: Fix CPU hotplug to handle waking on HVI
        powerpc/mm/radix: Update ERAT flushes when invalidating TLB
        powerpc/mm: Fix spurrious segfaults on radix with autonuma
      3ebc7033
    • Eric Dumazet's avatar
      l2tp: do not use udp_ioctl() · 72fb96e7
      Eric Dumazet authored
      udp_ioctl(), as its name suggests, is used by UDP protocols,
      but is also used by L2TP :(
      
      L2TP should use its own handler, because it really does not
      look the same.
      
      SIOCINQ for instance should not assume UDP checksum or headers.
      
      Thanks to Andrey and syzkaller team for providing the report
      and a nice reproducer.
      
      While crashes only happen on recent kernels (after commit
      7c13f97f ("udp: do fwd memory scheduling on dequeue")), this
      probably needs to be backported to older kernels.
      
      Fixes: 7c13f97f ("udp: do fwd memory scheduling on dequeue")
      Fixes: 85584672 ("udp: Fix udp_poll() and ioctl()")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      72fb96e7
    • Boris Ostrovsky's avatar
      xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend() · 74470954
      Boris Ostrovsky authored
      rx_refill_timer should be deleted as soon as we disconnect from the
      backend since otherwise it is possible for the timer to go off before
      we get to xennet_destroy_queues(). If this happens we may dereference
      queue->rx.sring which is set to NULL in xennet_disconnect_backend().
      Signed-off-by: default avatarBoris Ostrovsky <boris.ostrovsky@oracle.com>
      CC: stable@vger.kernel.org
      Reviewed-by: default avatarJuergen Gross <jgross@suse.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      74470954
    • Ralf Baechle's avatar
      NET: mkiss: Fix panic · 7ba1b689
      Ralf Baechle authored
      If a USB-to-serial adapter is unplugged, the driver re-initializes, with
      dev->hard_header_len and dev->addr_len set to zero, instead of the correct
      values.  If then a packet is sent through the half-dead interface, the
      kernel will panic due to running out of headroom in the skb when pushing
      for the AX.25 headers resulting in this panic:
      
      [<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50)
      [<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25])
      [<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss])
      [<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8)
      [<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914)
      [<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0)
      [<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48)
      
      This patch makes mkiss behave like the 6pack driver. 6pack does not
      panic.  In 6pack.c sp_setup() (same function name here) the values for
      dev->hard_header_len and dev->addr_len are set to the same values as in
      my mkiss patch.
      
      [ralf@linux-mips.org: Massages original submission to conform to the usual
      standards for patch submissions.]
      Signed-off-by: default avatarThomas Osterried <thomas@osterried.de>
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7ba1b689
    • Kejian Yan's avatar
      net: hns: Fix the device being used for dma mapping during TX · b85ea006
      Kejian Yan authored
      This patch fixes the device being used to DMA map skb->data.
      Erroneous device assignment causes the crash when SMMU is enabled.
      This happens during TX since buffer gets DMA mapped with device
      correspondign to net_device and gets unmapped using the device
      related to DSAF.
      Signed-off-by: default avatarKejian Yan <yankejian@huawei.com>
      Reviewed-by: default avatarYisen Zhuang <yisen.zhuang@huawei.com>
      Signed-off-by: default avatarSalil Mehta <salil.mehta@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b85ea006
    • J. Bruce Fields's avatar
      nfsd: Revert "nfsd: special case truncates some more" · 0839ffb8
      J. Bruce Fields authored
      This patch incorrectly attempted nested mnt_want_write, and incorrectly
      disabled nfsd's owner override for truncate.  We'll fix those problems
      and make another attempt soon, for the moment I think the safest is to
      revert.
      Signed-off-by: default avatarJ. Bruce Fields <bfields@redhat.com>
      0839ffb8
    • Linus Torvalds's avatar
      Merge tag 'drm-fixes-for-v4.10-rc8' of git://people.freedesktop.org/~airlied/linux · 3d88460d
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "This should be the final set of drm fixes for 4.10: one vmwgfx boot
        fix, one vc4 fix, and a few i915 fixes:
      
      * tag 'drm-fixes-for-v4.10-rc8' of git://people.freedesktop.org/~airlied/linux:
        drm: vc4: adapt to new behaviour of drm_crtc.c
        drm/i915: Always convert incoming exec offsets to non-canonical
        drm/i915: Remove overzealous fence warn on runtime suspend
        drm/i915/bxt: Add MST support when do DPLL calculation
        drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
        drm/i915: fix i915 running as dom0 under Xen
        drm/i915: Flush untouched framebuffers before display on !llc
        drm/i915: fix use-after-free in page_flip_completed()
        drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format
      3d88460d
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2017-02-09' of... · 697d3a21
      Dave Airlie authored
      Merge tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
      
      Hopefully final fixes for v4.10, about half of them stable material.
      
      * tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel:
        drm/i915: Always convert incoming exec offsets to non-canonical
        drm/i915: Remove overzealous fence warn on runtime suspend
        drm/i915/bxt: Add MST support when do DPLL calculation
        drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
        drm/i915: fix i915 running as dom0 under Xen
        drm/i915: Flush untouched framebuffers before display on !llc
        drm/i915: fix use-after-free in page_flip_completed()
      697d3a21
    • Dave Airlie's avatar
      Merge tag 'drm-misc-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes · 811b40c8
      Dave Airlie authored
      Last-minute vc4 fix for 4.10.
      
      * tag 'drm-misc-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
        drm: vc4: adapt to new behaviour of drm_crtc.c
      811b40c8
  6. 09 Feb, 2017 3 commits