Skip to content

L
linux
Switch branch/tag
  1. 25 Nov, 2012 1 commit
  3. 23 Nov, 2012 1 commit
  5. 21 Nov, 2012 1 commit
    • Benjamin Herrenschmidt's avatar
      Merge remote-tracking branch 'agust/merge' into merge · d6dc2461
      Benjamin Herrenschmidt authored 
      Anatolij 52xx updates:

Patch for pcm030 device tree fixing the probe() in pcm030-audio-fabric
driver. Changes to this driver have been merged in 3.7-rc1 via ASoC
tree, but this required device tree patch was submitted separately to
the linux-ppc list and is still missing in mainline. Without this patch
the probe() in pcm030-audio-fabric driver wrongly returns -ENODEV.

A patch from Wolfram fixing wrong invalid critical irq warnings for
all mpc5200 boards.

Another patch for all mpc5200 device trees fixing wrong L1 cell in
the LPB FIFO interrupt property and moving the LPB FIFO node to the
common mpc5200b.dtsi file so that this common node will be present
in all mpc5200 device trees.
      d6dc2461
  7. 01 Nov, 2012 1 commit
  9. 31 Oct, 2012 21 commits
  11. 30 Oct, 2012 15 commits
    • Linus Torvalds's avatar
      Merge tag 'gpio-fixes-v3.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · bc909421
      Linus Torvalds authored 
      Pull GPIO fixes from Linus Walleij:
 - Fix a potential bit wrap issue in the Timberdale driver
 - Fix up the buffer allocation size in the 74x164 driver
 - Set the value in direction_output() right in the mvebu driver
 - Return proper error codes for invalid GPIOs
 - Fix an off-mode bug for the OMAP
 - Don't initialize the mask_cach on the mvebu driver

* tag 'gpio-fixes-v3.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  GPIO: mvebu-gpio: Don't initialize the mask_cache
  gpio/omap: fix off-mode bug: clear debounce settings on free/reset
  gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpios
  gpio: mvebu: correctly set the value in direction_output()
  gpio-74x164: Fix buffer allocation size
  gpio-timberdale: fix a potential wrapping issue
      bc909421
    • Linus Torvalds's avatar
      Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 · 8c673cbc
      Linus Torvalds authored 
      Pull ext4 bugfix from Ted Ts'o:
 "This fixes the root cause of the ext4 data corruption bug which raised
  a ruckus on LWN, Phoronix, and Slashdot.

  This bug only showed up when non-standard mount options
  (journal_async_commit and/or journal_checksum) were enabled, and when
  the file system was not cleanly unmounted, but the root cause was the
  inode bitmap modifications was not being properly journaled.

  This could potentially lead to minor file system corruptions (pass 5
  complaints with the inode allocation bitmap) after an unclean shutdown
  under the wrong/unlucky workloads, but it turned into major failure if
  the journal_checksum and/or jouaral_async_commit was enabled."

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix unjournaled inode bitmap modification
      8c673cbc
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 4476c0ee
      Linus Torvalds authored 
      Pull block driver update from Jens Axboe:
 "Distilled down variant, the rest will pass over to 3.8.  I pulled it
  into the for-linus branch I had waiting for a pull request as well, in
  case you are wondering why there are new entries in here too.  This
  also got rid of two reverts and the ones of the mtip32xx patches that
  went in later in the 3.6 cycle, so the series looks a bit cleaner."

* 'for-linus' of git://git.kernel.dk/linux-block:
  loop: Make explicit loop device destruction lazy
  mtip32xx:Added appropriate timeout value for secure erase
  xen/blkback: Change xen_vbd's flush_support and discard_secure to have type unsigned int, rather than bool
  cciss: select CONFIG_CHECK_SIGNATURE
  cciss: remove unneeded memset()
  xen/blkback: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  pktcdvd: update MAINTAINERS
  floppy: remove dr, reuse drive on do_floppy_init
  floppy: use common function to check if floppies can be registered
  floppy: properly handle failure on add_disk loop
  floppy: do put_disk on current dr if blk_init_queue fails
  floppy: don't call alloc_ordered_workqueue inside the alloc_disk loop
  xen/blkback: Fix compile warning
  block: Add blk_rq_pos(rq) to sort rq when plushing
  drivers/block: remove CONFIG_EXPERIMENTAL
  block: remove CONFIG_EXPERIMENTAL
  vfs: fix: don't increase bio_slab_max if krealloc() fails
  blkcg: stop iteration early if root_rl is the only request list
  blkcg: Fix use-after-free of q->root_blkg and q->root_rl.blkg
      4476c0ee
    • Andrew Lunn's avatar
      GPIO: mvebu-gpio: Don't initialize the mask_cache · 8fcff5f1
      Andrew Lunn authored 
      Due to the SMP nature of some of the chips, which have per CPU
registers, the driver does not use the generic irq_gc_mask_set_bit() &
irq_gc_mask_clr_bit() functions, which only support a single register.
The driver has its own implementation of these functions, which can
pick the correct register depending on the CPU being used. The
functions do however use the gc->mask_cache value.

The call to irq_setup_generic_chip() was passing
IRQ_GC_INIT_MASK_CACHE, which caused the gc->mask_cache to be
initialized to the contents of some random register. This resulted in
unexpected interrupts been delivered from random GPIO lines.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarJamie Lentin <jm@lentin.co.uk>
Acked-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: default avatarMichael Walle <michael@walle.cc>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      8fcff5f1
    • Takashi Iwai's avatar
      ALSA: Avoid endless sleep after disconnect · 0914f796
      Takashi Iwai authored 
      When disconnect callback is called, each component should wake up
sleepers and check card->shutdown flag for avoiding the endless sleep
blocking the proper resource release.

Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      0914f796
    • Takashi Iwai's avatar
      ALSA: Add a reference counter to card instance · a0830dbd
      Takashi Iwai authored 
      For more strict protection for wild disconnections, a refcount is
introduced to the card instance, and let it up/down when an object is
referred via snd_lookup_*() in the open ops.

The free-after-last-close check is also changed to check this refcount
instead of the empty list, too.
Reported-by: default avatarMatthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      a0830dbd
    • Takashi Iwai's avatar
      ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c · 888ea7d5
      Takashi Iwai authored 
      Similar like the previous commit, cover with chip->shutdown_rwsem
and chip->shutdown checks.
Reported-by: default avatarMatthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      888ea7d5
    • Takashi Iwai's avatar
      ALSA: usb-audio: Use rwsem for disconnect protection · 34f3c89f
      Takashi Iwai authored 
      Replace mutex with rwsem for codec->shutdown protection so that
concurrent accesses are allowed.

Also add the protection to snd_usb_autosuspend() and
snd_usb_autoresume(), too.
Reported-by: default avatarMatthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      34f3c89f
    • Takashi Iwai's avatar
      ALSA: usb-audio: Fix races at disconnection · 978520b7
      Takashi Iwai authored 
      Close some races at disconnection of a USB audio device by adding the
chip->shutdown_mutex and chip->shutdown check at appropriate places.

The spots to put bandaids are:
- PCM prepare, hw_params and hw_free
- where the usb device is accessed for communication or get speed, in
 mixer.c and others; the device speed is now cached in subs->speed
 instead of accessing to chip->dev

The accesses in PCM open and close don't need the mutex protection
because these are already handled in the core PCM disconnection code.

The autosuspend/autoresume codes are still uncovered by this patch
because of possible mutex deadlocks.  They'll be covered by the
upcoming change to rwsem.

Also the mixer codes are untouched, too.  These will be fixed in
another patch, too.
Reported-by: default avatarMatthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      978520b7
    • Takashi Iwai's avatar
      ALSA: PCM: Fix some races at disconnection · 9b0573c0
      Takashi Iwai authored 
      Fix races at PCM disconnection:
- while a PCM device is being opened or closed
- while the PCM state is being changed without lock in prepare,
  hw_params, hw_free ops
Reported-by: default avatarMatthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      9b0573c0
    • Dave Chinner's avatar
      loop: Make explicit loop device destruction lazy · a1ecac3b
      Dave Chinner authored 
      xfstests has always had random failures of tests due to loop devices
failing to be torn down and hence leaving filesytems that cannot be
unmounted. This causes test runs to immediately stop.

Over the past 6 or 7 years we've added hacks like explicit unmount
-d commands for loop mounts, losetup -d after unmount -d fails, etc,
but still the problems persist.  Recently, the frequency of loop
related failures increased again to the point that xfstests 259 will
reliably fail with a stray loop device that was not torn down.

That is despite the fact the test is above as simple as it gets -
loop 5 or 6 times running mkfs.xfs with different paramters:

        lofile=$(losetup -f)
        losetup $lofile "$testfile"
        "$MKFS_XFS_PROG" -b size=512 $lofile >/dev/null || echo "mkfs failed!"
        sync
        losetup -d $lofile

And losteup -d $lofile is failing with EBUSY on 1-3 of these loops
every time the test is run.

Turns out that blkid is running simultaneously with losetup -d, and
so it sees an elevated reference count and returns EBUSY.  But why
is blkid running? It's obvious, isn't it? udev has decided to try
and find out what is on the block device as a result of a creation
notification. And it is racing with mkfs, so might still be scanning
the device when mkfs finishes and we try to tear it down.

So, make losetup -d force autoremove behaviour. That is, when the
last reference goes away, tear down the device. xfstests wants it
*gone*, not causing random teardown failures when we know that all
the operations the tests have specifically run on the device have
completed and are no longer referencing the loop device.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      a1ecac3b
    • Selvan Mani's avatar
      mtip32xx:Added appropriate timeout value for secure erase · 4453bc88
      Selvan Mani authored 
      Added appropriate timeout value for secure erase based on identify device data
Signed-off-by: default avatarAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: default avatarSelvan Mani <smani@micron.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      4453bc88
    • Oliver Chick's avatar
      xen/blkback: Change xen_vbd's flush_support and discard_secure to have type... · 1f999572
      Oliver Chick authored 
      xen/blkback: Change xen_vbd's flush_support and discard_secure to have type unsigned int, rather than bool

Changing the type of bdev parameters to be unsigned int :1, rather than bool.
This is more consistent with the types of other features in the block drivers.
Signed-off-by: default avatarOliver Chick <oliver.chick@citrix.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1f999572
    • Akinobu Mita's avatar
      cciss: select CONFIG_CHECK_SIGNATURE · b7010ede
      Akinobu Mita authored 
      The patch cciss-use-check_signature.patch in -mm tree introduced
a build error:

drivers/built-in.o: In function `CISS_signature_present':
drivers/block/cciss.c:4270: undefined reference to `check_signature'

Add missing CONFIG_CHECK_SIGNATURE to fix this issue.
Reported-by: default avatarFengguang Wu <wfg@linux.intel.com>
Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Cc: Fengguang Wu <wfg@linux.intel.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: default avatar"Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b7010ede
    • Wei Yongjun's avatar
      cciss: remove unneeded memset() · 2541aa79
      Wei Yongjun authored 
      The memory return by kzalloc() or kmem_cache_zalloc() has already be set
to zero, so remove useless memset(0).

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: default avatarWei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      2541aa79
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7