s/slots slots/slots/
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[elver: commit message]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Add volatile current->state to list of implicitly atomic accesses. This
is in preparation to eventually enable KCSAN on kernel/sched (which
currently still has KCSAN_SANITIZE := n).

Since accesses that match the special check in atomic.h are rare, it
makes more sense to move this check to the slow-path, avoiding the
additional compare in the fast-path. With the microbenchmark, a speedup
of ~6% is measured.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Adds CONFIG_KCSAN_VERBOSE to optionally enable more verbose reports.
Currently information about the reporting task's held locks and IRQ
trace events are shown, if they are enabled.
Signed-off-by: Marco Elver <elver@google.com>
Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Add option to allow interrupts while a watchpoint is set up. This can be
enabled either via CONFIG_KCSAN_INTERRUPT_WATCHER or via the boot
parameter 'kcsan.interrupt_watcher=1'.

Note that, currently not all safe per-CPU access primitives and patterns
are accounted for, which could result in false positives. For example,
asm-generic/percpu.h uses plain operations, which by default are
instrumented. On interrupts and subsequent accesses to the same
variable, KCSAN would currently report a data race with this option.

Therefore, this option should currently remain disabled by default, but
may be enabled for specific test scenarios.

To avoid new warnings, changes all uses of smp_processor_id() to use the
raw version (as already done in kcsan_found_watchpoint()). The exact SMP
processor id is for informational purposes in the report, and
correctness is not affected.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Previously the system would lock up if ftrace was enabled together with
KCSAN. This is due to recursion on reporting if the tracer code is
instrumented with KCSAN.

To avoid this for all types of tracing, disable KCSAN instrumentation
for all of kernel/trace.

Furthermore, since KCSAN relies on udelay() to introduce delay, we have
to disable ftrace for udelay() (currently done for x86) in case KCSAN is
used together with lockdep and ftrace. The reason is that it may corrupt
lockdep IRQ flags tracing state due to a peculiar case of recursion
(details in Makefile comment).
Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Qian Cai <cai@lca.pw>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This introduces ASSERT_EXCLUSIVE_BITS(var, mask).
ASSERT_EXCLUSIVE_BITS(var, mask) will cause KCSAN to assume that the
following access is safe w.r.t. data races (however, please see the
docbook comment for disclaimer here).

For more context on why this was considered necessary, please see:

  http://lkml.kernel.org/r/1580995070-25139-1-git-send-email-cai@lca.pw

In particular, before this patch, data races between reads (that use
@mask bits of an access that should not be modified concurrently) and
writes (that change ~@mask bits not used by the readers) would have been
annotated with "data_race()" (or "READ_ONCE()"). However, doing so would
then hide real problems: we would no longer be able to detect harmful
races between reads to @mask bits and writes to @mask bits.

Therefore, by using ASSERT_EXCLUSIVE_BITS(var, mask), we accomplish:

  1. Avoid proliferation of specific macros at the call sites: by
     including a single mask in the argument list, we can use the same
     macro in a wide variety of call sites, regardless of how and which
     bits in a field each call site actually accesses.

  2. The existing code does not need to be modified (although READ_ONCE()
     may still be advisable if we cannot prove that the data race is
     always safe).

  3. We catch bugs where the exclusive bits are modified concurrently.

  4. We document properties of the current code.
Acked-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Qian Cai <cai@lca.pw>

When setting up an access mask with kcsan_set_access_mask(), KCSAN will
only report races if concurrent changes to bits set in access_mask are
observed. Conveying access_mask via a separate call avoids introducing
overhead in the common-case fast-path.
Acked-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Introduces kcsan_value_change type, which explicitly points out if we
either observed a value-change (TRUE), or we could not observe one but
cannot rule out a value-change happened (MAYBE). The MAYBE state can
either be reported or not, depending on configuration preferences.

A follow-up patch introduces the FALSE state, which should never be
reported.

No functional change intended.
Acked-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

No we longer have to include kcsan.h, since the required KCSAN interface
for both compiler.h and seqlock.h are now provided by kcsan-checks.h.
Acked-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This moves functions that affect state changing the behaviour of
kcsan_check_access() to kcsan-checks.h. Since these are likely used with
kcsan_check_access() it makes more sense to have them in kcsan-checks.h,
to avoid including all of 'include/linux/kcsan.h'.

No functional change intended.
Acked-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

If there are at least 4 threads racing on the same address, it can
happen that one of the readers may observe another matching reader in
other_info. To avoid locking up, we have to consume 'other_info'
regardless, but skip the report. See the added comment for more details.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This adds early_boot, udelay_{task,interrupt}, and skip_watch as module
params. The latter parameters are useful to modify at runtime to tune
KCSAN's performance on new systems. This will also permit auto-tuning
these parameters to maximize overall system performance and KCSAN's race
detection ability.

None of the parameters are used in the fast-path and referring to them
via static variables instead of CONFIG constants will not affect
performance.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Qian Cai <cai@lca.pw>

Add 'test=<iters>' option to KCSAN's debugfs interface to invoke KCSAN
checks on a dummy variable. By writing 'test=<iters>' to the debugfs
file from multiple tasks, we can generate real conflicts, and trigger
data race reports.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Introduces ASSERT_EXCLUSIVE_WRITER() and ASSERT_EXCLUSIVE_ACCESS(), which
may be used to assert properties of synchronization logic, where
violation cannot be detected as a normal data race.

Examples of the reports that may be generated:

    ==================================================================
    BUG: KCSAN: assert: race in test_thread / test_thread

    write to 0xffffffffab3d1540 of 8 bytes by task 466 on cpu 2:
     test_thread+0x8d/0x111
     debugfs_write.cold+0x32/0x44
     ...

    assert no writes to 0xffffffffab3d1540 of 8 bytes by task 464 on cpu 0:
     test_thread+0xa3/0x111
     debugfs_write.cold+0x32/0x44
     ...
    ==================================================================

    ==================================================================
    BUG: KCSAN: assert: race in test_thread / test_thread

    assert no accesses to 0xffffffffab3d1540 of 8 bytes by task 465 on cpu 1:
     test_thread+0xb9/0x111
     debugfs_write.cold+0x32/0x44
     ...

    read to 0xffffffffab3d1540 of 8 bytes by task 464 on cpu 0:
     test_thread+0x77/0x111
     debugfs_write.cold+0x32/0x44
     ...
    ==================================================================
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The KCSAN_ACCESS_ASSERT access type may be used to introduce dummy reads
and writes to assert certain properties of concurrent code, where bugs
could not be detected as normal data races.

For example, a variable that is only meant to be written by a single
CPU, but may be read (without locking) by other CPUs must still be
marked properly to avoid data races. However, concurrent writes,
regardless if WRITE_ONCE() or not, would be a bug. Using
kcsan_check_access(&x, sizeof(x), KCSAN_ACCESS_ASSERT) would allow
catching such bugs.

To support KCSAN_ACCESS_ASSERT the following notable changes were made:

  * If an access is of type KCSAN_ASSERT_ACCESS, disable various filters
    that only apply to data races, so that all races that KCSAN observes are
    reported.
  * Bug reports that involve an ASSERT access type will be reported as
    "KCSAN: assert: race in ..." instead of "data-race"; this will help
    more easily distinguish them.
  * Update a few comments to just mention 'races' where we do not always
    mean pure data races.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Instrumentation of arbitrary memory-copy functions, such as user-copies,
may be called with size of 0, which could lead to false positives.

To avoid this, add a comparison in check_access() for size==0, which
will be optimized out for constant sized instrumentation
(__tsan_{read,write}N), and therefore not affect the common-case
fast-path.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This patch cleans up the rules of the 'KCSAN' Kconfig option by:

  1. implicitly selecting 'STACKTRACE' instead of depending on it;
  2. depending on DEBUG_KERNEL, to avoid accidentally turning KCSAN on if
     the kernel is not meant to be a debug kernel;
  3. updating the short and long summaries.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Clarify difference between options KCSAN_IGNORE_ATOMICS and
KCSAN_ASSUME_PLAIN_WRITES_ATOMIC in help text.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This adds option KCSAN_ASSUME_PLAIN_WRITES_ATOMIC. If enabled, plain
aligned writes up to word size are assumed to be atomic, and also not
subject to other unsafe compiler optimizations resulting in data races.

This option has been enabled by default to reflect current kernel-wide
preferences.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>

This replaces the KASAN instrumentation with generic instrumentation,
implicitly adding KCSAN instrumentation support.

For KASAN no functional change is intended.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This replaces the kasan instrumentation with generic instrumentation,
implicitly adding KCSAN instrumentation support.

For KASAN no functional change is intended.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Add explicit KCSAN checks for bitops.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This switches atomic-instrumented.h to use the generic instrumentation
wrappers provided by instrumented.h.

No functional change intended.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This adds instrumented.h, which provides generic wrappers for memory
access instrumentation that the compiler cannot emit for various
sanitizers. Currently this unifies KASAN and KCSAN instrumentation. In
future this will also include KMSAN instrumentation.

Note that, copy_{to,from}_user should use special instrumentation, since
we should be able to instrument both source and destination memory
accesses if both are kernel memory.

The current patch only instruments the memory access where the address
is always in kernel space, however, both may in fact be kernel addresses
when a compat syscall passes an argument allocated in the kernel to a
real syscall. In a future change, both KASAN and KCSAN should check both
addresses in such cases, as well as KMSAN will make use of both
addresses. [It made more sense to provide the completed function
signature, rather than updating it and changing all locations again at a
later time.]
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Even with KCSAN_REPORT_VALUE_CHANGE_ONLY, KCSAN still reports data
races between reads and watchpointed writes, even if the writes wrote
values already present.  This commit causes KCSAN to unconditionally
skip reporting in this case.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

We must avoid any recursion into lockdep if KCSAN is enabled on utilities
used by lockdep. One manifestation of this is corruption of lockdep's
IRQ trace state (if TRACE_IRQFLAGS), resulting in spurious warnings
(see below).  This commit fixes this by:

1. Using raw_local_irq{save,restore} in kcsan_setup_watchpoint().
2. Disabling lockdep in kcsan_report().

Tested with:

  CONFIG_LOCKDEP=y
  CONFIG_DEBUG_LOCKDEP=y
  CONFIG_TRACE_IRQFLAGS=y

This fix eliminates spurious warnings such as the following one:

    WARNING: CPU: 0 PID: 2 at kernel/locking/lockdep.c:4406 check_flags.part.0+0x101/0x220
    Modules linked in:
    CPU: 0 PID: 2 Comm: kthreadd Not tainted 5.5.0-rc1+ #11
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
    RIP: 0010:check_flags.part.0+0x101/0x220
    <snip>
    Call Trace:
     lock_is_held_type+0x69/0x150
     freezer_fork+0x20b/0x370
     cgroup_post_fork+0x2c9/0x5c0
     copy_process+0x2675/0x3b40
     _do_fork+0xbe/0xa30
     ? _raw_spin_unlock_irqrestore+0x40/0x50
     ? match_held_lock+0x56/0x250
     ? kthread_park+0xf0/0xf0
     kernel_thread+0xa6/0xd0
     ? kthread_park+0xf0/0xf0
     kthreadd+0x321/0x3d0
     ? kthread_create_on_cpu+0x130/0x130
     ret_from_fork+0x3a/0x50
    irq event stamp: 64
    hardirqs last  enabled at (63): [<ffffffff9a7995d0>] _raw_spin_unlock_irqrestore+0x40/0x50
    hardirqs last disabled at (64): [<ffffffff992a96d2>] kcsan_setup_watchpoint+0x92/0x460
    softirqs last  enabled at (32): [<ffffffff990489b8>] fpu__copy+0xe8/0x470
    softirqs last disabled at (30): [<ffffffff99048939>] fpu__copy+0x69/0x470
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

KCSAN data-race reports can occur quite frequently, so much so as
to render the system useless.  This commit therefore adds support for
time-based rate-limiting KCSAN reports, with the time interval specified
by a new KCSAN_REPORT_ONCE_IN_MS Kconfig option.  The default is 3000
milliseconds, also known as three seconds.

Because KCSAN must detect data races in allocators and in other contexts
where use of allocation is ill-advised, a fixed-size array is used to
buffer reports during each reporting interval.  To reduce the number of
reports lost due to array overflow, this commit stores only one instance
of duplicate reports, which has the benefit of further reducing KCSAN's
console output rate.
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This commit adds access-type information to KCSAN's reports as follows:
"read", "read (marked)", "write", and "write (marked)".
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Prefer __always_inline for fast-path functions that are called outside
of user_access_save, to avoid generating UACCESS warnings when
optimizing for size (CC_OPTIMIZE_FOR_SIZE). It will also avoid future
surprises with compiler versions that change the inlining heuristic even
when optimizing for performance.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/58708908-84a0-0a81-a836-ad97e33dbb62@infradead.org

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Conflicts:
	arch/x86/purgatory/Makefile
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull arm64 fixes from Will Deacon:

 - Fix panic() when it occurs during secondary CPU startup

 - Fix "kpti=off" when KASLR is enabled

 - Fix howler in compat syscall table for vDSO clock_getres() fallback

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: compat: Fix syscall number of compat_clock_getres
  arm64: kpti: Fix "kpti=off" when KASLR is enabled
  arm64: smp: fix crash_smp_send_stop() behaviour
  arm64: smp: fix smp_send_stop() behaviour

Pull char/misc driver fixes from Greg KH:
 "Here are some small different driver fixes for 5.6-rc7:

   - binderfs fix, yet again

   - slimbus new device id added

   - hwtracing bugfixes for reported issues and a new device id

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  intel_th: pci: Add Elkhart Lake CPU support
  intel_th: Fix user-visible error codes
  intel_th: msu: Fix the unexpected state warning
  stm class: sys-t: Fix the use of time_after()
  slimbus: ngd: add v2.1.0 compatible
  binderfs: use refcount for binder control devices too

Pull staging/IIO fixes from Greg KH:
 "Here are a number of small staging and IIO driver fixes for 5.6-rc7

  Nothing major here, just resolutions for some reported problems:
   - iio bugfixes for a number of different drivers
   - greybus loopback_test fixes
   - wfx driver fixes

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
  staging: greybus: loopback_test: fix potential path truncations
  staging: greybus: loopback_test: fix potential path truncation
  staging: greybus: loopback_test: fix poll-mask build breakage
  staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()
  staging: wfx: fix RCU usage in wfx_join_finalize()
  staging: wfx: make warning about pending frame less scary
  staging: wfx: fix lines ending with a comma instead of a semicolon
  staging: wfx: fix warning about freeing in-use mutex during device unregister
  staging/speakup: fix get_word non-space look-ahead
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt
  driver fix thrown in for good measure as well.

  These fixes are:
   - new device ids for usb-serial drivers
   - thunderbolt error code fix
   - xhci driver fixes
   - typec fixes
   - cdc-acm driver fixes
   - chipidea driver fix
   - more USB quirks added for devices that need them.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-acm: fix rounding error in TIOCSSERIAL
  USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
  usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
  usb: chipidea: udc: fix sleeping function called from invalid context
  USB: serial: pl2303: add device-id for HP LD381
  USB: serial: option: add ME910G1 ECM composition 0x110b
  usb: host: xhci-plat: add a shutdown
  usb: typec: ucsi: displayport: Fix a potential race during registration
  usb: typec: ucsi: displayport: Fix NULL pointer dereference
  USB: Disable LPM on WD19's Realtek Hub
  usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
  xhci: Do not open code __print_symbolic() in xhci trace events
  thunderbolt: Fix error code in tb_port_is_width_supported()

Pull tty fixes from Greg KH:
 "Here are three small tty_io bugfixes for reported issues that Eric has
  resolved for 5.6-rc7

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix compat TIOCGSERIAL checking wrong function ptr
  tty: fix compat TIOCGSERIAL leaking uninitialized memory
  tty: drop outdated comments about release_tty() locking

Pull sound fixes from Takashi Iwai:
 "A few fixes covering the issues reported by syzkaller, a couple of
  fixes for the MIDI decoding bug, and a few usual HD-audio quirks.

  Some of them are about ALSA core stuff, but they are small fixes just
  for corner cases, and nothing thrilling"

* tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
  ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
  ALSA: seq: oss: Fix running status after receiving sysex
  ALSA: seq: virmidi: Fix running status after receiving sysex
  ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
  ALSA: hda/realtek: Fix pop noise on ALC225
  ALSA: line6: Fix endless MIDI read loop
  ALSA: pcm: oss: Avoid plugin buffer overflow

Pull drm fixes from Dave Airlie:
 "Hope you are well hiding out above the garage. A few amdgpu changes
  but nothing too major. I've had a wisdom tooth out this week so
  haven't been to on top of things, but all seems good.

  core:
   - fix lease warning

  i915:
   - Track active elements during dequeue
   - Fix failure to handle all MCR ranges
   - Revert unnecessary workaround

  amdgpu:
   - Pageflip fix
   - VCN clockgating fixes
   - GPR debugfs fix for umr
   - GPU reset fix
   - eDP fix for MBP
   - DCN2.x fix

  dw-hdmi:
   - fix AVI frame colorimetry

  komeda:
   - fix compiler warning

  bochs:
   - downgrade a binding failure to a warning"

* tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fix pageflip event race condition for DCN.
  drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check
  drm/amdgpu: fix typo for vcn2/jpeg2 idle check
  drm/amdgpu: fix typo for vcn1 idle check
  drm/lease: fix WARNING in idr_destroy
  drm/i915: Handle all MCR ranges
  Revert "drm/i915/tgl: Add extra hdc flush workaround"
  drm/i915/execlists: Track active elements during dequeue
  drm/bochs: downgrade pci_request_region failure from error to warning
  drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
  drm/amdgpu: add fbdev suspend/resume on gpu reset
  drm/amd/amdgpu: Fix GPR read from debugfs (v2)
  drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct
  drm/komeda: mark PM functions as __maybe_unused
  drm/bridge: dw-hdmi: fix AVI frame colorimetry

Merge tag 'drm-intel-fixes-2020-03-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc7:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877dzgepvu.fsf@intel.com