Skip to content

L
linux
Switch branch/tag
  1. 21 May, 2014 3 commits
  3. 20 May, 2014 3 commits
  5. 19 May, 2014 2 commits
  7. 14 May, 2014 1 commit
  9. 13 May, 2014 1 commit
  11. 07 May, 2014 1 commit
  13. 05 May, 2014 3 commits
    • Anssi Hannula's avatar
      ALSA: hda - hdmi: Set infoframe and channel mapping even without sink · 561a7d6e
      Anssi Hannula authored 
      Currently infoframe contents and channel mapping are only set when a
sink (monitor) is present.

However, this does not make much sense, since
1) We can make a very reasonable guess on CA after 18e39186 ("ALSA:
   hda - hdmi: Fallback to ALSA allocation when selecting CA") or by
   relying on a previously valid ELD (or we may be using a
   user-specified channel map).
2) Not setting infoframe contents and channel count simply means they
   are left at a possibly incorrect state - playback is still allowed
   to proceed (with missing or wrongly mapped channels).

Reasons for monitor_present being 0 include disconnected cable, video
driver issues, or codec not being spec-compliant. Note that in
actual disconnected-cable case it should not matter if these settings
are wrong as they will be re-set after jack detection, though.

Change the behavior to allow the infoframe contents and the channel
mapping to be set even without a sink/monitor, either based on the
previous valid ELD contents, if any, or based on sensible defaults
(standard channel layouts or provided custom map, sink type HDMI).
Signed-off-by: default avatarAnssi Hannula <anssi.hannula@iki.fi>
Tested-by: default avatarStephan Raue <stephan@openelec.tv>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      561a7d6e
    • Takashi Iwai's avatar
      Merge branch 'for-linus' into for-next · 59991da4
      Takashi Iwai authored 
      ... for applying the further HDMI fixes.
      59991da4
    • Anssi Hannula's avatar
      ALSA: hda - hdmi: Set converter channel count even without sink · f06ab794
      Anssi Hannula authored 
      Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel
count") channel count is no longer being set if monitor_present is 0.
This is because setting the count was moved after the CA value is
determined, which is only after the monitor_present check in
hdmi_setup_audio_infoframe().

Unfortunately, in some cases, such as with a non-spec-compliant codec or
with a problematic video driver, monitor_present is always 0. As a
specific example, this seems to happen with gen1 ATV (SiI1390 codec),
causing left-channel-only stereo playback (multi-channel playback has
apparently never worked with this codec despite it reporting 8 channels,
reason unknown).

Simply setting converter channel count without setting the pin infoframe
and channel mapping as well does not theoretically make much sense as
this will just mean they are out-of-sync and multichannel playback will
have a wrong channel mapping.

However, adding back just setting the converter channel count even in
no-monitor case is the safest change which at least fixes the stereo
playback regression on SiI1390 codec. Do that.
Signed-off-by: default avatarAnssi Hannula <anssi.hannula@iki.fi>
Reported-by: default avatarStephan Raue <stephan@openelec.tv>
Tested-by: default avatarStephan Raue <stephan@openelec.tv>
Cc: <stable@vger.kernel.org> # 3.12+
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      f06ab794
  15. 02 May, 2014 4 commits
  17. 30 Apr, 2014 1 commit
  19. 29 Apr, 2014 3 commits
  21. 28 Apr, 2014 6 commits
  23. 22 Apr, 2014 5 commits
  25. 21 Apr, 2014 1 commit
    • Jarkko Nikula's avatar
      ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrol · 2697e4fb
      Jarkko Nikula authored 
      Commit 9e1fda4ae158 ("ASoC: dapm: Implement mixer input auto-disable")
is trying to free the widget it allocated by snd_soc_dapm_new_control()
call in dapm_kcontrol_data_alloc() by adding kfree(data->widget) to
dapm_kcontrol_free().

This is causing a widget double free with auto-disabled DAPM kcontrols
in sound card unregistration because widgets are already freed before
dapm_kcontrol_free() is called.

Reason for that is all widgets are added into dapm->card->widgets list
in snd_soc_dapm_new_control() and freed in dapm_free_widgets() during
execution of snd_soc_dapm_free().

Now snd_soc_dapm_free() calls for different DAPM contexts happens before
snd_card_free() call from where the call chain to dapm_kcontrol_free()
begins:

soc_cleanup_card_resources()
  soc_remove_dai_links()
    soc_remove_link_dais()
      snd_soc_dapm_free(&cpu_dai->dapm)
    soc_remove_link_components()
      soc_remove_platform()
        snd_soc_dapm_free(&platform->dapm)
      soc_remove_codec()
        snd_soc_dapm_free(&codec->dapm)
  snd_soc_dapm_free(&card->dapm)
  snd_card_free()
    snd_card_do_free()
      snd_device_free_all()
        snd_device_free()
          snd_ctl_dev_free()
            snd_ctl_remove()
              snd_ctl_free_one()
                dapm_kcontrol_free()

This wasn't making harm with ordinary DAPM kcontrols since data->widget is NULL for
them.

Fixes: 9e1fda4ae158 (ASoC: dapm: Implement mixer input auto-disable)
Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
      2697e4fb
  27. 20 Apr, 2014 5 commits
  29. 19 Apr, 2014 1 commit
    • Adrien BAK's avatar
      perf tools: Improve error reporting · ffa91880
      Adrien BAK authored 
      In the current version, when using perf record, if something goes
wrong in tools/perf/builtin-record.c:375
  session = perf_session__new(file, false, NULL);

The error message:
"Not enough memory for reading per file header"

is issued. This error message seems to be outdated and is not very
helpful. This patch proposes to replace this error message by
"Perf session creation failed"

I believe this issue has been brought to lkml:
https://lkml.org/lkml/2014/2/24/458
although this patch only tackles a (small) part of the issue.

Additionnaly, this patch improves error reporting in
tools/perf/util/data.c open_file_write.

Currently, if the call to open fails, the user is unaware of it.
This patch logs the error, before returning the error code to
the caller.
Reported-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarAdrien BAK <adrien.bak@metascale.org>
Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast
[ Reorganize the changelog into paragraphs ]
[ Added empty line after fd declaration in open_file_write ]
Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
      ffa91880
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7