- 07 Nov, 2015 2 commits
-
-
Jarod Wilson authored
The bonding driver saves a copy of slaves' original mac address and then assigns whatever mac as needed to the slave, depending on mode. In at least modes 5 and 6 (balance-tlb, balance-alb), it often ends up being the mac address of another slave. On release from the bond, the original mac address is supposed to get restored via a dev_set_mac_address() call in the bonding driver's __bond_release_one() function, which calls the slave's ndo_set_mac_address function, which for qlcnic, is qlcnic_set_mac(). Now, this function tries to be somewhat intelligent and exit early if you're trying to set the mac address to the same thing that is already set. The problem here is that adapter->mac_addr isn't in sync with netdev->dev_addr. The qlcnic driver still has the original mac stored in adapter->mac_addr, while the bonding driver has updated netdev->dev_addr, so qlcnic thinks we're trying to set the same address it already has. I think the way to go here, since the function updates both netdev and adapter's stored mac addresses, is to check if either of them doesn't match the newly requested mac. Simply checking netdev's value only could result in a similar mismatch and non-update, so look at both. CC: Dept-GELinuxNICDev@qlogic.com CC: netdev@vger.kernel.org CC: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Markus Elfring authored
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
- 05 Nov, 2015 37 commits
-
-
Eric Dumazet authored
In commit e446f9df ("net: synack packets can be attached to request sockets"), I missed one remaining case of invalid skb->sk->sk_security access. Dmitry Vyukov got a KASan report pointing to it. Add selinux_skb_sk() helper that is responsible to get back to the listener if skb is attached to a request socket, instead of duplicating the logic. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Paul Moore <paul@paul-moore.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes. Miscellaneous small bug fixes. ==================== Signed-off-by: -
Jeffrey Huang authored
Instead of always calling pci_sriov_disable() in remove_one(), the driver should detect whether VFs are currently assigned to the VMs. If the VFs are active in VMs, then it should not disable SRIOV as it is catastrophic to the VMs. Instead, it just leaves the VFs alone and continues to unload the PF. The user can then cleanup the VMs even after the PF driver has been unloaded. Signed-off-by:
Jeffrey Huang <huangjw@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Assign the return value from bitmap_find_free_region() to an integer variable and check for negative error codes first, before assigning the bit ID to the unsigned sw_id field. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jeffrey Huang authored
In order to use offset 0x4014 for reading CAG interrupt status, the actual CAG register must be mapped to GRC bar0 window #4. Otherwise, the driver is reading garbage. This patch corrects this issue. Signed-off-by:
-
Michael Chan authored
The profile ID in the completion record needs to be ANDed with the profile ID mask of 0x1f. This bug was causing the SKB hash type and the gso_type to be wrong in some cases. Signed-off-by:
-
Jeffrey Huang authored
Fix the sp event bits to be bit positions instead of bit values since the bit helper functions are expecting the former. Signed-off-by:
-
Eric Dumazet authored
I mistakenly took wrong request sock pointer when calling tcp_move_syn() @req_unhash is either a copy of @req, or a NULL value for FastOpen connexions (as we do not expect to unhash the temporary request sock from ehash table) Fixes: 805c4bc0 ("tcp: fix req->saved_syn race") Signed-off-by:
-
Francesco Ruggeri authored
There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by:Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
-
Eric Dumazet authored
Before converting a 'socket pointer' into inet socket, use sk_fullsock() to detect timewait or request sockets. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
-
Eric Dumazet authored
For the reasons explained in commit ce105008 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access req->saved_syn unless we own the request sock. This fixes races for listeners using TCP_SAVE_SYN option. Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Ying Cai <ycai@google.com> Signed-off-by:
-
LABBE Corentin authored
The variable phy_iface is double-initialized to itself. This patch remove that. Reported-by: coverity (CID 1271141) Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
-
Dan Carpenter authored
We accidentally return success instead of -ENOMEM here. Fixes: fe56b9e6 ('qed: Add module with basic common support') Signed-off-by:
-
Vivien Didelot authored
The DSA documentation specifies that each port must be capable of forwarding frames to the CPU port. The last changes on bridging support for the mv88e6xxx driver broke this requirement for non-bridged ports. So as for the bridged ports, reserve a few VLANs (4000+) in the switch to isolate ports that have not been bridged yet. By default, a port will be isolated with the CPU and DSA ports. When the port joins a bridge, it will leave its reserved port. When it is removed from a bridge, it will join its reserved VLAN again. Fixes: 5fe7f680 ("net: dsa: mv88e6xxx: fix hardware bridging") Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Petr Štetiar authored
This device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout where EC20 has QMI on interface 4 instead of 0. lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by:
Petr Štetiar <ynezz@true.cz> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2015-11-05 The following set of Bluetooth patches would be good to get into 4.4-rc1 if possible: - Fix for missing LE CoC parameter validity checks - Fix for potential deadlock in btusb - Fix for issuing unsupported commands during HCI init Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: -
Yang Shi authored
When running "mod X" operation, if X is 0 the filter has to be halt. Add new test cases to cover A = A mod X if X is 0, and A = A mod 1. CC: Xi Wang <xi.wang@gmail.com> CC: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Zi Shen Lim <zlim.lnx@gmail.com> Acked-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
VXLAN may be a loadable module, and this driver cannot be built-in in that case, or we get a link error: drivers/built-in.o: In function `__bnxt_open_nic': drivers/net/ethernet/broadcom/bnxt/bnxt.c:4581: undefined reference to `vxlan_get_rx_port' This adds a Kconfig dependency that ensures that either VXLAN is disabled (which the driver handles correctly), or we depend on VXLAN itself and disallow built-in compilation when VXLAN is a module. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Acked-by:
-
Jiri Pirko authored
Fixes: fee6d4c7 ("net: Add netif_is_l3_slave") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Sabrina Dubroca authored
In ipv6_add_dev, when addrconf_sysctl_register fails, we do not clean up the dev_snmp6 entry that we have already registered for this device. Call snmp6_unregister_dev in this case. Fixes: a317a2f1 ("ipv6: fail early when creating netdev named all or default") Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Dan Carpenter authored
MODE_MF_SI is 9. We should be testing bit 9 instead of AND 0x9. Fixes: fe56b9e6 ('qed: Add module with basic common support') Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Dan Carpenter authored
We check if "p_hwfn" is NULL and then dereference it in the error handling code. I read the code and it isn't NULL so let's remove the check. Signed-off-by:
-
Johan Hedberg authored
When receiving a connect response we should make sure that the DCID is within the valid range and that we don't already have another channel allocated for the same DCID. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The 'dyn_end' value is also a valid CID so it should be included in the range of values checked. Signed-off-by:
-
Johan Hedberg authored
The core spec defines specific response codes for situations when the received CID is incorrect. Add the defines for these and return them as appropriate from the LE Connect Request handler function. Signed-off-by:
-
Marcel Holtmann authored
The white list commands might not be implemented if the controller does not actually support the white list. So check the supported commands first before issuing these commands. Not supporting the white list is the same as supporting a white list with zero size. Signed-off-by:
-
Kuba Pawlak authored
commit 8f9d02f4 introduced spinlocks in btusb_work. This is run in a context of a worqueue and can be interrupted by hardware irq. If it happens while spinlock is held, we have a deadlock. Solution is to use _irqsave/_resore version of locking [ 466.460560] ================================= [ 466.460565] [ INFO: inconsistent lock state ] [ 466.460572] 4.3.0-rc6+ #1 Tainted: G W [ 466.460576] --------------------------------- [ 466.460582] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 466.460589] kworker/0:2/94 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 466.460595] (&(&data->rxlock)->rlock){?.-...}, at: [<ffffffffa0526923>] btusb_work+0xa3/0x3fd [btusb] [ 466.460621] {IN-HARDIRQ-W} state was registered at: [ 466.460625] [<ffffffff811021b5>] __lock_acquire+0xc45/0x1e80 [ 466.460638] [<ffffffff811040d5>] lock_acquire+0xe5/0x1f0 [ 466.460646] [<ffffffff8182f108>] _raw_spin_lock+0x38/0x50 [ 466.460657] [<ffffffffa0525448>] btusb_recv_intr+0x38/0x170 [btusb] [ 466.460668] [<ffffffffa0525626>] btusb_intr_complete+0xa6/0x130 [btusb] [ 466.460679] [<ffffffff815d8f1e>] __usb_hcd_giveback_urb+0x8e/0x160 [ 466.460690] [<ffffffff815d911f>] usb_hcd_giveback_urb+0x3f/0x120 [ 466.460698] [<ffffffff81606e4d>] uhci_giveback_urb+0xad/0x280 [ 466.460706] [<ffffffff81608f64>] uhci_scan_schedule.part.33+0x6b4/0xbe0 [ 466.460714] [<ffffffff81609b50>] uhci_irq+0xd0/0x180 [ 466.460722] [<ffffffff815d8296>] usb_hcd_irq+0x26/0x40 [ 466.460729] [<ffffffff81117d40>] handle_irq_event_percpu+0x40/0x300 [ 466.460739] [<ffffffff81118040>] handle_irq_event+0x40/0x60 [ 466.460746] [<ffffffff8111af39>] handle_fasteoi_irq+0x89/0x150 [ 466.460754] [<ffffffff8101e0f3>] handle_irq+0x73/0x120 [ 466.460763] [<ffffffff81832f11>] do_IRQ+0x61/0x120 [ 466.460772] [<ffffffff8183084c>] ret_from_intr+0x0/0x31 [ 466.460780] [<ffffffff81697a77>] cpuidle_enter+0x17/0x20 [ 466.460790] [<ffffffff810f62c2>] call_cpuidle+0x32/0x60 [ 466.460800] [<ffffffff810f65a8>] cpu_startup_entry+0x2b8/0x3f0 [ 466.460807] [<ffffffff818214ca>] rest_init+0x13a/0x140 [ 466.460817] [<ffffffff81f76029>] start_kernel+0x4a3/0x4c4 [ 466.460827] [<ffffffff81f75339>] x86_64_start_reservations+0x2a/0x2c [ 466.460837] [<ffffffff81f75485>] x86_64_start_kernel+0x14a/0x16d [ 466.460846] irq event stamp: 754913 [ 466.460851] hardirqs last enabled at (754913): [<ffffffff8182f4cc>] _raw_spin_unlock_irq+0x2c/0x40 [ 466.460861] hardirqs last disabled at (754912): [<ffffffff8182f28d>] _raw_spin_lock_irq+0x1d/0x60 [ 466.460869] softirqs last enabled at (753024): [<ffffffff810aeaa0>] __do_softirq+0x380/0x490 [ 466.460880] softirqs last disabled at (753009): [<ffffffff810aedef>] irq_exit+0x10f/0x120 [ 466.460888] other info that might help us debug this: [ 466.460894] Possible unsafe locking scenario: [ 466.460899] CPU0 [ 466.460903] ---- [ 466.460907] lock(&(&data->rxlock)->rlock); [ 466.460915] <Interrupt> [ 466.460918] lock(&(&data->rxlock)->rlock); [ 466.460926] *** DEADLOCK *** [ 466.460935] 2 locks held by kworker/0:2/94: [ 466.460939] #0: ("events"){.+.+.+}, at: [<ffffffff810c69bb>] process_one_work+0x16b/0x660 [ 466.460958] #1: ((&data->work)){+.+...}, at: [<ffffffff810c69bb>] process_one_work+0x16b/0x660 [ 466.460974] Signed-off-by:
Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by:
-
Stefan Hajnoczi authored
When a listen socket enqueues a connection for userspace to accept(), the sk->sk_data_ready() callback should be invoked. In-kernel socket users rely on this callback to detect when incoming connections are available. Currently the sk->sk_state_change() callback is invoked by vmci_transport.c. This happens to work for userspace applications since sk->sk_state_change = sock_def_wakeup() and sk->sk_data_ready = sock_def_readable() both wake up the accept() waiter. In-kernel socket users, on the other hand, fail to detect incoming connections. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Tobias Klauser authored
In tun_dst_unclone() the return value of skb_metadata_dst() is checked for being NULL after it is dereferenced. Fix this by moving the dereference after the NULL check. Found by the Coverity scanner (CID 1338068). Fixes: fc4099f1 ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Jarod Wilson authored
With moving netdev_sync_lower_features() after the .ndo_set_features calls, I neglected to verify that devices added *after* a flag had been disabled on an upper device were properly added with that flag disabled as well. This currently happens, because we exit __netdev_update_features() when we see dev->features == features for the upper dev. We can retain the optimization of leaving without calling .ndo_set_features with a bit of tweaking and a goto here. Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Reported-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
A bug report (https://bugzilla.kernel.org/show_bug.cgi?id=107071) noted that the follwoing ip command is failing with v4.3: $ ip route add 10.248.5.0/24 dev bond0.250 table vlan_250 src 10.248.5.154 RTNETLINK answers: Invalid argument 021dd3b8 changed the lookup of the given preferred source address to use the table id passed in, but this assumes the local entries are in the given table which is not necessarily true for non-VRF use cases. When validating the preferred source fallback to the local table on failure. Fixes: 021dd3b8 ("net: Add routes to the table associated with the device") Signed-off-by:
-
WANG Cong authored
Sasha reported the following lockdep warning: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_INET); lock(rtnl_mutex); lock(sk_lock-AF_INET); lock(rtnl_mutex); This is due to that for IP_MSFILTER and MCAST_MSFILTER, we take rtnl lock before the socket lock in setsockopt() path, but take the socket lock before rtnl lock in getsockopt() path. All the rest optnames are setsockopt()-only. Fix this by aligning the getsockopt() path with the setsockopt() path, so that all mcast socket path would be locked in the same order. Note, IPv6 part is different where rtnl lock is not held. Fixes: 54ff9ef3 ("ipv4, ipv6: kill ip_mc_{join, leave}_group and ipv6_sock_mc_{join, drop}") Reported-by:Sasha Levin <sasha.levin@oracle.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
WANG Cong authored
This fixes the following lockdep warning: [ INFO: inconsistent lock state ] 4.3.0-rc7+ #1197 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. sysctl/1019 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&net->ipv4.ip_local_ports.lock)->seqcount){+.+-..}, at: [<ffffffff81921de7>] ipv4_local_port_range+0xb4/0x12a {IN-SOFTIRQ-R} state was registered at: [<ffffffff810bd682>] __lock_acquire+0x2f6/0xdf0 [<ffffffff810be6d5>] lock_acquire+0x11c/0x1a4 [<ffffffff818e599c>] inet_get_local_port_range+0x4e/0xae [<ffffffff8166e8e3>] udp_flow_src_port.constprop.40+0x23/0x116 [<ffffffff81671cb9>] vxlan_xmit_one+0x219/0xa6a [<ffffffff81672f75>] vxlan_xmit+0xa6b/0xaa5 [<ffffffff817f2deb>] dev_hard_start_xmit+0x2ae/0x465 [<ffffffff817f35ed>] __dev_queue_xmit+0x531/0x633 [<ffffffff817f3702>] dev_queue_xmit_sk+0x13/0x15 [<ffffffff818004a5>] neigh_resolve_output+0x12f/0x14d [<ffffffff81959cfa>] ip6_finish_output2+0x344/0x39f [<ffffffff8195bf58>] ip6_finish_output+0x88/0x8e [<ffffffff8195bfef>] ip6_output+0x91/0xe5 [<ffffffff819792ae>] dst_output_sk+0x47/0x4c [<ffffffff81979392>] NF_HOOK_THRESH.constprop.30+0x38/0x82 [<ffffffff8197981e>] mld_sendpack+0x189/0x266 [<ffffffff8197b28b>] mld_ifc_timer_expire+0x1ef/0x223 [<ffffffff810de581>] call_timer_fn+0xfb/0x28c [<ffffffff810ded1e>] run_timer_softirq+0x1c7/0x1f1 Fixes: b8f1a556 ("udp: Add function to make source port for UDP tunnels") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: -
Sergei Shtylyov authored
While the ring allocation is done by a single function, sh_eth_ring_init(), the ring deallocation was split into two functions (almost always called one after the other) for no good reason. Merge sh_eth_free_dma_buffer() into sh_eth_ring_free() which allows us to save space not only on the direct calls of the former function but also on the sh_eth_ring_init()'s simplified error path... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
The 'ret' local variable in sh_eth_ring_init() serves no useful purpose as the only values it gets assigned are 0 and -ENOMEM both of which could be returned directly... Signed-off-by:
-
Markus Brunner authored
Add support for a fixed-link devicetree sub-node in case the the cpsw MAC is directly connected to a non-mdio PHY/device. Signed-off-by:
Markus Brunner <systemprogrammierung.brunner@gmail.com> Acked-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Conflicts: net/netfilter/xt_TEE.c Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix crash when TEE target is used with no --oif, from Eric Dumazet. 2) Oneliner to fix a crash on the redirect traffic to localhost infrastructure when interface has not yet an address, from Munehisa Kamata. 3) Oneliner not to request module all the time from nfnetlink due to wrong type value, from Florian Westphal. I'll make sure these patches 1 and 2 hit -stable. ==================== The conflict in net/netfilter/xt_TEE.c was minor, a change to the 'oif' selection overlapping a function signature change for the nf_dup_ipv{4,6}() routines. Signed-off-by:
-
- 04 Nov, 2015 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds authored
Pull IDE fixlet from David Miller: "Just a y2038 fix to the pdc202xx_new IDE driver" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: pdc202xx_new: Replace timeval with ktime_t
-
