- 25 Sep, 2019 9 commits
-
-
Vandita Kulkarni authored
Add a new function to write to dkl phy pll registers. As per the bspec all the registers are read modify write. Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Lucas De Marchi authored
The disable function can be the same as for MG phy since the same registers are used. The others are different as registers changed, also adding a empty dkl_pll_write() to be implemented later. v2: Setting the right HIP_INDEX_REG bits (José) v3: Masking non-computed registers of mg_pll_tdc_coldst_bias when getting hardware state Sharing mg_pll_enable() with TGL Reviewed-by:
Imre Deak <imre.deak@intel.com> Acked-by:
-
Chris Wilson authored
Having decided that we only care about the promotion predicate, we can simplify gen12_csb_parse to simply check whether we need to jump to a new queue. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190925130845.17952-1-chris@chris-wilson.co.uk
-
Maarten Lankhorst authored
We cannot switch between HQ and normal mode on GLK+, so only add planes on platforms where it makes sense. We could probably restrict it even more to only add when scaler users toggles between 1 and 2, but lets just leave it for now. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190920114235.22411-9-maarten.lankhorst@linux.intel.comReviewed-by:
Matt Roper <matthew.d.roper@intel.com>
-
Maarten Lankhorst authored
Rename linked_plane to planar_linked_plane and slave to planar_slave, this will make it easier to keep apart bigjoiner linking and planar plane linking. Signed-off-by:
-
Maarten Lankhorst authored
We had this as an optimization to not do a plane update, but we killed it off because there are so many reasons we may have to do a plane update or fastset that it's best to just assume everything changed. Signed-off-by:
-
Maarten Lankhorst authored
Readout the FEC state in encoder->get_config(), this will allow us to ensure that we can correctly inherit the state from boot, and that we set FEC during modeset. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Maarten Lankhorst authored
There was a integer wraparound when mode_clock became too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3. As a result our calculated bpp was way too high, and the link width limitation never came into effect. Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again. We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled. This fixes the FIFO underrun we are seeing with FEC enabled. Changes since v2: - Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville) - Fix initial hardware readout for FEC. (Ville) Changes since v3: - Remove bogus fec_to_mode_clock. (Ville) Changes since v4: - Use the correct register for icl. (Ville) - Split hw readout to a separate patch. Signed-off-by:
-
Swati Sharma authored
This reverts commit 84af7649. This is causing problems with the display, displays are all bright colors. Fixes: 84af7649 ("drm/i915/color: Extract icl_read_luts()") Signed-off-by:
Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190924135820.11850-1-swati2.sharma@intel.com
-
- 24 Sep, 2019 5 commits
-
-
Chris Wilson authored
If we disable rps, it appears the Tigerlake is stable enough to run multiple engines simultaneously in CI. As disabling rps should only cause the execution to be slow, whereas many features depend on the different engines, we would prefer to have the engines enabled while the machine hangs are being debugged. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111714Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190924173501.21956-1-chris@chris-wilson.co.uk
-
Ankit Nautiyal authored
Currently the offset for PIPE D cursor control register is missing in i915_reg.h due to which the cursor plane cannot be enabled for Pipe D. This also causes kernel Warning, when a user requests to enable cursor plane for PIPE D for Gen 12 platforms. This patch adds the CURSOR_CTL_D register in the i915_reg.h. v2: Rebase Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111640Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by:
-
Chris Wilson authored
Before we submit the first context to HW, we need to construct a valid image of the register state. This layout is defined by the HW and should match the layout generated by HW when it saves the context image. Asserting that this should be equivalent should help avoid any undefined behaviour and verify that we haven't missed anything important! Of course, having insisted that the initial register state within the LRC should match that returned by HW, we need to ensure that it does. v2: Drop the RELATIVE_MMIO flag from gen11, we ignore it for constructing the lrc image. Signed-off-by:
-
Stanislav Lisovskiy authored
Added bandwidth calculation algorithm and checks, similar way as it was done for ICL, some constants were corrected according to BSpec 53998. v2: Start using same icl_get_bw_info function to avoid code duplication. Moved mpagesize to memory info related structure as it is now dependent on memory type. Fixed qi.t_bl field assignment. v3: Removed mpagesize as unused. Duplicate code and redundant blankline fixed. v4: Changed ordering of IS_GEN checks as agreed. Minor commit message fixes. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111600Reviewed-by:James Ausmus <james.ausmus@intel.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Chris Wilson authored
Since dropping the set-to-gtt-domain in commit a679f58d ("drm/i915: Flush pages on acquisition"), we no longer mark the contents as dirty on a write fault. This has the issue of us then not marking the pages as dirty on releasing the buffer, which means the contents are not written out to the swap device (should we ever pick that buffer as a victim). Notably, this is visible in the dumb buffer interface used for cursors. Having updated the cursor contents via mmap, and swapped away, if the shrinker should evict the old cursor, upon next reuse, the cursor would be invisible. E.g. echo 80 > /proc/sys/kernel/sysrq ; echo f > /proc/sysrq-trigger Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111541 Fixes: a679f58d ("drm/i915: Flush pages on acquisition") Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190920121821.7223-1-chris@chris-wilson.co.uk
-
- 23 Sep, 2019 26 commits
-
-
Chris Wilson authored
Force bonded requests to run on distinct engines so that they cannot be shuffled onto the same engine where timeslicing will reverse the order. A bonded request will often wait on a semaphore signaled by its master, creating an implicit dependency -- if we ignore that implicit dependency and allow the bonded request to run on the same engine and before its master, we will cause a GPU hang. [Whether it will hang the GPU is debatable, we should keep on timeslicing and each timeslice should be "accidentally" counted as forward progress, in which case it should run but at one-half to one-third speed.] We can prevent this inversion by restricting which engines we allow ourselves to jump to upon preemption, i.e. baking in the arrangement established at first execution. (We should also consider capturing the implicit dependency using i915_sched_add_dependency(), but first we need to think about the constraints that requires on the execution/retirement ordering.) Fixes: 8ee36e04 ("drm/i915/execlists: Minimalistic timeslicing") References: ee113690 ("drm/i915/execlists: Virtual engine bonding") Testcase: igt/gem_exec_balancer/bonded-slice Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Due to the nature of preempt-to-busy the execlists active tracking and the schedule queue may become temporarily desync'ed (between resubmission to HW and its ack from HW). This means that we may have unwound a request and passed it back to the virtual engine, but it is still inflight on the HW and may even result in a GPU hang. If we detect that GPU hang and try to reset, the hanging request->engine will no longer match the current engine, which means that the request is not on the execlists active list and we should not try to find an older incomplete request. Given that we have deduced this must be a request on a virtual engine, it is the single active request in the context and so must be guilty (as the context is still inflight, it is prevented from being executed on another engine as we process the reset). Fixes: 22b7a426 ("drm/i915/execlists: Preempt-to-busy") Signed-off-by:
-
Chris Wilson authored
As preempt-to-busy leaves the request on the HW as the resubmission is processed, that request may complete in the background and even cause a second virtual request to enter queue. This second virtual request breaks our "single request in the virtual pipeline" assumptions. Furthermore, as the virtual request may be completed and retired, we lose the reference the virtual engine assumes is held. Normally, just removing the request from the scheduler queue removes it from the engine, but the virtual engine keeps track of its singleton request via its ve->request. This pointer needs protecting with a reference. v2: Drop unnecessary motion of rq->engine = owner Fixes: 22b7a426 ("drm/i915/execlists: Preempt-to-busy") Signed-off-by:
-
José Roberto de Souza authored
New step added for TGL, required for us to check the TC microcontroller health after power on TC aux. BSpec: 49294 Reviewed-by:
-
José Roberto de Souza authored
Adding a enable parameters allow us to share most of the code between enable and disable functions. v3: Renamed icl_phy_clock_gating() to icl_phy_set_clock_gating() Reviewed-by:
-
Vandita Kulkarni authored
These are the registers needed to program Dekel phy. Some register definitions will be reused from MG PHY definitions, so adding a comment on those. Bspec: 49295 Reviewed-by:
Clinton A Taylor <clinton.a.taylor@intel.com> Signed-off-by:
-
Clinton A Taylor authored
Commit 24a7bfe0 ("drm/i915: Keep the TypeC port mode fixed when the port is active") added this new hook while in parallel TGL upstream was happening and this was missed. Without this driver will crash when TC DDI is added and driver is preparing to do a full modeset. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
José Roberto de Souza authored
If platform supports and has modular FIA is enabled, the registers bits also change, example: reading TC3 registers with modular FIA enabled, driver should read from FIA2 but with TC1 bits offsets. It is described in BSpec 50231 for DFLEXDPSP, other registers don't have the BSpec description but testing in real hardware have proven that it had moved for all other registers too. v2: - Caching index in tc_phy_fia_idx, instead of calculate it each time v3: - Setting tc_phy_fia and tc_phy_fia_idx in the same function Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Clinton A Taylor authored
Step 4.b was complete missed because it is only required to TC and TBT. Bspec: 49190 Reviewed-by:
-
Chris Wilson authored
Pull setting -EIO on the hung requests into its own utility function. Having allowed ourselves to short-circuit submission of completed requests, we can now do the mark_eio() prior to submission and avoid some redundant operations. Signed-off-by:
-
Chris Wilson authored
If we are asked to submit a completed request, just move it onto the active-list without modifying it's payload. If we try to emit the modified payload of a completed request, we risk racing with the ring->head update during retirement which may advance the head past our breadcrumb and so we generate a warning for the emission being behind the RING_HEAD. v2: Commentary for the sneaky, shared responsibility between functions. v3: Spelling mistakes and bonus assertion Signed-off-by:
-
Chris Wilson authored
Since amalgamating the queued and active lists in commit 422d7df4 ("drm/i915: Replace engine->timeline with a plain list"), performing a i915_request_submit() will remove the request from the execlists priority queue. References: 422d7df4 ("drm/i915: Replace engine->timeline with a plain list") Signed-off-by:
-
Chris Wilson authored
A gpu hang can occur at any time, given a sufficiently angry gpu. An example is when it forgets to perform a context-switch at the end of a request, leaving us with a hanging GPU on a completed request. Here, we may retire the request, only leaving its context alive via the active barrier. When we reset the GPU on a completed request, we do not modify its context image (just updating the ring state) and can safely defer the assertion that we have the image pinned and ready to modify. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111639 Fixes: dffa8feb ("drm/i915/perf: Assert locking for i915_init_oa_perf_state()") Signed-off-by:
-
Jani Nikula authored
In general, prefer struct drm_i915_private * over struct drm_device * when either will do. Rename the local variables to i915. No functional changes. Reviewed-by:
-
Jani Nikula authored
The i915 specific mode config init code is too specific and detailed to have open in a high level function. Abstract away. No functional changes. v2: nest drm_mode_config_init() in the function too (Chris) Reviewed-by:
-
Jani Nikula authored
The code is too specific and detailed to have open in a high level function. Abstract away. As a drive-by improvement switch to using enableddisabled() in logging and git rid of a redundant !!. No functional changes. v2: drop the !! while at it too (Chris) Reviewed-by:
-
Jani Nikula authored
In general, prefer struct drm_i915_private * over struct drm_device * when either will do. Rename the local variable to i915. Also propagate to intel_hpd_poll_fini(). No functional changes. Reviewed-by:
-
Jani Nikula authored
In general, prefer struct drm_i915_private * over struct drm_device * when either will do. Rename the local variable to i915. No functional changes. Reviewed-by:
-
Jani Nikula authored
For completeness, add counterpart to i915_driver_modeset_probe() and remove the asymmetry in the probe/remove parts. No functional changes. Reviewed-by:
-
Kai Vehmanen authored
When audio power domain is suspended, the display driver must save state of AUD_FREQ_CNTRL on Tiger Lake and Ice Lake systems. The initial value of the register is set by BIOS and is read by driver during the audio component init sequence. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Animesh Manna authored
Added docbook info regarding Display State Buffer(DSB) which is added from gen12 onwards to batch submit display HW programming. v1: Initial version as RFC. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Signed-off-by:
-
Animesh Manna authored
Enabling DSB by setting 1 to has_dsb flag for gen12. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
-
Animesh Manna authored
Gamma lut programming can be programmed using DSB where bulk register programming can be done using indexed register write which takes number of data and the mmio offset to be written. Currently enabled for 12-bit gamma LUT which is enabled by default and later 8-bit/10-bit will be enabled in future based on need. v1: Initial version. v2: Directly call dsb-api at callsites. (Jani) v3: - modified the code as per single dsb instance per crtc. (Shashank) - Added dsb get/put call in platform specific load_lut hook. (Jani) - removed dsb pointer from dev_priv. (Jani) v4: simplified code by dropping ref-count implementation. (Shashank) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Animesh Manna authored
Batch buffer will be created through dsb-reg-write function which can have single/multiple request based on usecase and once the buffer is ready commit function will trigger the execution of the batch buffer. All the registers will be updated simultaneously. v1: Initial version. v2: Optimized code few places. (Chris) v3: USed DRM_ERROR for dsb head/tail programming failure. (Shashank) v4: reset ins_start_offset after commit. (Jani) Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
-
Animesh Manna authored
DSB will be used for performance improvement for some special scenario. DSB engine will be enabled based on need and after completion of its work will be disabled. Api added for enable/disable operation by using DSB_CTRL register. v1: Initial version. v2: POSTING_READ added after writing control register. (Shashank) v3: cosmetic changes done. (Shashank) Cc: Michel Thierry <michel.thierry@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
-
Animesh Manna authored
As per bspec check for DSB status before programming any of its register. Inline function added to check the dsb status. Cc: Michel Thierry <michel.thierry@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
-
