- 03 Jun, 2004 10 commits
-
-
James Bottomley authored
On Wed, 2004-05-19 at 05:38, Herbert Xu wrote: > This is a resend of my patch that adds basic support for highmem > on i386 to the advansys driver. It has been tested in > http://bugs.debian.org/245238. > > The maintainer email address listed in the MAINTAINERS file bounced > so someone else will need to look at this. I converted your patch to use the DMA-API. This will be necessary to use the EISA advansys boards---Of course, EISA won't work properly until the entire driver is converted to the driverfs probing API, sigh, but I'll get around to that eventually. OK, and I couldn't resist getting rid of the stupid in_isr locking on the done function. Converted from original patch by Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
again, the init code could use some bigger rework, but let's stick to the minimal fix until we have some testers. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
I'd love to rework the init sequence a bit more, but without beeing able to actually test the driver I'd rather stick to the bulletproof fix. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
Original patch from http://marc.theaimsgroup.com/?l=linux-scsi&m=107428662718579&w=2 reworked to according to James' suggestion to handle NO_SENSE the same as RECOVERED_ERROR. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
megaraid does sleep_on_timeout on a stack waitq - use msleep instead. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Guennadi Liakhovetski authored
On Sun, 23 May 2004, Christoph Hellwig wrote: > The other thing is that most calls to dc390_findDCB could probably be > replaced with stroing the pDCB in scsi_device->hostdata on slave_alloc, > but that could aswell be done in an incremental patch. Done in the attached patch. Tested as usual and a bit harder. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
This patch has been floating around for ages, got reminded of it again when looking at the debian kernel package. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Adam Radford authored
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Adam Radford authored
Here is an updated version v2.26.00.009 of the 3ware 9000 SATA-RAID driver. Changes in this release: - Convert driver to pci_driver format. - Remove proc interface, add sysfs attributes. - Return SCSI_MLQUEUE_HOST_BUSY when card status is busy. Future versions may include: - PAE fix - 80 column wrap fixes - Remove more prototypes by re-ordering functions. - sysfs queue depth adjustment instead of module_param Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
- 01 Jun, 2004 1 commit
-
-
James Bottomley authored
-
- 31 May, 2004 12 commits
-
-
bk://gkernel.bkbits.net/net-drivers-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Matthew Wilcox authored
This patch improves some of the handling of PA-RISC tulip cards. - Introduce HAS_SWAPPED_SEEPROM and NEEDS_FAKE_MEDIA_TABLE - Only trigger this code on GSC machines. The pure PCI machines don't have these cards. - Allow the chip_name to be overridden in tulip_init_one(). - Fix some indentation. - Handle the output from tulip_read_eeprom() better.
-
Krzysztof Halasa authored
> From: Ralf Baechle <ralf@linux-mips.org> > Subject: [PATCH] Stop queue on close in hdlcdrv > To: Jeff Garzik <garzik@gtf.org> > Date: Tue, 4 May 2004 13:59:15 +0200 > > The stop method of a driver should ensure queueing is stopped ... > > diff -u -r1.19 hdlcdrv.c > --- suckage/drivers/net/hamradio/hdlcdrv.c 12 Apr 2004 20:23:32 -0000 the above means the following is needed for my drivers - please apply to 2.6:
-
Christoph Hellwig authored
i386 gets it implicitly from somewhere but some architectures don't. Also move <asm/uaccess.h> down so we have asm after linux headers.
-
Andrew Morton authored
s2io_rem_nic() is marked __exit and is being referred to from .data. Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Andrew Morton authored
From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br> drivers/net/ixgb/ixgb_main.c: In function `ixgb_intr': drivers/net/ixgb/ixgb_main.c:1593: warning: unused variable `hw' (catch by J. Cherry). This happens because `hw' is only used when CONFIG_IXGB_NAPI is not set. As `hw' is used only to have the code readable, we can use it for !CONFIG_IXGB_NAPI too. Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Jeff Garzik authored
into redhat.com:/spare/repo/net-drivers-2.6
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
-
bk://kernel.bkbits.net/davem/bluetooth-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
http://linux-mh.bkbits.net/bluetooth-2.6David S. Miller authored
into kernel.bkbits.net:/home/davem/bluetooth-2.6
-
- 01 Jun, 2004 6 commits
-
-
Marcel Holtmann authored
Some RTX Telecom based USB dongles offer SCO support, but their implementation is broken. This patch disables the use of the ISOC interface for these devices.
-
Marcel Holtmann authored
If no channel is specified for a RFCOMM server socket, it will search for the next free one and automaticly bind to it. Proposed by Stephen Crane <steve.crane@rococosoft.com>
-
Marcel Holtmann authored
If no PSM is specified for a L2CAP server socket, it will search for the next free one and automaticly bind to it. Proposed by Stephen Crane <steve.crane@rococosoft.com>
-
Marcel Holtmann authored
This patch allocates the next free protocol number for the upcoming HIDP support.
-
Marcel Holtmann authored
This patch updates the address of the BlueZ project and changes some wording of the help entries.
-
Marcel Holtmann authored
Since we are using Bitkeeper the CVS tags are useless. This patch removes them and makes some whitespace cleanups.
-
- 31 May, 2004 11 commits
-
-
Marcel Holtmann authored
With Linux 2.6 there is no need to keep the function exports in a central file and thus the use of syms.c makes no real sense. Remove it and add the EXPORT_SYMBOL calls to the functions they belong to.
-
bk://bk.arm.linux.org.uk/linux-2.6-pcmciaLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
The timing calculations used by the PXA platforms did not always take account of the timings handed to us by PCMCIA, and where it did, it assumed IO timings for memory windows. We fix this, and provide a generic function which calculates the required timings (in nanoseconds) for IO, memory and attribute windows. The SOC drivers only have to convert this information to whatever format the hardware requires to achieve at least these timing parameters.
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
-
Russell King authored
Some machines decided to initialise this element. It's not necessary since find_memend_and_nodes() initialises this itself. However, 'end' is not required if we initialise high_memory in this function rather than waiting until mem_init() is called.
-
David S. Miller authored
-
Andrew Morton authored
From: Eugene Surovegin <ebs@ebshome.net> Put back DECLARE_PCI_UNMAP_??? and friends accidentaly removed during DMA API reorganization. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/sparc-2.6
-
David S. Miller authored
-
Linus Torvalds authored
explcitly. sparse doesn't set any arch defines itself.
-