- 29 Apr, 2008 20 commits
-
-
Barry Naujok authored
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30913a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
The VFS always has an inode reference when we call these functions. So we only need to grab a signle reference to each inode that's joined to a transaction - all the other bumping and dropping is as useless as the comments describing the IRIX semantics. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30912a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
VFS guaranteed these can't happen. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30911a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
Similar to to the previous patch for remove and rmdir only grab a reference to inodes when we join them to transaction to balance the decrement on transaction completion. Everything else it taken care of by the VFS. Note that the old case had leaks of inode count when src == target or src or target == one of the parent inodes, but these cases are fortunately already rejected by the VFS. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30904a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
->rename already gets the target inode passed if it exits. Pass it down to xfs_rename so that we can avoid looking it up again. Also simplify locking as the first lock section in xfs_rename can go away now: the isdir is an invariant over the lifetime of the inode, and new_parent and the nlink check are namespace topology protected by i_mutex in the VFS. The projid check needs to move into the second lock section anyway to not be racy. Also kill the now unused xfs_dir_lookup_int and remove the now-unused first_locked argumet to xfs_lock_inodes. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30903a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
The writer field is not needed for non_DEBU builds so remove it. While we're at i also clean up the interface for is locked asserts to go through and xfs_iget.c helper with an interface like the xfs_ilock routines to isolated the XFS codebase from mrlock internals. That way we can kill mrlock_t entirely once rw_semaphores grow an islocked facility. Also remove unused flags to the ilock family of functions. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30902a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
Opencode xfs-kill-xfs_dir_lookup_int here, which gets rid of a lock roundtrip, and lots of stack space. Also kill the di_mode == 0 check that has been done in xfs_iget for a few years now. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30901a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
Similar to rmdir and remove - avoids a potential transaction reservation overrun. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30900a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
Unless XFS_IGET_CREATE is passed xfs_iget will return ENOENT if it encounters an inode with di_mode == 0. Remove the duplicated checks in the callers. (the log recovery case is not touched for now) SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30898a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
It's currently used by the ACL code to read di_mode/di_uid, but these are simple 32bit scalar values we can just read directly without locking. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30897a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Christoph Hellwig authored
We can just check i_mode / di_mode directly. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30896a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
-
Harvey Harrison authored
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
drivers/media/video/v4l2-common.c:719:16: warning: Using plain integer as NULL pointer drivers/media/video/au0828/au0828-dvb.c:122:19: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1101:22: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1102:23: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-audio.c:78:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-video-v4l.c:84:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-v4l2.c:1264:9: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-context.c:197:28: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c:126:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:133:32: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:145:31: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:177:55: warning: Using plain integer as NULL pointer drivers/media/video/videobuf-core.c:100:9: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
drivers/scsi/aic7xxx/aic7770_osm.c:53:58: warning: Using plain integer as NULL pointer drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:355:47: warning: Using plain integer as NULL pointer drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:372:55: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:997:28: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:1003:28: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:1165:46: warning: Using plain integer as NULL pointer drivers/scsi/fdomain.c:1446:40: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:1650:51: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:3171:42: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:5732:52: warning: Using plain integer as NULL pointer drivers/scsi/ncr53c8xx.c:8189:31: warning: Using plain integer as NULL pointer drivers/scsi/ncr53c8xx.c:8225:34: warning: Using plain integer as NULL pointer drivers/scsi/dpt_i2o.c:156:32: warning: Using plain integer as NULL pointer drivers/scsi/ultrastor.c:954:42: warning: Using plain integer as NULL pointer drivers/scsi/ultrastor.c:1104:18: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (35 commits) siimage: coding style cleanup (take 2) ide-cd: clean up cdrom_analyze_sense_data() ide-cd: fix test unsigned var < 0 ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[] piix: add Asus Eee 701 controller to short cable list ARM: always select HAVE_IDE remove the broken ETRAX_IDE driver ide: remove ->dma_prdtable field from ide_hwif_t ide: remove ->dma_vendor{1,3} fields from ide_hwif_t scc_pata: add ->dma_host_set and ->dma_start methods ide: skip "VLB sync" if host uses MMIO ide: add ide_pad_transfer() helper ide: remove ->INW and ->OUTW methods ide: use IDE I/O helpers directly in ide_tf_{load,read}() ns87415: add ->tf_read method scc_pata: add ->tf_{load,read} methods ide-h8300: add ->tf_{load,read} methods ide-cris: add ->tf_{load,read} methods ide: add ->tf_load and ->tf_read methods ide: move ide_tf_{load,read} to ide-iops.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kconfig: add named choice group kconfig: fix choice dependency check kconifg: 'select' considered less evil dontdiff: ignore timeconst.h dontdiff: add modules.order kbuild: fix unportability in gen_initramfs_list.sh kbuild: fix help output to show correct arch kbuild: show defconfig subdirs in make help kconfig: reversed borderlines in inputbox
-
Harvey Harrison authored
drivers/atm/nicstar.c:418:25: warning: Using plain integer as NULL pointer drivers/char/drm/r128_cce.c:820:25: warning: Using plain integer as NULL pointer drivers/char/tty_io.c:1183:10: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
mm/hugetlb.c:207:11: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
kernel/cpuset.c:1268:52: warning: Using plain integer as NULL pointer kernel/pid_namespace.c:95:24: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
init/do_mounts_rd.c:215:13: warning: Using plain integer as NULL pointer init/do_mounts_md.c:136:45: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Apr, 2008 20 commits
-
-
Sergei Shtylyov authored
Fix 18 errors and several warnings given by checkpatch.pl: - use of C99 // comments; - trailing whitespace; - 'switch' and 'case' not at the same indentation level; - no space before the open parenthesis of the 'if' and 'switch' statements; - space between function name and open parenthesis (though I have introduced such warnins in some places since the code looks prettier with the spaces); - including <asm/io.h> instead of <linux/io.h>; - line over 80 characters. In addition to these changes, also do the following: - make the arrays in sil_set_pio_mode() 'static', and make the arrays in sil_set_dma_mode() 'static const'; - change the string of the 'if' statements into the 'switch' statement in sil_pata_udma_filter(); - drop the needless '==' operators from the 'if' statements where a condition is a mere bit test; - remove needless initializer for the 'tmp' variable in init_chipset_siimage(); - beautify groups of the variable initializers and assignment operators; - add new line after variable definitions; - remove new line between the comment and the statements it refers to; - remove needless curly braces and parentheses; - fix typos, capitalize acronyms, etc. in the comments... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Roel Kluin authored
[bart: fix handling of bio_sectors(failed_command->bio) == 0] Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Roel Kluin authored
valid is unsigned and cannot be below 0. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Alexander Smal authored
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Based on ata_piix patch by Dan McGee. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Adrian Bunk authored
It's plain wrong for PCMCIA to select HAVE_IDE that implies e.g. the availability of an asm/ide.h It turns out this was done for ARM, and we can simply always select HAVE_IDE on ARM instead of manually tracking which platforms might possible have an IDE controller directly or indirectly. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Adrian Bunk authored
ETRAX_IDE was marked as broken last year with the comment "it doesn't even compile currently". Remove it since it won't get fixed in the near future. On Mon, Apr 14, 2008 at 02:50:19PM +0200, Mikael Starvik wrote: > You can remove it for now and we will resubmit a new if/when we get around > to fix it. [bart: ported it over IDE tree] Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Mikael Starvik <mikael.starvik@axis.com> Cc: Jesper Nilsson <Jesper.Nilsson@axis.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Use 'hwif->dma_base + {4,8}' instead of hwif->dma_prdtable in {ide,scc}_dma_setup(). * Remove no longer needed ->dma_prdtable field from ide_hwif_t. While at it: * Use ATA_DMA_TABLE_OFS define. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Use 'hwif->dma_base + {1,3}' instead of hwif->dma_vendor{1,3} in pdc202xx_new host driver. * Remove no longer needed ->dma_vendor{1,3} fields from ide_hwif_t. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->dma_host_set and ->dma_start methods (+ __scc_dma_end() helper) so scc_ide_{in,out}b() can be used directly. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Skip "VLB sync" in ata_{in,out}put_data() if host uses MMIO. * Use I/O ops directly in ata_vlb_sync() an drop no longer needed 'ide_drive_t *drive' argument. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Add ide_pad_transfer() helper (which uses ->{in,out}put_data methods internally so the transfer is also padded to drive+host requirements) and use it instead of ide_atapi_{write_zeros,discard_data}(). * Remove no longer needed ide_atapi_{write_zeros,discard_data}(). Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Remove no longer used ->INW and ->OUTW methods. While at it: * scc_pata.c: scc_ide_{out,in}w() is called only in scc_tf_{load,read}() so inline it there. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->tf_read method so out{b,w}(), in{b,w}() and superio_ide_inb() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->tf_{load,read} methods so scc_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->tf_{load,read} methods so outb()/inb() and mm_outw()/mm_inw() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ->tf_{load,read} methods so cris_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Add ->tf_load and ->tf_read methods to ide_hwif_t and set the default methods in default_hwif_transport(). * Use ->tf_{load,read} instead o calling ide_tf_{load,read}() directly. * Make ide_tf_{load,read}() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-